# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2009 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # include ../Makefile.master # Note that libcurses installs commands along with its library. # This is a minor bug which probably should be fixed. # Note also that a few extra libraries are kept in cmd source. # # Certain libraries are linked with, hence depend on, other libraries. # # Although we have historically used .WAIT to express dependencies, it # reduces the amount of parallelism and thus lengthens the time it # takes to build the libraries. Thus, we now require that any new # libraries explicitly call out their dependencies. Eventually, all # the library dependencies will be called out explicitly. See # "Library interdependencies" near the end of this file. # # Aside from explicit dependencies (and legacy .WAITs), all libraries # are built in parallel. # .PARALLEL: # # The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate, # but required due to the "dependencies" of using .WAIT to barrier the # parallel dmake builds. once 4631488 has been fixed, they can be # consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as # shown in HDRSUBDIRS # SUBDIRS= \ common .WAIT \ ../cmd/sgs/libconv \ ../cmd/sgs/libdl .WAIT $(CLOSED_BUILD)SUBDIRS += \ $(CLOSED)/lib/libc_i18n SUBDIRS += \ libc .WAIT \ ../cmd/sgs/libelf .WAIT \ c_synonyms \ libmd \ libmd5 \ librsm \ libmp .WAIT \ libnsl \ libsecdb .WAIT \ librpcsvc \ libsocket .WAIT \ libsctp \ libsip \ libcommputil \ libresolv \ libresolv2 .WAIT \ libw .WAIT \ libintl .WAIT \ ../cmd/sgs/librtld_db \ libaio \ libast \ libdll \ libcmd \ libshell \ libsum \ librt \ libadm \ libctf \ libdtrace \ libdtrace_jni \ libcurses \ libgen \ libgss \ libpam \ libuuid \ libthread \ libpthread .WAIT \ libslp \ libbsdmalloc \ libdoor \ libdevinfo \ libdladm \ libdlpi \ libeti \ libcrypt \ libdns_sd \ libefi \ libfstyp \ libwanboot \ libwanbootutil \ libcryptoutil \ libinetcfg \ libinetutil \ libipmp \ libiscsit \ libiscsitgt \ libkmf \ libkstat \ libkvm \ liblm \ libmalloc \ libmapmalloc \ libmtmalloc \ libnls \ libnwam \ libsmbios \ libtecla \ libumem \ libnvpair .WAIT \ libexacct \ libplot \ libldap4 \ libsasl \ libldap5 \ libsldap .WAIT \ libbsm \ libsys \ libsysevent \ libnisdb \ libpool \ libpp \ libproc \ libproject \ libsendfile \ nametoaddr \ ncad_addr \ hbaapi \ sun_fc \ gss_mechs/mech_krb5 .WAIT \ libkrb5 .WAIT \ krb5 .WAIT \ libsmbfs \ libfcoe \ libstmf \ libnsctl \ libunistat \ libdscfg \ librdc \ libinstzones \ libpkg $(CLOSED_BUILD)SUBDIRS += \ $(CLOSED)/lib/smartcard SUBDIRS += \ passwdutil \ pam_modules \ crypt_modules \ libadt_jni \ abi \ auditd_plugins \ libvolmgt \ libdevice \ libdevid \ libdhcpsvc \ libc_db \ libndmp \ libsec \ libtnfprobe \ libtnf \ libtnfctl \ libdhcpagent \ libdhcpdu \ libdhcputil \ libipsecutil $(CLOSED_BUILD)SUBDIRS += \ $(CLOSED)/lib/libike SUBDIRS += \ nsswitch \ print \ libuutil \ libscf \ libinetsvc \ librestart \ libsched \ libelfsign \ pkcs11 .WAIT \ libpctx .WAIT \ libcpc \ watchmalloc \ extendedFILE \ madv \ mpss \ libdisasm \ libwrap \ libxcurses \ libxcurses2 \ libxnet \ libbrand .WAIT \ libzonecfg \ libzoneinfo \ libtsnet \ libtsol \ gss_mechs/mech_spnego \ gss_mechs/mech_dummy \ gss_mechs/mech_dh \ rpcsec_gss \ libraidcfg .WAIT \ librcm .WAIT \ libcfgadm .WAIT \ libpicl .WAIT \ libpicltree .WAIT \ raidcfg_plugins \ cfgadm_plugins \ libmail \ lvm \ libsmedia \ libipp \ libdiskmgt \ liblgrp \ libfsmgt \ fm \ libavl \ libcmdutils \ libcontract \ ../cmd/sendmail/libmilter \ sasl_plugins \ udapl \ libzpool \ libzfs \ libzfs_jni \ pyzfs \ libmapid \ brand \ policykit \ hal \ libshare \ libsqlite \ libidmap \ libadutils \ libipmi \ libexacct/demo \ libvscan \ libgrubmgmt \ smbsrv \ scsi \ mms \ libima \ libsun_ima \ mpapi \ $($(MACH)_SUBDIRS) i386_SUBDIRS= \ libntfs \ libparted \ libfdisk sparc_SUBDIRS= .WAIT \ efcode \ libc_psr .WAIT \ libds \ libdscp \ libprtdiag .WAIT \ libprtdiag_psr \ libpri \ librsc \ libfruutils .WAIT \ libfru \ storage \ libpcp \ libtsalarm FM_sparc_DEPLIBS= libpri fm: \ libexacct \ libipmi \ libzfs \ scsi \ $(FM_$(MACH)_DEPLIBS) # # Create a special version of $(SUBDIRS) with no .WAIT's, for use with the # clean and clobber targets (for more information, see those targets, below). # NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=) DCSUBDIRS = \ lvm MSGSUBDIRS= \ abi \ auditd_plugins \ brand \ cfgadm_plugins \ gss_mechs/mech_dh \ gss_mechs/mech_krb5 \ krb5 \ libast \ libbsm \ libc \ libcfgadm \ libcmd \ libcontract \ libcurses \ libdhcpsvc \ libdhcputil \ libipsecutil \ libdiskmgt \ libdladm \ libdll \ libgrubmgmt \ libgss \ libidmap \ libinetcfg \ libipmp \ libinetutil \ libinstzones \ libnsl \ libpam \ libpicl \ libpool \ libpkg \ libpp \ libscf \ libsasl \ libldap5 \ libsecdb \ libshare \ libshell \ libsldap \ libslp \ libsmbfs \ libsmedia \ libsum \ libtsol \ libuutil \ libvscan \ libwanboot \ libwanbootutil \ libzfs \ libzonecfg \ lvm \ madv \ mms \ mpss \ pam_modules \ pyzfs \ rpcsec_gss $(CLOSED_BUILD)MSGSUBDIRS += \ $(CLOSED)/lib/smartcard MSGSUBDIRS += \ $($(MACH)_MSGSUBDIRS) sparc_MSGSUBDIRS= \ libprtdiag \ libprtdiag_psr i386_MSGSUBDIRS= libfdisk HDRSUBDIRS= \ auditd_plugins \ libast \ libbrand \ libbsm \ libc \ libcmd \ libcmdutils \ libcontract \ libcpc \ libctf \ libcurses \ libcryptoutil \ libdevice \ libdevid \ libdevinfo \ libdiskmgt \ libdladm \ libdll \ libdlpi \ libdhcpagent \ libdhcpsvc \ libdhcputil \ libdisasm \ libdns_sd \ libdscfg \ libdtrace \ libdtrace_jni \ libelfsign \ libeti \ libfstyp \ libgen \ libwanboot \ libwanbootutil \ libipsecutil \ libinetcfg \ libinetsvc \ libinetutil \ libipmi \ libipmp \ libipp \ libiscsit \ libiscsitgt \ libkstat \ libkvm \ libmail \ libmd \ libmtmalloc \ libndmp \ libnvpair \ libnsctl \ libnsl \ libnwam \ libpam \ libpctx \ libpicl \ libpicltree \ libplot \ libpool \ libpp \ libproc \ libraidcfg \ librcm \ librdc \ libscf \ libsip \ libcommputil \ libsmbios \ librestart \ librpcsvc \ librsm \ libsasl \ libsec \ libshell \ libslp \ libsmedia \ libsqlite \ libfcoe \ libstmf \ libsum \ libsysevent \ libtecla \ libtnf \ libtnfctl \ libtnfprobe \ libtsnet \ libtsol \ libvolmgt \ libumem \ libunistat \ libuutil \ libwrap \ libxcurses2 \ libzfs \ libzfs_jni \ libzoneinfo \ hal \ policykit \ lvm \ pkcs11 \ passwdutil \ ../cmd/sendmail/libmilter \ fm \ udapl \ libmapid \ libkrb5 \ libsmbfs \ libshare \ libidmap \ libvscan \ libgrubmgmt \ smbsrv \ scsi \ hbaapi \ libima \ libsun_ima \ mpapi \ mms \ $($(MACH)_HDRSUBDIRS) $(CLOSED_BUILD)HDRSUBDIRS += \ $(CLOSED)/lib/libc_i18n \ $(CLOSED)/lib/libike \ $(CLOSED)/lib/smartcard i386_HDRSUBDIRS= \ libparted \ libfdisk sparc_HDRSUBDIRS= \ libds \ libdscp \ libpri \ storage all := TARGET= all check := TARGET= check clean := TARGET= clean clobber := TARGET= clobber install := TARGET= install install_h := TARGET= install_h lint := TARGET= lint _dc := TARGET= _dc _msg := TARGET= _msg .KEEP_STATE: # # For the all and install targets, we clearly must respect library # dependencies so that the libraries link correctly. However, for # the remaining targets (check, clean, clobber, install_h, lint, _dc # and _msg), libraries do not have any dependencies on one another # and thus respecting dependencies just slows down the build. # As such, for these rules, we use pattern replacement to explicitly # avoid triggering the dependency information. Note that for clean, # clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than # $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'. # all: $(SUBDIRS) install: $(SUBDIRS) .WAIT