/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * System includes */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * consolidation pkg command library includes */ #include /* * local pkg command library includes */ #include "install.h" #include "libinst.h" #include "libadm.h" #include "messages.h" extern char **environ; static int match_mount; /* This holds the mount of interest. */ int fs_tab_used = 0; int fs_tab_alloc = 0; static int fs_list = -1; struct fstable **fs_tab = NULL; #define PKGDBROOT "/var/sadm" #define MOUNT "/sbin/mount" #define UMOUNT "/sbin/umount" #define setmntent fopen #define endmntent fclose #define MOUNT_TABLE MNTTAB /* returned by already_mounted() */ #define MNT_NOT 0 #define MNT_EXACT 1 #define MNT_AVAIL 2 /* used with is_remote_src() */ #define NOT_REMOTE 0 #define REAL_REMOTE 1 #define SELF_SERVE 2 /* * Due to /etc/mnttab files containing entries for multiple nfs hosts * HOST_NM_LN needs to be accommodating. The recommended value in the sysinfo * man page of 257 needs to be expanded. See bugid 4076513. * 1024 chars is defined in the mnttab.h header as the max size of an entry. */ #define HOST_NM_LN MNT_LINE_MAX /* These cachefs definitions should be in mntent.h. Maybe some day. */ #define MNTTYPE_CFS "cachefs" #define MNTOPT_BACKFSTYPE "backfstype" #define MNTTYPE_AUTO "autofs" /* * Utilities for getting filesystem information from the mount table. * * Note: vanilla SVr4 code (pkginstall/dockspace.c) used the output from * popen() on the "/etc/mount" command. However, we need to get more * information about mounted filesystems, so we use the C interfaces to * the mount table, which also happens to be much faster than running * another process. Since several of the pkg commands need access to the * the code has been placed here, to be included in the libinst library. */ #define ALLOC_CHUNK 30 /* * fs_tab_ent_comp - compare fstable entries first by length in reverse * order, then alphabetically. */ static int fs_tab_ent_comp(const void *e1, const void *e2) { struct fstable *fs1 = *((struct fstable **)e1); struct fstable *fs2 = *((struct fstable **)e2); if (fs1->namlen == fs2->namlen) return (strcmp(fs1->name, fs2->name)); else return (fs2->namlen - fs1->namlen); } /* * This determines if the source of the mount is from another host. If it's * from this host, then it might be writable. This returns NOT_REMOTE if it's * pure local, REAL_REMOTE if it's being served from another host and * SELF_SERVE if it's being served by the current host. */ static int is_remote_src(char *source) { static char host_name[HOST_NM_LN]; char source_host[HOST_NM_LN], *src_ptr, *src_host_ptr; static int hn_len; if (hn_len == 0) { /* Find out what host this is. */ (void) sysinfo(SI_HOSTNAME, host_name, HOST_NM_LN); hn_len = strlen(host_name); } if (source[0] == '/') return (NOT_REMOTE); /* No server name, so it's local. */ if (strchr(source, ':') == NULL) return (NOT_REMOTE); /* it's a floppy disk or something */ src_ptr = source; src_host_ptr = source_host; /* Scan to the end of the hostname (find the ":"). */ while (*src_ptr != ':') *src_host_ptr++ = *src_ptr++; *src_host_ptr = '\0'; if (strncmp(source, host_name, hn_len) == 0 && *(source+hn_len) == ':' || is_local_host(source_host)) return (SELF_SERVE); /* Exporting from itself, it's local. */ return (REAL_REMOTE); } /* * This determines if an apparently writeable filesystem is really writeable * or if it's been shared over the network with root-restrictive options. */ static int really_write(char *mountpt) { char testfile[PATH_MAX]; int fd, retval = 0; struct stat status; (void) snprintf(testfile, sizeof (testfile), "%s/testXXXXXX", mountpt); if (mktemp(testfile) == NULL) return (0); /* may as well be read-only */ /* LINTED do not use creat(); use open(path,... */ else if ((fd = creat(testfile, 0777)) == -1) return (0); /* can't