'\" te .\" Copyright (c) 2004, 2009 Sun Microsystems, Inc. All Rights Reserved. .\" Copyright 2013 Joyent, Inc. All Rights Reserved. .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. .\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the .\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] .TH ZONECFG 1M "Feb 28, 2014" .SH NAME zonecfg \- set up zone configuration .SH SYNOPSIS .LP .nf \fBzonecfg\fR \fB-z\fR \fIzonename\fR .fi .LP .nf \fBzonecfg\fR \fB-z\fR \fIzonename\fR \fIsubcommand\fR .fi .LP .nf \fBzonecfg\fR \fB-z\fR \fIzonename\fR \fB-f\fR \fIcommand_file\fR .fi .LP .nf \fBzonecfg\fR help .fi .SH DESCRIPTION .sp .LP The \fBzonecfg\fR utility creates and modifies the configuration of a zone. Zone configuration consists of a number of resources and properties. .sp .LP To simplify the user interface, \fBzonecfg\fR uses the concept of a scope. The default scope is global. .sp .LP The following synopsis of the \fBzonecfg\fR command is for interactive usage: .sp .in +2 .nf zonecfg \fB-z\fR \fIzonename subcommand\fR .fi .in -2 .sp .sp .LP Parameters changed through \fBzonecfg\fR do not affect a running zone. The zone must be rebooted for the changes to take effect. .sp .LP In addition to creating and modifying a zone, the \fBzonecfg\fR utility can also be used to persistently specify the resource management settings for the global zone. .sp .LP In the following text, "rctl" is used as an abbreviation for "resource control". See \fBresource_controls\fR(5). .sp .LP Every zone is configured with an associated brand. The brand determines the user-level environment used within the zone, as well as various behaviors for the zone when it is installed, boots, or is shutdown. Once a zone has been installed the brand cannot be changed. The default brand is determined by the installed distribution in the global zone. Some brands do not support all of the \fBzonecfg\fR properties and resources. See the brand-specific man page for more details on each brand. For an overview of brands, see the \fBbrands\fR(5) man page. .SS "Resources" .sp .LP The following resource types are supported: .sp .ne 2 .na \fB\fBattr\fR\fR .ad .sp .6 .RS 4n Generic attribute. .RE .sp .ne 2 .na \fB\fBcapped-cpu\fR\fR .ad .sp .6 .RS 4n Limits for CPU usage. .RE .sp .ne 2 .na \fB\fBcapped-memory\fR\fR .ad .sp .6 .RS 4n Limits for physical, swap, and locked memory. .RE .sp .ne 2 .na \fB\fBdataset\fR\fR .ad .sp .6 .RS 4n \fBZFS\fR dataset. .RE .sp .ne 2 .na \fB\fBdedicated-cpu\fR\fR .ad .sp .6 .RS 4n Subset of the system's processors dedicated to this zone while it is running. .RE .sp .ne 2 .na \fB\fBdevice\fR\fR .ad .sp .6 .RS 4n Device. .RE .sp .ne 2 .na \fB\fBfs\fR\fR .ad .sp .6 .RS 4n file-system .RE .sp .ne 2 .na \fB\fBnet\fR\fR .ad .sp .6 .RS 4n Network interface. .RE .sp .ne 2 .na \fB\fBrctl\fR\fR .ad .sp .6 .RS 4n Resource control. .RE .SS "Properties" .sp .LP Each resource type has one or more properties. There are also some global properties, that is, properties of the configuration as a whole, rather than of some particular resource. .sp .LP The following properties are supported: .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBzonename\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBzonepath\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBautoboot\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBbootargs\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBpool\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBlimitpriv\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBbrand\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBcpu-shares\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBhostid\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBmax-lwps\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBmax-msg-ids\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBmax-sem-ids\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBmax-shm-ids\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBmax-shm-memory\fR .RE .sp .ne 2 .na \fB(global)\fR .ad .sp .6 .RS 4n \fBscheduling-class\fR .RE .sp .ne 2 .na .B (global) .ad .sp .6 .RS 4n .B fs-allowed .RE .sp .ne 2 .na \fB\fBfs\fR\fR .ad .sp .6 .RS 4n \fBdir\fR, \fBspecial\fR, \fBraw\fR, \fBtype\fR, \fBoptions\fR .RE .sp .ne 2 .na \fB\fBnet\fR\fR .ad .sp .6 .RS 4n \fBaddress\fR, \fBphysical\fR, \fBdefrouter\fR .RE .sp .ne 2 .na \fB\fBdevice\fR\fR .ad .sp .6 .RS 4n \fBmatch\fR .RE .sp .ne 2 .na \fB\fBrctl\fR\fR .ad .sp .6 .RS 4n \fBname\fR, \fBvalue\fR .RE .sp .ne 2 .na \fB\fBattr\fR\fR .ad .sp .6 .RS 4n \fBname\fR, \fBtype\fR, \fBvalue\fR .RE .sp .ne 2 .na \fB\fBdataset\fR\fR .ad .sp .6 .RS 4n \fBname\fR .RE .sp .ne 2 .na \fB\fBdedicated-cpu\fR\fR .ad .sp .6 .RS 4n \fBncpus\fR, \fBimportance\fR .RE .sp .ne 2 .na \fB\fBcapped-memory\fR\fR .ad .sp .6 .RS 4n \fBphysical\fR, \fBswap\fR, \fBlocked\fR .RE .sp .ne 2 .na \fB\fBcapped-cpu\fR\fR .ad .sp .6 .RS 4n \fBncpus\fR .RE .sp .LP As for the property values which are paired with these names, they are either simple, complex, or lists. The type allowed is property-specific. Simple values are strings, optionally enclosed within quotation marks. Complex values have the syntax: .sp .in +2 .nf (<\fIname\fR>=<\fIvalue\fR>,<\fIname\fR>=<\fIvalue\fR>,...) .fi .in -2 .sp .sp .LP where each <\fIvalue\fR> is simple, and the <\fIname\fR> strings are unique within a given property. Lists have the syntax: .sp .in +2 .nf [<\fIvalue\fR>,...] .fi .in -2 .sp .sp .LP where each <\fIvalue\fR> is either simple or complex. A list of a single value (either simple or complex) is equivalent to specifying that value without the list syntax. That is, "foo" is equivalent to "[foo]". A list can be empty (denoted by "[]"). .sp .LP In interpreting property values, \fBzonecfg\fR accepts regular expressions as specified in \fBfnmatch\fR(5). See \fBEXAMPLES\fR. .sp .LP The property types are described as follows: .sp .ne 2 .na \fBglobal: \fBzonename\fR\fR .ad .sp .6 .RS 4n The name of the zone. .RE .sp .ne 2 .na \fBglobal: \fBzonepath\fR\fR .ad .sp .6 .RS 4n Path to zone's file system. .RE .sp .ne 2 .na \fBglobal: \fBautoboot\fR\fR .ad .sp .6 .RS 4n Boolean indicating that a zone should be booted automatically at system boot. Note that if the zones service is disabled, the zone will not autoboot, regardless of the setting of this property. You enable the zones service with a \fBsvcadm\fR command, such as: .sp .in +2 .nf # \fBsvcadm enable svc:/system/zones:default\fR .fi .in -2 .sp Replace \fBenable\fR with \fBdisable\fR to disable the zones service. See \fBsvcadm\fR(1M). .RE .sp .ne 2 .na \fBglobal: \fBbootargs\fR\fR .ad .sp .6 .RS 4n Arguments (options) to be passed to the zone bootup, unless options are supplied to the "\fBzoneadm boot\fR" command, in which case those take precedence. The valid arguments are described in \fBzoneadm\fR(1M). .RE .sp .ne 2 .na \fBglobal: \fBpool\fR\fR .ad .sp .6 .RS 4n Name of the resource pool that this zone must be bound to when booted. This property is incompatible with the \fBdedicated-cpu\fR resource. .RE .sp .ne 2 .na \fBglobal: \fBlimitpriv\fR\fR .ad .sp .6 .RS 4n The maximum set of privileges any process in this zone can obtain. The property should consist of a comma-separated privilege set specification as described in \fBpriv_str_to_set\fR(3C). Privileges can be excluded from the resulting set by preceding their names with a dash (-) or an exclamation point (!). The special privilege string "zone" is not supported in this context. If the special string "default" occurs as the first token in the property, it expands into a safe set of privileges that preserve the resource and security isolation described in \fBzones\fR(5). A missing or empty property is equivalent to this same set of safe privileges. .sp The system administrator must take extreme care when configuring privileges for a zone. Some privileges cannot be excluded through this mechanism as they are required in order to boot a zone. In addition, there are certain privileges which cannot be given to a zone as doing so would allow processes inside a zone to unduly affect processes in other zones. \fBzoneadm\fR(1M) indicates when an invalid privilege has been added or removed from a zone's privilege set when an attempt is made to either "boot" or "ready" the zone. .sp See \fBprivileges\fR(5) for a description of privileges. The command "\fBppriv -l\fR" (see \fBppriv\fR(1)) produces a list of all Solaris privileges. You can specify privileges as they are displayed by \fBppriv\fR. In \fBprivileges\fR(5), privileges are listed in the form PRIV_\fIprivilege_name\fR. For example, the privilege \fIsys_time\fR, as you would specify it in this property, is listed in \fBprivileges\fR(5) as \fBPRIV_SYS_TIME\fR. .RE .sp .ne 2 .na \fBglobal: \fBbrand\fR\fR .ad .sp .6 .RS 4n The zone's brand type. .RE .sp .ne 2 .na \fBglobal: \fBip-type\fR\fR .ad .sp .6 .RS 4n A zone can either share the IP instance with the global zone, which is the default, or have its own exclusive instance of IP. .sp This property takes the values \fBshared\fR and \fBexclusive\fR. .RE .sp .ne 2 .na \fBglobal: \fBhostid\fR\fR .ad .sp .6 .RS 4n A zone can emulate a 32-bit host identifier to ease system consolidation. A zone's \fBhostid\fR property is empty by default, meaning that the zone does not emulate a host identifier. Zone host identifiers must be hexadecimal values between 0 and FFFFFFFE. A \fB0x\fR or \fB0X\fR prefix is optional. Both uppercase and lowercase hexadecimal digits are acceptable. .RE .sp .ne 2 .na \fB\fBfs\fR: dir, special, raw, type, options\fR .ad .sp .6 .RS 4n Values needed to determine how, where, and so forth to mount file systems. See \fBmount\fR(1M), \fBmount\fR(2), \fBfsck\fR(1M), and \fBvfstab\fR(4). .RE .sp .ne 2 .na \fB\fBnet\fR: address, physical, defrouter\fR .ad .sp .6 .RS 4n The network address and physical interface name of the network interface. The network address is one of: .RS +4 .TP .ie t \(bu .el o a valid IPv4 address, optionally followed by "\fB/\fR" and a prefix length; .RE .RS +4 .TP .ie t \(bu .el o a valid IPv6 address, which must be followed by "\fB/\fR" and a prefix length; .RE .RS +4 .TP .ie t \(bu .el o a host name which resolves to an IPv4 address. .RE Note that host names that resolve to IPv6 addresses are not supported. .sp The physical interface name is the network interface name. .sp The default router is specified similarly to the network address except that it must not be followed by a \fB/\fR (slash) and a network prefix length. .sp A zone can be configured to be either exclusive-IP or shared-IP. For a shared-IP zone, you must set both the physical and address properties; setting the default router is optional. The interface specified in the physical property must be plumbed in the global zone prior to booting the non-global zone. However, if the interface is not used by the global zone, it should be configured \fBdown\fR in the global zone, and the default router for the interface should be specified here. .sp For an exclusive-IP zone, the physical property must be set and the address and default router properties cannot be set. .RE .sp .ne 2 .na \fB\fBdevice\fR: match\fR .ad .sp .6 .RS 4n Device name to match. .RE .sp .ne 2 .na \fB\fBrctl\fR: name, value\fR .ad .sp .6 .RS 4n The name and \fIpriv\fR/\fIlimit\fR/\fIaction\fR triple of a resource control. See \fBprctl\fR(1) and \fBrctladm\fR(1M). The preferred way to set rctl values is to use the global property name associated with a specific rctl. .RE .sp .ne 2 .na \fB\fBattr\fR: name, type, value\fR .ad .sp .6 .RS 4n The name, type and value of a generic attribute. The \fBtype\fR must be one of \fBint\fR, \fBuint\fR, \fBboolean\fR or \fBstring\fR, and the value must be of that type. \fBuint\fR means unsigned , that is, a non-negative integer. .RE .sp .ne 2 .na \fB\fBdataset\fR: name\fR .ad .sp .6 .RS 4n The name of a \fBZFS\fR dataset to be accessed from within the zone. See \fBzfs\fR(1M). .RE .sp .ne 2 .na \fBglobal: \fBcpu-shares\fR\fR .ad .sp .6 .RS 4n The number of Fair Share Scheduler (FSS) shares to allocate to this zone. This property is incompatible with the \fBdedicated-cpu\fR resource. This property is the preferred way to set the \fBzone.cpu-shares\fR rctl. .RE .sp .ne 2 .na \fBglobal: \fBmax-lwps\fR\fR .ad .sp .6 .RS 4n The maximum number of LWPs simultaneously available to this zone. This property is the preferred way to set the \fBzone.max-lwps\fR rctl. .RE .sp .ne 2 .na \fBglobal: \fBmax-msg-ids\fR\fR .ad .sp .6 .RS 4n The maximum number of message queue IDs allowed for this zone. This property is the preferred way to set the \fBzone.max-msg-ids\fR rctl. .RE .sp .ne 2 .na \fBglobal: \fBmax-sem-ids\fR\fR .ad .sp .6 .RS 4n The maximum number of semaphore IDs allowed for this zone. This property is the preferred way to set the \fBzone.max-sem-ids\fR rctl. .RE .sp .ne 2 .na \fBglobal: \fBmax-shm-ids\fR\fR .ad .sp .6 .RS 4n The maximum number of shared memory IDs allowed for this zone. This property is the preferred way to set the \fBzone.max-shm-ids\fR rctl. .RE .sp .ne 2 .na \fBglobal: \fBmax-shm-memory\fR\fR .ad .sp .6 .RS 4n The maximum amount of shared memory allowed for this zone. This property is the preferred way to set the \fBzone.max-shm-memory\fR rctl. A scale (K, M, G, T) can be applied to the value for this number (for example, 1M is one megabyte). .RE .sp .ne 2 .na \fBglobal: \fBscheduling-class\fR\fR .ad .sp .6 .RS 4n Specifies the scheduling class used for processes running in a zone. When this property is not specified, the scheduling class is established as follows: .RS +4 .TP .ie t \(bu .el o If the \fBcpu-shares\fR property or equivalent rctl is set, the scheduling class FSS is used. .RE .RS +4 .TP .ie t \(bu .el o If neither \fBcpu-shares\fR nor the equivalent rctl is set and the zone's pool property references a pool that has a default scheduling class, that class is used. .RE .RS +4 .TP .ie t \(bu .el o Under any other conditions, the system default scheduling class is used. .RE .RE .sp .ne 2 .na \fB\fBdedicated-cpu\fR: ncpus, importance\fR .ad .sp .6 .RS 4n The number of CPUs that should be assigned for this zone's exclusive use. The zone will create a pool and processor set when it boots. See \fBpooladm\fR(1M) and \fBpoolcfg\fR(1M) for more information on resource pools. The \fBncpu\fR property can specify a single value or a range (for example, 1-4) of processors. The \fBimportance\fR property is optional; if set, it will specify the \fBpset.importance\fR value for use by \fBpoold\fR(1M). If this resource is used, there must be