'\" te .\" Copyright (c) 2004, Sun Microsystems, Inc. All Rights Reserved .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner] .TH METASTAT 1M "Mar 26, 2006" .SH NAME metastat \- display status for metadevice or hot spare pool .SH SYNOPSIS .LP .nf \fB/usr/sbin/metastat\fR \fB-h\fR .fi .LP .nf \fB/usr/sbin/metastat\fR [\fB-a\fR] [\fB-B\fR] [\fB-D\fR] [\fB-c\fR] [\fB-i\fR] [\fB-p\fR] [\fB-q\fR] [\fB-s\fR \fIsetname\fR] [\fB-t\fR] [\fImetadevice...\fR] [\fIhot_spare_pool\fR...] .fi .LP .nf \fB/usr/sbin/metastat\fR [\fB-a\fR] [\fB-B\fR] [\fB-D\fR] [\fB-c\fR] [\fB-i\fR] [\fB-p\fR] [\fB-q\fR] [\fB-s\fR \fIsetname\fR] \fIcomponent\fR... .fi .SH DESCRIPTION .sp .LP The \fBmetastat\fR command displays the current status for each metadevice (including stripes, concatenations, concatenations of stripes, mirrors, RAID5, soft partitions, and trans devices) or hot spare pool, or of specified metadevices, components, or hot spare pools. .sp .LP It is helpful to run the \fBmetastat\fR command after using the \fBmetattach\fR command to view the status of the metadevice. .sp .LP \fBmetastat\fR displays the state of each Solaris Volume Manager RAID-1 volume on the system. The possible states include: .sp .ne 2 .na \fB\fBOkay\fR\fR .ad .RS 21n The device reports no errors. .RE .sp .ne 2 .na \fB\fBNeeds maintenance\fR\fR .ad .RS 21n A problem has been detected. This requires that the system administrator replace the failed physical device. Volumes displaying \fBNeeds maintenance\fR have incurred no data loss, although additional failures could risk data loss. Take action as quickly as possible. .RE .sp .ne 2 .na \fB\fBLast erred\fR\fR .ad .RS 21n A problem has been detected. Data loss is a possibility. This might occur if a component of a submirror fails and is not replaced by a hot spare, therefore going into \fBNeeds maintenance\fR state. If the corresponding component also fails, it would go into \fBLast erred\fR state and, as there is no remaining valid data source, data loss could be a possibility. .RE .sp .ne 2 .na \fB\fBUnavailable\fR\fR .ad .RS 21n A device cannot be accessed, but has not incurred errors. This might occur if a physical device has been removed with Solaris Dynamic Reconfiguration (DR) features, thus leaving the Solaris Volume Manager volume unavailable. It could also occur if an array or disk is powered off at system initialization, or if a >1TB volume is present when the system is booted in 32-bit mode. .sp After the storage has been made available, run the \fBmetastat\fR command with the \fB-i\fR option to update the status of the metadevices. This clears the unavailable state for accessible devices. .RE .sp .LP See the \fI\fR for instructions on replacing disks and handling volumes in Needs maintenance or Last erred states. .SH OPTIONS .sp .LP The following options are supported: .sp .ne 2 .na \fB\fB-a\fR\fR .ad .RS 14n Display all disk sets. Only metadevices in disk sets that are owned by the current host are displayed. .RE .sp .ne 2 .na \fB\fB-B\fR\fR .ad .RS 14n Display the current status of all of the 64-bit metadevices and hot spares. .RE .sp .ne 2 .na \fB\fB-c\fR\fR .ad .RS 14n Display concise output. .sp There is one line of output for each metadevice. The output shows the basic structure and the error status, if any, for each metadevice. .sp The \fB-c\fR output format is distinct from the \fB-p\fR output format. The \fB-p\fR option does not display metadevice status and is not intended as human-readable output. .RE .sp .ne 2 .na \fB\fB-D\fR\fR .ad .RS 14n Display the current status of all of the descriptive name metadevices and hotspares. .RE .sp .ne 2 .na \fB\fB-h\fR\fR .ad .RS 14n Display usage message. .RE .sp .ne 2 .na \fB\fB-i\fR\fR .ad .RS 14n Check the status of RAID-1 (mirror) volumes, RAID-5 volumes, and hot spares. The inquiry checks each metadevice for accessibility, starting at the top level metadevice. When problems are discovered, the metadevice state databases are updated as if an error had occurred. .RE .sp .ne 2 .na \fB\fB-p\fR\fR .ad .RS 14n Display the list of active metadevices and hot spare pools in the same format as \fBmd.tab\fR. See \fBmd.tab\fR(4). .sp The \fB-p\fR output is designed for snapshotting the configuration for later recovery or setup. .RE .sp .ne 2 .na \fB\fB-q\fR\fR .ad .RS 14n Display the status for metadevices without the device relocation information. .RE .sp .ne 2 .na \fB\fB-s\fR \fB\fIsetname\fR\fR\fR .ad .RS 14n Specify the name of the disk set on which \fBmetastat\fR works. Using the \fB-s\fR option causes the command to perform its administrative function within the specified disk set. Without this option, the command performs its function on metadevices and hot spare pools in the local disk set. .RE .sp .ne 2 .na \fB\fB-t\fR\fR .ad .RS 14n Display the current status and timestamp for the specified metadevices and hot spare pools. The timestamp provides the