write */ else if (fstat(fd, &status) == -1) retval = 0; /* may as well be read-only */ else if (status.st_uid != 0) retval = 0; /* too many restrictions */ else retval = 1; (void) close(fd); (void) unlink(testfile); return (retval); } /* This returns the hostname portion of a remote path. */ char * get_server_host(short n) { static char hostname[HOST_NM_LN], *host_end; if (fs_tab_used == 0) { return ("unknown source"); } if (n >= 0 && n < fs_tab_used) { (void) strcpy(hostname, fs_tab[n]->remote_name); if ((host_end = strchr(hostname, ':')) == NULL) { if ((strcmp(fs_tab[n]->fstype, MNTTYPE_AUTO)) == NULL) return ("automounter"); else return (fs_tab[n]->fstype); } else { *host_end = '\0'; return (hostname); } } return ("unknown source"); } /* * This pulls the path out of a hostpath which may be of the form host:path * where path is an absolute path. NOTE: If path turns out to be relative, * this returns NULL. */ static char * path_part(char *hostpath) { char *host_end; if ((host_end = strchr(hostpath, ':')) == NULL && hostpath[0] == '/') return (hostpath); /* It's already legit. */ if (*(host_end+1) == '/') return (host_end+1); /* Here's the path part. */ return (NULL); } /* * This scans the filesystems already mounted to see if this remote mount is * already in place on the server. This scans the fs_tab for a remote_name * exactly matching the client's. It stores the current entry number * corresponding to this mount in the static match_mount. * * Returns: * MNT_NOT Couldn't find it. * MNT_EXACT This has actually been manually mounted for us * MNT_AVAIL This is mounted for the server, but needs to be * loopback mounted from the client's perspective. */ static int already_mounted(struct vfstab *vfs, int is_local_host, char *client_path, char *host_path) { int i; match_mount = -1; if (fs_tab_used == 0) { return (MNT_NOT); } for (i = 0; i < fs_tab_used; i++) { /* * Determine if this has been manually mounted exactly as we * require. Begin by finding a mount on our current * mountpoint. */ if (strcmp(fs_tab[i]->name, client_path) == 0) { /* * Now see if it is really the same mount. This isn't * smart enough to find mounts on top of mounts, but * assuming there is no conspiracy to fool this * function, it will be good enough. */ if (is_local_host && strcmp(fs_tab[i]->remote_name, host_path) == 0) { match_mount = i; return (MNT_EXACT); } } /* Determine if this mount is available to the server. */ if (strcmp(fs_tab[i]->remote_name, vfs->vfs_special) == 0) { match_mount = i; return (MNT_AVAIL); } } return (MNT_NOT); } /* * This function unmounts all of the loopback mounts created for the client. * If no client stuff is mounted, this is completely benign, it finds that * nothing is mounted up and returns. It returns "1" for unmounted everything * OK and "0" for failure. */ int unmount_client() { int errcode; int exit_no; int n; int retcode = 1; int status; pid_t pid; pid_t pid_return; if (fs_tab_used == 0) { return (1); } for (n = 0; n < fs_tab_used-1; n++) { /* If the filesystem is mounted and this utility did it ... */ if (fs_tab[n]->cl_mounted && fs_tab[n]->srvr_map) { char *arg[3]; /* create arglist for umount command */ arg[0] = UMOUNT; arg[1] = fs_tab[n]->name; arg[2] = (char *)NULL; /* flush standard i/o before creating new process */ (void) fflush(stderr); (void) fflush(stdout); /* * create new process to execute command in; * vfork is being used to avoid duplicating the parents * memory space - this means that the child process may * not modify any of the parents memory including the * standard i/o descriptors - all the child can do is * adjust interrupts and open files as a prelude to a * call to exec(). */ pid = vfork(); if (pid < 0) { /* fork failed! */ logerr(WRN_BAD_FORK, errno, strerror(errno)); retcode = 0; } else if (pid > 0) { /* * this is the parent process */ status = 0; pid_return = waitpid(pid, &status, 0); if (pid_return != pid) { logerr(WRN_BAD_WAIT, pid, pid_return, (unsigned long)status, errno, strerror(errno)); retcode = 0; } /* * If the child was stopped or killed by a * signal or exied with any code but 0, we * assume the mount has failed. */ if (!WIFEXITED(status) || (errcode = WEXITSTATUS(status))) { retcode = 0; logerr(WRN_FSTAB_UMOUNT, fs_tab[n]->name, errcode); } else { fs_tab[n]->cl_mounted = 0; } } else { /* * this is the child process */ int i; /* reset any signals to default */ for (i = 0; i < NSIG; i++) { (void) sigset(i, SIG_DFL); } /* * Redirect output to /dev/null because the * umount error message may be confusing to * the user. */ i = open("/dev/null", O_WRONLY); if (i >= 0) { dup2(2, STDERR_FILENO); } /* close all file descriptors except stdio */ closefrom(3); exit_no = execve(arg[0], arg, environ); _exit(exit_no); } } } return (retcode); } /* * This function creates the necessary loopback mounts to emulate the client * configuration with respect to the server. If this is being run on a * standalone or the installation is actually to the local system, this call * is benign since srvr_map won't be set anywhere. It returns "1" for mounted * everything OK and "0" for failure. */ int mount_client() { int errcode; int exit_no; int n; int retcode = 1; int status; pid_t pid; pid_t pid_return; if (fs_tab_used == 0) { return (1); } for (n = fs_tab_used-1; n >= 0; n--) { /* * If the filesystem is mounted (meaning available) and the * apparent filesystem can be mapped to a local filesystem * AND the local filesystem is not the same as the target * filesystem, mount it. */ if (fs_tab[n]->mounted && fs_tab[n]->srvr_map) { char *arg[6]; /* create arglist for mount command */ arg[0] = MOUNT; arg[1] = "-F"; arg[2] = "lofs"; arg[3] = fs_tab[n]->remote_name; arg[4] = fs_tab[n]->name; arg[5] = (char *)NULL; /* flush standard i/o before creating new process */ (void) fflush(stderr); (void) fflush(stdout); /* * create new process to execute command in; * vfork is being used to avoid duplicating the parents * memory space - this means that the child process may * not modify any of the parents memory including the * standard i/o descriptors - all the child can do is * adjust interrupts and open files as a prelude to a * call to exec(). */ pid = vfork(); if (pid < 0) { /* fork failed! */ logerr(WRN_BAD_FORK, errno, strerror(errno)); retcode = 0; } else if (pid > 0) { /* * this is the parent process */ pid_return = waitpid(pid, &status, 0); if (pid_return != pid) { logerr(WRN_BAD_WAIT, pid, pid_return, (unsigned long)status, errno, strerror(errno)); retcode = 0; } /* * If the child was stopped or killed by a * signal or exied with any code but 0, we * assume the mount has failed. */ if (!WIFEXITED(status) || (errcode = WEXITSTATUS(status))) { retcode = 0; fs_tab[n]->mnt_failed = 1; logerr(WRN_FSTAB_MOUNT, fs_tab[n]->name, errcode); } else { fs_tab[n]->cl_mounted = 1; } } else { /* * this is the child process */ int i; /* reset all signals to default */ for (i = 0; i < NSIG; i++) { (void) sigset(i, SIG_DFL); } /* * Redirect output to /dev/null because the * mount error message may be confusing to * the user. */ i = open("/dev/null", O_WRONLY); if (i >= 0) { dup2(i, STDERR_FILENO); } /* close all file descriptors except stdio */ closefrom(3); exit_no = execve(arg[0], arg, environ); _exit(exit_no); /*NOTREACHED*/ } } } return (retcode); } /* * This function maps path, on a loopback filesystem, back to the real server * filesystem. fsys_value is the fs_tab[] entry to which the loopback'd path is * mapped. This returns a pointer to a static area. If the result is needed * for further processing, it should be strdup()'d or something. */ char * server_map(char *path, short fsys_value) { static char server_construction[PATH_MAX]; if (fs_tab_used == 0) { (void) strcpy(server_construction, path); } else