/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * These functions are used to encode SCSI INQUIRY data into * Solaris devid / guid values. */ #include #include #include #include #include #include #include #include "devid_impl.h" #define SCSI_INQUIRY_VID_POS 9 #define SCSI_INQUIRY_VID_SUN "SUN" #define SCSI_INQUIRY_VID_SUN_LEN 3 #define SCSI_INQUIRY_VID_HITACHI "HITACHI" #define SCSI_INQUIRY_VID_HITACHI_LEN 7 #define SCSI_INQUIRY_PID_HITACHI_OPEN "OPEN-" #define SCSI_INQUIRY_PID_HITACHI_OPEN_LEN 5 #define SCSI_INQUIRY_VID_EMC "EMC " #define SCSI_INQUIRY_VID_EMC_LEN 8 #define SCSI_INQUIRY_PID_EMC_SYMMETRIX "SYMMETRIX " #define SCSI_INQUIRY_PID_EMC_SYMMETRIX_LEN 16 #define MSG_NOT_STANDARDS_COMPLIANT "!Page83 data not standards compliant " #define MSG_NOT_STANDARDS_COMPLIANT_SIZE ( \ sizeof (MSG_NOT_STANDARDS_COMPLIANT) + \ sizeof (((struct scsi_inquiry *)NULL)->inq_vid) + \ sizeof (((struct scsi_inquiry *)NULL)->inq_pid) + \ sizeof (((struct scsi_inquiry *)NULL)->inq_revision) + 4) #define IS_DEVID_GUID_TYPE(type) ((type == DEVID_SCSI3_WWN) || \ (IS_DEVID_SCSI3_VPD_TYPE(type))) #define IS_DEVID_SCSI_TYPE(type) ((IS_DEVID_GUID_TYPE(type)) || \ (type == DEVID_SCSI_SERIAL)) /* * The max inquiry page 83 size as expected in the code today * is 0xf0 bytes. Defining a constant to make it easy incase * this needs to be changed at a later time. */ #define SCMD_MAX_INQUIRY_PAGE83_SIZE 0xFF #define SCMD_MIN_INQUIRY_PAGE83_SIZE 0x08 #define SCMD_INQUIRY_PAGE83_HDR_SIZE 4 #define SCSI_INQUIRY_PAGE83_EMC_SYMMETRIX_ID_LEN 16 #define SCMD_MAX_INQUIRY_PAGE80_SIZE 0xFF #define SCMD_MIN_INQUIRY_PAGE80_SIZE 0x04 #define SCMD_MIN_STANDARD_INQUIRY_SIZE 0x04 #define SCMD_INQUIRY_PAGE83_IDENT_DESC_HDR_SIZE 4 #define SCMD_INQUIRY_VPD_TYPE_T10 0x01 #define SCMD_INQUIRY_VPD_TYPE_EUI 0x02 #define SCMD_INQUIRY_VPD_TYPE_NAA 0x03 #define SCMD_INQUIRY_VPD_TYPE_RTP 0x04 #define SCMD_INQUIRY_VPD_TYPE_TPG 0x05 #define SCMD_INQUIRY_VPD_TYPE_LUG 0x06 #define SCMD_INQUIRY_VPD_TYPE_MD5 0x07 #define SCMD_INQUIRY_VPD_TYPE_SSN 0x08 static int is_page83_data_valid(uchar_t *inq83, size_t inq83_len); static int is_page80_data_valid(uchar_t *inq80, size_t inq80_len); static int is_initialized_id(uchar_t *id, size_t id_len); static void encode_scsi3_page83(int version, uchar_t *inq83, size_t inq83_len, uchar_t **id, size_t *id_len, ushort_t *id_type); static void encode_scsi3_page83_emc(int version, uchar_t *inq83, size_t inq83_len, uchar_t **id, size_t *id_len, ushort_t *id_type); static void encode_serialnum(int version, uchar_t *inq, uchar_t *inq80, size_t inq80_len, uchar_t **id, size_t *id_len, ushort_t *id_type); static void encode_sun_serialnum(int version, uchar_t *inq, size_t inq_len, uchar_t **id, size_t *id_len, ushort_t *id_type); static int devid_scsi_init(char *driver_name, uchar_t *raw_id, size_t raw_id_len, ushort_t raw_id_type, ddi_devid_t *ret_devid); /* * Function: ddi_/devid_scsi_encode * * Description: This routine finds and encodes a unique devid * * Arguments: version - id encode algorithm version * driver_name - binding driver name (if ! known use NULL) * inq - standard inquiry buffer * inq_len - standard inquiry buffer length * inq80 - serial number inquiry buffer * inq80_len - serial number inquiry buffer length * inq83 - vpd inquiry buffer * inq83_len - vpd inquiry buffer length * devid - id returned * * Return Code: DEVID_SUCCESS - success * DEVID_FAILURE - failure * DEVID_RETRY - LUN is in a transitional state. A delay should * occur and then this inquiry data should be re-acquired and * this function should be called again. */ int #ifdef _KERNEL ddi_devid_scsi_encode( #else /* ! _KERNEL */ devid_scsi_encode( #endif /* _KERNEL */ int version, /* IN */ char *driver_name, /* IN */ uchar_t *inq, /* IN */ size_t inq_len, /* IN */ uchar_t *inq80, /* IN */ size_t inq80_len, /* IN */ uchar_t *inq83, /* IN */ size_t inq83_len, /* IN */ ddi_devid_t *devid) /* OUT */ { int rval = DEVID_FAILURE; uchar_t *id = NULL; size_t id_len = 0; ushort_t id_type = DEVID_NONE; struct scsi_inquiry *inq_std = (struct scsi_inquiry *)inq; #ifdef _KERNEL char *msg = NULL; #endif /* _KERNEL */ DEVID_ASSERT(devid != NULL); /* verify valid version */ if (version > DEVID_SCSI_ENCODE_VERSION_LATEST) { return (rval); } /* make sure minimum inquiry bytes are available */ if (inq_len < SCMD_MIN_STANDARD_INQUIRY_SIZE) { return (rval); } /* * If 0x83 is availible, that is the best choice. Our next choice is * 0x80. If neither are availible, we leave it to the caller to * determine possible alternate ID, although discouraged. In the * case of the target drivers they create a fabricated id which is * stored in the acyl. The HBA drivers should avoid using an * alternate id. Although has already created a hack of using the * node wwn in some cases. Which needs to be carried forward for * legacy reasons. */ if (inq83 != NULL) { /* * Perform page 83 validation tests and report offenders. * We cannot enforce the page 83 specification because * many Sun partners (ex. HDS) do not conform to the * standards yet. */ if (is_page83_data_valid(inq83, inq83_len) == DEVID_RET_INVALID) { /* * invalid page 83 data. bug 4939576 introduced * handling for EMC non-standard data. */ if ((bcmp(inq_std->inq_vid, SCSI_INQUIRY_VID_EMC, SCSI_INQUIRY_VID_EMC_LEN) == 0) && (bcmp(inq_std->inq_pid, SCSI_INQUIRY_PID_EMC_SYMMETRIX, SCSI_INQUIRY_PID_EMC_SYMMETRIX_LEN) == 0)) { encode_scsi3_page83_emc(version, inq83, inq83_len, &id, &id_len, &id_type); } #ifdef _KERNEL /* * invalid page 83 data. Special hack for HDS * specific device, to suppress the warning msg. */ if ((bcmp(inq_std->inq_vid, SCSI_INQUIRY_VID_HITACHI, SCSI_INQUIRY_VID_HITACHI_LEN) != 0) || (bcmp(inq_std->inq_pid, SCSI_INQUIRY_PID_HITACHI_OPEN, SCSI_INQUIRY_PID_HITACHI_OPEN_LEN) != 0)) { /* * report the page 0x83 standards violation. */ msg = kmem_alloc( MSG_NOT_STANDARDS_COMPLIANT_SIZE, KM_SLEEP); (void) strcpy(msg, MSG_NOT_STANDARDS_COMPLIANT); (void) strncat(msg, inq_std->inq_vid, sizeof (inq_std->inq_vid)); (void) strcat(msg, " "); (void) strncat(msg, inq_std->inq_pid, sizeof (inq_std->inq_pid)); (void) strcat(msg, " "); (void) strncat(msg, inq_std->inq_revision, sizeof (inq_std->inq_revision)); (void) strcat(msg, "\n"); cmn_err(CE_WARN, msg); kmem_free(msg, MSG_NOT_STANDARDS_COMPLIANT_SIZE); } #endif /* _KERNEL */ } if (id_type == DEVID_NONE) { encode_scsi3_page83(version, inq83, inq83_len, &id, &id_len, &id_type); } } /* * If no vpd page is available at this point then we * attempt to use a SCSI serial number from page 0x80. */ if ((id_type == DEVID_NONE) && (inq != NULL) && (inq80 != NULL)) { if (is_page80_data_valid(inq80, inq80_len) == DEVID_RET_VALID) { encode_serialnum(version, inq, inq80, inq80_len, &id, &id_len, &id_type); } } /* * If no vpd page or serial is available at this point and * it's a SUN disk it conforms to the disk qual. 850 specifications * and we can fabricate a serial number id based on the standard * inquiry page. */ if ((id_type == DEVID_NONE) && (inq != NULL)) { encode_sun_serialnum(version, inq, inq_len, &id, &id_len, &id_type); } if (id_type != DEVID_NONE) { if (is_initialized_id(id, id_len) == DEVID_RET_VALID) { rval = devid_scsi_init(driver_name, id, id_len, id_type, devid); } else { rval = DEVID_RETRY; } DEVID_FREE(id, id_len); } return (rval); } /* * Function: is_page83_data_valid * * Description: This routine is used to validate the page 0x83 data * passed in valid based on the standards