/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _LIBTOPO_H #define _LIBTOPO_H #include #include #ifdef __cplusplus extern "C" { #endif #define TOPO_VERSION 1 /* Library ABI Interface Version */ typedef struct topo_hdl topo_hdl_t; typedef struct topo_node tnode_t; typedef struct topo_walk topo_walk_t; typedef int32_t topo_instance_t; typedef uint32_t topo_version_t; typedef struct topo_list { struct topo_list *l_prev; struct topo_list *l_next; } topo_list_t; typedef struct topo_faclist { topo_list_t tf_list; tnode_t *tf_node; } topo_faclist_t; /* * The following functions, error codes and data structures are private * to libtopo snapshot consumers and enumerator modules. */ extern topo_hdl_t *topo_open(int, const char *, int *); extern void topo_close(topo_hdl_t *); extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); extern void topo_snap_release(topo_hdl_t *); /* * Snapshot walker support */ typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, void *, int *); extern int topo_walk_step(topo_walk_t *, int); extern void topo_walk_fini(topo_walk_t *); /* * Walk status returned from walker */ #define TOPO_WALK_ERR -1 #define TOPO_WALK_NEXT 0 #define TOPO_WALK_TERMINATE 1 /* * Types of walks: depth-first (child) or breadth-first (sibling) */ #define TOPO_WALK_CHILD 0x0001 #define TOPO_WALK_SIBLING 0x0002 /* * FMRI helper routines */ extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *); extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *); extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, uint32_t, topo_walk_cb_t, void *, int *); /* * Private utility functions for fmd */ extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); /* * Topo node utilities: callable from topo_walk_step() callback or module * enumeration, topo_mod_enumerate() */ extern char *topo_node_name(tnode_t *); extern topo_instance_t topo_node_instance(tnode_t *); extern tnode_t *topo_node_parent(tnode_t *); extern void *topo_node_private(tnode_t *); extern int topo_node_flags(tnode_t *); extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); extern int topo_node_resource(tnode_t *, nvlist_t **, int *); extern int topo_node_label(tnode_t *, char **, int *); extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t); extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, nvlist_t *, nvlist_t **, int *); extern boolean_t topo_method_supported(tnode_t *, const char *, topo_version_t); extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, uint32_t, topo_faclist_t *, int *); /* * Node flags: denotes type of node */ #define TOPO_NODE_DEFAULT 0 #define TOPO_NODE_FACILITY 1 #define TOPO_FAC_TYPE_SENSOR "sensor" #define TOPO_FAC_TYPE_INDICATOR "indicator" /* * Topo property get functions */ extern int topo_prop_get_int32(tnode_t *, const char *, const char *, int32_t *, int *); extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, uint32_t *, int *); extern int topo_prop_get_int64(tnode_t *, const char *, const char *, int64_t *, int *); extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, uint64_t *, int *); extern int topo_prop_get_double(tnode_t *, const char *, const char *, double *, int *); extern int topo_prop_get_string(tnode_t *, const char *, const char *, char **, int *); extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, nvlist_t **, int *); extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, int32_t **, uint_t *, int *); extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, uint32_t **, uint_t *, int *); extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, int64_t **, uint_t *, int *); extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, uint64_t **, uint_t *, int *); extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, char ***, uint_t *, int *); extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, nvlist_t ***, uint_t *, int *); /* * Topo property set functions */ extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, int32_t, int *); extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, uint32_t, int *); extern int topo_prop_set_int64(tnode_t *, const char *, const char *, int, int64_t, int *); extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, int, uint64_t, int *); extern int topo_prop_set_double(tnode_t *, const char *, const char *, int, double, int *); extern int topo_prop_set_string(tnode_t *, const char *, const char *, int, const char *, int *); extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, int, const nvlist_t *, int *); extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, int32_t *, uint_t, int *); extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, int, uint32_t *, uint_t, int *); extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, int, int64_t *, uint_t, int *); extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, int, uint64_t *, uint_t, int *); extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, int, const char **, uint_t, int *); extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, int, const nvlist_t **, uint_t, int *); #define TOPO_PROP_IMMUTABLE 0 #define TOPO_PROP_MUTABLE 0x01 #define TOPO_PROP_NONVOLATILE 0x02 /* Protocol property group and property names */ #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ #define TOPO_PROP_MOD "module" /* software module FMRI */ #define TOPO_PROP_PKG "package" /* software package FMRI */ #define TOPO_PROP_LABEL "label" /* property LABEL */ #define TOPO_METH_FAC_ENUM "fac_enum" /* * System property group */ #define TOPO_PGROUP_SYSTEM "system" #define TOPO_PROP_ISA "isa" #define TOPO_PROP_MACHINE "machine" /* * These enum definitions are used to define a set of error tags associated with * libtopo error conditions occuring during the adminstration of * properties, invocation of methods and fmri-based queries. The shell script * mkerror.sh is used to parse this file and create a corresponding topo_error.c * source file. * * If you do something other than add a new error tag here, you may need to * update the mkerror shell script as it is based upon simple regexps. */ typedef enum topo_prop_errno { ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ ETOPO_PROP_NOENT, /* undefined property or property group */ ETOPO_PROP_DEFD, /* static property already defined */ ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ ETOPO_PROP_TYPE, /* invalid property type */ ETOPO_PROP_NAME, /* invalid property name */ ETOPO_PROP_NOINHERIT, /* can not inherit property */ ETOPO_PROP_NVL, /* malformed property nvlist */ ETOPO_PROP_METHOD, /* get property method failed */ ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ } topo_prop_errno_t; typedef enum topo_method_errno { ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ ETOPO_METHOD_INVAL, /* invalid method registration */ ETOPO_METHOD_NOTSUP, /* method not supported */ ETOPO_METHOD_FAIL, /* method failed */ ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ ETOPO_METHOD_DEFD, /* method op already defined */ ETOPO_METHOD_END /* end of method errno list */ } topo_method_errno_t; typedef enum topo_fmri_errno { ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ ETOPO_FMRI_MALFORM, /* malformed FMRI */ ETOPO_FMRI_NOMEM, /* memory limit exceeded */ ETOPO_FMRI_END /* end of fmri errno list */ } topo_fmri_errno_t; typedef enum topo_hdl_errno { ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ ETOPO_HDL_SNAP, /* snapshot already taken */ ETOPO_HDL_INVAL, /* invalid argument specified */ ETOPO_HDL_UUID, /* uuid already set */ ETOPO_HDL_NOMEM, /* memory limit exceeded */ ETOPO_HDL_END /* end of handle errno list */ } topo_hdl_errno_t; extern const char *topo_strerror(int); extern void topo_hdl_strfree(topo_hdl_t *, char *); extern void topo_debug_set(topo_hdl_t *, const char *, const char *); /* * The following functions and data structures to support property * observability are private to the fmtopo command. */ /* * Each topology node advertises the name and data stability of each of its * modules and properties. (see attributes(5)). */ /* * Topo stability attributes */ typedef enum topo_stability { TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ TOPO_STABILITY_INTERNAL, /* private to libtopo */ TOPO_STABILITY_PRIVATE, /* private to Sun */ TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ TOPO_STABILITY_EVOLVING, /* less rapidly changing */ TOPO_STABILITY_STABLE, /* mature interface from Sun */ TOPO_STABILITY_STANDARD /* industry standard */ } topo_stability_t; #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ typedef struct topo_pgroup_info { const char *tpi_name; /* property group name */ topo_stability_t tpi_namestab; /* stability of group name */ topo_stability_t tpi_datastab; /* stability of all property values */ topo_version_t tpi_version; /* version of pgroup definition */ } topo_pgroup_info_t; extern topo_stability_t topo_name2stability(const char *); extern const char *topo_stability2name(topo_stability_t); extern void topo_pgroup_destroy(tnode_t *, const char *); extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); typedef enum { TOPO_TYPE_INVALID = 0, TOPO_TYPE_BOOLEAN, /* boolean */ TOPO_TYPE_INT32, /* int32_t */ TOPO_TYPE_UINT32, /* uint32_t */ TOPO_TYPE_INT64, /* int64_t */ TOPO_TYPE_UINT64, /* uint64_t */ TOPO_TYPE_STRING, /* const char* */ TOPO_TYPE_TIME, /* uint64_t */ TOPO_TYPE_SIZE, /* uint64_t */ TOPO_TYPE_FMRI, /* nvlist_t */ TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ TOPO_TYPE_STRING_ARRAY, /* array of const char* */ TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ TOPO_TYPE_DOUBLE /* double */ } topo_type_t; extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); extern int topo_prop_getprop(tnode_t *, const char *, const char *, nvlist_t *, nvlist_t **, int *); extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, int, nvlist_t *, int *); extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, const char *, nvlist_t *, nvlist_t **, int *); extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, nvlist_t **, int *); extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, nvlist_t *, int, nvlist_t *, int *); /* Property node NVL names used in topo_prop_getprops */ #define TOPO_PROP_GROUP "property-group" #define TOPO_PROP_GROUP_NAME "property-group-name" #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" #define TOPO_PROP_GROUP_VERSION "property-group-version" #define TOPO_PROP_VAL "property" #define TOPO_PROP_VAL_NAME "property-name" #define TOPO_PROP_VAL_VAL "property-value" #define TOPO_PROP_VAL_TYPE "property-type" #define TOPO_PROP_FLAG "property-flag" /* * ARGS list used in topo property methods */ #define TOPO_PROP_ARGS "args" #define TOPO_PROP_PARGS "private-args" extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); extern void *topo_hdl_alloc(topo_hdl_t *, size_t); extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); extern void topo_hdl_free(topo_hdl_t *, void *, size_t); extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); extern char *topo_hdl_strdup(topo_hdl_t *, const char *); /* * Interfaces for converting sensor/indicator types, units, states, etc to * a string */ void topo_sensor_type_name(uint32_t type, char *buf, size_t len); void topo_sensor_units_name(uint8_t type, char *buf, size_t len); void topo_led_type_name(uint8_t type, char *buf, size_t len); void topo_led_state_name(uint8_t type, char *buf, size_t len); void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, size_t len); /* * Defines for standard properties for sensors and indicators */ #define TOPO_PGROUP_FACILITY "facility" #define TOPO_SENSOR_READING "reading" #define TOPO_SENSOR_STATE "state" #define TOPO_SENSOR_CLASS "sensor-class" #define TOPO_FACILITY_TYPE "type" #define TOPO_SENSOR_UNITS "units" #define TOPO_LED_MODE "mode" /* * Sensor Classes * * The "sensor-class" property in the "facility" propgroup on * facility nodes of type "sensor" should be set to one of these * two values. * * Threshold sensors provide an analog sensor reading via the * "reading" property in the facility propgroup. They will also * provide one or more discrete states via the "state" property * in the facility propgroup. * * Discrete sensors will not provide an analog reading by will * provide one or more discrete states via the "state" property * in the facility propgroup. */ #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" #define TOPO_SENSOR_CLASS_DISCRETE "discrete" /* * Sensor unit types. We're using the unit types and corresponding * codes described in the IPMI 2.0 spec as a reference as it seems to be a * reasonably comprehensive list. This also simplifies the IPMI provider code * since the unit type codes will map exactly to what libtopo uses (so no * conversion necessary). */ typedef enum topo_sensor_unit { TOPO_SENSOR_UNITS_UNSPECIFIED = 0, TOPO_SENSOR_UNITS_DEGREES_C, TOPO_SENSOR_UNITS_DEGREES_F, TOPO_SENSOR_UNITS_DEGREES_K, TOPO_SENSOR_UNITS_VOLTS, TOPO_SENSOR_UNITS_AMPS, TOPO_SENSOR_UNITS_WATTS, TOPO_SENSOR_UNITS_JOULES, TOPO_SENSOR_UNITS_COULOMBS, TOPO_SENSOR_UNITS_VA, TOPO_SENSOR_UNITS_NITS, TOPO_SENSOR_UNITS_LUMEN, TOPO_SENSOR_UNITS_LUX, TOPO_SENSOR_UNITS_CANDELA, TOPO_SENSOR_UNITS_KPA, TOPO_SENSOR_UNITS_PSI, TOPO_SENSOR_UNITS_NEWTON, TOPO_SENSOR_UNITS_CFM, TOPO_SENSOR_UNITS_RPM, TOPO_SENSOR_UNITS_HZ, TOPO_SENSOR_UNITS_MICROSEC, TOPO_SENSOR_UNITS_MILLISEC, TOPO_SENSOR_UNITS_SECS, TOPO_SENSOR_UNITS_MIN, TOPO_SENSOR_UNITS_HOUR, TOPO_SENSOR_UNITS_DAY, TOPO_SENSOR_UNITS_WEEK, TOPO_SENSOR_UNITS_MIL, TOPO_SENSOR_UNITS_INCHES, TOPO_SENSOR_UNITS_FEET, TOPO_SENSOR_UNITS_CUB_INCH, TOPO_SENSOR_UNITS_CUB_FEET, TOPO_SENSOR_UNITS_MM, TOPO_SENSOR_UNITS_CM, TOPO_SENSOR_UNITS_METERS, TOPO_SENSOR_UNITS_CUB_CM, TOPO_SENSOR_UNITS_CUB_METER, TOPO_SENSOR_UNITS_LITERS, TOPO_SENSOR_UNITS_FLUID_OUNCE, TOPO_SENSOR_UNITS_RADIANS, TOPO_SENSOR_UNITS_STERADIANS, TOPO_SENSOR_UNITS_REVOLUTIONS, TOPO_SENSOR_UNITS_CYCLES, TOPO_SENSOR_UNITS_GRAVITIES, TOPO_SENSOR_UNITS_OUNCE, TOPO_SENSOR_UNITS_POUND, TOPO_SENSOR_UNITS_FOOT_POUND, TOPO_SENSOR_UNITS_OZ_INCH, TOPO_SENSOR_UNITS_GAUSS, TOPO_SENSOR_UNITS_GILBERTS, TOPO_SENSOR_UNITS_HENRY, TOPO_SENSOR_UNITS_MILHENRY, TOPO_SENSOR_UNITS_FARAD, TOPO_SENSOR_UNITS_MICROFARAD, TOPO_SENSOR_UNITS_OHMS, TOPO_SENSOR_UNITS_SIEMENS, TOPO_SENSOR_UNITS_MOLE, TOPO_SENSOR_UNITS_BECQUEREL, TOPO_SENSOR_UNITS_PPM, TOPO_SENSOR_UNITS_RESERVED1, TOPO_SENSOR_UNITS_DECIBELS, TOPO_SENSOR_UNITS_DBA, TOPO_SENSOR_UNITS_DBC, TOPO_SENSOR_UNITS_GRAY, TOPO_SENSOR_UNITS_SIEVERT, TOPO_SENSOR_UNITS_COLOR_TEMP_K, TOPO_SENSOR_UNITS_BIT, TOPO_SENSOR_UNITS_KILOBIT, TOPO_SENSOR_UNITS_MEGABIT, TOPO_SENSOR_UNITS_GIGABIT, TOPO_SENSOR_UNITS_BYTE, TOPO_SENSOR_UNITS_KILOBYTE, TOPO_SENSOR_UNITS_MEGABYTE, TOPO_SENSOR_UNITS_GIGABYTE, TOPO_SENSOR_UNITS_WORD, TOPO_SENSOR_UNITS_DWORD, TOPO_SENSOR_UNITS_QWORD, TOPO_SENSOR_UNITS_MEMLINE, TOPO_SENSOR_UNITS_HIT, TOPO_SENSOR_UNITS_MISS, TOPO_SENSOR_UNITS_RETRY, TOPO_SENSOR_UNITS_RESET, TOPO_SENSOR_UNITS_OVERFLOW, TOPO_SENSOR_UNITS_UNDERRUN, TOPO_SENSOR_UNITS_COLLISION, TOPO_SENSOR_UNITS_PACKETS, TOPO_SENSOR_UNITS_MESSAGES, TOPO_SENSOR_UNITS_CHARACTERS, TOPO_SENSOR_UNITS_ERROR, TOPO_SENSOR_UNITS_CE, TOPO_SENSOR_UNITS_UE, TOPO_SENSOR_UNITS_FATAL_ERROR, TOPO_SENSOR_UNITS_GRAMS } topo_sensor_unit_t; /* * These defines are used by the topo_method_sensor_failure to indicate * whether the source of a sensor failure is believed to be the result of an * internal failure, external condition or unknown */ #define TOPO_SENSOR_ERRSRC_UNKNOWN 0 #define TOPO_SENSOR_ERRSRC_INTERNAL 1 #define TOPO_SENSOR_ERRSRC_EXTERNAL 2 /* * Sensor Types amd the associated sensor-type-specific states * * These are used to decode the type and