if (fsys_value >= 0 && fsys_value < fs_tab_used) { (void) snprintf(server_construction, sizeof (server_construction), "%s%s", fs_tab[fsys_value]->remote_name, path+strlen(fs_tab[fsys_value]->name)); } else { (void) strcpy(server_construction, path); } return (server_construction); } /* This function sets up the standard parts of the fs_tab. */ static struct fstable * fs_tab_init(char *mountp, char *fstype) { struct fstable *nfte; /* Create the array if necessary. */ if (fs_list == -1) { fs_list = ar_create(ALLOC_CHUNK, (unsigned)sizeof (struct fstable), "filesystem mount data"); if (fs_list == -1) { progerr(ERR_MALLOC, "fs_list", errno, strerror(errno)); return (NULL); } } /* * Allocate an fstable entry for this mnttab entry. */ if ((nfte = *(struct fstable **)ar_next_avail(fs_list)) == NULL) { progerr(ERR_MALLOC, "nfte", errno, strerror(errno)); return (NULL); } /* * Point fs_tab at the head of the array again, since it may have * moved due to realloc in ar_next_avail(). If ar_next_avail() realizes * that there is no more room to grow the array, it reallocates the * array. Because we stored pointer to that array in fs_tab, we need * to make sure that it is updated as well. */ if ((fs_tab = (struct fstable **)ar_get_head(fs_list)) == NULL) { progerr(ERR_NOTABLE, "mount", MOUNT_TABLE, strerror(errno)); return (NULL); } /* * Get the length of the 'mount point' name. */ nfte->namlen = strlen(mountp); /* * Allocate space for the 'mount point' name. */ if ((nfte->name = malloc(nfte->namlen+1)) == NULL) { progerr(ERR_MALLOC, "name", errno, strerror(errno)); return (NULL); } (void) strcpy(nfte->name, mountp); if ((nfte->fstype = malloc(strlen(fstype)+1)) == NULL) { progerr(ERR_MALLOC, "fstype", errno, strerror(errno)); return (NULL); } (void) strcpy(nfte->fstype, fstype); fs_tab_used++; return (nfte); } /* This function frees all memory associated with the filesystem table. */ void fs_tab_free(void) { int n; if (fs_tab_used == 0) { return; } for (n = 0; n < fs_tab_used; n++) { free(fs_tab[n]->fstype); free(fs_tab[n]->name); free(fs_tab[n]->remote_name); } ar_free(fs_list); } /* This function scans a string of mount options for a specific keyword. */ static int hasopt(char *options, char *keyword) { char vfs_options[VFS_LINE_MAX], *optptr; if (!options) { (void) strcpy(vfs_options, "ro"); } else { (void) strcpy(vfs_options, options); } while (optptr = strrchr(vfs_options, ',')) { *optptr++ = '\0'; if (strcmp(optptr, keyword) == 0) return (1); } /* Now deal with the remainder. */ if (strcmp(vfs_options, keyword) == 0) return (1); return (0); } /* * This function constructs a new filesystem table (fs_tab[]) entry based on * an /etc/mnttab entry. When it returns, the new entry has been inserted * into fs_tab[]. */ static int construct_mt(struct mnttab *mt) { struct fstable *nfte; /* * Initialize fstable structure and make the standard entries. */ if ((nfte = fs_tab_init(mt->mnt_mountp, mt->mnt_fstype)) == NULL) return (1); /* See if this is served from another host. */ if (is_remote_src(mt->mnt_special) == REAL_REMOTE || strcmp(mt->mnt_fstype, MNTTYPE_AUTO) == 0) nfte->remote = 1; else nfte->remote = 0; /* It's mounted now (by definition), so we don't have to remap it. */ nfte->srvr_map = 0; nfte->mounted = 1; nfte->remote_name = strdup(mt->mnt_special); /* * This checks the mount commands which establish the most * basic level of access. Later further tests may be * necessary to fully qualify this. We set this bit * preliminarily because we have access to the mount data * now. */ nfte->writeable = 0; /* Assume read-only. */ if (hasmntopt(mt, MNTOPT_RO) == NULL) { nfte->writeable = 1; if (!(nfte->remote)) /* * There's no network involved, so this * assessment is confirmed. */ nfte->write_tested = 1; } else /* read-only is read-only */ nfte->write_tested = 1; /* Is this coming to us from a server? */ if (nfte->remote && !