/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1983, 1984, 1985, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ /* * Portions of this source code were derived from Berkeley * 4.3 BSD under license from the Regents of the University of * California. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * Generic XDR routines impelmentation. * * These are the "floating point" xdr routines used to (de)serialize * most common data items. See xdr.h for more info on the interface to * xdr. */ #include "mt.h" #include #include #include #include /* * This routine works on Suns, 3b2, 68000s, 386 and Vaxen in a manner * which is very efficient as bit twiddling is all that is needed. All * other machines can use this code but the code is inefficient as * various mathematical operations are used to generate the ieee format. * In addition rounding errors may occur due to the calculations involved. * To be most efficient, new machines should have their own ifdefs. * The encoding routines will fail if the machines try to encode a * float/double whose value can not be represented by the ieee format, * e.g. the exponent is too big/small. * ieee largest float = (2 ^ 128) * 0x1.fffff * ieee smallest float = (2 ^ -127) * 0x1.00000 * ieee largest double = (2 ^ 1024) * 0x1.fffff * ieee smallest double = (2 ^ -1023) * 0x1.00000 * The decoding routines assumes that the receiving machine can handle * floats/doubles as large/small as the values stated above. If you * use a machine which can not represent these values, you will need * to put ifdefs in the decode sections to identify areas of failure. */ #if defined(vax) /* * What IEEE single precision floating point looks like this on a * vax. */ struct ieee_single { unsigned int mantissa: 23; unsigned int exp : 8; unsigned int sign : 1; }; #define IEEE_SNG_BIAS 0x7f #define VAX_SNG_BIAS 0x81 /* Vax single precision floating point */ struct vax_single { unsigned int mantissa1 : 7; unsigned int exp : 8; unsigned int sign : 1; unsigned int mantissa2 : 16; }; #define VAX_SNG_BIAS 0x81 static struct sgl_limits { struct vax_single s; struct ieee_single ieee; } sgl_limits[2] = { {{ 0x7f, 0xff, 0x0, 0xffff }, /* Max Vax */ { 0x0, 0xff, 0x0 }}, /* Max IEEE */ {{ 0x0, 0x0, 0x0, 0x0 }, /* Min Vax */ { 0x0, 0x0, 0x0 }} /* Min IEEE */ }; #endif /* vax */ bool_t xdr_float(XDR *xdrs, float *fp) { #if defined(vax) struct ieee_single is; struct vax_single vs, *vsp; struct sgl_limits *lim; size_t i; #endif switch (xdrs->x_op) { case XDR_ENCODE: #if defined(mc68000) || defined(sparc) || defined(u3b2) || \ defined(u3b15) || defined(i386) || defined(amd64) return (XDR_PUTINT32(xdrs, (int *)fp)); #else #if defined(vax) vs = *((struct vax_single *)fp); if ((vs.exp == 1) || (vs.exp == 2)) { /* map these to subnormals */ is.exp = 0; is.mantissa = (vs.mantissa1 << 16) | vs.mantissa2; /* lose some precision */ is.mantissa >>= 3 - vs.exp; is.mantissa += (1 << (20 + vs.exp)); goto shipit; } for (i = 0, lim = sgl_limits; i < (int)(sizeof (sgl_limits) / sizeof (struct sgl_limits)); i++, lim++) { if ((vs.mantissa2 == lim->s.mantissa2) && (vs.exp == lim->s.exp) && (vs.mantissa1 == lim->s.mantissa1)) { is = lim->ieee; goto shipit; } } is.exp = vs.exp - VAX_SNG_BIAS + IEEE_SNG_BIAS; is.mantissa = (vs.mantissa1 << 16) | vs.mantissa2; shipit: is.sign = vs.sign; return (XDR_PUTINT32(xdrs, (int32_t *)&is)); #else { /* * Every machine can do this, its just not very efficient. * In addtion, some rounding errors may occur do to the * calculations involved. */ float f; int neg = 0; int exp = 0; int32_t val; f = *fp; if (f == 0) { val = 0; return (XDR_PUTINT32(xdrs, &val)); } if (f < 0) { f = 0 - f; neg = 1; } while (f < 1) { f = f * 2; --exp; } while (f >= 2) { f = f/2; ++exp; } if ((exp > 128) || (exp < -127)) { /* over or under flowing ieee exponent */ return (FALSE); } val = neg; val = val << 8; /* for the exponent */ val += 127 + exp; /* 127 is the bias */ val = val << 23; /* for the mantissa */ val += (int32_t)((f - 1) * 8388608); /* 2 ^ 23 */ return (XDR_PUTINT32(xdrs, &val)); } #endif #endif case XDR_DECODE: #if defined(mc68000) || defined(sparc) || defined(u3b2) || \ defined(u3b15) || defined(i386) || defined(amd64) return (XDR_GETINT32(xdrs, (int *)fp)); #else #if defined(vax) vsp = (struct vax_single *)fp; if (!XDR_GETINT32(xdrs, (int32_t *)&is)) return (FALSE); for (i = 0, lim = sgl_limits; i < (int)(sizeof (sgl_limits) / sizeof (struct sgl_limits)); i++, lim++) { if ((is.exp == lim->ieee.exp) && (is.mantissa == lim->ieee.mantissa)) { *vsp = lim->s; goto doneit; } else if ((is.exp == 0) && (lim->ieee.exp == 0)) { /* Special Case */ unsigned tmp = is.mantissa >> 20; if (tmp >= 4) { vsp->exp = 2; } else if (tmp >= 2) { vsp->exp = 1; } else { *vsp = min.s; break; } /* else */ tmp = is.mantissa - (1 << (20 + vsp->exp)); tmp <<= 3 - vsp->exp; vsp->mantissa2 = tmp; vsp->mantissa1 = (tmp >> 16); goto doneit; } vsp->exp = is.exp - IEEE_SNG_BIAS + VAX_SNG_BIAS; vsp->mantissa2 = is.mantissa; vsp->mantissa1 = (is.mantissa >> 16); doneit: vsp->sign = is.sign; return (TRUE); #else { /* * Every machine can do this, its just not very * efficient. It assumes that the decoding machine's * float can represent any value in the range of * ieee largest float = (2 ^ 128) * 0x1.fffff * to * ieee smallest float = (2 ^ -127) * 0x1.00000 * In addtion, some rounding errors may occur do to the * calculations involved. */ float f; int neg = 0; int exp = 0; int32_t val; if (!XDR_GETINT32(xdrs, (int32_t *)&val)) return (FALSE); neg = val & 0x80000000; exp = (val & 0x7f800000) >> 23; exp -= 127; /* subtract exponent base */ f = (val & 0x007fffff) * 0.00000011920928955078125; /* 2 ^ -23 */ f++; while (exp != 0) { if (exp < 0) { f = f/2.0; ++exp; } else { f = f * 2.0; --exp; } } if (neg) f = 0 - f; *fp = f; } return (TRUE); #endif #endif case XDR_FREE: return (TRUE); } return (FALSE); } /* * This routine works on Suns (Sky / 68000's) and Vaxen. */ #if defined(vax) /* What IEEE double precision floating point looks like on a Vax */ struct ieee_double { unsigned int mantissa1 : 20; unsigned int exp : 11; unsigned int sign : 1; unsigned int mantissa2 : 32; }; /* Vax double precision floating point */ struct vax_double { unsigned int mantissa1 : 7; unsigned int exp : 8; unsigned int sign : 1; unsigned int mantissa2 : 16; unsigned int mantissa3 : 16; unsigned int mantissa4 : 16; }; #define VAX_DBL_BIAS 0x81 #define IEEE_DBL_BIAS 0x3ff #define MASK(nbits) ((1 << nbits) - 1) static struct dbl_limits { struct vax_double d; struct ieee_double ieee; } dbl_limits[2] = { {{ 0x7f, 0xff, 0x0, 0xffff, 0xffff, 0xffff }, /* Max Vax */ { 0x0, 0x7ff, 0x0, 0x0 }}, /* Max IEEE */ {{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, /* Min Vax */ { 0x0, 0x0, 0x0, 0x0 }} /* Min IEEE */ }; #endif /* vax */ bool_t xdr_double(XDR *xdrs, double *dp) { int *lp; #if defined(vax) struct ieee_double id; struct vax_double vd; struct dbl_limits *lim; size_t i; #endif switch (xdrs->x_op) { case XDR_ENCODE: #if defined(mc68000) || defined(u3b2) || defined(u3b15) || \ defined(_LONG_LONG_HTOL) lp = (int *)dp; return (XDR_PUTINT32(xdrs, lp++) && XDR_PUTINT32(xdrs, lp)); #else #if defined(_LONG_LONG_LTOH) lp = (int *)dp; lp++; return (XDR_PUTINT32(xdrs, lp--) && XDR_PUTINT32(xdrs, lp)); #else #if defined(vax) vd = *((struct vax_double *)dp); for (i = 0, lim = dbl_limits; i < (int)(sizeof (dbl_limits) / sizeof (struct