/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _IKEDOOR_H #define _IKEDOOR_H #pragma ident "%Z%%M% %I% %E% SMI" #ifdef __cplusplus extern "C" { #endif #include #include #include #include /* * This version number is intended to stop the calling process from * getting confused if a structure is changed and a mismatch occurs. * This should be incremented each time a structure is changed. */ #define DOORVER 2 #define DOORNM "/var/run/ike_door" typedef enum { IKE_SVC_GET_DBG, IKE_SVC_SET_DBG, IKE_SVC_GET_PRIV, IKE_SVC_SET_PRIV, IKE_SVC_GET_STATS, IKE_SVC_GET_P1, IKE_SVC_DEL_P1, IKE_SVC_DUMP_P1S, IKE_SVC_FLUSH_P1S, IKE_SVC_GET_RULE, IKE_SVC_NEW_RULE, IKE_SVC_DEL_RULE, IKE_SVC_DUMP_RULES, IKE_SVC_READ_RULES, IKE_SVC_WRITE_RULES, IKE_SVC_GET_PS, IKE_SVC_NEW_PS, IKE_SVC_DEL_PS, IKE_SVC_DUMP_PS, IKE_SVC_READ_PS, IKE_SVC_WRITE_PS, IKE_SVC_DBG_RBDUMP, IKE_SVC_GET_DEFS, IKE_SVC_ERROR } ike_svccmd_t; #define IKE_SVC_MAX IKE_SVC_ERROR /* * Support structures/defines */ #define IKEDOORROUNDUP(i) P2ROUNDUP((i), sizeof (uint64_t)) /* * Debug categories. The debug level is a bitmask made up of * flags indicating the desired categories; only 31 bits are * available, as the highest-order bit designates an invalid * setting. */ #define D_INVALID 0x80000000 #define D_CERT 0x00000001 /* certificate management */ #define D_KEY 0x00000002 /* key management */ #define D_OP 0x00000004 /* operational: config, init, mem */ #define D_P1 0x00000008 /* phase 1 negotiation */ #define D_P2 0x00000010 /* phase 2 negotiation */ #define D_PFKEY 0x00000020 /* pf key interface */ #define D_POL 0x00000040 /* policy management */ #define D_PROP 0x00000080 /* proposal construction */ #define D_DOOR 0x00000100 /* door server */ #define D_CONFIG 0x00000200 /* config file processing */ #define D_HIGHBIT 0x00000200 #define D_ALL 0x000003ff /* * Access privilege levels: define level of access to keying information. * The privileges granted at each level is a superset of the privileges * granted at all lower levels. * * The door operations which require special privileges are: * * - receiving keying material for SAs and preshared key entries * IKE_PRIV_KEYMAT must be set for this. * * - get/dump/new/delete/read/write preshared keys * IKE_PRIV_KEYMAT or IKE_PRIV_MODKEYS must be set to do this. * If IKE_PRIV_MODKEYS is set, the information returned for a * get/dump request will not include the actual key; in order * to get the key itself, IKE_PRIV_KEYMAT must be set. * * - modifying the privilege level: the daemon's privilege level * is set when the daemon is started; the level may only be * lowered via the door interface. * * All other operations are allowed at any privilege level. */ #define IKE_PRIV_MINIMUM 0 #define IKE_PRIV_MODKEYS 1 #define IKE_PRIV_KEYMAT 2 #define IKE_PRIV_MAXIMUM 2 /* global ike stats formatting structure */ typedef struct { uint32_t st_init_p1_current; uint32_t st_resp_p1_current; uint32_t st_init_p1_total; uint32_t st_resp_p1_total; uint32_t st_init_p1_attempts; uint32_t st_resp_p1_attempts; uint32_t st_init_p1_noresp; /* failed; no response from peer */ uint32_t st_init_p1_respfail; /* failed, but peer responded */ uint32_t st_resp_p1_fail; uint32_t st_reserved; char st_pkcs11_libname[PATH_MAX]; } ike_stats_t; /* structure used to pass default values used by in.iked back to ikeadm */ typedef struct { uint32_t rule_p1_lifetime_secs; uint32_t rule_p1_minlife; uint32_t rule_p1_nonce_len; uint32_t rule_p2_lifetime_secs; uint32_t rule_p2_softlife_secs; uint32_t sys_p2_lifetime_secs; uint32_t sys_p2_softlife_secs; uint32_t rule_p2_lifetime_kb; uint32_t rule_p2_softlife_kb; uint32_t sys_p2_lifetime_bytes; uint32_t sys_p2_softlife_bytes; uint32_t rule_p2_minlife; uint32_t rule_p2_def_minlife; uint32_t rule_p2_nonce_len; uint32_t rule_p2_pfs; uint32_t rule_p2_minsoft; uint32_t