(nfte->writeable)) nfte->served = 1; return (0); } /* * This function modifies an existing fs_tab[] entry. It was found mounted up * exactly the way we would have mounted it in mount_client() only at the * time we didn't know it was for the client. Now we do, so we're setting the * various permissions to conform to the client view. */ static void mod_existing(struct vfstab *vfsent, int fstab_entry, int is_remote) { /* * Establish whether the client will see this as served. */ if (is_remote && hasopt(vfsent->vfs_mntopts, MNTOPT_RO)) fs_tab[fstab_entry]->served = 1; fs_tab[fstab_entry]->cl_mounted = 1; } /* * This function constructs a new fs_tab[] entry based on * an /etc/vfstab entry. When it returns, the new entry has been inserted * into fstab[]. */ static int construct_vfs(struct vfstab *vfsent, char *client_path, char *link_name, int is_remote, int mnt_stat) { int use_link; struct fstable *nfte; if ((nfte = fs_tab_init(client_path, vfsent->vfs_fstype)) == NULL) return (1); nfte->remote = (is_remote == REAL_REMOTE); /* * The file system mounted on the client may or may not be writeable. * So we hand it over to fsys() to evaluate. This will have the same * read/write attributes as the corresponding mounted filesystem. */ use_link = 0; if (nfte->remote) { /* * Deal here with mount points actually on a system remote * from the server. */ if (mnt_stat == MNT_NOT) { /* * This filesystem isn't in the current mount table * meaning it isn't mounted, the current host can't * write to it and there's no point to mapping it for * the server. */ link_name = NULL; nfte->mounted = 0; nfte->srvr_map = 0; nfte->writeable = 0; } else { /* It's MNT_AVAIL. */ /* * This filesystem is associated with a current * mountpoint. Since it's mounted, it needs to be * remapped and it is writable if the real mounted * filesystem is writeable. */ use_link = 1; link_name = strdup(fs_tab[match_mount]->name); nfte->mounted = 1; nfte->srvr_map = 1; nfte->writeable = fs_tab[match_mount]->writeable; nfte->write_tested = fs_tab[match_mount]->write_tested; } } else { /* local filesystem */ use_link = 1; nfte->mounted = 1; nfte->srvr_map = 1; nfte->writeable = fs_tab[fsys(link_name)]->writeable; nfte->write_tested = 1; } /* * Now we establish whether the client will see this as served. */ if (is_remote && hasopt(vfsent->vfs_mntopts, MNTOPT_RO)) nfte->served = 1; if (use_link) { nfte->remote_name = link_name; } else { nfte->remote_name = strdup(vfsent->vfs_special); } return (0); } /* * get_mntinfo - get the mount table, now dynamically allocated. Returns 0 if * no problem and 1 if there's a fatal error. */ int get_mntinfo(int map_client, char *vfstab_file) { static char *rn = "/"; FILE *pp; struct mnttab mtbuf; struct mnttab *mt = &mtbuf; char *install_root; int is_remote; /* * Open the mount table for the current host and establish a global * table that holds data about current mount status. */ if ((pp = setmntent(MOUNT_TABLE, "r")) == NULL) { progerr(ERR_NOTABLE, "mount", MOUNT_TABLE, strerror(errno)); return (1); } /* * First, review the mounted filesystems on the managing host. This * may also be the target host but we haven't decided that for sure * yet. */ while (!getmntent(pp, mt)) if (construct_mt(mt)) return (1); (void) endmntent(pp); /* * Now, we see if this installation is to a client. If it is, we scan * the client's vfstab to determine what filesystems are * inappropriate to write to. This simply adds the vfstab entries * representing what will be remote file systems for the client. * Everything that isn't remote to the client is already accounted * for in the fs_tab[] so far. If the remote filesystem is really on * this server, we will write through to the server from this client. */ install_root = get_inst_root(); if (install_root && strcmp(install_root, "/") != 0 && map_client) { /* OK, this is a legitimate