specification. * * Arguments: inq83 - * inq83_len - * * Return Code: DEVID_RET_VALID * DEVID_RET_INVALID * */ static int is_page83_data_valid(uchar_t *inq83, size_t inq83_len) { int covered_desc_len = 0; int dlen = 0; uchar_t *dblk = NULL; DEVID_ASSERT(inq83 != NULL); /* if not large enough fail */ if (inq83_len < SCMD_MIN_INQUIRY_PAGE83_SIZE) return (DEVID_RET_INVALID); /* * Ensuring that the Peripheral device type(bits 0 - 4) has * the valid settings - the value 0x1f indicates no device type. * Only this value can be validated since all other fields are * either used or reserved. */ if ((inq83[0] & DTYPE_MASK) == DTYPE_UNKNOWN) { /* failed-peripheral devtype */ return (DEVID_RET_INVALID); } /* * Ensure that the page length field - third and 4th bytes * contain a non zero length value. Our implementation * does not seem to expect more that 255 bytes of data... * what is to be done if the reported size is > 255 bytes? * Yes the device will return only 255 bytes as we provide * buffer to house only that much data but the standards * prevent the targets from reporting the truncated size * in this field. * * Currently reporting sizes more than 255 as failure. * */ if ((inq83[2] == 0) && (inq83[3] == 0)) { /* length field is 0! */ return (DEVID_RET_INVALID); } if (inq83[3] > (SCMD_MAX_INQUIRY_PAGE83_SIZE - 3)) { /* length field exceeds expected size of 255 bytes */ return (DEVID_RET_INVALID); } /* * Validation of individual descriptor blocks are done in the * following while loop. It is possible to have multiple * descriptor blocks. * the 'dblk' pointer will be pointing to the start of * each entry of the descriptor block. */ covered_desc_len = 0; dblk = &inq83[4]; /* start of first decriptor blk */ while (covered_desc_len < inq83[3]) { /* * Ensure that the length field is non zero * Further length validations will be done * along with the 'identifier type' as some of * the lengths are dependent on it. */ dlen = dblk[3]; if (dlen == 0) { /* descr length is 0 */ return (DEVID_RET_INVALID); } /* * ensure that the size of the descriptor block does * not claim to be larger than the entire page83 * data that has been received. */ if ((covered_desc_len + dlen) > inq83[3]) { /* failed-descr length */ return (DEVID_RET_INVALID); } /* * The spec says that if the PIV field is 0 OR the * association field contains value other than 1 and 2, * then the protocol identifier field should be ignored. * If association field contains a value of 1 or 2 * and the PIV field is set, then the protocol identifier * field has to be validated. * The protocol identifier values 0 - f are either assigned * or reserved. Nothing to validate here, hence skipping * over to the next check. */ /* * Check for valid code set values. * All possible values are reserved or assigned. Nothing * to validate - skipping over. */ /* * Identifier Type validation * All SPC3rev22 identified types and the expected lengths * are validated. */ switch (dblk[1] & 0x0f) { case SCMD_INQUIRY_VPD_TYPE_T10: /* T10 vendor Id */ /* No specific length validation required */ break; case SCMD_INQUIRY_VPD_TYPE_EUI: /* EUI 64 ID */ /* EUI-64: size is expected to be 8, 12, or 16 bytes */ if ((dlen != 8) && (dlen != 12) && (dlen != 16)) { /* page83 validation failed-EIU64 */ return (DEVID_RET_INVALID); } break; case SCMD_INQUIRY_VPD_TYPE_NAA: /* NAA Id type */ /* * the size for this varies - * IEEE extended/registered is 8 bytes * IEEE Registered extended is 16 bytes */ switch (dblk[4] & 0xf0) { case 0x20: /* IEEE Ext */ case 0x50: /* IEEE Reg */ if (dlen != 8) { /* failed-IEE E/R len */ return (DEVID_RET_INVALID); } /* * the codeSet for this MUST * be set to 1 */ if ((dblk[0] & 0x0f) != 1) { /* * failed-IEEE E/R * codeSet != 1. */ return (DEVID_RET_INVALID); } break; case 0x60: /* IEEE EXT REG */ if (dlen != 16) { /* failed-IEEE ER len */ return (DEVID_RET_INVALID); } /* * the codeSet for this MUST * be set to 1 */ if ((dblk[0] & 0x0f) != 1) { /* * failed-IEEE ER * codeSet != 1. */ return (DEVID_RET_INVALID); } break; default: /* reserved values */ break; } break; case SCMD_INQUIRY_VPD_TYPE_RTP: /* Relative Target port */ if (dlen != 4) { /* failed-Rel target Port length */ return (DEVID_RET_INVALID); } break; case SCMD_INQUIRY_VPD_TYPE_TPG: /* Target port group */ if (dlen != 4) { /* failed-target Port group length */ return (DEVID_RET_INVALID); } break; case SCMD_INQUIRY_VPD_TYPE_LUG: /* Logical unit group */ if (dlen != 4) { /* failed-Logical Unit group length */ return (DEVID_RET_INVALID); } break; case SCMD_INQUIRY_VPD_TYPE_MD5: /* MD5 unit group */ if (dlen != 16) { /* failed-MD5 Unit grp */ return (DEVID_RET_INVALID); } break; default: break; } /* * Now lets advance to the next descriptor block * and validate it. * the descriptor block size is + * is equal to 4 bytes * is available in dlen or dblk[3]. */ dblk = &dblk[4 + dlen]; /* * update the covered_desc_len so that we can ensure that * the 'while' loop terminates. */ covered_desc_len += (dlen + 4); } return (DEVID_RET_VALID); } /* * Function: is_initialized_id * * Description: Routine to ensure that the ID calculated is not a * space or zero filled ID. Returning a space / zero * filled ID when the luns on the target are not fully * initialized is a valid response from the target as * per the T10 spec. When a space/zero filled ID is * found its information needs to be polled again * after sometime time to see if the luns are fully * initialized to return a valid guid information. * * Arguments: id - raw id * id_len - raw id len * * Return Code: DEVID_VALID - indicates a non space/zero filled id * DEVID_INVALID - indicates id contains uninitialized data * and suggests retry of the collection commands. */ static int is_initialized_id(uchar_t *id, size_t id_len) { int idx; if ((id == NULL) || (id_len == 0)) { /* got id length as 0 fetch info again */ return (DEVID_RET_INVALID); } /* First lets check if the guid is filled with spaces */ for (idx = 0; idx < id_len; idx++) { if (id[idx] != ' ') { break; } } /* * Lets exit if we find that it contains ALL spaces * saying that it has an uninitialized guid */ if (idx >= id_len) { /* guid filled with spaces found */ return (DEVID_RET_INVALID); } /* * Since we have found that it is not filled with spaces * now lets ensure that the guid is not filled with only * zeros. */ for (idx = 0; idx < id_len; idx ++) { if (id[idx] != 0) { return (DEVID_RET_VALID); } } /* guid filled with zeros found */ return (DEVID_RET_INVALID); } /* * Function: is_page80_data_valid * * Description: This routine is used to validate the page 0x80 data * passed in valid based on the standards specification. * * Arguments: inq80 - * inq80_len - * * Return Code: DEVID_RET_VALID * DEVID_RET_INVALID * */ /* ARGSUSED */ static int is_page80_data_valid(uchar_t *inq80, size_t inq80_len) { DEVID_ASSERT(inq80); /* if not large enough fail */ if (inq80_len < SCMD_MIN_INQUIRY_PAGE80_SIZE) { return (DEVID_RET_INVALID); } /* * (inq80_len - 4) is the size of the buffer space available * for the product serial number. So inq80[3] (ie. product * serial number) should be <= (inq80_len -4). */ if (inq80[3] > (inq80_len - 4)) { return (DEVID_RET_INVALID); } return (DEVID_RET_VALID); } /* * Function: encode_devid_page * * Description: This routine finds the unique devid if available and * fills the devid and length parameters. * * Arguments: version - encode version * inq83 - driver soft state (unit) structure * inq83_len - length of raw