enough free processors to allocate to this zone when it boots or the zone will not boot. The processors assigned to this zone will not be available for the use of the global zone or other zones. This resource is incompatible with both the \fBpool\fR and \fBcpu-shares\fR properties. Only a single instance of this resource can be added to the zone. .RE .sp .ne 2 .na \fB\fBcapped-memory\fR: physical, swap, locked\fR .ad .sp .6 .RS 4n The caps on the memory that can be used by this zone. A scale (K, M, G, T) can be applied to the value for each of these numbers (for example, 1M is one megabyte). Each of these properties is optional but at least one property must be set when adding this resource. Only a single instance of this resource can be added to the zone. The \fBphysical\fR property sets the \fBmax-rss\fR for this zone. This will be enforced by \fBrcapd\fR(1M) running in the global zone. The \fBswap\fR property is the preferred way to set the \fBzone.max-swap\fR rctl. The \fBlocked\fR property is the preferred way to set the \fBzone.max-locked-memory\fR rctl. .RE .sp .ne 2 .na \fB\fBcapped-cpu\fR: ncpus\fR .ad .sp .6 .RS 4n Sets a limit on the amount of CPU time that can be used by a zone. The unit used translates to the percentage of a single CPU that can be used by all user threads in a zone, expressed as a fraction (for example, \fB\&.75\fR) or a mixed number (whole number and fraction, for example, \fB1.25\fR). An \fBncpu\fR value of \fB1\fR means 100% of a CPU, a value of \fB1.25\fR means 125%, \fB\&.75\fR mean 75%, and so forth. When projects within a capped zone have their own caps, the minimum value takes precedence. .sp The \fBcapped-cpu\fR property is an alias for \fBzone.cpu-cap\fR resource control and is related to the \fBzone.cpu-cap\fR resource control. See \fBresource_controls\fR(5). .RE .sp .ne 2 .na \fBglobal: \fBfs-allowed\fR\fR .ad .sp .6 .RS 4n A comma-separated list of additional filesystems that may be mounted within the zone; for example "ufs,pcfs". By default, only hsfs(7fs) and network filesystems can be mounted. If the first entry in the list is "-" then that disables all of the default filesystems. If any filesystems are listed after "-" then only those filesystems can be mounted. This property does not apply to filesystems mounted into the zone via "add fs" or "add dataset". WARNING: allowing filesystem mounts other than the default may allow the zone administrator to compromise the system with a malicious filesystem image, and is not supported. .RE .sp .LP The following table summarizes resources, property-names, and types: .sp .in +2 .nf resource property-name type (global) zonename simple (global) zonepath simple (global) autoboot simple (global) bootargs simple (global) pool simple (global) limitpriv simple (global) brand simple (global) ip-type simple (global) hostid simple (global) cpu-shares simple (global) max-lwps simple (global) max-msg-ids simple (global) max-sem-ids simple (global) max-shm-ids simple (global) max-shm-memory simple (global) scheduling-class simple fs dir simple special simple raw simple type simple options list of simple net address simple physical simple device match simple rctl name simple value list of complex attr name simple type simple value simple dataset name simple dedicated-cpu ncpus simple or range importance simple capped-memory physical simple with scale swap simple with scale locked simple with scale capped-cpu ncpus simple .fi .in -2 .sp .sp .LP To further specify things, the breakdown of the complex property "value" of the "rctl" resource type, it consists of three name/value pairs, the names being "priv", "limit" and "action", each of which takes a simple value. The "name" property of an "attr" resource is syntactically restricted in a fashion similar but not identical to zone names: it must begin with an alphanumeric, and can contain alphanumerics plus the hyphen (\fB-\fR), underscore (\fB_\fR), and dot (\fB\&.\fR) characters. Attribute names beginning with "zone" are reserved for use by the system. Finally, the "autoboot" global property must have a value of "true" or "false". .SS "Using Kernel Statistics to Monitor CPU Caps" .sp .LP Using the kernel statistics (\fBkstat\fR(3KSTAT)) module \fBcaps\fR, the system maintains information for all capped projects and zones. You can access this information by reading kernel statistics (\fBkstat\fR(3KSTAT)), specifying \fBcaps\fR as the \fBkstat\fR module name. The following command displays kernel statistics for all active CPU caps: .sp .in +2 .nf # \fBkstat caps::'/cpucaps/'\fR .fi .in -2 .sp .sp .LP A \fBkstat\fR(1M) command running in a zone displays only CPU caps relevant for that zone and for projects in that zone. See \fBEXAMPLES\fR. .sp .LP The following are cap-related arguments for use with \fBkstat\fR(1M): .sp .ne 2 .na \fB\fBcaps\fR\fR .ad .sp .6 .RS 4n The \fBkstat\fR module. .RE .sp .ne 2 .na \fB\fBproject_caps\fR or \fBzone_caps\fR\fR .ad .sp .6 .RS 4n \fBkstat\fR class, for use with the \fBkstat\fR \fB-c\fR option. .RE .sp .ne 2 .na \fB\fBcpucaps_project_\fR\fIid\fR or \fBcpucaps_zone_\fR\fIid\fR\fR .ad .sp .6 .RS 4n \fBkstat\fR name, for use with the \fBkstat\fR \fB-n\fR option. \fIid\fR is the project or zone identifier. .RE .sp .LP The following fields are displayed in response to a \fBkstat\fR(1M) command requesting statistics for all CPU caps. .sp .ne 2 .na \fB\fBmodule\fR\fR .ad .sp .6 .RS 4n In this usage of \fBkstat\fR, this field will have the value \fBcaps\fR. .RE .sp .ne 2 .na \fB\fBname\fR\fR .ad .sp .6 .RS 4n As described above, \fBcpucaps_project_\fR\fIid\fR or \fBcpucaps_zone_\fR\fIid\fR .RE .sp .ne 2 .na \fB\fBabove_sec\fR\fR .ad .sp .6 .RS 4n Total time, in seconds, spent above the cap. .RE .sp .ne 2 .na \fB\fBbelow_sec\fR\fR .ad .sp .6 .RS 4n Total time, in seconds, spent below the cap. .RE .sp .ne 2 .na \fB\fBmaxusage\fR\fR .ad .sp .6 .RS 4n Maximum observed CPU usage. .RE .sp .ne 2 .na \fB\fBnwait\fR\fR .ad .sp .6 .RS 4n Number of threads on cap wait queue. .RE .sp .ne 2 .na \fB\fBusage\fR\fR .ad .sp .6 .RS 4n Current aggregated CPU usage for all threads belonging to a capped project or zone, in terms of a percentage of a single CPU. .RE .sp .ne 2 .na \fB\fBvalue\fR\fR .ad .sp .6 .RS 4n The cap value, in terms of a percentage of a single CPU. .RE .sp .ne 2 .na \fB\fBzonename\fR\fR .ad .sp .6 .RS 4n Name of the zone for which statistics are displayed. .RE .sp .LP See \fBEXAMPLES\fR for sample output from a \fBkstat\fR command. .SH OPTIONS .sp .LP The following options are supported: .sp .ne 2 .na \fB\fB-f\fR \fIcommand_file\fR\fR .ad .sp .6 .RS 4n Specify the name of \fBzonecfg\fR command file. \fIcommand_file\fR is a text file of \fBzonecfg\fR subcommands, one per line. .RE .sp .ne 2 .na \fB\fB-z\fR \fIzonename\fR\fR .ad .sp .6 .RS 4n Specify the name of a zone. Zone names are case sensitive. Zone names must begin with an alphanumeric character and can contain alphanumeric characters, the underscore (\fB_\fR) the hyphen (\fB-\fR), and the dot (\fB\&.\fR). The name \fBglobal\fR and all names beginning with \fBSUNW\fR are reserved and cannot be used. .RE .SH SUBCOMMANDS .sp .LP You can use the \fBadd\fR and \fBselect\fR subcommands to select a specific resource, at which point the scope changes to that resource. The \fBend\fR and \fBcancel\fR subcommands are used to complete the resource specification, at which time the scope is reverted back to global. Certain subcommands, such as \fBadd\fR, \fBremove\fR and \fBset\fR, have different semantics in each scope. .sp .LP \fBzonecfg\fR supports a semicolon-separated list of subcommands. For example: .sp .in +2 .nf # \fBzonecfg -z myzone "add net; set physical=myvnic; end"\fR .fi .in -2 .sp .sp .LP Subcommands which can result in destructive actions or loss of work have an \fB-F\fR option to force the action. If input is from a terminal device, the user is prompted when appropriate if such a command is given without the \fB-F\fR option otherwise, if such a command is given without the \fB-F\fR option, the action is disallowed, with a diagnostic message written to standard error. .sp .LP The following subcommands are supported: .sp .ne 2 .na \fB\fBadd\fR \fIresource-type\fR (global scope)\fR .ad .br .na \fB\fBadd\fR \fIproperty-name property-value\fR (resource scope)\fR .ad .sp .6 .RS 4n In the global scope, begin the specification for a given resource type. The scope is changed to that resource type. .sp In the resource scope, add a property of the given name with the given value. The syntax for property values varies with different property types. In general, it is a simple value or a list of simple values enclosed in square brackets, separated by commas (\fB[foo,bar,baz]\fR). See \fBPROPERTIES\fR. .RE .sp .ne 2 .na \fB\fBcancel\fR\fR .ad .sp .6 .RS 4n End the resource specification and reset scope to global. Abandons any partially specified resources. \fBcancel\fR is only applicable in the resource scope. .RE .sp .ne 2 .na \fB\fBclear\fR \fIproperty-name\fR\fR .ad .sp .6 .RS 4n Clear the value for the property. .RE .sp .ne 2 .na \fB\fBcommit\fR\fR .ad .sp .6 .RS 4n Commit the current configuration from memory to stable storage. The configuration must be committed to be used by \fBzoneadm\fR. Until the in-memory configuration is committed, you can remove changes with the \fBrevert\fR subcommand. The \fBcommit\fR operation is attempted automatically upon completion of a \fBzonecfg\fR session. Since a configuration must be correct to be committed, this operation automatically does a verify. .RE .sp .ne 2 .na \fB\fBcreate [\fR\fB-F\fR\fB] [\fR \fB-a\fR \fIpath\fR |\fB-b\fR \fB|\fR \fB-t\fR \fItemplate\fR\fB]\fR\fR .ad .sp .6 .RS 4n Create an in-memory