rule_max_certs; uint32_t rule_ike_port; uint32_t rule_natt_port; } ike_defaults_t; /* data formatting structures for P1 SA dumps */ typedef struct { struct sockaddr_storage loc_addr; struct sockaddr_storage rem_addr; #define beg_iprange loc_addr #define end_iprange rem_addr } ike_addr_pr_t; typedef struct { uint64_t cky_i; uint64_t cky_r; } ike_cky_pr_t; typedef struct { ike_cky_pr_t p1hdr_cookies; uint8_t p1hdr_major; uint8_t p1hdr_minor; uint8_t p1hdr_xchg; uint8_t p1hdr_isinit; uint32_t p1hdr_state; } ike_p1_hdr_t; /* values for p1hdr_xchg (aligned with RFC2408, section 3.1) */ #define IKE_XCHG_NONE 0 #define IKE_XCHG_BASE 1 #define IKE_XCHG_IDENTITY_PROTECT 2 #define IKE_XCHG_AUTH_ONLY 3 #define IKE_XCHG_AGGRESSIVE 4 /* following not from RFC; used only for preshared key definitions */ #define IKE_XCHG_IP_AND_AGGR 240 /* also not from RFC; used as wildcard */ #define IKE_XCHG_ANY 256 /* values for p1hdr_state */ #define IKE_SA_STATE_INVALID 0 #define IKE_SA_STATE_INIT 1 #define IKE_SA_STATE_SENT_SA 2 #define IKE_SA_STATE_SENT_KE 3 #define IKE_SA_STATE_SENT_LAST 4 #define IKE_SA_STATE_DONE 5 #define IKE_SA_STATE_DELETED 6 typedef struct { uint16_t p1xf_dh_group; uint16_t p1xf_encr_alg; uint16_t p1xf_encr_low_bits; uint16_t p1xf_encr_high_bits; uint16_t p1xf_auth_alg; uint16_t p1xf_auth_meth; uint16_t p1xf_prf; uint16_t p1xf_pfs; uint32_t p1xf_max_secs; uint32_t p1xf_max_kbytes; uint32_t p1xf_max_keyuses; } ike_p1_xform_t; /* values for p1xf_dh_group (aligned with RFC2409, Appendix A) */ #define IKE_GRP_DESC_MODP_768 1 #define IKE_GRP_DESC_MODP_1024 2 #define IKE_GRP_DESC_EC2N_155 3 #define IKE_GRP_DESC_EC2N_185 4 /* values for p1xf_dh_group (aligned with RFC3526) */ #define IKE_GRP_DESC_MODP_1536 5 #define IKE_GRP_DESC_MODP_2048 14 #define IKE_GRP_DESC_MODP_3072 15 #define IKE_GRP_DESC_MODP_4096 16 #define IKE_GRP_DESC_MODP_6144 17 #define IKE_GRP_DESC_MODP_8192 18 /* values for p1xf_auth_meth (aligned with RFC2409, Appendix A) */ #define IKE_AUTH_METH_PRE_SHARED_KEY 1 #define IKE_AUTH_METH_DSS_SIG 2 #define IKE_AUTH_METH_RSA_SIG 3 #define IKE_AUTH_METH_RSA_ENCR 4 #define IKE_AUTH_METH_RSA_ENCR_REVISED 5 /* values for p1xf_prf */ #define IKE_PRF_NONE 0 #define IKE_PRF_HMAC_MD5 1 #define IKE_PRF_HMAC_SHA1 2 typedef struct { /* * NOTE: the new and del counters count the actual number of SAs, * not the number of "suites", as defined in the ike monitoring * mib draft; we do this because we don't have a good way of * tracking the deletion of entire suites (we're notified of * deleted qm sas individually). */ uint32_t p1stat_new_qm_sas; uint32_t p1stat_del_qm_sas; uint64_t p1stat_start; uint32_t p1stat_kbytes; uint32_t p1stat_keyuses; } ike_p1_stats_t; typedef struct { uint32_t p1err_decrypt; uint32_t p1err_hash; uint32_t p1err_otherrx; uint32_t p1err_tx; } ike_p1_errors_t; typedef struct { uint32_t p1key_type; uint32_t p1key_len; /* * followed by (len - sizeof (ike_p1_key_t)) bytes of hex data, * 64-bit aligned (pad bytes are added at the end, if necessary, * and NOT INCLUDED in the len value, which reflects the actual * key size). */ } ike_p1_key_t; /* key info types for ike_p1_key_t struct */ #define IKE_KEY_PRESHARED 1 #define IKE_KEY_SKEYID 2 #define IKE_KEY_SKEYID_D 3 #define IKE_KEY_SKEYID_A 4 #define IKE_KEY_SKEYID_E 5 #define IKE_KEY_ENCR 6 #define IKE_KEY_IV 7 typedef struct { ike_p1_hdr_t p1sa_hdr; ike_p1_xform_t p1sa_xform; ike_addr_pr_t p1sa_ipaddrs; uint16_t p1sa_stat_off; uint16_t p1sa_stat_len; uint16_t p1sa_error_off; uint16_t p1sa_error_len; uint16_t p1sa_localid_off; uint16_t p1sa_localid_len; uint16_t p1sa_remoteid_off; uint16_t p1sa_remoteid_len; uint16_t p1sa_key_off; uint16_t p1sa_key_len; uint32_t p1sa_reserved; /* * variable-length structures will be included here, as * indicated by offset/length fields. * stats and errors will be