date and time of the last state change. .RE .SH OPERANDS .sp .LP The following operands are supported: .sp .ne 2 .na \fB\fIcomponent\fR\fR .ad .RS 18n Display the status of the component hosting a soft partition, including extents, starting blocks, and block count. .RE .sp .ne 2 .na \fB\fIhot_spare_pool\fR\fR .ad .RS 18n Display the status of the specified hot spare pool(s). .RE .sp .ne 2 .na \fB\fImetadevice\fR\fR .ad .RS 18n Display the status of the specified metadevice(s). If a trans metadevice is specified, the status of the master and log devices is also displayed. Trans metadevices have been replaced by UFS logging. See \fBNOTES\fR. .RE .SH EXAMPLES .LP \fBExample 1 \fROutput Showing Mirror with Two Submirrors .sp .LP The following example shows the partial output of the \fBmetastat\fR command after creating a mirror, \fBopt_mirror\fR, consisting of two submirrors, \fBopt_sub1\fR and \fBopt_sub2\fR. .sp .in +2 .nf # metastat opt_mirror opt_mirror: Mirror Submirror 0: opt_sub1 State: Okay Submirror 1: opt_sub2 State: Resyncing Resync in progress: 15 % done Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Size: 2006130 blocks . . . .fi .in -2 .sp .LP \fBExample 2 \fRSoft Partition on Mirror with Submirror .sp .LP The following example shows the partial output of the \fBmetastat\fR command after creating a soft partition, \fBd3\fR, on concat \fBd2\fR, which is built on a soft partition. .sp .in +2 .nf # metastat d2: Concat/Stripe Size: 204800 blocks Stripe 0: Device Start Block Dbase State Hot Spare d0 0 No Okay d0: Soft Partition Component: c0t3d0s0 Status: Okay Size: 204800 blocks Extent Start Block Block count 0 129 204800 d3: Soft Partition Component: d2 Status: Okay Size: 202752 blocks Extent Start Block Block count 0 129 202752 .fi .in -2 .sp .LP \fBExample 3 \fRTrans Metadevice .sp .LP The following example shows the output of the \fBmetastat\fR command after creating a trans metadevice. .sp .in +2 .nf # metastat d2: Concat/Stripe Size: 204800 blocks Stripe 0: Device Start Block Dbase State Hot Spare d0 0 No Okay d0: Soft Partition Component: c0t3d0s0 Status: Okay Size: 204800 blocks Extent Start Block Block count 0 129 204800 d3: Soft Partition Component: d2 Status: Okay Size: 202752 blocks Extent Start Block Block count 0 129 202752 .fi .in -2 .sp .LP \fBExample 4 \fRMulti-owner disk set .sp .LP The following example shows the output of the \fBmetastat\fR command with a multi-owner disk set and application-based mirror resynchronization option. Application-based resynchronization is set automatically if needed. .sp .in +2 .nf # metastat -s oban oban/d100: Mirror Submirror 0: oban/d10 State: Okay Submirror 1: oban/d11 State: Okay Pass: 1 Read option: roundrobin (default) Write option: parallel (default) Resync option: application based Owner: None Size: 1027216 blocks (501 MB) oban/d10: Submirror of oban/d100 State: Okay Size: 1027216 blocks (501 MB) Stripe 0: Device Start Block Dbase State Reloc Hot Spare c1t3d0s0 0 No Okay oban/d11: Submirror of oban/d100 State: Okay Size: 1027216 blocks (501 MB) Stripe 0: Device Start Block Dbase State Reloc Hot Spare c1t4d0s0 0 No Okay .fi .in -2 .sp .SH WARNINGS .sp .LP \fBmetastat\fR displays states as of the time the command is entered. It is unwise to use the output of the \fBmetastat\fR \fB-p\fR command to create a \fBmd.tab\fR(4) file for a number of reasons: .RS +4 .TP .ie t \(bu .el o The output of \fBmetastat\fR \fB-p\fR might show hot spares being used. .RE .RS +4 .TP .ie t \(bu .el o It might show mirrors with multiple submirrors. See \fBmetainit\fR(1M) for instructions for creating multi-way mirrors using \fBmetainit\fR and \fBmetattach\fR. .RE .RS +4 .TP .ie t \(bu .el o A slice may go into an error state after \fBmetastat\fR \fB-p\fR is issued. .RE .SH EXIT STATUS .sp .LP The following exit values are returned: .sp .ne 2 .na \fB\fB0\fR\fR .ad .RS 6n Successful completion. .RE .sp .ne 2 .na \fB\fB>0\fR\fR .ad .RS 6n An error occurred. .RE .SH ATTRIBUTES .sp .LP See \fBattributes\fR(5) for descriptions of the following attributes: .sp .sp .TS box; c | c l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE _ Interface Stability Stable .TE .SH SEE ALSO .sp .LP \fBmdmonitord\fR(1M), \fBmetaclear\fR(1M), \fBmetadb\fR(1M), \fBmetadetach\fR(1M), \fBmetahs\fR(1M), \fBmetainit\fR(1M), \fBmetaoffline\fR(1M), \fBmetaonline\fR(1M), \fBmetaparam\fR(1M), \fBmetarecover\fR(1M), \fBmetarename\fR(1M), \fBmetareplace\fR(1M), \fBmetaroot\fR(1M), \fBmetaset\fR(1M), \fBmetassist\fR(1M), \fBmetasync\fR(1M), \fBmetattach\fR(1M), \fBmd.tab\fR(4), \fBmd.cf\fR(4), \fBmddb.cf\fR(4), \fBmd.tab\fR(4), \fBattributes\fR(5), \fBmd\fR(7D) .sp .LP \fI\fR .SH NOTES .sp .LP Trans metadevices have been replaced by UFS logging. Existing trans devices are \fBnot\fR logging--they pass data directly through to the underlying device. See \fBmount_ufs\fR(1M) for more information about UFS logging.