configuration for the specified zone. Use \fBcreate\fR to begin to configure a new zone. See \fBcommit\fR for saving this to stable storage. .sp If you are overwriting an existing configuration, specify the \fB-F\fR option to force the action. Specify the \fB-t\fR \fItemplate\fR option to create a configuration identical to \fItemplate\fR, where \fItemplate\fR is the name of a configured zone. .sp Use the \fB-a\fR \fIpath\fR option to facilitate configuring a detached zone on a new host. The \fIpath\fR parameter is the zonepath location of a detached zone that has been moved on to this new host. Once the detached zone is configured, it should be installed using the "\fBzoneadm attach\fR" command (see \fBzoneadm\fR(1M)). All validation of the new zone happens during the \fBattach\fR process, not during zone configuration. .sp Use the \fB-b\fR option to create a blank configuration. Without arguments, \fBcreate\fR applies the Sun default settings. .RE .sp .ne 2 .na \fB\fBdelete [\fR\fB-F\fR\fB]\fR\fR .ad .sp .6 .RS 4n Delete the specified configuration from memory and stable storage. This action is instantaneous, no commit is necessary. A deleted configuration cannot be reverted. .sp Specify the \fB-F\fR option to force the action. .RE .sp .ne 2 .na \fB\fBend\fR\fR .ad .sp .6 .RS 4n End the resource specification. This subcommand is only applicable in the resource scope. \fBzonecfg\fR checks to make sure the current resource is completely specified. If so, it is added to the in-memory configuration (see \fBcommit\fR for saving this to stable storage) and the scope reverts to global. If the specification is incomplete, it issues an appropriate error message. .RE .sp .ne 2 .na \fB\fBexport [\fR\fB-f\fR \fIoutput-file\fR\fB]\fR\fR .ad .sp .6 .RS 4n Print configuration to standard output. Use the \fB-f\fR option to print the configuration to \fIoutput-file\fR. This option produces output in a form suitable for use in a command file. .RE .sp .ne 2 .na \fB\fBhelp [usage] [\fIsubcommand\fR] [syntax] [\fR\fIcommand-name\fR\fB]\fR\fR .ad .sp .6 .RS 4n Print general help or help about given topic. .RE .sp .ne 2 .na \fB\fBinfo zonename | zonepath | autoboot | brand | pool | limitpriv\fR\fR .ad .br .na \fB\fBinfo [\fR\fIresource-type\fR \fB[\fR\fIproperty-name\fR\fB=\fR\fIproperty-value\fR\fB]*]\fR\fR .ad .sp .6 .RS 4n Display information about the current configuration. If \fIresource-type\fR is specified, displays only information about resources of the relevant type. If any \fIproperty-name\fR value pairs are specified, displays only information about resources meeting the given criteria. In the resource scope, any arguments are ignored, and \fBinfo\fR displays information about the resource which is currently being added or modified. .RE .sp .ne 2 .na \fB\fBremove\fR \fIresource-type\fR\fB{\fR\fIproperty-name\fR\fB=\fR\fIproperty -value\fR\fB}\fR(global scope)\fR .ad .sp .6 .RS 4n In the global scope, removes the specified resource. The \fB[]\fR syntax means 0 or more of whatever is inside the square braces. If you want only to remove a single instance of the resource, you must specify enough property name-value pairs for the resource to be uniquely identified. If no property name-value pairs are specified, all instances will be removed. If there is more than one pair is specified, a confirmation is required, unless you use the \fB-F\fR option. .RE .sp .ne 2 .na \fB\fBselect\fR \fIresource-type\fR \fB{\fR\fIproperty-name\fR\fB=\fR\fIproperty-value\fR\fB}\fR\fR .ad .sp .6 .RS 4n Select the resource of the given type which matches the given \fIproperty-name\fR \fIproperty-value\fR pair criteria, for modification. This subcommand is applicable only in the global scope. The scope is changed to that resource type. The \fB{}\fR syntax means 1 or more of whatever is inside the curly braces. You must specify enough \fIproperty -name property-value\fR pairs for the resource to be uniquely identified. .RE .sp .ne 2 .na \fB\fBset\fR \fIproperty-name\fR\fB=\fR\fIproperty\fR\fB-\fR\fIvalue\fR\fR .ad .sp .6 .RS 4n Set a given property name to the given value. Some properties (for example, \fBzonename\fR and \fBzonepath\fR) are global while others are resource-specific. This subcommand is applicable in both the global and resource scopes. .RE .sp .ne 2 .na \fB\fBverify\fR\fR .ad .sp .6 .RS 4n Verify the current configuration for correctness: .RS +4 .TP .ie t \(bu .el o All resources have all of their required properties specified. .RE .RS +4 .TP .ie t \(bu .el o A \fBzonepath\fR is specified. .RE .RE .sp .ne 2 .na \fB\fBrevert\fR \fB[\fR\fB-F\fR\fB]\fR\fR .ad .sp .6 .RS 4n Revert the configuration back to the last committed state. The \fB-F\fR option can be used to force the action. .RE .sp .ne 2 .na \fB\fBexit [\fR\fB-F\fR\fB]\fR\fR .ad .sp .6 .RS 4n Exit the \fBzonecfg\fR session. A commit is automatically attempted if needed. You can also use an \fBEOF\fR character to exit \fBzonecfg\fR. The \fB-F\fR option can be used to force the action. .RE .SH EXAMPLES .LP \fBExample 1 \fRCreating the Environment for a New Zone .sp .LP In the following example, \fBzonecfg\fR creates the environment for a new zone. \fB/usr/local\fR is loopback mounted from the global zone into \fB/opt/local\fR. \fB/opt/sfw\fR is loopback mounted from the global zone, three logical network interfaces are added, and a limit on the number of fair-share scheduler (FSS) CPU shares for a zone is set using the \fBrctl\fR resource type. The example also shows how to select a given resource for modification. .sp .in +2 .nf example# \fBzonecfg -z myzone3\fR my-zone3: No such zone configured Use 'create' to begin configuring a new zone. zonecfg:myzone3> \fBcreate\fR zonecfg:myzone3> \fBset zonepath=/export/home/my-zone3\fR zonecfg:myzone3> \fBset autoboot=true\fR zonecfg:myzone3> \fBadd fs\fR zonecfg:myzone3:fs> \fBset dir=/usr/local\fR zonecfg:myzone3:fs> \fBset special=/opt/local\fR zonecfg:myzone3:fs> \fBset type=lofs\fR zonecfg:myzone3:fs> \fBadd options [ro,nodevices]\fR zonecfg:myzone3:fs> \fBend\fR zonecfg:myzone3> \fBadd fs\fR zonecfg:myzone3:fs> \fBset dir=/mnt\fR zonecfg:myzone3:fs> \fBset special=/dev/dsk/c0t0d0s7\fR zonecfg:myzone3:fs> \fBset raw=/dev/rdsk/c0t0d0s7\fR zonecfg:myzone3:fs> \fBset type=ufs\fR zonecfg:myzone3:fs> \fBend\fR zonecfg:myzone3> \fBadd net\fR zonecfg:myzone3:net> \fBset address=192.168.0.1/24\fR zonecfg:myzone3:net> \fBset physical=eri0\fR zonecfg:myzone3:net> \fBend\fR zonecfg:myzone3> \fBadd net\fR zonecfg:myzone3:net> \fBset address=192.168.1.2/24\fR zonecfg:myzone3:net> \fBset physical=eri0\fR zonecfg:myzone3:net> \fBend\fR zonecfg:myzone3> \fBadd net\fR zonecfg:myzone3:net> \fBset address=192.168.2.3/24\fR zonecfg:myzone3:net> \fBset physical=eri0\fR zonecfg:myzone3:net> \fBend\fR zonecfg:my-zone3> \fBset cpu-shares=5\fR zonecfg:my-zone3> \fBadd capped-memory\fR zonecfg:my-zone3:capped-memory> \fBset physical=50m\fR zonecfg:my-zone3:capped-memory> \fBset swap=100m\fR zonecfg:my-zone3:capped-memory> \fBend\fR zonecfg:myzone3> \fBexit\fR .fi .in -2 .sp .LP \fBExample 2 \fRCreating a Non-Native Zone .sp .LP The following example creates a new Linux zone: .sp .in +2 .nf example# \fBzonecfg -z lxzone\fR lxzone: No such zone configured Use 'create' to begin configuring a new zone zonecfg:lxzone> \fBcreate -t SUNWlx\fR zonecfg:lxzone> \fBset zonepath=/export/zones/lxzone\fR zonecfg:lxzone> \fBset autoboot=true\fR zonecfg:lxzone> \fBexit\fR .fi .in -2 .sp .LP \fBExample 3 \fRCreating an Exclusive-IP Zone .sp .LP The following example creates a zone that is granted exclusive access to \fBbge1\fR and \fBbge33000\fR and that is isolated at the IP layer from the other zones configured on the system. .sp .LP The IP addresses and routing is configured inside the new zone using \fBsysidtool\fR(1M). .sp .in +2 .nf example# \fBzonecfg -z excl\fR excl: No such zone configured Use 'create' to begin configuring a new zone zonecfg:excl> \fBcreate\fR zonecfg:excl> \fBset zonepath=/export/zones/excl\fR zonecfg:excl> \fBset ip-type=exclusive\fR zonecfg:excl> \fBadd net\fR zonecfg:excl:net> \fBset physical=bge1\fR zonecfg:excl:net> \fBend\fR zonecfg:excl> \fBadd net\fR zonecfg:excl:net> \fBset physical=bge33000\fR zonecfg:excl:net> \fBend\fR zonecfg:excl> \fBexit\fR .fi .in -2 .sp .LP \fBExample 4 \fRAssociating a Zone with a Resource Pool .sp .LP The following example shows how to associate an existing zone with an existing resource pool: .sp .in +2 .nf example# \fBzonecfg -z myzone\fR zonecfg:myzone> \fBset pool=mypool\fR zonecfg:myzone> \fBexit\fR .fi .in -2 .sp .sp .LP For more information about resource pools, see \fBpooladm\fR(1M) and \fBpoolcfg\fR(1M). .LP \fBExample 5 \fRChanging the Name of a Zone .sp .LP The following example shows how to change the name of an existing zone: .sp .in +2 .nf example# \fBzonecfg -z myzone\fR zonecfg:myzone> \fBset zonename=myzone2\fR zonecfg:myzone2> \fBexit\fR .fi .in -2 .sp .LP \fBExample 6 \fRChanging the Privilege Set of a Zone .sp .LP The following example shows how to change the set of privileges an existing zone's processes will be limited to the next time the zone is booted. In this particular case, the privilege set will be the standard safe set of privileges a zone normally has along with the privilege to change the system date and time: .sp .in +2 .nf example# \fBzonecfg -z myzone\fR zonecfg:myzone> \fBset limitpriv="default,sys_time"\fR zonecfg:myzone2> \fBexit\fR .fi .in -2 .sp .LP \fBExample 7 \fRSetting the \fBzone.cpu-shares\fR Property for the Global Zone .sp .LP The following command sets the \fBzone.cpu-shares\fR property for the global zone: .sp .in +2 .nf example# \fBzonecfg -z global\fR zonecfg:global> \fBset cpu-shares=5\fR