formatted as ike_p1_stats_t and * ike_p1_errors_t, respectively. * key info will be formatted as a series of p1_key_t structs. * local/remote ids will be formatted as sadb_ident_t structs. */ } ike_p1_sa_t; #define MAX_LABEL_LEN 256 /* data formatting structure for policy (rule) dumps */ typedef struct { char rule_label[MAX_LABEL_LEN]; uint32_t rule_kmcookie; uint16_t rule_ike_mode; uint16_t rule_local_idtype; /* SADB_IDENTTYPE_* value */ uint32_t rule_p1_nonce_len; uint32_t rule_p2_nonce_len; uint32_t rule_p2_pfs; uint32_t rule_p2_lifetime_secs; uint32_t rule_p2_softlife_secs; uint32_t rule_p2_lifetime_kb; uint32_t rule_p2_softlife_kb; uint16_t rule_xform_cnt; uint16_t rule_xform_off; uint16_t rule_locip_cnt; uint16_t rule_locip_off; uint16_t rule_remip_cnt; uint16_t rule_remip_off; uint16_t rule_locid_inclcnt; uint16_t rule_locid_exclcnt; uint16_t rule_locid_off; uint16_t rule_remid_inclcnt; uint16_t rule_remid_exclcnt; uint16_t rule_remid_off; /* * Followed by several lists of variable-length structures, described * by counts and offsets: * transforms ike_p1_xform_t structs * ranges of local ip addrs ike_addr_pr_t structs * ranges of remote ip addrs ike_addr_pr_t structs * local identification strings null-terminated ascii strings * remote identification strings null-terminated ascii strings */ } ike_rule_t; /* * data formatting structure for preshared keys * ps_ike_mode field uses the IKE_XCHG_* defs */ typedef struct { ike_addr_pr_t ps_ipaddrs; uint16_t ps_ike_mode; uint16_t ps_localid_off; uint16_t ps_localid_len; uint16_t ps_remoteid_off; uint16_t ps_remoteid_len; uint16_t ps_key_off; uint16_t ps_key_len; uint16_t ps_key_bits; /* * followed by variable-length structures, as indicated by * offset/length fields. * key info will be formatted as an array of bytes. * local/remote ids will be formatted as sadb_ident_t structs. */ } ike_ps_t; /* identification types */ #define IKE_ID_IDENT_PAIR 1 #define IKE_ID_ADDR_PAIR 2 #define IKE_ID_CKY_PAIR 3 #define IKE_ID_LABEL 4 /* locations for read/write requests */ #define IKE_RW_LOC_DEFAULT 1 #define IKE_RW_LOC_USER_SPEC 2 /* door interface error codes */ #define IKE_ERR_NO_OBJ 1 /* nothing found to match the request */ #define IKE_ERR_NO_DESC 2 /* fd was required with this request */ #define IKE_ERR_ID_INVALID 3 /* invalid id info was provided */ #define IKE_ERR_LOC_INVALID 4 /* invalid location info was provided */ #define IKE_ERR_CMD_INVALID 5 /* invalid command was provided */ #define IKE_ERR_DATA_INVALID 6 /* invalid data was provided */ #define IKE_ERR_CMD_NOTSUP 7 /* unsupported command */ #define IKE_ERR_REQ_INVALID 8 /* badly formatted request */ #define IKE_ERR_NO_PRIV 9 /* privilege level not high enough */ #define IKE_ERR_SYS_ERR 10 /* syserr occurred while processing */ #define IKE_ERR_DUP_IGNORED 11 /* attempt to add a duplicate entry */ /* * IKE_SVC_GET_DBG * Used to request the current debug level. * * Upon request, dbg_level is 0 (don't care). * * Upon return, dbg_level contains the current value. * * * IKE_SVC_SET_DBG * Used to request modification of the debug level. * * Upon request, dbg_level contains desired level. If debug output is * to be directed to a different file, the fd should be passed in the * door_desc_t field of the door_arg_t param. NOTE: if the daemon is * currently running in the background with no debug set, an output * file MUST be given. * * Upon return, dbg_level contains the old debug level, and acknowledges * successful completion of the request. If an error is encountered, * ike_err_t is returned instead, with appropriate error value and cmd * IKE_SVC_ERROR. */ typedef struct { ike_svccmd_t cmd; uint32_t dbg_level; } ike_dbg_t; /* * IKE_SVC_GET_PRIV * Used to request the current privilege level. * * Upon request, priv_level is 0 (don't care). * * Upon return, priv_level