remote client. */ struct vfstab vfsbuf; struct vfstab *vfs = &vfsbuf; char VFS_TABLE[PATH_MAX]; /* * Since we use the fsys() function later, and it depends on * an ordered list, we have to sort the list here. */ qsort(fs_tab, fs_tab_used, sizeof (struct fstable *), fs_tab_ent_comp); /* * Here's where the vfstab for the target is. If we can get * to it, we'll scan it for what the client will see as * remote filesystems, otherwise, we'll just skip this. */ if (vfstab_file) { (void) snprintf(VFS_TABLE, sizeof (VFS_TABLE), "%s", vfstab_file); } else { (void) snprintf(VFS_TABLE, sizeof (VFS_TABLE), "%s%s", install_root, VFSTAB); } if (access(VFS_TABLE, R_OK) == 0) { char *link_name; /* * Open the vfs table for the target host. */ if ((pp = setmntent(VFS_TABLE, "r")) == NULL) { progerr(ERR_NOTABLE, "vfs", VFS_TABLE, strerror(errno)); return (1); } /* Do this for each entry in the vfstab. */ while (!getvfsent(pp, vfs)) { char client_mountp[PATH_MAX]; int mnt_stat; /* * We put it into the fs table if it's * remote mounted (even from this server) or * loopback mounted from the client's point * of view. */ if (!(is_remote = is_remote_src(vfs->vfs_special)) && strcmp(vfs->vfs_fstype, MNTTYPE_LOFS) != 0) continue; /* not interesting */ /* * Construct client_mountp by prepending the * install_root to the 'mount point' name. */ if (strcmp(vfs->vfs_mountp, "/") == 0) { (void) strcpy(client_mountp, install_root); } else { (void) snprintf(client_mountp, sizeof (client_mountp), "%s%s", install_root, vfs->vfs_mountp); } /* * We also skip the entry if the vfs_special * path and the client_path are the same. * There's no need to mount it, it's just a * cachefs optimization that mounts a * directory over itself from this server. */ if ((is_remote == SELF_SERVE) && strcmp(path_part(vfs->vfs_special), client_mountp) == 0) continue; /* Determine if this is already mounted. */ link_name = strdup(path_part(vfs->vfs_special)); mnt_stat = already_mounted(vfs, (is_remote != REAL_REMOTE), client_mountp, link_name); if (mnt_stat == MNT_EXACT) { mod_existing(vfs, match_mount, is_remote); } else { /* MNT_NOT */ if (construct_vfs(vfs, client_mountp, link_name, is_remote, mnt_stat)) return (1); } } (void) endmntent(pp); } /* end of if(access()) */ } /* end of if(install_root) */ /* This next one may look stupid, but it can really happen. */ if (fs_tab_used <= 0) { progerr(ERR_MNT_NOMOUNTS); return (1); } /* * Now that we have the complete list of mounted (or virtually * mounted) filesystems, we sort the mountpoints in reverse order * based on the length of the 'mount point' name. */ qsort(fs_tab, fs_tab_used, sizeof (struct fstable *), fs_tab_ent_comp); if (strcmp(fs_tab[fs_tab_used-1]->name, rn) != 0) { progerr(ERR_MNT_NOROOT, fs_tab[fs_tab_used-1]->name, rn, errno, strerror(errno)); return (1); } else { return (0); } } /* * This function supports dryrun mode by allowing the filesystem table to be * directly loaded from the continuation file. */ int load_fsentry(struct fstable *fs_entry, char *name, char *fstype, char *remote_name) { struct fstable *nfte; if ((nfte = fs_tab_init(name, fstype)) == NULL) return (1); /* Grab the name and fstype from the new structure. */ fs_entry->name = nfte->name; fs_entry->fstype = nfte->fstype; /* Copy the basic structure into place. */ (void) memcpy(nfte, fs_entry, sizeof (struct fstable)); /* * Allocate space for the 'special' name. */ if ((nfte->remote_name = malloc(strlen(remote_name)+1)) == NULL) { progerr(ERR_MALLOC, "remote_name", errno, strerror(errno)); return (1); } (void) strcpy(nfte->remote_name, remote_name); return (0); } /* * Given a path, return the table index of the filesystem the file apparently * resides on. This doesn't put any time into resolving filesystems that * refer to other filesystems. It just returns the entry containing this * path. */ short fsys(char *path) { register