# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2010 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # @ _START_ # Message file for cmd/sgs/liblddbg. @ MSG_ID_LIBLDDBG # Usage messages @ MSG_USE_UNRECOG "warning: unrecognized debug option (try help): %s" @ MSG_USE_CNTNEGOPT "warning: ignoring non-negatable debug option: %s" @ MSG_USE_HDR_DCT "Display Control Tokens:" @ MSG_USE_HDR_CST "Category Selection Tokens:" @ MSG_USE_HDR_BOTH " [ld and ld.so.1]" @ MSG_USE_HDR_RTLD " [ld.so.1 only]" @ MSG_USE_HDR_LD " [ld only]" # TRANSLATION_NOTE - Use the following output in the C locale as reference 1. # # The runtime linker and link-editor support a shared debugging # facility. Options are selected via a comma separated list of tokens, # each of which specifies a display option or a category for which # information is desired. Many tokens apply to both linker components, # while some are specific to one or the other. Diagnostics are printed, # one per line, with a standard prefix prepended to each one. Diagnostic # output is sent to stderr unless otherwise redirected. # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. @ MSG_USE_R1_A "The runtime linker and link-editor support a \ shared debugging" @ MSG_USE_R1_B "facility. Options are selected via a comma separated list \ of tokens," @ MSG_USE_R1_C "each of which specifies a display option or a category \ for which" @ MSG_USE_R1_D "information is desired. Many tokens apply to both linker \ components," @ MSG_USE_R1_E "while some are specific to one or the other. Diagnostics \ are printed," @ MSG_USE_R1_F "one per line, with a standard prefix prepended to each one. \ Diagnostic" # TRANSLATION_NOTE -- do not translate "stderr" @ MSG_USE_R1_G "output is sent to stderr unless otherwise redirected." # TRANSLATION_NOTE - End of reference 1 # TRANSLATION_NOTE - Use the following output in the C locale as reference 2. # # Runtime Linking (ld.so.1): # Diagnostics that trace the runtime linking of an application # can be enabled via the LD_DEBUG environment variable: # LD_DEBUG=token1,token2 app ... # In addition to the "output" token described below, diagnostic # output from the runtime linker can be redirected to an output # file using the additional environment variable: # LD_DEBUG_OUTPUT=file # If the "output" token and LD_DEBUG_OUTPUT are both specified, # the file specified by LD_DEBUG_OUTPUT is used. If LD_DEBUG_OUTPUT # is used, the output file name is suffixed with the process id. # An output file specified via the "output" token is used as # specified, without a process id suffix. Use of the "output" # token with programs that call fork() results in each process # writing debug output to the same file. The debug output will be # jumbled and incomplete. LD_DEBUG_OUTPUT should be used in such # cases to direct debug output for each process to a unique file. # # All runtime linker diagnostics are prepended with the process # id. If thread capabilities are enabled for the process, the # thread id is also shown. All Solaris applications are thread # capable, and a single threaded application may use threads via # the libraries it links to. Diagnostics from such applications # reference thread id 1. # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. @ MSG_USE_R2_A "Runtime Linking (ld.so.1):" @ MSG_USE_R2_B " Diagnostics that trace the runtime linking \ of an application" # TRANSLATION_NOTE -- do not translate "LD_DEBUG" @ MSG_USE_R2_C " can be enabled via the LD_DEBUG environment variable:" # TRANSLATION_NOTE -- do not translate "LD_DEBUG" @ MSG_USE_R2_D " LD_DEBUG=token1,token2 app ..." # TRANSLATION_NOTE -- do not translate "output" @ MSG_USE_R2_E " In addition to the \"output\" token described \ below, diagnostic" @ MSG_USE_R2_F " output from the runtime linker can be redirected to \ an output" @ MSG_USE_R2_G " file using the additional environment variable:" # TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT" @ MSG_USE_R2_H " LD_DEBUG_OUTPUT=file" # TRANSLATION_NOTE -- do not translate "output" or "LD_DEBUG_OUTPUT" @ MSG_USE_R2_I " If the \"output\" token and LD_DEBUG_OUTPUT are \ both specified," # TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT" @ MSG_USE_R2_J " the file specified by LD_DEBUG_OUTPUT is used. \ If LD_DEBUG_OUTPUT" @ MSG_USE_R2_K " is used, the output file name is suffixed with \ the process id." # TRANSLATION_NOTE -- do not translate "output" @ MSG_USE_R2_L " An output file specified via the \"output\" token \ is used as" # TRANSLATION_NOTE -- do not translate "output" @ MSG_USE_R2_M " specified, without a process id suffix. Use \ of the \"output\"" # TRANSLATION_NOTE -- do not translate "fork" @ MSG_USE_R2_N " token with programs that call fork() results in \ each process" @ MSG_USE_R2_O " writing debug output to the same file. The debug \ output will be" @ MSG_USE_R2_P " jumbled and incomplete. LD_DEBUG_OUTPUT should be \ used in such" @ MSG_USE_R2_Q " cases to direct debug output for each process to \ a unique file." @ MSG_USE_R2_R " All runtime linker diagnostics are prepended with \ the process" @ MSG_USE_R2_S " id. If thread capabilities are enabled for the \ process, the" @ MSG_USE_R2_T " thread id is also shown. All Solaris applications are \ thread" @ MSG_USE_R2_U " capable, and a single threaded application may \ use threads via" @ MSG_USE_R2_V " the libraries it links to. Diagnostics from such \ applications" @ MSG_USE_R2_W " reference thread id 1." # TRANSLATION_NOTE - End of reference 2 # TRANSLATION_NOTE - Use the following output in the C locale as reference 3. # # Link-Editing (ld): # Diagnostics that trace the link-editing of an application are # enabled using the -D option: # ld -Dtoken1,token2 -o prog ... # As compiler drivers may assign -D a different meaning, the # LD_OPTIONS environment variable is often used: # LD_OPTIONS=-Dtoken1,token2 cc -o prog ... # # The position of -D on the link-edit command line is significant. # Diagnostics are enabled when a debug token is first encountered, # and can be switched off by prepending the token with "!". # # Diagnostic output can be directed to a file using the "output" # token, The output file is used as specified, without a process # id suffix. # # All link-editor diagnostics are prepended with the string "debug". # # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. @ MSG_USE_R3_A " Link-Editing (ld):" @ MSG_USE_R3_B " Diagnostics that trace the link-editing of an \ application are" @ MSG_USE_R3_C " enabled using the -D option:" @ MSG_USE_R3_D " ld -Dtoken1,token2 -o prog ..." @ MSG_USE_R3_E " As compiler drivers may assign -D a different meaning, the" # TRANSLATION_NOTE -- do not translate "LD_OPTIONS" @ MSG_USE_R3_F " LD_OPTIONS environment variable is often used:" # TRANSLATION_NOTE -- do not translate "LD_OPTIONS" @ MSG_USE_R3_G " LD_OPTIONS=-Dtoken1,token2 cc -o prog ..." @ MSG_USE_R3_H " The position of -D on the link-edit command line \ is significant." @ MSG_USE_R3_I " Diagnostics are enabled when a debug token is \ first encountered," @ MSG_USE_R3_J " and can be switched off by prepending the token \ with \"!\"." # TRANSLATION_NOTE -- do not translate "output" @ MSG_USE_R3_K " Diagnostic output can be directed to a file using \ the \"output\"" @ MSG_USE_R3_L " token, The output file is used as specified, \ without a process" @ MSG_USE_R3_M " id suffix." # TRANSLATION_NOTE -- do not translate "debug" @ MSG_USE_R3_N " All link-editor diagnostics are prepended with the \ string \"debug\"." # TRANSLATION_NOTE - End of reference 3 # TRANSLATION_NOTE - Use the following output in the C locale as reference 4. # # demangle show C++ symbol names in their demangled form # detail provide more information in conjunction with # other options # dtime prepend a time delta to diagnostics. The value # appears as seconds.fraction, and represents # the elapsed time since that last diagnostic. # long display long object names without truncation # output=file debug output is sent to the named file # instead of stderr. If file is empty (\"\"), # following output will be sent to stderr. # ttime prepend a time stamp to diagnostics. The value # appears as seconds.fraction, and represents # the time since entering ld or ld.so.1. # Note, all diagnostics induce a probe affect, # which should be taken into account when # interpreting dtime and ttime information. # # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. # TRANSLATION_NOTE -- do not translate the first token "demangle". @ MSG_USE_R4_A " demangle show C++ symbol names in their \ demangled form" # TRANSLATION_NOTE -- do not translate the first token "detail". @ MSG_USE_R4_B " detail provide more information in \ conjunction with" @ MSG_USE_R4_B2 " other options" # TRANSLATION_NOTE -- do not translate the first token "dtime". @ MSG_USE_R4_C " dtime prepend a time delta to diagnostics. \ The value" @ MSG_USE_R4_C2 " appears as seconds.fraction, and \ represents" @ MSG_USE_R4_C3 " the elapsed time since that last \ diagnostic." # TRANSLATION_NOTE -- do not translate the first token "long". @ MSG_USE_R4_D " long display long object names without \ truncation" # TRANSLATION_NOTE -- do not translate the first token "output". @ MSG_USE_R4_E " output=file debug output is sent to the \ named file" @ MSG_USE_R4_E2 " instead of stderr. If file is \ empty (\"\")," @ MSG_USE_R4_E3 " following output will be \ sent to stderr." # TRANSLATION_NOTE -- do not translate the first token "ttime". @ MSG_USE_R4_F " ttime prepend a time stamp to diagnostics. \ The value" @ MSG_USE_R4_F2 " appears as seconds.fraction, and \ represents" @ MSG_USE_R4_F3 " the time since entering ld or \ ld.so.1." @ MSG_USE_R4_F4 " Note all diagnostics induce a \ probe affect," @ MSG_USE_R4_F5 " which should be taken into \ account when" @ MSG_USE_R4_F6 " interpreting dtime and ttime \ information." # TRANSLATION_NOTE - End of reference 4 # TRANSLATION_NOTE - Use the following output in the C locale as reference 5. # # lmid[=name] prepend link-map list id to diagnostics, and # optionally filter the lists: By default, # diagnostics are produced for all link-map # lists except that of the runtime linker # (ldso), without identification. "lmid" causes # the link-map list id to be prepended. # "name" limits diagnostics to the named # link-map list. Additional "lmid" tokens # can specify multiple link-map lists. # Valid names are: # all all link-map lists except ldso # alt all alternative link-map lists # alt[0-9]+ specific alternative link-map list # base the base, or main, link-map list # ldso the runtime linker link-map list # # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. # TRANSLATION_NOTE -- do not translate the first token "lmid". @ MSG_USE_R5_A " lmid[=name] prepend link-map list id to \ diagnostics, and" @ MSG_USE_R5_A2 " optionally filter the lists: By \ default," @ MSG_USE_R5_A3 " diagnostics are produced for all \ link-map" @ MSG_USE_R5_A4 " lists except that of the runtime \ linker" @ MSG_USE_R5_A5 " (ldso), without identification. \ \"lmid\" causes" # TRANSLATION_NOTE -- do not translate "name" @ MSG_USE_R5_A6 " the link-map list id to be prepended." @ MSG_USE_R5_A7 " \"name\" limits diagnostics to the \ named" @ MSG_USE_R5_A8 " link-map list. Additional \"lmid\" \ tokens" @ MSG_USE_R5_A9 " can specify multiple link-map \ lists." @ MSG_USE_R5_A0 " Valid names are:" # TRANSLATION_NOTE -- do not translate the token "all". @ MSG_USE_R5_B " all all link-map lists \ except ldso" # TRANSLATION_NOTE -- do not translate the token "alt". @ MSG_USE_R5_C " alt all alternative \ link-map lists" # TRANSLATION_NOTE -- do not translate the token "alt". @ MSG_USE_R5_D " alt[0-9]+ specific alt \ link-map list" # TRANSLATION_NOTE -- do not translate the token "base". @ MSG_USE_R5_E " base base (main) \ link-map list" @ MSG_USE_R5_F " ldso runtime linker \ link-map list " # TRANSLATION_NOTE - End of reference 5 # TRANSLATION_NOTE - Use the following output in the C locale as reference 6. # # name prepend output file basename to diagnostics # fullname prepend full output file name to diagnostics # class prepend output file elfclass (32/64) to # diagnostics # # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. # TRANSLATION_NOTE -- do not translate the first token "name". @ MSG_USE_R6_A " name prepend output file basename \ to diagnostics" # TRANSLATION_NOTE -- do not translate the first token "fullname". @ MSG_USE_R6_B " fullname prepend full output file name \ to diagnostics" # TRANSLATION_NOTE -- do not translate the first token "class". @ MSG_USE_R6_C " class prepend output file elfclass \ (32/64) to" @ MSG_USE_R6_C2 " diagnostics" # TRANSLATION_NOTE - End of reference 6 # TRANSLATION_NOTE - Use the following output in the C locale as reference 7. # # all display information for all categories # basic basic trace information/warnings # cap platform/machine/hardware/software capabilities # files input file processing (files and libraries) # help this help message # libs library search paths; detail flag shows # actual library lookup (-l) processing # move move sections # reloc relocations # symbols symbol tables; detail flag shows internal # symbol table addition and resolution (ld only) # tls thread local storage (TLS) # unused unused/unreferenced files; detail flag # shows unused sections (ld only) # versions ELF versioning # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. # TRANSLATION_NOTE -- do not translate the first token "all". @ MSG_USE_R7_A " all display information for \ all categories" # TRANSLATION_NOTE -- do not translate the first token "basic". @ MSG_USE_R7_B " basic basic trace information/warnings" # TRANSLATION_NOTE -- do not translate the first