contains the current value. * * * IKE_SVC_SET_PRIV * Used to request modification of the privilege level. * * Upon request, priv_level contains the desired level. The level may * only be lowered via the door interface; it cannot be raised. Thus, * if in.iked is started at the lowest level, it cannot be changed. * * Upon return, priv_level contains the old privilege level, and * acknowledges successful completion of the request. If an error is * encountered, ike_err_t is returned instead, with appropriate error * value and cmd IKE_SVC_ERROR. */ typedef struct { ike_svccmd_t cmd; uint32_t priv_level; } ike_priv_t; /* * IKE_SVC_GET_STATS * Used to request current statistics on Phase 1 SA creation and * failures. The statistics represent all activity in in.iked. * * Upon request, cmd is set, and stat_len does not matter. * * Upon successful return, stat_len contains the total size of the * returned buffer, which contains first the ike_statreq_t struct, * followed by the stat data in the ike_stats_t structure. In case * of an error in processing the request, ike_err_t is returned with * IKE_SVC_ERROR command and appropriate error code. */ typedef struct { ike_svccmd_t cmd; uint32_t stat_len; } ike_statreq_t; /* * IKE_SVC_GET_DEFS * Used to request default values from in.iked. * * Upon request, cmd is set, and stat_len does not matter. * * Upon successful return, stat_len contains the total size of the * returned buffer, this contains a pair of ike_defaults_t's. */ typedef struct { ike_svccmd_t cmd; uint32_t stat_len; uint32_t version; } ike_defreq_t; /* * IKE_SVC_DUMP_{P1S|RULES|PS} * Used to request a table dump, and to return info for a single table * item. The expectation is that all of the table data will be passed * through the door, one entry at a time; an individual request must be * sent for each entry, however (the door server can't send unrequested * data). * * Upon request: cmd is set, and dump_next contains the item number * requested (0 for first request). dump_len is 0; no data follows. * * Upon return: cmd is set, and dump_next contains the item number of * the *next* item in the table (to be used in the subsequent request). * dump_next = 0 indicates that this is the last item in the table. * dump_len is the total length (data + struct) returned. Data is * formatted as indicated by the cmd type: * IKE_SVC_DUMP_P1S: ike_p1_sa_t * IKE_SVC_DUMP_RULES: ike_rule_t * IKE_SVC_DUMP_PS: ike_ps_t */ typedef struct { ike_svccmd_t cmd; uint32_t dump_len; union { struct { uint32_t dump_unext; uint32_t dump_ureserved; } dump_actual; uint64_t dump_alignment; } dump_u; #define dump_next dump_u.dump_actual.dump_unext #define dump_reserved dump_u.dump_actual.dump_ureserved /* dump_len - sizeof (ike_dump_t) bytes of data included here */ } ike_dump_t; /* * IKE_SVC_GET_{P1|RULE|PS} * Used to request and return individual table items. * * Upon request: get_len is the total msg length (struct + id data); * get_idtype indicates the type of identification being used. * IKE_SVC_GET_P1: ike_addr_pr_t or ike_cky_pr_t * IKE_SVC_GET_RULE: char string (label) * IKE_SVC_GET_PS: ike_addr_pr_t or pair of sadb_ident_t * * Upon return: get_len is the total size (struct + data), get_idtype * is unused, and the data that follows is formatted according to cmd: * IKE_SVC_GET_P1: ike_p1_sa_t * IKE_SVC_GET_RULE: ike_rule_t * IKE_SVC_GET_PS: ike_ps_t */ typedef struct { ike_svccmd_t cmd; uint32_t get_len; union { struct { uint32_t getu_idtype; uint32_t getu_reserved; } get_actual; uint64_t get_alignment; } get_u; #define get_idtype get_u.get_actual.getu_idtype #define get_reserved get_u.get_actual.getu_reserved /* get_len - sizeof (ike_get_t) bytes of data included here */ } ike_get_t; /* * IKE_SVC_NEW_{RULE|PS} * Used to request and acknowledge insertion of a table item. * * Upon