/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* stats */ static kstat_t *ipsec_ksp; ipsec_kstats_t *ipsec_kstats; /* The IPsec SADBs for AH and ESP */ sadbp_t ah_sadb, esp_sadb; /* Packet dropper for IP IPsec processing failures */ extern ipdropper_t ip_dropper; void ipsec_kstat_init(void) { ipsec_ksp = kstat_create("ip", 0, "ipsec_stat", "net", KSTAT_TYPE_NAMED, sizeof (*ipsec_kstats) / sizeof (kstat_named_t), KSTAT_FLAG_PERSISTENT); ASSERT(ipsec_ksp != NULL); ipsec_kstats = ipsec_ksp->ks_data; #define KI(x) kstat_named_init(&ipsec_kstats->x, #x, KSTAT_DATA_UINT64) KI(esp_stat_in_requests); KI(esp_stat_in_discards); KI(esp_stat_lookup_failure); KI(ah_stat_in_requests); KI(ah_stat_in_discards); KI(ah_stat_lookup_failure); KI(sadb_acquire_maxpackets); KI(sadb_acquire_qhiwater); #undef KI kstat_install(ipsec_ksp); } void ipsec_kstat_destroy(void) { kstat_delete(ipsec_ksp); } /* * Returns B_TRUE if the identities in the SA match the identities * in the "latch" structure. */ static boolean_t ipsec_match_outbound_ids(ipsec_latch_t *ipl, ipsa_t *sa) { ASSERT(ipl->ipl_ids_latched == B_TRUE); return ipsid_equal(ipl->ipl_local_cid, sa->ipsa_src_cid) && ipsid_equal(ipl->ipl_remote_cid, sa->ipsa_dst_cid); } /* * Look up a security association based on the unique ID generated by IP and * transport or tunnel information, such as ports and upper-layer protocol, * and the inner and outer address(es). Used for uniqueness testing and * outbound packets. The outer source address may be ignored. * * I expect an SA hash bucket, and that its per-bucket mutex is held. * The SA ptr I return will have its reference count incremented by one. */ ipsa_t * ipsec_getassocbyconn(isaf_t *bucket, ipsec_out_t *io, uint32_t *src, uint32_t *dst, sa_family_t af, uint8_t protocol) { ipsa_t *retval, *candidate; ipsec_action_t *candact; boolean_t need_unique; boolean_t tunnel_mode = io->ipsec_out_tunnel; uint64_t unique_id; uint32_t old_flags, excludeflags; ipsec_policy_t *pp = io->ipsec_out_policy; ipsec_action_t *actlist = io->ipsec_out_act; ipsec_action_t *act; ipsec_latch_t *ipl = io->ipsec_out_latch; ipsa_ref_t *ipr = NULL; sa_family_t inaf = io->ipsec_out_inaf; uint32_t *insrc = io->ipsec_out_insrc; uint32_t *indst = io->ipsec_out_indst; uint8_t insrcpfx = io->ipsec_out_insrcpfx; uint8_t indstpfx = io->ipsec_out_indstpfx; ASSERT(MUTEX_HELD(&bucket->isaf_lock)); /* * Caller must set ipsec_out_t structure such that we know * whether this is tunnel mode or transport mode based on * io->ipsec_out_tunnel. If this flag is set, we assume that * there are valid inner src and destination addresses to compare. */ /* * Fast path: do we have a latch structure, is it for this bucket, * and does the generation number match? If so, refhold and return. */ if (ipl != NULL) { ASSERT((protocol == IPPROTO_AH) || (protocol == IPPROTO_ESP)); ipr = &ipl->ipl_ref[protocol - IPPROTO_ESP]; retval = ipr->ipsr_sa; /* * NOTE: The isaf_gen check (incremented upon * sadb_unlinkassoc()) protects against retval being a freed * SA. (We're exploiting short-circuit evaluation.) */ if ((bucket == ipr->ipsr_bucket) && (bucket->isaf_gen == ipr->ipsr_gen) && (retval->ipsa_state != IPSA_STATE_DEAD) && !