state properties in the facility * propgroup on facility nodes of type sensor. * * Again we're basically using the same defines as for IPMI as it's serves * as a good starting point and simplifies the IPMI provider code. Of course * other facility providers will need to convert from their native codes * to the topo code when they set the type and state properties. */ #define TOPO_SENSOR_TYPE_RESERVED 0x0000 #define TOPO_SENSOR_TYPE_TEMP 0x0001 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 #define TOPO_SENSOR_TYPE_FAN 0x0004 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 #define TOPO_SENSOR_TYPE_COOLING 0x000A #define TOPO_SENSOR_TYPE_OTHER 0x000B #define TOPO_SENSOR_TYPE_MEMORY 0x000C #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 #define TOPO_SENSOR_TYPE_BAY 0x000D #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 #define TOPO_SENSOR_TYPE_MODULE 0x0015 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 #define TOPO_SENSOR_TYPE_CARD 0x0017 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 #define TOPO_SENSOR_TYPE_FRU 0x001A #define TOPO_SENSOR_TYPE_CABLE 0x001B #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 #define TOPO_SENSOR_TYPE_SLOT 0x0021 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 #define TOPO_SENSOR_TYPE_ACPI 0x0022 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 #define TOPO_SENSOR_TYPE_ALERT 0x0024 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 #define TOPO_SENSOR_TYPE_ASIC 0x0026 #define TOPO_SENSOR_TYPE_LAN 0x0027 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 #define TOPO_SENSOR_TYPE_AUDIT 0x002A #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 #define TOPO_SENSOR_TYPE_VERSION 0x002B #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 /* * We simplify the IPMI sensor type code defines by combining the generic * and sensor-specific codes into a single range. Because there's overlap * between the two ranges we offset the generic type codes by 0x0100 * which allows ample room in the hole for future expansion of the table to * accomodate either additions to the IPMI spec or to support new sensor types * for alternate provider modules. */ #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT 0x0001 #define TOPO_SENSOR_STATE_THRESH_LOWER_CRIT 0x0002 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONREC 0x0004 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT 0x0008 #define TOPO_SENSOR_STATE_THRESH_UPPER_CRIT 0x0010 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONREC 0x0020 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B /* * ACPI power state */ #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 /* * These sensor types don't exist in the IPMI spec, but allow consumers to * associate discrete sensors with component failure. The 'ok' sensor is the * inverse of the 'failure' sensor. Note that the values intentionally mimic * TOPO_SENSOR_TYPE_GENERIC_STATE, so that you can use existing IPMI sensors * but just change the type to get semantically meaningful behavior. */ #define TOPO_SENSOR_TYPE_GENERIC_FAILURE 0x010D #define TOPO_SENSOR_STATE_GENERIC_FAIL_DEASSERTED 0x0001 #define TOPO_SENSOR_STATE_GENERIC_FAIL_NONRECOV 0x0002 #define TOPO_SENSOR_STATE_GENERIC_FAIL_CRITICAL 0x0004 #define TOPO_SENSOR_TYPE_GENERIC_OK 0x010E #define TOPO_SENSOR_STATE_GENERIC_OK_DEASSERTED 0x0001 #define TOPO_SENSOR_STATE_GENERIC_OK_ASSERTED 0x0002 /* * Indicator modes and types */ typedef enum topo_led_state { TOPO_LED_STATE_OFF = 0, TOPO_LED_STATE_ON } topo_led_state_t; #define TOPO_FAC_TYPE_ANY 0xFFFFFFFF /* * This list is limited to the set of LED's that we're likely to manage through * FMA. Thus is does not include things like power or activity LED's */ typedef enum topo_led_type { TOPO_LED_TYPE_SERVICE = 0, TOPO_LED_TYPE_LOCATE, TOPO_LED_TYPE_OK2RM, TOPO_LED_TYPE_PRESENT } topo_led_type_t; #ifdef __cplusplus } #endif #endif /* _LIBTOPO_H */