dbl_limits)); i++, lim++) { if ((vd.mantissa4 == lim->d.mantissa4) && (vd.mantissa3 == lim->d.mantissa3) && (vd.mantissa2 == lim->d.mantissa2) && (vd.mantissa1 == lim->d.mantissa1) && (vd.exp == lim->d.exp)) { id = lim->ieee; goto shipit; } } id.exp = vd.exp - VAX_DBL_BIAS + IEEE_DBL_BIAS; id.mantissa1 = (vd.mantissa1 << 13) | (vd.mantissa2 >> 3); id.mantissa2 = ((vd.mantissa2 & MASK(3)) << 29) | (vd.mantissa3 << 13) | ((vd.mantissa4 >> 3) & MASK(13)); shipit: id.sign = vd.sign; lp = (int32_t *)&id; #else { /* * Every machine can do this, its just not very efficient. * In addtion, some rounding errors may occur do to the * calculations involved. */ double d; int neg = 0; int exp = 0; int32_t val[2]; d = *dp; if (d == 0) { val[0] = 0; val[1] = 0; lp = val; return (XDR_PUTINT32(xdrs, lp++) && XDR_PUTINT32(xdrs, lp)); } if (d < 0) { d = 0 - d; neg = 1; } while (d < 1) { d = d * 2; --exp; } while (d >= 2) { d = d/2; ++exp; } if ((exp > 1024) || (exp < -1023)) { /* over or under flowing ieee exponent */ return (FALSE); } val[0] = neg; val[0] = val[0] << 11; /* for the exponent */ val[0] += 1023 + exp; /* 1023 is the bias */ val[0] = val[0] << 20; /* for the mantissa */ val[0] += (int32_t)((d - 1) * 1048576); /* 2 ^ 20 */ val[1] += (int32_t)((((d - 1) * 1048576) - val[0]) * 4294967296); /* 2 ^ 32 */ lp = val; } #endif return (XDR_PUTINT32(xdrs, lp++) && XDR_PUTINT32(xdrs, lp)); #endif #endif case XDR_DECODE: #if defined(mc68000) || defined(u3b2) || defined(u3b15) || \ defined(_LONG_LONG_HTOL) lp = (int *)dp; return (XDR_GETINT32(xdrs, lp++) && XDR_GETINT32(xdrs, lp)); #else #if defined(_LONG_LONG_LTOH) lp = (int *)dp; lp++; return (XDR_GETINT32(xdrs, lp--) && XDR_GETINT32(xdrs, lp)); #else #if defined(vax) lp = (int32_t *)&id; if (!XDR_GETINT32(xdrs, lp++) || !XDR_GETINT32(xdrs, lp)) return (FALSE); for (i = 0, lim = dbl_limits; i < sizeof (dbl_limits)/sizeof (struct dbl_limits); i++, lim++) { if ((id.mantissa2 == lim->ieee.mantissa2) && (id.mantissa1 == lim->ieee.mantissa1) && (id.exp == lim->ieee.exp)) { vd = lim->d; goto doneit; } } vd.exp = id.exp - IEEE_DBL_BIAS + VAX_DBL_BIAS; vd.mantissa1 = (id.mantissa1 >> 13); vd.mantissa2 = ((id.mantissa1 & MASK(13)) << 3) | (id.mantissa2 >> 29); vd.mantissa3 = (id.mantissa2 >> 13); vd.mantissa4 = (id.mantissa2 << 3); doneit: vd.sign = id.sign; *dp = *((double *)&vd); return (TRUE); #else { /* * Every machine can do this, its just not very * efficient. It assumes that the decoding machine's * double can represent any value in the range of * ieee largest double = (2 ^ 1024) * 0x1.fffffffffffff * to * ieee smallest double = (2 ^ -1023) * 0x1.0000000000000 * In addtion, some rounding errors may occur do to the * calculations involved. */ double d; int neg = 0; int exp = 0; int32_t val[2]; lp = val; if (!XDR_GETINT32(xdrs, lp++) || !XDR_GETINT32(xdrs, lp)) return (FALSE); neg = val[0] & 0x80000000; exp = (val[0] & 0x7ff00000) >> 20; exp -= 1023; /* subtract exponent base */ d = (val[0] & 0x000fffff) * 0.00000095367431640625; /* 2 ^ -20 */ d += (val[1] * 0.0000000000000002220446049250313); /* 2 ^ -52 */ d++; while (exp != 0) { if (exp < 0) { d = d/2.0; ++exp; } else { d = d * 2.0; --exp; } } if (neg) d = 0 - d; *dp = d; } #endif #endif #endif case XDR_FREE: return (TRUE); } return (FALSE); } /* ARGSUSED */ bool_t xdr_quadruple(XDR *xdrs, long double *fp) { /* * The Sparc uses IEEE FP encoding, so just do a byte copy */ #if !defined(sparc) return (FALSE); #else switch (xdrs->x_op) { case XDR_ENCODE: return (XDR_PUTBYTES(xdrs, (char *)fp, sizeof (long double))); case XDR_DECODE: return (XDR_GETBYTES(xdrs, (char *)fp, sizeof (long double))); case XDR_FREE: return (TRUE); } return (FALSE); #endif }