(retval->ipsa_flags & IPSA_F_CINVALID)) { IPSA_REFHOLD(retval); return (retval); } } ASSERT((pp != NULL) || (actlist != NULL)); if (actlist == NULL) actlist = pp->ipsp_act; ASSERT(actlist != NULL); need_unique = actlist->ipa_want_unique; unique_id = SA_FORM_UNIQUE_ID(io); /* * Precompute mask for SA flags comparison: If we need a * unique SA and an SA has already been used, or if the SA has * a unique value which doesn't match, we aren't interested in * the SA.. */ excludeflags = IPSA_F_UNIQUE; if (need_unique) excludeflags |= IPSA_F_USED; /* * Walk the hash bucket, matching on: * * - unique_id * - destination * - source * - algorithms * - inner dst * - inner src * - * * Make sure that wildcard sources are inserted at the end of the hash * bucket. * * DEFINITIONS: A _shared_ SA is one with unique_id == 0 and USED. * An _unused_ SA is one with unique_id == 0 and not USED. * A _unique_ SA is one with unique_id != 0 and USED. * An SA with unique_id != 0 and not USED never happens. */ candidate = NULL; for (retval = bucket->isaf_ipsa; retval != NULL; retval = retval->ipsa_next) { ASSERT((candidate == NULL) || MUTEX_HELD(&candidate->ipsa_lock)); /* * Q: Should I lock this SA? * A: For now, yes. I change and use too many fields in here * (e.g. unique_id) that I may be racing with other threads. * Also, the refcnt needs to be bumped up. */ mutex_enter(&retval->ipsa_lock); /* My apologies for the use of goto instead of continue. */ /* Outer destination address */ if (!IPSA_ARE_ADDR_EQUAL(dst, retval->ipsa_dstaddr, af)) goto next_ipsa; /* Destination mismatch. */ /* Outer source address */ if (!IPSA_ARE_ADDR_EQUAL(src, retval->ipsa_srcaddr, af) && !IPSA_IS_ADDR_UNSPEC(retval->ipsa_srcaddr, af)) goto next_ipsa; /* Specific source and not matched. */ if (tunnel_mode) { /* Check tunnel mode */ if (!(retval->ipsa_flags & IPSA_F_TUNNEL)) goto next_ipsa; /* Not tunnel mode SA */ /* Inner destination address */ if (!IPSA_IS_ADDR_UNSPEC(retval->ipsa_innerdst, inaf)) { if (!ip_addr_match((uint8_t *)indst, min(indstpfx, retval->ipsa_innerdstpfx), (in6_addr_t *)retval->ipsa_innerdst)) goto next_ipsa; /* not matched. */ } /* Inner source address */ if (!IPSA_IS_ADDR_UNSPEC(retval->ipsa_innersrc, inaf)) { if (!ip_addr_match((uint8_t *)insrc, min(insrcpfx, retval->ipsa_innersrcpfx), (in6_addr_t *)retval->ipsa_innersrc)) goto next_ipsa; /* not matched. */ } } else { /* Check transport mode */ if (retval->ipsa_flags & IPSA_F_TUNNEL) goto next_ipsa; /* Not transport mode SA */ /* * TODO - If we ever do RFC 3884's dream of transport- * mode SAs with inner IP address selectors, we need * to put some code here. */ } /* * XXX should be able to use cached/latched action * to dodge this loop */ for (act = actlist; act != NULL; act = act->ipa_next) { ipsec_act_t *ap = &act->ipa_act; if (ap->ipa_type != IPSEC_POLICY_APPLY) continue; /* * XXX ugly. should be better way to do this test */ if (protocol == IPPROTO_AH) { if (!