inq83 data * id - raw id * id_len - len of raw id * id_type - type of id * * Note: DEVID_NONE is returned in the id_type field * if no supported page 83 id is found. */ static void encode_scsi3_page83(int version, uchar_t *inq83, size_t inq83_len, uchar_t **id, size_t *id_len, ushort_t *id_type) { size_t descriptor_bytes_left = 0; size_t offset = 0; int idx = 0; size_t offset_id_type[4]; DEVID_ASSERT(inq83 != NULL); /* inq83 length was already validate in is_page83_valid */ DEVID_ASSERT(id != NULL); DEVID_ASSERT(id_len != NULL); DEVID_ASSERT(id_type != NULL); /* preset defaults */ *id = NULL; *id_len = 0; *id_type = DEVID_NONE; /* verify we have enough memory for a ident header */ if (inq83_len < SCMD_INQUIRY_PAGE83_HDR_SIZE) { return; } /* * Attempt to validate the page data. Once validated, we'll walk * the descriptors, looking for certain identifier types that will * mark this device with a unique id/wwn. Note the comment below * for what we really want to receive. */ /* * The format of the inq83 data (Device Identification VPD page) is * a header (containing the total length of the page, from which * descriptor_bytes_left is calculated), followed by a list of * identification descriptors. Each identifcation descriptor has a * header which includes the length of the individual identification * descriptor). * * Set the offset to the beginning byte of the first identification * descriptor. We'll index everything from there. */ offset = SCMD_INQUIRY_PAGE83_HDR_SIZE; descriptor_bytes_left = (size_t)((inq83[2] << 8) | inq83[3]); /* * If the raw data states that the data is larger * than what is actually received abort encode. * Otherwise we will run off into unknown memory * on the decode. */ if ((descriptor_bytes_left + offset) > inq83_len) { return; } /* Zero out our offset array */ bzero(offset_id_type, sizeof (offset_id_type)); /* * According to the scsi spec 8.4.3 SPC-2, there could be several * descriptors associated with each lun. Some we care about and some * we don't. This loop is set up to iterate through the descriptors. * We want the 0x03 case which represents an FC-PH, FC-PH3 or FC-FS * Name_Identifier. The spec mentions nothing about ordering, so we * don't assume any. * * We need to check if we've finished walking the list of descriptors, * we also perform additional checks to be sure the newly calculated * offset is within the bounds of the buffer, and the identifier length * (as calculated by the length field in the header) is valid. This is * done to protect against devices which return bad page83 data. */ while ((descriptor_bytes_left > 0) && (offset_id_type[3] == 0) && (offset + SCMD_INQUIRY_PAGE83_IDENT_DESC_HDR_SIZE <= inq83_len) && (offset + SCMD_INQUIRY_PAGE83_IDENT_DESC_HDR_SIZE + (size_t)inq83[offset + 3] <= inq83_len)) { /* * Inspect the Identification descriptor list. Store the * offsets in the devid page separately for 0x03, 0x01 and * 0x02. Identifiers 0x00 and 0x04 are not useful as they * don't represent unique identifiers for a lun. We also * check the association by masking with 0x3f because we want * an association of 0x0 - indicating the identifier field is * associated with the addressed physical or logical device * and not the port. */ switch ((inq83[offset + 1] & 0x3f)) { case SCMD_INQUIRY_VPD_TYPE_T10: offset_id_type[SCMD_INQUIRY_VPD_TYPE_T10] = offset; break; case SCMD_INQUIRY_VPD_TYPE_EUI: offset_id_type[SCMD_INQUIRY_VPD_TYPE_EUI] = offset; break; case SCMD_INQUIRY_VPD_TYPE_NAA: offset_id_type[SCMD_INQUIRY_VPD_TYPE_NAA] = offset; break; default: /* Devid page undesired id type */ break; } /* * Calculate the descriptor bytes left and move to * the beginning byte of the next id descriptor. */ descriptor_bytes_left -= (size_t)(inq83[offset + 3] + SCMD_INQUIRY_PAGE83_IDENT_DESC_HDR_SIZE); offset += (SCMD_INQUIRY_PAGE83_IDENT_DESC_HDR_SIZE + (size_t)inq83[offset + 3]); } offset = 0; /* * We can't depend on an order from a device by identifier type, but * once we have them, we'll walk them in the same order to prevent a * firmware upgrade from breaking our algorithm. Start with the one * we want the most: id_offset_type[3]. */ for (idx = 3; idx > 0; idx--) { if (offset_id_type[idx] > 0) { offset = offset_id_type[idx]; break; } } /* * We have a valid Device ID page, set the length of the * identifier and copy the value into the wwn. */ if (offset > 0) { *id_len = (size_t)inq83[offset + 3]; if ((*id = DEVID_MALLOC(*id_len)) == NULL) { *id_len = 0; return; } bcopy(&inq83[offset + SCMD_INQUIRY_PAGE83_IDENT_DESC_HDR_SIZE], *id, *id_len); /* set devid type */ switch (version) { /* In version 1 all page 83 types were grouped */ case DEVID_SCSI_ENCODE_VERSION1: *id_type = DEVID_SCSI3_WWN; break; /* In version 2 we break page 83 apart to be unique */ case DEVID_SCSI_ENCODE_VERSION2: switch (idx) { case 3: *id_type = DEVID_SCSI3_VPD_NAA; break; case 2: *id_type = DEVID_SCSI3_VPD_EUI; break; case 1: *id_type = DEVID_SCSI3_VPD_T10; break; default: DEVID_FREE(*id, *id_len); *id_len = 0; break; } break; default: DEVID_FREE(*id, *id_len); *id_len = 0; break; } } } /* * Function: encode_scsi3_page83_emc * * Description: Routine to handle proprietary page 83 of EMC Symmetrix * device. Called by ssfcp_handle_page83() * * Arguments: version - encode version * inq83 - scsi page 83 buffer * inq83_len - scsi page 83 buffer size * id - raw emc id * id_len - len of raw emc id * id_type - type of emc id */ static void encode_scsi3_page83_emc(int version, uchar_t *inq83, size_t inq83_len, uchar_t **id, size_t *id_len, ushort_t *id_type) { uchar_t *guidp = NULL; DEVID_ASSERT(inq83 != NULL); DEVID_ASSERT(id != NULL); DEVID_ASSERT(id_len != NULL); DEVID_ASSERT(id_type != NULL); /* preset defaults */ *id = NULL; *id_len = 0; *id_type = DEVID_NONE; /* The initial devid algorithm didn't use EMC page 83 data */ if (version == DEVID_SCSI_ENCODE_VERSION1) { return; } /* EMC page 83 requires atleast 20 bytes */ if (inq83_len < (SCMD_INQUIRY_PAGE83_HDR_SIZE + SCSI_INQUIRY_PAGE83_EMC_SYMMETRIX_ID_LEN)) { return; } /* * The 4th byte in the page 83 info returned is most likely * indicating the length of the id - which 0x10(16 bytes) * and the 5th byte is indicating that the id is of * IEEE Registered Extended Name format(6). Validate * these code prints before proceeding further as the * following proprietary approach is tied to the specific * device type and incase the EMC firmware changes, we will * have to validate for the changed device before we start * supporting such a device. */ if ((inq83[3] != 0x10) || (inq83[4] != 0x60)) { /* unsupported emc symtx device type */ return; } else { guidp = &inq83[SCMD_INQUIRY_PAGE83_HDR_SIZE]; /* * The GUID returned by the EMC device is * in the IEEE Registered Extended Name format(6) * as a result it is of 16 bytes in length. * An IEEE Registered Name format(5) will be of * 8 bytes which is NOT what is being returned * by the device type for which we are providing * the support. */ *id_len = SCSI_INQUIRY_PAGE83_EMC_SYMMETRIX_ID_LEN; if ((*id = DEVID_MALLOC(*id_len)) == NULL) { *id_len = 0; return; } bcopy(guidp, *id, *id_len); /* emc id matches type 3 */ *id_type = DEVID_SCSI3_VPD_NAA; } } /* * Function: encode_serialnum * * Description: This routine finds the unique devid from the inquiry page * 0x80, serial number page. If available and fills the wwn * and length parameters. * * Arguments: version - encode version * inq - standard inquiry data * inq80 - serial inquiry data * inq80_len - serial inquiry data len * id - raw id * id_len - raw id len * id_type - raw id type */ /* ARGSUSED */ static void encode_serialnum(int version, uchar_t *inq, uchar_t *inq80, size_t inq80_len, uchar_t **id, size_t *id_len, ushort_t *id_type) { struct scsi_inquiry *inq_std = (struct scsi_inquiry *)inq; int idx = 0; DEVID_ASSERT(inq != NULL); DEVID_ASSERT(inq80 != NULL); DEVID_ASSERT(id != NULL); DEVID_ASSERT(id_len != NULL); DEVID_ASSERT(id_type != NULL); /* preset defaults */ *id = NULL; *id_len = 0; *id_type = DEVID_NONE; /* verify inq80 buffer is large enough for a header */ if (inq80_len < SCMD_MIN_INQUIRY_PAGE80_SIZE) { return; } /* * Attempt to validate the page data. Once validated, we'll check * the serial number. */ *id_len = (size_t)inq80[3]; /* Store Product Serial Number length */ /* verify buffer is large enough for serial number */ if (inq80_len < (*id_len + SCMD_MIN_INQUIRY_PAGE80_SIZE)) { return; } /* * Device returns ASCII space (20h) in all the bytes of successful data * transfer, if the product serial number is not available. So we end * up having to check all the bytes for a space until we reach * something else. */ for (idx = 0; idx < *id_len; idx++) { if (inq80[4 + idx] == ' ') { continue; } /* * The serial number is valid, but since this is only vendor * unique, we'll combine the inquiry vid and pid with the * serial number. */ *id_len += sizeof (inq_std->inq_vid); *id_len += sizeof (inq_std->inq_pid); if ((*id = DEVID_MALLOC(*id_len)) == NULL) { *id_len = 0; return; } bcopy(&inq_std->inq_vid, *id, sizeof (inq_std->inq_vid)); bcopy(&inq_std->inq_pid, &(*id)[sizeof (inq_std->inq_vid)], sizeof (inq_std->inq_pid)); bcopy(&inq80[4], &(*id)[sizeof (inq_std->inq_vid) + sizeof (inq_std->inq_pid)], inq80[3]); *id_type = DEVID_SCSI_SERIAL; break; } /* * The spec suggests that the command could succeed but return all * spaces if the product serial number is not available. In this case * we need to fail this routine. To accomplish this, we compare our * length to the serial number length. If they are the same, then we * never copied in the vid and updated the length. That being the case, * we must not have found a valid serial number. */ if (*id_len == (size_t)inq80[3]) { /* empty unit serial number */ if (*id != NULL) { DEVID_FREE(*id, *id_len); } *id = NULL; *id_len = 0; } } /* * Function: encode_sun_serialnum * * Description: This routine finds the unique devid from the inquiry page * 0x80, serial number page. If available and fills the wwn * and length parameters. * * Arguments: version - encode version * inq - standard inquiry data * inq_len - standard inquiry data len * id - raw id * id_len - raw id len * id_type - raw id type * * Return Code: DEVID_SUCCESS * DEVID_FAILURE */ /* ARGSUSED */ static void encode_sun_serialnum(int version, uchar_t *inq, size_t inq_len, uchar_t **id, size_t *id_len, ushort_t *id_type) { struct scsi_inquiry *inq_std = (struct scsi_inquiry *)inq; DEVID_ASSERT(inq != NULL); DEVID_ASSERT(id != NULL); DEVID_ASSERT(id_len != NULL); DEVID_ASSERT(id_type != NULL); /* verify enough buffer is available */ if (inq_len < SCMD_MIN_STANDARD_INQUIRY_SIZE) { return; } /* sun qual drive */ if ((inq_std != NULL) && (bcmp(&inq_std->inq_pid[SCSI_INQUIRY_VID_POS], SCSI_INQUIRY_VID_SUN, SCSI_INQUIRY_VID_SUN_LEN) == 0)) { /* * VPD pages 0x83 and 0x80 are unavailable. This * is a Sun qualified disks as indicated by * "SUN" in bytes 25-27 of the inquiry data * (bytes 9-11 of the pid). Devid's are created * for Sun qualified disks by combining the * vendor id with the product id with the serial * number located in bytes 36-47 of the inquiry data. */ /* get data size */ *id_len = sizeof (inq_std->inq_vid) + sizeof (inq_std->inq_pid) + sizeof (inq_std->inq_serial); if ((*id = DEVID_MALLOC(*id_len)) == NULL) { *id_len = 0; return; } /* copy the vid at the beginning */ bcopy(&inq_std->inq_vid, *id, sizeof (inq_std->inq_vid)); /* copy the pid after the vid */ bcopy(&inq_std->inq_pid, &(*id)[sizeof (inq_std->inq_vid)], sizeof (inq_std->inq_pid)); /* copy the serial number after the vid and pid */ bcopy(&inq_std->inq_serial, &(*id)[sizeof (inq_std->inq_vid) + sizeof (inq_std->inq_pid)], sizeof (inq_std->inq_serial)); /* devid formed from inquiry data */ *id_type = DEVID_SCSI_SERIAL; } } /* * Function: devid_scsi_init * * Description: This routine is used to create a devid for a scsi * devid type. * * Arguments: hint - driver soft state (unit) structure * raw_id - pass by reference variable to hold wwn * raw_id_len - wwn length * raw_id_type - * ret_devid - * * Return Code: DEVID_SUCCESS * DEVID_FAILURE * */ static int devid_scsi_init( char *driver_name, uchar_t *raw_id, size_t raw_id_len, ushort_t raw_id_type, ddi_devid_t *ret_devid) { impl_devid_t *i_devid = NULL; int i_devid_len = 0; int driver_name_len = 0; ushort_t u_raw_id_len = 0; DEVID_ASSERT(raw_id != NULL); DEVID_ASSERT(ret_devid != NULL); if (!IS_DEVID_SCSI_TYPE(raw_id_type)) { *ret_devid = NULL; return (DEVID_FAILURE); } i_devid_len = sizeof (*i_devid) + raw_id_len - sizeof (i_devid->did_id); if ((i_devid = DEVID_MALLOC(i_devid_len)) == NULL) { *ret_devid = NULL; return (DEVID_FAILURE); } i_devid->did_magic_hi = DEVID_MAGIC_MSB; i_devid->did_magic_lo = DEVID_MAGIC_LSB; i_devid->did_rev_hi = DEVID_REV_MSB; i_devid->did_rev_lo = DEVID_REV_LSB; DEVID_FORMTYPE(i_devid, raw_id_type); u_raw_id_len = raw_id_len; DEVID_FORMLEN(i_devid, u_raw_id_len); /* Fill in driver name hint */ if (driver_name != NULL) { driver_name_len = strlen(driver_name); if (driver_name_len > DEVID_HINT_SIZE) { /* Pick up last four characters of driver name */ driver_name += driver_name_len - DEVID_HINT_SIZE; driver_name_len = DEVID_HINT_SIZE; } bcopy(driver_name, i_devid->did_driver, driver_name_len); } else { bzero(i_devid->did_driver, DEVID_HINT_SIZE); } bcopy(raw_id, i_devid->did_id, raw_id_len); /* return device id */ *ret_devid = (ddi_devid_t)i_devid; return (DEVID_SUCCESS); } /* * Function: devid_to_guid * * Description: This routine extracts a guid string form a devid. * The common use of this guid is for a HBA driver * to pass into mdi_pi_alloc(). * * Arguments: devid - devid to extract guid from * * Return Code: guid string - success * NULL - failure */ char * #ifdef _KERNEL ddi_devid_to_guid(ddi_devid_t devid) #else /* !_KERNEL */ devid_to_guid(ddi_devid_t devid) #endif /* _KERNEL */ { impl_devid_t *id = (impl_devid_t *)devid; int len = 0; int idx = 0; int num = 0; char *guid = NULL; char *ptr = NULL; char *dp = NULL; DEVID_ASSERT(devid != NULL); /* NULL devid -> NULL guid */ if (devid == NULL) return (NULL); if (!IS_DEVID_GUID_TYPE(DEVID_GETTYPE(id))) return (NULL); /* guid is always converted to ascii, append NULL */ len = DEVID_GETLEN(id); /* allocate guid string */ if ((guid = DEVID_MALLOC((len * 2) + 1)) == NULL) return (NULL); /* perform encode of id to hex string */ ptr = guid; for (idx = 0, dp = &id->did_id[0]; idx < len; idx++, dp++) { num = ((*dp) >> 4) & 0xF; *ptr++ = (num < 10) ? (num + '0') : (num + ('a' - 10)); num = (*dp) & 0xF; *ptr++ = (num < 10) ? (num + '0') : (num + ('a' - 10)); } *ptr = 0; return (guid); } /* * Function: devid_free_guid * * Description: This routine frees a guid allocated by * devid_to_guid(). * * Arguments: guid - guid to free */ void #ifdef _KERNEL ddi_devid_free_guid(char *guid) #else /* !_KERNEL */ devid_free_guid(char *guid) #endif /* _KERNEL */ { if (guid != NULL) { DEVID_FREE(guid, strlen(guid) + 1); } }