int i; char real_path[PATH_MAX]; char *path2use = NULL; char *cp = NULL; int pathlen; path2use = path; real_path[0] = '\0'; (void) realpath(path, real_path); if (real_path[0]) { cp = strstr(path, real_path); if (cp != path || cp == NULL) path2use = real_path; } pathlen = strlen(path2use); /* * The following algorithm scans the list of attached file systems * for the one containing path. At this point the file names in * fs_tab[] are sorted by decreasing length to facilitate the scan. * The first for() scans past all the file system names too short to * contain path. The second for() does the actual string comparison. * It tests first to assure that the comparison is against a complete * token by assuring that the end of the filesystem name aligns with * the end of a token in path2use (ie: '/' or NULL) then it does a * string compare. -- JST */ if (fs_tab_used == 0) { return (-1); } for (i = 0; i < fs_tab_used; i++) if (fs_tab[i] == NULL) continue; else if (fs_tab[i]->namlen <= pathlen) break; for (; i < fs_tab_used; i++) { int fs_namelen; char term_char; if (fs_tab[i] == NULL) continue; fs_namelen = fs_tab[i]->namlen; term_char = path2use[fs_namelen]; /* * If we're putting the file "/a/kernel" into the filesystem * "/a", then fs_namelen == 2 and term_char == '/'. If, we're * putting "/etc/termcap" into "/", fs_namelen == 1 and * term_char (unfortunately) == 'e'. In the case of * fs_namelen == 1, we check to make sure the filesystem is * "/" and if it is, we have a guaranteed fit, otherwise we * do the string compare. -- JST */ if ((fs_namelen == 1 && *(fs_tab[i]->name) == '/') || ((term_char == '/' || term_char == NULL) && strncmp(fs_tab[i]->name, path2use, fs_namelen) == 0)) return (i); } /* * It only gets here if the root filesystem is fundamentally corrupt. * (This can happen!) */ progerr(ERR_FSYS_FELLOUT, path2use); return (-1); } /* * This function returns the entry in the fs_tab[] corresponding to the * actual filesystem of record. It won't return a loopback filesystem entry, * it will return the filesystem that the loopback filesystem is mounted * over. */ short resolved_fsys(char *path) { int i = -1; char path2use[PATH_MAX]; (void) strcpy(path2use, path); /* If this isn't a "real" filesystem, resolve the map. */ do { (void) strcpy(path2use, server_map(path2use, i)); i = fsys(path2use); } while (fs_tab[i]->srvr_map); return (i); } /* * This function returns the srvr_map status based upon the fs_tab entry * number. This tells us if the server path constructed from the package * install root is really the target filesystem. */ int use_srvr_map_n(short n) { return ((int)fs_tab[n]->srvr_map); } /* * This function returns the mount status based upon the fs_tab entry * number. This tells us if there is any hope of gaining access * to this file system. */ int is_mounted_n(short n) { return ((int)fs_tab[n]->mounted); } /* * is_fs_writeable_n - given an fstab index, return 1 * if it's writeable, 0 if read-only. */ int is_fs_writeable_n(short n) { /* * If the write access permissions haven't been confirmed, do that * now. Note that the only reason we need to do the special check is * in the case of an NFS mount (remote) because we can't determine if * root has access in any other way. */ if (fs_tab[n]->remote && fs_tab[n]->mounted && !fs_tab[n]->write_tested) { if (fs_tab[n]->writeable && !really_write(fs_tab[n]->name)) fs_tab[n]->writeable = 0; /* not really */ fs_tab[n]->write_tested = 1; /* confirmed */ } return ((int)fs_tab[n]->writeable); } /* * is_remote_fs_n - given an fstab index, return 1 * if it's a remote filesystem, 0 if local. * * Note: Upon entry, a valid fsys() is required. */ int is_remote_fs_n(short n) { return ((int)fs_tab[n]->remote); } /* index-driven is_served() */ int is_served_n(short n) { return ((int)fs_tab[n]->served); } /* * This returns the number of blocks available on the indicated filesystem. * * Note: Upon entry, a valid fsys() is required. */ fsblkcnt_t get_blk_free_n(short n) { return (fs_tab[n]->bfree); } /* * This returns the number of blocks being used on the indicated filesystem. * * Note: Upon entry, a valid fsys() is required. */ fsblkcnt_t get_blk_used_n(short n) { return (fs_tab[n]->bused); } /* * This returns the number of inodes available on the indicated filesystem. * * Note: Upon entry, a valid fsys() is required. */ fsblkcnt_t get_inode_free_n(short n) { return (fs_tab[n]->ffree); } /* * This returns the number of inodes being used on the indicated filesystem. * * Note: Upon entry, a valid fsys() is required. */ fsblkcnt_t get_inode_used_n(short n) { return (fs_tab[n]->fused); } /* * Sets the number of blocks being used on the indicated filesystem. * * Note: Upon entry, a valid fsys() is required. */ void set_blk_used_n(short n, fsblkcnt_t value) { fs_tab[n]->bused = value; } /* Get the filesystem block size. */ fsblkcnt_t get_blk_size_n(short n) { return (fs_tab[n]->bsize); } /* Get the filesystem fragment size. */ fsblkcnt_t get_frag_size_n(short n) { return (fs_tab[n]->bsize); } /* * This returns the name of the indicated filesystem. */ char * get_fs_name_n(short n) { if (fs_tab_used == 0) { return (NULL); } else if (n >= fs_tab_used) { return (NULL); } else { return (fs_tab[n]->name); } } /* * This returns the remote name of the indicated filesystem. * * Note: Upon entry, a valid fsys() is required. */ char * get_source_name_n(short n) { return (fs_tab[n]->remote_name); } /* * This function returns the srvr_map status based upon the path. */ int use_srvr_map(char *path, short *fsys_value) { if (*fsys_value == BADFSYS) *fsys_value = fsys(path); return (use_srvr_map_n(*fsys_value)); } /* * This function returns the mount status based upon the path. */ int is_mounted(char *path, short *fsys_value) { if (*fsys_value == BADFSYS) *fsys_value = fsys(path); return (is_mounted_n(*fsys_value)); } /* * is_fs_writeable - given a cfent entry, return 1 * if it's writeable, 0 if read-only. * * Note: Upon exit, a valid fsys() is guaranteed. This is * an interface requirement. */ int is_fs_writeable(char *path, short *fsys_value) { if (*fsys_value == BADFSYS) *fsys_value = fsys(path); return (is_fs_writeable_n(*fsys_value)); } /* * is_remote_fs - given a cfent entry, return 1 * if it's a remote filesystem, 0 if local. * * Also Note: Upon exit, a valid fsys() is guaranteed. This is * an interface requirement. */ int is_remote_fs(char *path, short *fsys_value) { if (*fsys_value == BADFSYS) *fsys_value = fsys(path); return (is_remote_fs_n(*fsys_value)); } /* * This function returns the served status of the filesystem. Served means a * client is getting this file from a server and it is not writeable by the * client. It has nothing to do with whether or not this particular operation * (eg: pkgadd or pkgrm) will be writing to it. */ int is_served(char *path, short *fsys_value) { if (*fsys_value == BADFSYS) *fsys_value = fsys(path); return (is_served_n(*fsys_value)); } /* * get_remote_path - given a filesystem table index, return the * path of the filesystem on the remote system. Otherwise, * return NULL if it's a local filesystem. */ char * get_remote_path(short n) { char *p; if (!is_remote_fs_n(n)) return (NULL); /* local */ p = strchr(fs_tab[n]->remote_name, ':'); if (!p) p = fs_tab[n]->remote_name; /* Loopback */ else p++; /* remote */ return (p); } /* * get_mount_point - given a filesystem table index, return the * path of the mount point. Otherwise, * return NULL if it's a local filesystem. */ char * get_mount_point(short n) { if (!is_remote_fs_n(n)) return (NULL); /* local */ return (fs_tab[n]->name); } struct fstable * get_fs_entry(short n) { if (fs_tab_used == 0) { return (NULL); } else if (n >= fs_tab_used) { return (NULL); } else { return (fs_tab[n]); } }