/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * Wrapper for the GNU assembler to make it accept the Sun assembler * arguments where possible. * * There are several limitations; the Sun assembler takes multiple * source files, we only take one. * * -b, -s, -xF, -T plain not supported. * -S isn't supported either, because while GNU as does generate * listings with -a, there's no obvious mapping between sub-options. * -K pic, -K PIC not supported either, though it's not clear what * these actually do .. * -Qy (not supported) adds a string to the .comment section * describing the assembler version, while * -Qn (supported) suppresses the string (also the default). * * We also add '-#' support to see invocation lines.. * We also add '-xarch=amd64' in case we need to feed the assembler * something different (or in case we need to invoke a different binary * altogether!) */ #include #include #include #include #include #include #include static const char *progname; static int verbose; struct aelist { int ael_argc; struct ae { struct ae *ae_next; char *ae_arg; } *ael_head, *ael_tail; }; static struct aelist * newael(void) { return (calloc(sizeof (struct aelist), 1)); } static void newae(struct aelist *ael, const char *arg) { struct ae *ae; ae = calloc(sizeof (*ae), 1); ae->ae_arg = strdup(arg); if (ael->ael_tail == NULL) ael->ael_head = ae; else ael->ael_tail->ae_next = ae; ael->ael_tail = ae; ael->ael_argc++; } static void fixae_arg(struct ae *ae, const char *newarg) { free(ae->ae_arg); ae->ae_arg = strdup(newarg); } static char ** aeltoargv(struct aelist *ael) { struct ae *ae; char **argv; int argc; argv = calloc(sizeof (*argv), ael->ael_argc + 1); for (argc = 0, ae = ael->ael_head; ae; ae = ae->ae_next, argc++) { argv[argc] = ae->ae_arg; if (ae == ael->ael_tail) break; } return (argv); } static int error(const char *arg) { (void) fprintf(stderr, "%s: as->gas mapping failed at or near arg '%s'\n", progname, arg); return (2); } static int usage(const char *arg) { if (arg != NULL) (void) fprintf(stderr, "error: %s\n", arg); (void) fprintf(stderr, "Usage: %s [-V] [-#]\n" "\t[-xarch=architecture]\n" "\t[-o objfile] [-L]\n" "\t[-P [[-Ipath] [-Dname] [-Dname=def] [-Uname]]...]\n" "\t[-m] [-n] file.s ...\n", progname); return (3); } static void copyuntil(FILE *in, FILE *out, int termchar) { int c; while ((c = fgetc(in)) != EOF) { if (out && fputc(c, out) == EOF) exit(1); if (c == termchar) break; } } /* * Variant of copyuntil(), used for copying the path used * for .file directives. This version removes the workspace * from the head of the path, or failing that, attempts to remove * /usr/include. This is a workaround for the way gas handles * these directives. The objects produced by gas contain STT_FILE * symbols for every .file directive. These FILE symbols contain our * workspace paths, leading to wsdiff incorrectly flagging them as * having changed. By clipping off the workspace from these paths, * we eliminate these false positives. */ static void copyuntil_path(FILE *in, FILE *out, int termchar, const char *wspace, size_t wspace_len) { #define PROTO_INC "/proto/root_i386/usr/include/" #define SYS_INC "/usr/include/" static const size_t proto_inc_len = sizeof (PROTO_INC) - 1; static const size_t sys_inc_len = sizeof (SYS_INC) - 1; /* * Dynamically sized buffer for reading paths. Retained * and reused between calls. */ static char *buf = NULL; static size_t bufsize = 0; size_t bufcnt = 0; char *bufptr; int c; /* Read the path into the buffer */ while ((c = fgetc(in)) != EOF) { /* * If we need a buffer, or need a larger buffer, * fix that here. */ if (bufcnt >= bufsize) { bufsize = (bufsize == 0) ? MAXPATHLEN : (bufsize * 2); buf = realloc(buf, bufsize + 1); /* + room for NULL */ if (buf == NULL) { perror("realloc"); exit(1); } } buf[bufcnt++] = c; if (c == termchar) break; } if (bufcnt == 0) return; /* * We have a non-empty buffer, and thus the opportunity * to do some surgery on it before passing it to the output. */ buf[bufcnt] = '\0'; bufptr = buf; /* * If our workspace is at the start, remove it. * If not, then look for the system /usr/include instead. */ if ((wspace_len > 0) && (wspace_len < bufcnt) && (strncmp(bufptr, wspace, wspace_len) == 0)) { bufptr += wspace_len; bufcnt -= wspace_len; /* * Further opportunity: Also clip the prefix * that leads to /usr/include in the proto. */ if ((proto_inc_len < bufcnt) && (strncmp(bufptr, PROTO_INC, proto_inc_len) == 0)) { bufptr += proto_inc_len; bufcnt -= proto_inc_len; } } else if ((sys_inc_len < bufcnt) && (strncmp(bufptr, SYS_INC, sys_inc_len) == 0)) { bufptr += sys_inc_len; bufcnt -= sys_inc_len; } /* Output whatever is left */ if (out && (fwrite(bufptr, 1, bufcnt, out) != bufcnt)) { perror("fwrite"); exit(1); } #undef PROTO_INC #undef SYS_INC } /* * The idea here is to take directives like this emitted * by cpp: * * # num * * and convert them to directives like this that are * understood by the GNU assembler: * * .line num * * and similarly: * * # num "string" optional stuff * * is converted to * * .line num * .file "string" * * While this could be done with a sequence of sed * commands, this is simpler and faster.. */ static pid_t filter(int pipein, int pipeout) { pid_t pid; FILE *in, *out; char *wspace; size_t wspace_len; if (verbose) (void) fprintf(stderr, "{#line filter} "); switch (pid = fork()) { case 0: if (dup2(pipein, 0) == -1 || dup2(pipeout, 1) == -1) { perror("dup2"); exit(1); } closefrom(3); break; case -1: perror("fork"); default: return (pid); } in = fdopen(0, "r"); out = fdopen(1, "w"); /* * Key off the CODEMGR_WS environment variable to detect * if we're in an activated workspace, and to get the * path to the workspace. */ wspace = getenv("CODEMGR_WS"); if (wspace != NULL) wspace_len = strlen(wspace); while (!feof(in)) { int c, num; switch (c = fgetc(in)) { case '#': switch (fscanf(in, " %d", &num)) { case 0: /* * discard comment lines completely * discard ident strings completely too. * (GNU as politely ignores them..) */ copyuntil(in, NULL, '\n'); break; default: (void) fprintf(stderr, "fscanf botch?"); /*FALLTHROUGH*/ case EOF: exit(1); /*NOTREACHED*/ case 1: /* * This line has a number at the beginning; * if it has a string after the number, then * it's a filename. * * If this is an activated workspace, use * copyuntil_path() to do path rewriting * that will prevent workspace paths from * being burned into the resulting object. * If not in an activated workspace, then * copy the existing path straight through * without interpretation. */ if (fgetc(in) == ' ' && fgetc(in) == '"') { (void) fprintf(out, "\t.file \""); if (wspace != NULL) copyuntil_path(in, out, '"', wspace, wspace_len); else copyuntil(in, out, '"'); (void) fputc('\n', out); } (void) fprintf(out, "\t.line %d\n", num - 1); /* * discard the rest of the line */ copyuntil(in, NULL, '\n'); break; } break; case '\n': /* * preserve newlines */ (void) fputc(c, out); break; case EOF: /* * don't write EOF! */ break; default: /* * lines that don't begin with '#' are copied */ (void) fputc(c, out); copyuntil(in, out, '\n'); break; } if (ferror(out)) exit(1); } exit(0); /*NOTREACHED*/ } static pid_t invoke(char **argv, int pipein, int pipeout) { pid_t pid; if (verbose) { char **dargv = argv; while (*dargv) (void) fprintf(stderr, "%s ", *dargv++); } switch (pid = fork()) { case 0: if (pipein >= 0 && dup2(pipein, 0) == -1) { perror("dup2"); exit(1); } if (pipeout >= 0 && dup2(pipeout, 1) == -1) { perror("dup2"); exit(1); } closefrom(3); (void) execvp(argv[0], argv); perror("execvp"); (void) fprintf(stderr, "%s: couldn't run %s\n", progname, argv[0]); break; case -1: perror("fork"); default: return (pid); } exit(2); /*NOTREACHED*/ } static int pipeline(char **ppargv, char **asargv) { int pipedes[4]; int active = 0; int rval = 0; pid_t pid_pp, pid_f, pid_as; if (pipe(pipedes) == -1 || pipe(pipedes + 2) == -1) { perror("pipe"); return (4); } if ((pid_pp = invoke(ppargv, -1, pipedes[0])) > 0) active++; if (verbose) (void) fprintf(stderr, "| "); if ((pid_f = filter(pipedes[1], pipedes[2])) > 0) active++; if (verbose) (void) fprintf(stderr, "| "); if ((pid_as = invoke(asargv, pipedes[3], -1)) > 0) active++; if (verbose) { (void) fprintf(stderr, "\n"); (void) fflush(stderr); } closefrom(3); if (active != 3) return (5); while (active != 0) { pid_t pid; int stat; if ((pid = wait(&stat)) == -1) { rval++; break; } if (!WIFEXITED(stat)) continue; if (pid == pid_pp || pid == pid_f || pid == pid_as) { active--; if (WEXITSTATUS(stat) != 0) rval++; } } return (rval); } int main(int argc, char *argv[]) { struct aelist *cpp = NULL; struct aelist *m4 = NULL; struct aelist *as = newael(); char **asargv; char *outfile = NULL; char *srcfile = NULL; const char *as_dir, *as64_dir, *m4_dir, *m4_lib_dir, *cpp_dir; char *as_pgm, *as64_pgm, *m4_pgm, *m4_cmdefs, *cpp_pgm; size_t bufsize; int as64 = 0; int code; if ((progname = strrchr(argv[0], '/')) == NULL) progname = argv[0]; else progname++; /* * Helpful when debugging, or when changing tool versions.. */ if ((as_dir = getenv("AW_AS_DIR")) == NULL) as_dir = DEFAULT_AS_DIR; /* /usr/sfw/bin */ bufsize = strlen(as_dir) + strlen("/gas") + 1; as_pgm = malloc(bufsize); (void) snprintf(as_pgm, bufsize, "%s/gas", as_dir); if ((as64_dir = getenv("AW_AS64_DIR")) == NULL) as64_dir = DEFAULT_AS64_DIR; /* /usr/sfw/bin */ bufsize = strlen(as64_dir) + strlen("/gas") + 1; as64_pgm = malloc(bufsize); (void) snprintf(as64_pgm, bufsize, "%s/gas", as64_dir); if ((m4_dir = getenv("AW_M4_DIR")) == NULL) m4_dir = DEFAULT_M4_DIR; /* /usr/ccs/bin */ bufsize = strlen(m4_dir) + strlen("/m4") + 1; m4_pgm = malloc(bufsize); (void) snprintf(m4_pgm, bufsize, "%s/m4", m4_dir); if ((m4_lib_dir = getenv("AW_M4LIB_DIR")) == NULL) m4_lib_dir = DEFAULT_M4LIB_DIR; /* /usr/ccs/lib */ bufsize = strlen(m4_lib_dir) + strlen("/cmdefs") + 1; m4_cmdefs = malloc(bufsize); (void) snprintf(m4_cmdefs, bufsize, "%s/cmdefs", m4_lib_dir); if ((cpp_dir = getenv("AW_CPP_DIR")) == NULL) cpp_dir = DEFAULT_CPP_DIR; /* /usr/ccs/lib */ bufsize = strlen(cpp_dir) + strlen("/cpp") + 1; cpp_pgm = malloc(bufsize); (void) snprintf(cpp_pgm, bufsize, "%s/cpp", cpp_dir); newae(as, as_pgm); newae(as, "--warn"); newae(as, "--fatal-warnings"); newae(as, "--traditional-format"); /* * This is a support hack to rewrite code for the compiler * which should probably cause an assembler programmer to recode * - so, generate a warning in this case. */ newae(as, "-K"); /* * Walk the argument list, translating as we go .. */ while (--argc > 0) { char *arg; int arglen; arg = *++argv; arglen = strlen(arg); if (*arg != '-') { char *filename; /* * filenames ending in '.s' are taken to be * assembler files, and provide the default * basename of the output file. * * other files are passed through to the * preprocessor, if present, or to gas if not. */ filename = arg; if (arglen > 2 && strcmp(arg + arglen - 2, ".s") == 0) { /* * Though 'as' allows multiple assembler * files to be processed in one invocation * of the assembler, ON only processes one * file at a time, which makes things a lot * simpler! */ if (srcfile == NULL) srcfile = arg; else return (usage( "one assembler file at a time")); /* * If we haven't seen a -o option yet, * default the output to the basename * of the input, substituting a .o on the end */ if (outfile == NULL) { char *argcopy; argcopy = strdup(arg); argcopy[arglen - 1] = 'o'; if ((outfile = strrchr( argcopy, '/')) == NULL) outfile = argcopy; else outfile++; } } if (cpp) newae(cpp, filename); else if (m4) newae(m4, filename); else newae(as, filename); continue; } else arglen--; switch (arg[1]) { case 'K': /* * -K pic * -K PIC */ if (arglen == 1) { if ((arg = *++argv) == NULL || *arg == '\0') return (usage("malformed -K")); argc--; } else { arg += 2; } if (strcmp(arg, "PIC") != 0 && strcmp(arg, "pic") != 0) return (usage("malformed -K")); break; /* just ignore -Kpic for gcc */ case 'Q': if (strcmp(arg, "-Qn") == 0) break; /*FALLTHROUGH*/ case 'b': case 's': case 'T': /* * -b Extra symbol table for source browser .. * not relevant to gas, thus should error. * -s Put stabs in .stabs section not stabs.excl * not clear if there's an equivalent * -T 4.x migration option */ default: return (error(arg)); case 'x': /* * Accept -xarch special case to invoke alternate * assemblers or assembler flags for different * architectures. */ if (strcmp(arg, "-xarch=amd64") == 0 || strcmp(arg, "-xarch=generic64") == 0) { as64++; fixae_arg(as->ael_head, as64_pgm); break; } /* * XX64: Is this useful to gas? */ if (strcmp(arg, "-xmodel=kernel") == 0) break; /* * -xF Generates performance analysis data * no equivalent */ return (error(arg)); case 'V': newae(as, arg); break; case '#': verbose++; break; case 'L': newae(as, "--keep-locals"); break; case 'n': newae(as, "--no-warn"); break; case 'o': if (arglen != 1) return (usage("bad -o flag")); if ((arg = *++argv) == NULL || *arg == '\0') return (usage("bad -o flag")); outfile = arg; argc--; arglen = strlen(arg + 1); break; case 'm': if (cpp) return (usage("-m conflicts with -P")); if (m4 == NULL) { m4 = newael(); newae(m4, m4_pgm); newae(m4, m4_cmdefs); } break; case 'P': if (m4) return (usage("-P conflicts with -m")); if (cpp == NULL) { cpp = newael(); newae(cpp, cpp_pgm); newae(cpp, "-D__GNUC_AS__"); } break; case 'D': case 'U': if (cpp) newae(cpp, arg); else if (m4) newae(m4, arg); else newae(as, arg); break; case 'I': if (cpp) newae(cpp, arg); else newae(as, arg); break; case '-': /* a gas-specific option */ newae(as, arg); break; } } #if defined(__i386) if (as64) newae(as, "--64"); else newae(as, "--32"); #endif if (srcfile == NULL) return (usage("no source file(s) specified")); if (outfile == NULL) outfile = "a.out"; newae(as, "-o"); newae(as, outfile); asargv = aeltoargv(as); if (cpp) { #if defined(__sparc) newae(cpp, "-Dsparc"); newae(cpp, "-D__sparc"); if (as64) newae(cpp, "-D__sparcv9"); else newae(cpp, "-D__sparcv8"); #elif defined(__i386) || defined(__x86) if (as64) { newae(cpp, "-D__x86_64"); newae(cpp, "-D__amd64"); } else { newae(cpp, "-Di386"); newae(cpp, "-D__i386"); } #else #error "need isa-dependent defines" #endif code = pipeline(aeltoargv(cpp), asargv); } else if (m4) code = pipeline(aeltoargv(m4), asargv); else { /* * XXX should arrange to fork/exec so that we * can unlink the output file if errors are * detected.. */ (void) execvp(asargv[0], asargv); perror("execvp"); (void) fprintf(stderr, "%s: couldn't run %s\n", progname, asargv[0]); code = 7; } if (code != 0) (void) unlink(outfile); return (code); }