zonecfg:global> \fBexit\fR .fi .in -2 .sp .LP \fBExample 8 \fRUsing Pattern Matching .sp .LP The following commands illustrate \fBzonecfg\fR support for pattern matching. In the zone \fBflexlm\fR, enter: .sp .in +2 .nf zonecfg:flexlm> \fBadd device\fR zonecfg:flexlm:device> \fBset match="/dev/cua/a00[2-5]"\fR zonecfg:flexlm:device> \fBend\fR .fi .in -2 .sp .sp .LP In the global zone, enter: .sp .in +2 .nf global# \fBls /dev/cua\fR a a000 a001 a002 a003 a004 a005 a006 a007 b .fi .in -2 .sp .sp .LP In the zone \fBflexlm\fR, enter: .sp .in +2 .nf flexlm# \fBls /dev/cua\fR a002 a003 a004 a005 .fi .in -2 .sp .LP \fBExample 9 \fRSetting a Cap for a Zone to Three CPUs .sp .LP The following sequence uses the \fBzonecfg\fR command to set the CPU cap for a zone to three CPUs. .sp .in +2 .nf zonecfg:myzone> \fBadd capped-cpu\fR zonecfg:myzone>capped-cpu> \fBset ncpus=3\fR zonecfg:myzone>capped-cpu>capped-cpu> \fBend\fR .fi .in -2 .sp .sp .LP The preceding sequence, which uses the capped-cpu property, is equivalent to the following sequence, which makes use of the \fBzone.cpu-cap\fR resource control. .sp .in +2 .nf zonecfg:myzone> \fBadd rctl\fR zonecfg:myzone:rctl> \fBset name=zone.cpu-cap\fR zonecfg:myzone:rctl> \fBadd value (priv=privileged,limit=300,action=none)\fR zonecfg:myzone:rctl> \fBend\fR .fi .in -2 .sp .LP \fBExample 10 \fRUsing \fBkstat\fR to Monitor CPU Caps .sp .LP The following command displays information about all CPU caps. .sp .in +2 .nf # \fBkstat -n /cpucaps/\fR module: caps instance: 0 name: cpucaps_project_0 class: project_caps above_sec 0 below_sec 2157 crtime 821.048183159 maxusage 2 nwait 0 snaptime 235885.637253027 usage 0 value 18446743151372347932 zonename global module: caps instance: 0 name: cpucaps_project_1 class: project_caps above_sec 0 below_sec 0 crtime 225339.192787265 maxusage 5 nwait 0 snaptime 235885.637591677 usage 5 value 18446743151372347932 zonename global module: caps instance: 0 name: cpucaps_project_201 class: project_caps above_sec 0 below_sec 235105 crtime 780.37961782 maxusage 100 nwait 0 snaptime 235885.637789687 usage 43 value 100 zonename global module: caps instance: 0 name: cpucaps_project_202 class: project_caps above_sec 0 below_sec 235094 crtime 791.72983782 maxusage 100 nwait 0 snaptime 235885.637967512 usage 48 value 100 zonename global module: caps instance: 0 name: cpucaps_project_203 class: project_caps above_sec 0 below_sec 235034 crtime 852.104401481 maxusage 75 nwait 0 snaptime 235885.638144304 usage 47 value 100 zonename global module: caps instance: 0 name: cpucaps_project_86710 class: project_caps above_sec 22 below_sec 235166 crtime 698.441717859 maxusage 101 nwait 0 snaptime 235885.638319871 usage 54 value 100 zonename global module: caps instance: 0 name: cpucaps_zone_0 class: zone_caps above_sec 100733 below_sec 134332 crtime 821.048177123 maxusage 207 nwait 2 snaptime 235885.638497731 usage 199 value 200 zonename global module: caps instance: 1 name: cpucaps_project_0 class: project_caps above_sec 0 below_sec 0 crtime 225360.256448422 maxusage 7 nwait 0 snaptime 235885.638714404 usage 7 value 18446743151372347932 zonename test_001 module: caps instance: 1 name: cpucaps_zone_1 class: zone_caps above_sec 2 below_sec 10524 crtime 225360.256440278 maxusage 106 nwait 0 snaptime 235885.638896443 usage 7 value 100 zonename test_001 .fi .in -2 .sp .LP \fBExample 11 \fRDisplaying CPU Caps for a Specific Zone or Project .sp .LP Using the \fBkstat\fR \fB-c\fR and \fB-i\fR options, you can display CPU caps for a specific zone or project, as below. The first command produces a display for a specific project, the second for the same project within zone 1. .sp .in +2 .nf # \fBkstat -c project_caps\fR # \fBkstat -c project_caps -i 1\fR .fi .in -2 .sp .SH EXIT STATUS .sp .LP The following exit values are returned: .sp .ne 2 .na \fB\fB0\fR\fR .ad .sp .6 .RS 4n Successful completion. .RE .sp .ne 2 .na \fB\fB1\fR\fR .ad .sp .6 .RS 4n An error occurred. .RE .sp .ne 2 .na \fB\fB2\fR\fR .ad .sp .6 .RS 4n Invalid usage. .RE .SH ATTRIBUTES .sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp .sp .TS box; c | c l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE _ Interface Stability Volatile .TE .SH SEE ALSO .sp .LP \fBppriv\fR(1), \fBprctl\fR(1), \fBzlogin\fR(1), \fBkstat\fR(1M), \fBmount\fR(1M), \fBpooladm\fR(1M), \fBpoolcfg\fR(1M), \fBpoold\fR(1M), \fBrcapd\fR(1M), \fBrctladm\fR(1M), \fBsvcadm\fR(1M), \fBsysidtool\fR(1M), \fBzfs\fR(1M), \fBzoneadm\fR(1M), \fBpriv_str_to_set\fR(3C), \fBkstat\fR(3KSTAT), \fBvfstab\fR(4), \fBattributes\fR(5), \fBbrands\fR(5), \fBfnmatch\fR(5), \fBlx\fR(5), \fBprivileges\fR(5), \fBresource_controls\fR(5), \fBzones\fR(5) .sp .LP \fISystem Administration Guide: Solaris Containers-Resource Management, and Solaris Zones\fR .SH NOTES .sp .LP All character data used by \fBzonecfg\fR must be in US-ASCII encoding.