(ap->ipa_apply.ipp_use_ah)) continue; if (ap->ipa_apply.ipp_auth_alg != retval->ipsa_auth_alg) continue; if (ap->ipa_apply.ipp_ah_minbits > retval->ipsa_authkeybits) continue; } else { if (!(ap->ipa_apply.ipp_use_esp)) continue; if ((ap->ipa_apply.ipp_encr_alg != retval->ipsa_encr_alg)) continue; if (ap->ipa_apply.ipp_espe_minbits > retval->ipsa_encrkeybits) continue; if (ap->ipa_apply.ipp_esp_auth_alg != 0) { if (ap->ipa_apply.ipp_esp_auth_alg != retval->ipsa_auth_alg) continue; if (ap->ipa_apply.ipp_espa_minbits > retval->ipsa_authkeybits) continue; } } /* * Check key mgmt proto, cookie */ if ((ap->ipa_apply.ipp_km_proto != 0) && (retval->ipsa_kmp != 0) && (ap->ipa_apply.ipp_km_proto != retval->ipsa_kmp)) continue; if ((ap->ipa_apply.ipp_km_cookie != 0) && (retval->ipsa_kmc != 0) && (ap->ipa_apply.ipp_km_cookie != retval->ipsa_kmc)) continue; break; } if (act == NULL) goto next_ipsa; /* nothing matched */ /* * Do identities match? */ if (ipl && ipl->ipl_ids_latched && !ipsec_match_outbound_ids(ipl, retval)) goto next_ipsa; /* * At this point, we know that we have at least a match on: * * - dest * - source (if source is specified, i.e. non-zeroes) * - inner dest (if specified) * - inner source (if specified) * - auth alg (if auth alg is specified, i.e. non-zero) * - encrypt. alg (if encrypt. alg is specified, i.e. non-zero) * and we know that the SA keylengths are appropriate. * * (Keep in mind known-src SAs are hit before zero-src SAs, * thanks to sadb_insertassoc().) * If we need a unique asssociation, optimally we have * ipsa_unique_id == unique_id, otherwise NOT USED * is held in reserve (stored in candidate). * * For those stored in candidate, take best-match (i.e. given * a choice, candidate should have non-zero ipsa_src). */ /* * If SA has a unique value which matches, we're all set... * "key management knows best" */ if ((retval->ipsa_flags & IPSA_F_UNIQUE) && ((unique_id & retval->ipsa_unique_mask) == retval->ipsa_unique_id)) break; /* * If we need a unique SA and this SA has already been used, * or if the SA has a unique value which doesn't match, * this isn't for us. */ if (retval->ipsa_flags & excludeflags) goto next_ipsa; /* * I found a candidate.. */ if (candidate == NULL) { /* * and didn't already have one.. */ candidate = retval; candact = act; continue; } else { /* * If candidate's source address is zero and * the current match (i.e. retval) address is * not zero, we have a better candidate.. */ if (IPSA_IS_ADDR_UNSPEC(candidate->ipsa_srcaddr, af) && !IPSA_IS_ADDR_UNSPEC(retval->ipsa_srcaddr, af)) { mutex_exit(&candidate->ipsa_lock); candidate = retval; candact = act; continue; } } next_ipsa: mutex_exit(&retval->ipsa_lock); } ASSERT((retval == NULL) || MUTEX_HELD(&retval->ipsa_lock)); ASSERT((candidate == NULL) || MUTEX_HELD(&candidate->ipsa_lock)); ASSERT((retval == NULL) || (act != NULL)); ASSERT((candidate == NULL) || (candact != NULL)); /* Let caller react to a lookup failure when it gets NULL. */ if (retval == NULL && candidate == NULL) return (NULL); if (retval == NULL) { ASSERT(MUTEX_HELD(&candidate->ipsa_lock)); retval = candidate; act = candact; } else if (candidate != NULL) { mutex_exit(&candidate->ipsa_lock); } ASSERT(MUTEX_HELD(&retval->ipsa_lock)); ASSERT(act != NULL); /* * Even though I hold the mutex, since the reference counter is an * atomic operation, I really have to use the IPSA_REFHOLD macro. */ IPSA_REFHOLD(retval); /* * This association is no longer unused. */ old_flags = retval->ipsa_flags; retval->ipsa_flags |= IPSA_F_USED; /* * Cache a reference to this SA for the fast path. */ if (ipr != NULL) { ipr->ipsr_bucket = bucket; ipr->ipsr_gen = bucket->isaf_gen; ipr->ipsr_sa = retval; /* I'm now caching, so the cache-invalid flag goes away! */ retval->ipsa_flags &= ~IPSA_F_CINVALID; } /* * Latch various things while we're here.. */ if (ipl != NULL) { if (!ipl->ipl_ids_latched) { ipsec_latch_ids(ipl, retval->ipsa_src_cid, retval->ipsa_dst_cid); } if (!ipl->ipl_out_action_latched) { IPACT_REFHOLD(act); ipl->ipl_out_action = act; ipl->ipl_out_action_latched = B_TRUE; } } /* * Set the uniqueness only first time. */ if (need_unique && !(old_flags & IPSA_F_USED)) { if (retval->ipsa_unique_id == 0) { ASSERT((retval->ipsa_flags & IPSA_F_UNIQUE) == 0); /* * From now on, only this src, dst[ports, addr], * proto, should use it. */ retval->ipsa_flags |= IPSA_F_UNIQUE; retval->ipsa_unique_id = unique_id; retval->ipsa_unique_mask = SA_UNIQUE_MASK( io->ipsec_out_src_port, io->ipsec_out_dst_port, protocol, 0); } /* * Set the source address and adjust the hash * buckets only if src_addr is zero. */ if (IPSA_IS_ADDR_UNSPEC(retval->ipsa_srcaddr, af)) { /* * sadb_unlinkassoc() will decrement the refcnt. Bump * up when we have the lock so that we don't have to * acquire locks when we come back from * sadb_insertassoc(). * * We don't need to bump the bucket's gen since * we aren't moving to a new bucket. */ IPSA_REFHOLD(retval); IPSA_COPY_ADDR(retval->ipsa_srcaddr, src, af); mutex_exit(&retval->ipsa_lock); sadb_unlinkassoc(retval); /* * Since the bucket lock is held, we know * sadb_insertassoc() will succeed. */ #ifdef DEBUG if (sadb_insertassoc(retval, bucket) != 0) { cmn_err(CE_PANIC, "sadb_insertassoc() failed in " "ipsec_getassocbyconn().\n"); } #else /* non-DEBUG */ (void) sadb_insertassoc(retval, bucket); #endif /* DEBUG */ return (retval); } } mutex_exit(&retval->ipsa_lock); return (retval); } /* * Look up a security association based on the security parameters index (SPI) * and address(es). This is used for inbound packets and general SA lookups * (even in outbound SA tables). The source address may be ignored. Return * NULL if no association is available. If an SA is found, return it, with * its refcnt incremented. The caller must REFRELE after using the SA. * The hash bucket must be locked down before calling. */ ipsa_t * ipsec_getassocbyspi(isaf_t *bucket, uint32_t spi, uint32_t *src, uint32_t *dst, sa_family_t af) { ipsa_t *retval; ASSERT(MUTEX_HELD(&bucket->isaf_lock)); /* * Walk the hash bucket, matching exactly on SPI, then destination, * then source. * * Per-SA locking doesn't need to happen, because I'm only matching * on addresses. Addresses are only changed during insertion/deletion * from the hash bucket. Since the hash bucket lock is held, we don't * need to worry about addresses changing. */ for (retval = bucket->isaf_ipsa; retval != NULL; retval = retval->ipsa_next) { if (retval->ipsa_spi != spi) continue; if (!IPSA_ARE_ADDR_EQUAL(dst, retval->ipsa_dstaddr, af)) continue; /* * Assume that wildcard source addresses are inserted at the * end of the hash bucket. (See sadb_insertassoc().) * The following check for source addresses is a weak form * of access control/source identity verification. If an * SA has a source address, I only match an all-zeroes * source address, or that particular one. If the SA has * an all-zeroes source, then I match regardless. * * There is a weakness here in that a packet with all-zeroes * for an address will match regardless of the source address * stored in the packet. * * Note that port-level packet selectors, if present, * are checked in ipsec_check_ipsecin_unique(). */ if (IPSA_ARE_ADDR_EQUAL(src, retval->ipsa_srcaddr, af) || IPSA_IS_ADDR_UNSPEC(retval->ipsa_srcaddr, af) || IPSA_IS_ADDR_UNSPEC(src, af)) break; } if (retval != NULL) { /* * Just refhold the return value. The caller will then * make the appropriate calls to set the USED flag. */ IPSA_REFHOLD(retval); } return (retval); } boolean_t ipsec_outbound_sa(mblk_t *mp, uint_t proto) { mblk_t *data_mp; ipsec_out_t *io; ipaddr_t dst; uint32_t *dst_ptr, *src_ptr; isaf_t *bucket; ipsa_t *assoc; ip6_pkt_t ipp; in6_addr_t dst6; ipsa_t **sa; sadbp_t *sadbp; sadb_t *sp; sa_family_t af; data_mp = mp->b_cont; io = (ipsec_out_t *)mp->b_rptr; if (proto == IPPROTO_ESP) { sa = &io->ipsec_out_esp_sa; sadbp = &esp_sadb; } else { ASSERT(proto == IPPROTO_AH); sa = &io->ipsec_out_ah_sa; sadbp = &ah_sadb; } ASSERT(*sa == NULL); if (io->ipsec_out_v4) { ipha_t *ipha = (ipha_t *)data_mp->b_rptr; ASSERT(IPH_HDR_VERSION(ipha) == IPV4_VERSION); dst = ip_get_dst(ipha); sp = &sadbp->s_v4; af = AF_INET; /* * NOTE:Getting the outbound association is considerably * painful. ipsec_getassocbyconn() will require more * parameters as policy implementations mature. */ bucket = OUTBOUND_BUCKET_V4(sp, dst); src_ptr = (uint32_t *)&ipha->ipha_src; dst_ptr = (uint32_t *)&dst; } else { ip6_t *ip6h = (ip6_t *)data_mp->b_rptr; ASSERT(IPH_HDR_VERSION(ip6h) == IPV6_VERSION); dst6 = ip_get_dst_v6(ip6h, NULL); af = AF_INET6; bzero(&ipp, sizeof (ipp)); sp = &sadbp->s_v6; /* Same NOTE: applies here! */ bucket = OUTBOUND_BUCKET_V6(sp, dst6); src_ptr = (uint32_t *)&ip6h->ip6_src; dst_ptr = (uint32_t *)&dst6; } mutex_enter(&bucket->isaf_lock); assoc = ipsec_getassocbyconn(bucket, io, src_ptr, dst_ptr, af, proto); mutex_exit(&bucket->isaf_lock); if (assoc == NULL) return (B_FALSE); if (assoc->ipsa_state == IPSA_STATE_DEAD) { IPSA_REFRELE(assoc); return (B_FALSE); } ASSERT(assoc->ipsa_state != IPSA_STATE_LARVAL); *sa = assoc; return (B_TRUE); } /* * Inbound IPsec SA selection. */ ah_t * ipsec_inbound_ah_sa(mblk_t *mp) { mblk_t *ipsec_in; ipha_t *ipha; ipsa_t *assoc; ah_t *ah; isaf_t *hptr; ipsec_in_t *ii; boolean_t isv6; ip6_t *ip6h; int ah_offset; uint32_t *src_ptr, *dst_ptr; int pullup_len; sadb_t *sp; sa_family_t af; IP_AH_BUMP_STAT(in_requests); ASSERT(mp->b_datap->db_type == M_CTL); ipsec_in = mp; ii = (ipsec_in_t *)ipsec_in->b_rptr; mp = mp->b_cont; ASSERT(mp->b_datap->db_type == M_DATA); isv6 = !ii->ipsec_in_v4; if (isv6) { ip6h = (ip6_t *)mp->b_rptr; ah_offset = ipsec_ah_get_hdr_size_v6(mp, B_TRUE); } else { ipha = (ipha_t *)mp->b_rptr; ASSERT(ipha->ipha_protocol == IPPROTO_AH); ah_offset = ipha->ipha_version_and_hdr_length - (uint8_t)((IP_VERSION << 4)); ah_offset <<= 2; } /* * We assume that the IP header is pulled up until * the options. We need to see whether we have the * AH header in the same mblk or not. */ pullup_len = ah_offset + sizeof (ah_t); if (mp->b_rptr + pullup_len > mp->b_wptr) { if (!pullupmsg(mp, pullup_len)) { ipsec_rl_strlog(ip_mod_info.mi_idnum, 0, 0, SL_WARN | SL_ERROR, "ipsec_inbound_ah_sa: Small AH header\n"); IP_AH_BUMP_STAT(in_discards); ip_drop_packet(ipsec_in, B_TRUE, NULL, NULL, &ipdrops_ah_bad_length, &ip_dropper); return (NULL); } if (isv6) ip6h = (ip6_t *)mp->b_rptr; else ipha = (ipha_t *)mp->b_rptr; } ah = (ah_t *)(mp->b_rptr + ah_offset); if (isv6) { src_ptr = (uint32_t *)&ip6h->ip6_src; dst_ptr = (uint32_t *)&ip6h->ip6_dst; sp = &ah_sadb.s_v6; af = AF_INET6; } else { src_ptr = (uint32_t *)&ipha->ipha_src; dst_ptr = (uint32_t *)&ipha->ipha_dst; sp = &ah_sadb.s_v4; af = AF_INET; } hptr = INBOUND_BUCKET(sp, ah->ah_spi); mutex_enter(&hptr->isaf_lock); assoc = ipsec_getassocbyspi(hptr, ah->ah_spi, src_ptr, dst_ptr, af); mutex_exit(&hptr->isaf_lock); if (assoc == NULL || assoc->ipsa_state == IPSA_STATE_DEAD) { IP_AH_BUMP_STAT(lookup_failure); IP_AH_BUMP_STAT(in_discards); ipsecah_in_assocfailure(ipsec_in, 0, SL_ERROR | SL_CONSOLE | SL_WARN, "ipsec_inbound_ah_sa: No association found for " "spi 0x%x, dst addr %s\n", ah->ah_spi, dst_ptr, af); if (assoc != NULL) { IPSA_REFRELE(assoc); } return (NULL); } if (assoc->ipsa_state == IPSA_STATE_LARVAL) { /* Not fully baked; swap the packet under a rock until then */ sadb_set_lpkt(assoc, ipsec_in); IPSA_REFRELE(assoc); return (NULL); } /* * Save a reference to the association so that it can * be retrieved after execution. We free any AH SA reference * already there (innermost SA "wins". The reference to * the SA will also be used later when doing the policy checks. */ if (ii->ipsec_in_ah_sa != NULL) { IPSA_REFRELE(ii->ipsec_in_ah_sa); } ii->ipsec_in_ah_sa = assoc; return (ah); } esph_t * ipsec_inbound_esp_sa(mblk_t *ipsec_in_mp) { mblk_t *data_mp, *placeholder; uint32_t *src_ptr, *dst_ptr; ipsec_in_t *ii; ipha_t *ipha; ip6_t *ip6h; esph_t *esph; ipsa_t *ipsa; isaf_t *bucket; uint_t preamble; sa_family_t af; boolean_t isv6; sadb_t *sp; IP_ESP_BUMP_STAT(in_requests); ASSERT(ipsec_in_mp->b_datap->db_type == M_CTL); /* We have IPSEC_IN already! */ ii = (ipsec_in_t *)ipsec_in_mp->b_rptr; data_mp = ipsec_in_mp->b_cont; ASSERT(ii->ipsec_in_type == IPSEC_IN); isv6 = !ii->ipsec_in_v4; if (isv6) { ip6h = (ip6_t *)data_mp->b_rptr; } else { ipha = (ipha_t *)data_mp->b_rptr; } /* * Put all data into one mblk if it's not there already. * XXX This is probably bad long-term. Figure out better ways of doing * this. Much of the inbound path depends on all of the data being * in one mblk. * * XXX Jumbogram issues will have to be dealt with here. * If the plen is 0, we'll have to scan for a HBH header with the * actual packet length. */ if (data_mp->b_datap->db_ref > 1 || (data_mp->b_wptr - data_mp->b_rptr) < (isv6 ? (ntohs(ip6h->ip6_plen) + sizeof (ip6_t)) : ntohs(ipha->ipha_length))) { placeholder = msgpullup(data_mp, -1); if (placeholder == NULL) { IP_ESP_BUMP_STAT(in_discards); /* * TODO: Extract inbound interface from the IPSEC_IN * message's ii->ipsec_in_rill_index. */ ip_drop_packet(ipsec_in_mp, B_TRUE, NULL, NULL, &ipdrops_esp_nomem, &ip_dropper); return (NULL); } else { /* Reset packet with new pulled up mblk. */ freemsg(data_mp); data_mp = placeholder; ipsec_in_mp->b_cont = data_mp; } } /* * Find the ESP header, point the address pointers at the appropriate * IPv4/IPv6 places. */ if (isv6) { ip6h = (ip6_t *)data_mp->b_rptr; src_ptr = (uint32_t *)&ip6h->ip6_src; dst_ptr = (uint32_t *)&ip6h->ip6_dst; if (ip6h->ip6_nxt != IPPROTO_ESP) { /* There are options that need to be processed. */ preamble = ip_hdr_length_v6(data_mp, ip6h); } else { preamble = sizeof (ip6_t); } sp = &esp_sadb.s_v6; af = AF_INET6; } else { ipha = (ipha_t *)data_mp->b_rptr; src_ptr = (uint32_t *)&ipha->ipha_src; dst_ptr = (uint32_t *)&ipha->ipha_dst; preamble = IPH_HDR_LENGTH(ipha); sp = &esp_sadb.s_v4; af = AF_INET; } esph = (esph_t *)(data_mp->b_rptr + preamble); /* Since hash is common on inbound (SPI value), hash here. */ bucket = INBOUND_BUCKET(sp, esph->esph_spi); mutex_enter(&bucket->isaf_lock); ipsa = ipsec_getassocbyspi(bucket, esph->esph_spi, src_ptr, dst_ptr, af); mutex_exit(&bucket->isaf_lock); if (ipsa == NULL || ipsa->ipsa_state == IPSA_STATE_DEAD) { /* This is a loggable error! AUDIT ME! */ IP_ESP_BUMP_STAT(lookup_failure); IP_ESP_BUMP_STAT(in_discards); ipsecesp_in_assocfailure(ipsec_in_mp, 0, SL_ERROR | SL_CONSOLE | SL_WARN, "ipsec_inbound_esp_sa: No association found for " "spi 0x%x, dst addr %s\n", esph->esph_spi, dst_ptr, af); if (ipsa != NULL) { IPSA_REFRELE(ipsa); } return (NULL); } if (ipsa->ipsa_state == IPSA_STATE_LARVAL) { /* Not fully baked; swap the packet under a rock until then */ sadb_set_lpkt(ipsa, ipsec_in_mp); IPSA_REFRELE(ipsa); return (NULL); } /* * Save a reference to the association so that it can * be retrieved after execution. We free any AH SA reference * already there (innermost SA "wins". The reference to * the SA will also be used later when doing the policy checks. */ if (ii->ipsec_in_esp_sa != NULL) { IPSA_REFRELE(ii->ipsec_in_esp_sa); } ii->ipsec_in_esp_sa = ipsa; return (esph); }