request: new_len is the total (data + struct) size passed, or 0. * new_len = 0 => a door_desc_t is also included with a file descriptor * for a file containing the data to be added. The file should include * a single item: a rule, or a pre-shared key. For new_len != 0, the * data is formatted according to the cmd type: * IKE_SVC_NEW_RULE: ike_rule_t * IKE_SVC_NEW_PS: ike_ps_t * * Upon return: new_len is 0; simply acknowledges successful insertion * of the requested item. If insertion is not successful, ike_err_t is * returned instead with appropriate error value. */ typedef struct { ike_svccmd_t cmd; uint32_t new_len; /* new_len - sizeof (ike_new_t) bytes included here */ uint64_t new_align; /* Padding for 64-bit alignment. */ } ike_new_t; /* * IKE_SVC_DEL_{P1|RULE|PS} * Used to request and acknowledge the deletion of an individual table * item. * * Upon request: del_len is the total msg length (struct + id data); * del_idtype indicates the type of identification being used. * IKE_SVC_DEL_P1: ike_addr_pr_t or ike_cky_pr_t * IKE_SVC_DEL_RULE: char string (label) * IKE_SVC_DEL_PS: ike_addr_pr_t or pair of sadb_ident_t * * Upon return: acknowledges deletion of the requested item; del_len and * del_idtype are unspecified. If deletion is not successful, ike_err_t * is returned instead with appropriate error value. */ typedef struct { ike_svccmd_t cmd; uint32_t del_len; uint32_t del_idtype; uint32_t del_reserved; /* del_len - sizeof (ike_del_t) bytes of data included here. */ } ike_del_t; /* * IKE_SVC_READ_{RULES|PS} * Used to ask daemon to re-read particular configuration info. * * Upon request: rw_loc indicates where the info should be read from: * either from a user-supplied file descriptor(s), or from the default * location(s). If rw_loc indicates user-supplied location, the file * descriptor(s) should be passed in the door_desc_t struct. For the * IKE_SVC_READ_RULES cmd, two file descriptors should be specified: * first, one for the config file which contains the data to be read, * and second, one for the cookie file which will be written to as * in.iked process the config file. * * Upon return: rw_loc is unspecified; the message simply acknowledges * successful completion of the request. If an error occurred, * ike_err_t is returned instead with appropriate error value. * * * IKE_SVC_WRITE_{RULES|PS} * Used to ask daemon to write its current config info to files. * * Request and return are handled the same as for the IKE_SVC_READ_* * cmds; however, the rw_loc MUST be a user-supplied location. Also, * for the IKE_SVC_WRITE_RULES cmd, the cookie file fd is not required; * only a single fd, for the file to which the config info should be * written, should be passed in. */ typedef struct { ike_svccmd_t cmd; uint32_t rw_loc; } ike_rw_t; /* * IKE_SVC_FLUSH_P1S * Used to request and acknowledge tear-down of all P1 SAs. */ typedef struct { ike_svccmd_t cmd; } ike_flush_t; /* * IKE_SVC_ERROR * Used on return if server encountered an error while processing * the request. An appropriate error code is included (as defined * in this header file); in the case of IKE_ERR_SYS_ERR, a value * from the UNIX errno space is included in the ike_err_unix field. */ typedef struct { ike_svccmd_t cmd; uint32_t ike_err; uint32_t ike_err_unix; uint32_t ike_err_reserved; } ike_err_t; /* * Generic type for use when the request/reply type is unknown */ typedef struct { ike_svccmd_t cmd; } ike_cmd_t; /* * Union containing all possible request/retrun structures. */ typedef union { ike_cmd_t svc_cmd; ike_dbg_t svc_dbg; ike_priv_t svc_priv; ike_statreq_t svc_stats; ike_dump_t svc_dump; ike_get_t svc_get; ike_new_t svc_new; ike_del_t svc_del; ike_rw_t svc_rw; ike_flush_t svc_flush; ike_err_t svc_err; ike_defreq_t svc_defaults; } ike_service_t; #ifdef __cplusplus } #endif #endif /* _IKEDOOR_H */