install_extra # extra libraries kept in other source areas install_extra: @cd ../cmd/sgs; pwd; $(MAKE) install_lib @pwd clean clobber lint: $(NOWAIT_SUBDIRS:%=%-nodepend) install_h check: $(HDRSUBDIRS:%=%-nodepend) _msg: $(MSGSUBDIRS:%=%-nodepend) .WAIT _dc _dc: $(DCSUBDIRS:%=%-nodepend) # dependencies for pam_modules (see below) $(CLOSED_BUILD)SMARTCARD= $(CLOSED)/lib/smartcard # # Library interdependencies are called out explicitly here # auditd_plugins: libbsm libnsl libsecdb gss_mechs/mech_krb5: libgss libnsl libsocket libresolv pkcs11 libadt_jni: libbsm $(CLOSED_BUILD)libc: $(CLOSED)/lib/libc_i18n libast: libsocket libadutils: libldap5 libresolv libsocket libnsl nsswitch: libadutils libidmap libbsm: libtsol libcmd: libsum libast libsocket libnsl libcmdutils: libavl libcontract: libnvpair libdevid: libdevinfo libdevinfo: libnvpair libsec libdhcpagent: libsocket libdhcputil libuuid libdlpi libcontract libdhcpsvc: libinetutil libdhcputil: libnsl libgen libinetutil libdlpi libdladm: libdevinfo libinetutil libsocket libscf librcm libnvpair \ libexacct libnsl libkstat libcurses libdll: libast libdlpi: libinetutil libdladm libdscfg: libnsctl libunistat libsocket libnsl libdtrace: libproc libgen libctf libdtrace_jni: libuutil libdtrace libefi: libuuid libfstyp: libnvpair libelfsign: libcryptoutil libkmf libidmap: libadutils libldap5 libavl libsldap libinetcfg: libnsl libsocket libdlpi libiscsit: libc libnvpair libstmf libuuid libnsl libkmf: libcryptoutil pkcs11 libnsl: libmd5 libscf libmapid: libresolv libnwam: libdoor librdc: libsocket libnsl libnsctl libunistat libdscfg libuuid: libdlpi libinetutil: libsocket libinstzones: libzonecfg libcontract libpkg: libwanboot libscf libadm libsecdb: libnsl libsasl: libgss libsocket pkcs11 libmd sasl_plugins: pkcs11 libgss libsocket libsasl libsctp: libsocket libshell: libast libcmd libdll libsocket libsecdb libsip: libmd5 libsmbfs: libsocket libnsl libkrb5 libsocket: libnsl libsum: libast libldap5: libsasl libsocket libnsl libmd libsldap: libldap5 libtsol libnsl libc libscf libresolv libpool: libnvpair libexacct libpp: libast libzonecfg: libc libsocket libnsl libuuid libnvpair libsysevent libsec \ libbrand libpool libscf libproc: ../cmd/sgs/librtld_db ../cmd/sgs/libelf libctf libproject: libpool libproc libsecdb libtsnet: libnsl libtsol libsecdb libwrap: libnsl libsocket libwanboot: libnvpair libresolv libnsl libsocket libdevinfo libinetutil \ libdhcputil libwanbootutil: libnsl pam_modules: libproject passwdutil $(SMARTCARD) smbsrv libscf: libuutil libmd libgen libsmbios libinetsvc: libscf librestart: libuutil libscf ../cmd/sgs/libdl: ../cmd/sgs/libconv ../cmd/sgs/libelf: ../cmd/sgs/libconv pkcs11: libcryptoutil print: libldap5 udapl/udapl_tavor: udapl/libdat libzfs: libdevinfo libdevid libgen libnvpair libuutil libiscsitgt \ libavl libefi libidmap libsec libzfs_jni: libdiskmgt libnvpair libzfs libzpool: libavl libumem libnvpair libsec: libavl libidmap brand: libc libsocket libshare: libscf libzfs libuuid libfsmgt libsecdb libumem libsmbfs libexacct/demo: libexacct libproject libsocket libnsl libtsalarm: libpcp smbsrv: libsocket libnsl libmd libxnet libpthread librt \ libshare libidmap pkcs11 libsqlite libvscan: libscf scsi: libnvpair mpapi: libpthread libdevinfo libsysevent libnvpair libgrubmgmt: libdevinfo libzfs libfstyp pyzfs: libnvpair libsec libidmap libzfs # # The reason this rule checks for the existence of the # Makefile is that some of the directories do not exist # in certain situations (e.g., exportable source builds, # OpenSolaris). # $(SUBDIRS): FRC @if [ -f $@/Makefile ]; then \ cd $@; pwd; $(MAKE) $(TARGET); \ else \ true; \ fi $(SUBDIRS:%=%-nodepend): @if [ -f $(@:%-nodepend=%)/Makefile ]; then \ cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \ else \ true; \ fi FRC: