.\" ident "%Z%%M% %I% %E% SMI" .\" Copyright 2008 Sun Microsystems, Inc. All rights reserved. .\" Use is subject to license terms. .\" .\" CDDL HEADER START .\" .\" The contents of this file are subject to the terms of the .\" Common Development and Distribution License (the "License"). .\" You may not use this file except in compliance with the License. .\" .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE .\" or http://www.opensolaris.org/os/licensing. .\" See the License for the specific language governing permissions .\" and limitations under the License. .\" .\" When distributing Covered Code, include this CDDL HEADER in each .\" file and include the License file at usr/src/OPENSOLARIS.LICENSE. .\" If applicable, add the following below this CDDL HEADER, with the .\" fields enclosed by brackets "[]" replaced with your own identifying .\" information: Portions Copyright [yyyy] [name of copyright owner] .\" .\" CDDL HEADER END .\" .TH check_rtime 1 "21 April 2008" .SH NAME .I check_rtime \- check ELF runtime attributes .SH SYNOPSIS \fBcheck_rtime [-a] [-d depdir] [-i] [-m] [-o] [-s] file | dir, ...\fP .LP .SH DESCRIPTION .IX "OS-Net build tools" "check_rtime" "" "\fBcheck_rtime\fP" .LP .I check_rtime attempts to check a number of ELF runtime attributes for consistency with common build rules. These checks involve running \fBldd(1)\fP and \fBelfdump(1)\fP against a family of dynamic objects. A dynamic object can be defined explicitly as a \fIfile\fP or multiple dynamic objects can be located under the directory \fIdir\fP. .LP .I check_rtime is typically called from \fBnightly(1)\fP when the \fB-r\fP option is in effect. In this case the dynamic objects under the associated \fIproto\fP area (\fB$ROOT\fP) are checked. .I check_rtime can also be run standalone against any set of dynamic objects. .LP .I check_rtime uses \fBldd(1)\fP to verify dependencies. This implies that by default any object inspected will bind to its dependencies as they are found in the \fBunderlying\fP system. Use of the \fB-d\fP option, or the existence of the environment variables \fB$CODEMGR_WS/$ROOT\fP instruct .I check_rtime to establish an alternative dependency mapping using runtime configuration files generated with \fBcrle(1)\fP. .LP .I check_rtime uses \fBldd(1)\fP to completely relocate any dynamic object and thus detect missing dependencies, unsatisfied symbol relocations, unused and unreferenced dependencies. These checks are carried out for the following reasons: .TP 4 \(bu An object that cannot find its dependencies may fail to load at runtime. This error condition often goes unnoticed because the existing use of the object is as a dependency itself, and the objects' dependencies are already satisfied by the caller. However, if the object itself is unable to satisfy its dependencies its use in new environments may be compromised. .sp A missing or erroneous \fBrunpath\fP is the typical reason why an object can not locate its dependencies. Use of the link-editors \fB-zdefs\fP option when building a shared object ensures required dependencies are established. This flag is inherited from \fB$(DYNFLAGS)\fP in \fIlib/Makefile.lib\fP. Missing dependencies are displayed as: .sp .RS 6 foo: bar.so.1 => (file not found) .RE .TP \(bu Unsatisfied symbol relocations indicate that some thread of execution through the object will fail when it is unable to locate a referenced symbol. .sp A missing, or mismatched version of a dependency is the typical reason for unsatisfied symbol relocations (see missing dependency discussion above). Unsatisfied symbol relocations are displayed as: .sp .RS 6 foo: symbol not found: bar .RE .RS 4 .sp Note: Shared objects can make reference to symbol definitions that are expected to be defined by the caller. To indicate that such symbols are not undefined in the usual sense, you must specify these symbols in a \fImapfile\fP, using the \fBEXTERN\fP or \fBPARENT\fP symbol attribute. Without these symbol attributes, \fBldd(1)\fP is unable to determine the symbols special nature, and .I check_rtime will report these symbols as undefined. .RE .TP \(bu Unused dependencies are wasteful at runtime, as they take time to load and relocate, but will not be used by the calling object. They also result in unnecessary processing at link-edit time. .sp Dependency lists (typically defined via \fB$(LDLIBS)\fP) that have been yanked-and-put between \fIMakefiles\fP without verifying their need, is a typical reason why unused dependencies exist. Unused dependencies are displayed as: .sp .RS 6 foo: unused object=bar.so.1 .RE .TP \(bu Unreferenced dependencies are also wasteful at runtime, although not to the extent of unused dependencies. They also result in unnecessary processing at link-edit time. .sp Unreferenced dependency removal guards against a dependency becoming unused when combined with different objects, or as the other object dependencies evolve. Unreferenced dependencies are displayed as: .sp .RS 6 foo: unreferenced object=bar.so.1; \\ .br unused dependency of libfoo.so.1 \\ .br .RE .RS 4 .sp See also the section ENVIRONMENT VARIABLES. .RE .TP \(bu Unused search paths are wasteful at runtime. Unused search paths are displayed as: .sp .RS 6 foo: unused search path=/usr/foo/lib \\ .br (RUNPATH/RPATH from file libfoo.so.1) \\ .br .RE .LP .I check_rtime uses \fBelfdump(1)\fP to look for a concatenated relocation section in shared objects, the existence of text relocations, whether debugging or symbol table information exists, whether applications have a non-executable stack defined, duplicate entries in the symbol sorting sections, and for direct bindings. These checks are carried out for the following reasons: .TP 4 \(bu A concatenated relocation section (\fI.SUNW_reloc\fP) provides optimal symbol table access as runtime, and thus reduces the overhead of relocating the shared object. In past releases, the link-edit of a dynamic object with the \fB-z combreloc\fP option was required to generate a combined relocation section. However, with the integration of 6642769, this section combination is a default behavior of the link-editor. .sp In past releases, not inheriting \fB$(DYNFLAGS)\fP from \fIlib/Makefile.lib\fP was the typical reason for not having a concatenated relocation section. The misguided use of the \fB-z nocombreloc\fP option will also prevent the creation of a concatenated relocation section. A missing concatenated relocation section is displayed as: .sp .RS 6 foo: SUNW_reloc section missing .RE .TP \(bu Text relocations result in impure text segments. As text segments are typically read-only, they can be shared between numerous processes. If they must be updated as part of the relocation then the updated pages become unshareable and swap space must be allocated to back these pages. These events consume unnecessary system resources and reduce overall system performance. .sp Not inheriting the \fB$(PICS)\fP rules from \fIlib/Makefile.lib\fP is the typical reason for having non-pic code in shared objects. Text relocations are displayed as: .sp .RS 6 foo: TEXTREL .dynamic tag .RE .TP \(bu Debugging information is unnecessary in released objects. Although extensive when compiled \fB-g\fP, small quantities of debugging information are stored in \fI.stabs\fP sections under normal compilations. This debugging information is geared towards aiding debuggers locate relocatable objects associated with the dynamic objects being debugged. As relocatable objects aren't made available as part of a software release this information has no use. .sp Not inheriting the correct \fB$(LDFLAGS)\fP from \fIcmd/Makefile.cmd\fP (which asserts \fP-s\fP), or \fB$(POST_PROCESS_SO)\fP (which asserts \fIstrip -x\fP) are typical reasons for not removing debugging information. Note, removal of debugging information is only enabled for release builds. The existence of debugging information is displayed as: .sp .RS 6 foo: debugging sections should be deleted \\ .br .RE .TP \(bu All objects should retain their full \fI.symtab\fP symbol table. Although this consumes disk space, it provides for more extensive stack tracing when debugging user applications. .sp Hard coding a \fI-s\fP flag with \fB$(LDFLAGS)\fP or \fB$(DYNFLAGS)\fP is the typical reason for symbol tables being removed. Objects that do not contain a symbol table are displayed as: .sp .RS 6 foo.so.1: symbol table should not be stripped \\ .br .RE .TP \(bu Applications should have a non-executable stack defined to make them less vulnerable to buffer overflow attacks. .sp Not inheriting the \fB$(LDFLAGS)\fP macro in \fIcmd/Makefile.cmd\fP is the typical reason for not having a non-executable stack definition. Applications without this definition are displayed as: .sp .RS 6 foo: application requires non-executable stack \\ .br .RE .sp .TP \(bu X86 applications should have a non-executable data segment defined to make them less vulnerable to buffer overflow attacks. .sp Not inheriting the \fB$(LDFLAGS)\fP macro in \fIcmd/Makefile.cmd\fP is the typical reason for not having a non-executable data definition. Applications without this definition are displayed as: .sp .RS 6 foo: application requires non-executable data \\ .br .RE .sp .TP \(bu Solaris ELF files contain symbol sort sections used by DTrace to map addresses in memory to the related function or variable symbols. There are two such sections, \fI.SUNW_dynsymsort\fP for regular symbols, and \fI.SUNW_dyntlssort\fP for thread local symbols. To ensure that the best names are shown for each such address, and that the same name is given across Solaris releases, .I check_rtime enforces the rule that only one symbol can appear in the sort sections for any given address. There are two common ways in which multiple symbols or a given address occur in the ON distribution. The first is from code written in assembly language. The second is as a result of using \fB#pragma weak\fP in C to create weak symbols. The best solution to this situation is to modify the code to avoid symbol aliasing. Alternatively, the \fBNODYNSORT\fP mapfile attribute can be used to eliminate the unwanted symbol. .sp Duplicate entries in a symbol sort section are displayed in one of the following ways, depending on whether the section is for regular, or thread local symbols: .sp .RS 6 foo: .SUNW_dynsymsort: duplicate ADDRESS: sym1, sym2 .br foo: .SUNW_dyntlssort: duplicate OFFSET: sym1, sym2 .RE .sp .TP \(bu \fBOSNet\fP dynamic ELF objects are expected to employ direct bindings whenever feasible. This runtime binding technique helps to avoid accidental interposition problems, and provides a more optimal runtime symbol search model. .sp Not inheriting the correct \fB$(LDFLAGS)\fP from \fIcmd/Makefile.cmd\fP, or the correct \fB$(DYNFLAGS)\fP from \fIlib/Makefile.lib\fP, are the typical reasons for not enabling direct bindings. Dynamic objects that do not contain direct binding information are displayed as: .sp .RS 6 foo: object has no direct bindings \\ .br .RE .sp .LP .I check_rtime also uses \fBelfdump(1)\fP to display useful dynamic entry information under the \fB-i\fP option. This doesn't necessarily indicate an error condition, but provides information that is often useful for gatekeepers to track changes in a release. Presently the information listed is: .TP \(bu Runpaths are printed for any dynamic object. This is a historic sanity check to insure compiler supplied runpaths (typically from \fBCC\fP) are not recorded in any objects. Runpaths are displayed as: .sp .RS 6 foo: RPATH=/usr/bar/lib .RE .TP \(bu Needed dependencies are printed for any dynamic object. In the freeware world this often helps the introducer of a new shared object discover that an existing binary has become its consumer, and thus that binaries package dependencies may require updating. Dependencies are printed as: .sp .RS 6 foo: NEEDED=bar.so.1 .RE .sp .LP .I check_rtime uses \fBmcs(1)\fP to inspect an objects \fI.comment\fP section. During development, this section contains numerous file identifiers marked with the tag "\fB@(#)\fP". For release builds these sections are deleted and rewritten under control of the \fB$(POST_PROCESS)\fP macro to produce a common release identifier. This identifier typically consists of three lines including a single comment starting with the string "\fB@(#) SunOS\fP". If this common identifier isn't found the following diagnostic is generated: .sp .RS 6 foo: non-conforming mcs(1) comment .RE .sp .LP .SH OPTIONS .LP The following options are supported: .TP 4 .B \-a Process all dynamic objects found. As with all attempts to follow standard build rules, there are always exceptions. As .I check_rtime was primarily designed to process a nightly builds \fB$ROOT\fP hierarchy, and there exist numerous \fBOSNet\fP components that fail its tests, .I check_rtime maintains a list of directories and files (as they exist in a \fB$ROOT\fP directory hierarchy) that will be skipped during its processing. Use of \fB-a\fP prevents this component skipping. .sp In addition there are a couple of optimizations within .I check_rtime directory traversal that improve the scripts performance. Use of \fB-a\fP ignores these optimizations. .TP .B \-d depdir Use \fIdepdir\fP to generate an alternative dependency mapping. .TP .B \-i Provide dynamic entry information. Presently only dependencies and runpaths are printed. .sp \fBNote\fP, any references to \fIlibintl.so.1\fP or \fIlibw.so.1\fP are flagged as being unnecessary as all the interfaces provided by these shared objects were folded into \fIlibc\fP in Solaris 5.6. .TP .B \-m Enable \fBmcs(1)\fP checking. .TP .B \-o Produce a one-line output for each condition discovered, prefixed by the objects name. This output style is more terse, but is more appropriate for sorting and diffing with previous build results. .TP .B \-s Determine whether \fI.stabs\fP sections exist. .LP .SH ALTERNATIVE DEPENDENCY MAPPING As .I check_rtime was primarily designed to process a nightly builds \fB$ROOT\fP hierarchy, it is often the case that objects within this hierarchy must bind to dependencies within the same hierarchy to satisfy their requirements. .LP To achieve this, .I check_rtime uses the directory specified with the \fB-d\fP option, or the existence of the environment variables \fB$CODEMGR_WS\fP and \fB$ROOT\fP to generate a list of available shared objects. This list is used to create runtime configuration files via \fBcrle(1)\fP, that establish the new shared objects as alternatives to their underlying system location. .I check_rtime passes these configuration files as \fBLD_CONFIG\fP environment variable settings to \fBldd(1)\fP using its \fB-e\fP option. .LP The effect of these configuration files is that the execution of an object under \fBldd(1)\fP will bind to the dependencies defined as alternatives. Simply put, an object inspected in the \fIproto\fP area will bind to its dependencies found in the \fIproto\fP area. Dependencies that have no alternative mapping will continue to bind to the underlying system. .LP .SH ENVIRONMENT VARIABLES .LP When the \fB-d\fP option isn't in use .I check_rtime uses the following environment variables to establish an alternative dependency mapping: .LP .B CODEMGR_WS .RS 4 The root of your Teamware workspace, which is the directory containing \fICodemgr_wsdata\fP. Existence of this environment variable indicates that \fB$ROOT\fP should be investigated. .RE .LP .B ROOT .RS 4 Root of the \fIproto\fP area of your Teamware workspace. Any shared objects under this directory will be used to establish an alternative dependency mapping. .RE .sp If \fBldd(1)\fP supports the \fB-U\fP option it will be used to determine any unreferenced dependencies. Otherwise \fBldd(1)\fP uses the older \fB-u\fP option which only detects unused references. If the following environment variable exists, and indicates an earlier release than \fB5.10\fP then \fBldd(1)\fP also falls back to using the \fB-u\fP option. .RE .LP .B RELEASE .RS 4 The release version number of the environment being built. .RE .SH ERROR CONDITIONS .LP Use of an alternative dependency mapping requires \fBldd(1) -e\fP. This option is relatively new (see 4390308 integrated in s81_30), thus .I check_rtime validates \fBldd(1)\fP before attempting to create an alternative dependency mapping. An older version of \fBldd(1)\fP will be caught as: .sp .RS 4 ldd: does not support -e, .... .RE .LP Inspection of an object with \fBldd(1)\fP assumes it is compatible with the machine on which .I check_rtime is being run. Incompatible objects such as a 64-bit object encountered on a 32-bit system, or an i386 object encountered on a sparc system, can not be fully inspected. These objects are displayed as: .sp .RS 4 foo: has wrong class or data encoding .RE .LP .SH SEE ALSO .B crle(1), .B elfdump(1), .B ldd(1), .B ld.so.1(1), .B mcs(1).