token "cap". @ MSG_USE_R7_C " cap platform/machine/hardware/software \ capabilities" # TRANSLATION_NOTE -- do not translate the first token "files". @ MSG_USE_R7_D " files input file processing (files \ and libraries)" # TRANSLATION_NOTE -- do not translate the first token "help". @ MSG_USE_R7_E " help this help message" # TRANSLATION_NOTE -- do not translate the first token "libs". @ MSG_USE_R7_F " libs library search paths; detail \ flag shows" @ MSG_USE_R7_F2 " actual library lookup (-l) \ processing" # TRANSLATION_NOTE -- do not translate the first token "move". @ MSG_USE_R7_G " move move sections" # TRANSLATION_NOTE -- do not translate the first token "reloc". @ MSG_USE_R7_H " reloc relocations" # TRANSLATION_NOTE -- do not translate the first token "symbols". @ MSG_USE_R7_I " symbols symbol tables; detail flag shows \ internal" @ MSG_USE_R7_I2 " symbol table addition/resolution \ (ld only)" # TRANSLATION_NOTE -- do not translate the first token "tls". @ MSG_USE_R7_J " tls thread local storage (TLS)" # TRANSLATION_NOTE -- do not translate the first token "unused". @ MSG_USE_R7_K " unused unused/unreferenced files; \ detail flag" @ MSG_USE_R7_K2 " shows unused sections (ld only)" # TRANSLATION_NOTE -- do not translate the first token "versions". @ MSG_USE_R7_L " versions ELF versioning" # TRANSLATION_NOTE - End of reference 7 # TRANSLATION_NOTE - Use the following output in the C locale as reference 8. # # audit runtime link-audit processing # bindings symbol binding; detail flag shows # absolute:relative addresses # callback user supplied code executed by ld.so.1 # (i.e. dl_iterate_phdr) # init init and fini processing # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. # TRANSLATION_NOTE -- do not translate the first token "audit". @ MSG_USE_R8_A " audit runtime link-audit processing" # TRANSLATION_NOTE -- do not translate the first token "bindings". @ MSG_USE_R8_B " bindings symbol binding; detail flag shows" @ MSG_USE_R8_B2 " absolute:relative addresses" # TRANSLATION_NOTE -- do not translate the first token "init". @ MSG_USE_R8_C " callback user supplied code executed by ld.so.1" @ MSG_USE_R8_C2 " (i.e. dl_iterate_phdr)" # TRANSLATION_NOTE -- do not translate the first token "init". @ MSG_USE_R8_D " init init and fini processing" # TRANSLATION_NOTE - End of reference 8 # TRANSLATION_NOTE - Use the following output in the C locale as reference 9. # # args input arguments # entry entrance criteria descriptors # got GOT symbol information # map mapfile processing # sections input sections # segments output segments and address/offset processing; # detail flag shows associated sections # statistics symbol table and relocation statistics # strtab string table compression statistics; # detail flag shows layout of string tables # support support libraries # TRANSLATION_NOTE - The next series of messages makes the above output in C # locale. # TRANSLATION_NOTE -- do not translate the first token "args". @ MSG_USE_R9_A " args input arguments" # TRANSLATION_NOTE -- do not translate the first token "entry". @ MSG_USE_R9_B " entry entrance criteria descriptors" # TRANSLATION_NOTE -- do not translate the first token "got". @ MSG_USE_R9_C " got GOT symbol information" # TRANSLATION_NOTE -- do not translate the first token "map". @ MSG_USE_R9_D " map mapfile processing" # TRANSLATION_NOTE -- do not translate the first token "sections". @ MSG_USE_R9_E " sections input sections" # TRANSLATION_NOTE -- do not translate the first token "segments". @ MSG_USE_R9_F " segments output segments and address/offset \ processing;" @ MSG_USE_R9_F2 " detail flag shows associated \ sections" # TRANSLATION_NOTE -- do not translate the first token "statistics". @ MSG_USE_R9_G " statistics symbol table and relocation \ statistics" # TRANSLATION_NOTE -- do not translate the first token "strtab". @ MSG_USE_R9_H " strtab string table compression statistics;" @ MSG_USE_R9_H2 " detail flag shows layout of \ string tables" # TRANSLATION_NOTE -- do not translate the first token "support". @ MSG_USE_R9_I " support support libraries" # TRANSLATION_NOTE - End of reference 9 # Basic processing (ld). @ MSG_BASIC_COLLECT "collect relocations" @ MSG_BASIC_CREATE "create output image" @ MSG_BASIC_FILES "process files" @ MSG_BASIC_FINISHED "processing finished" @ MSG_BASIC_OPTIONS "process options" @ MSG_BASIC_RELOCATE "relocate output image" @ MSG_BASIC_VALIDATE "validating symbols" # Argument messages @ MSG_ARG_OPTION "arg[%d]\toption=-%c" @ MSG_ARG_OPTARG "arg[%d]\toption=-%c: option-argument: %s" @ MSG_ARG_STR2CHR "arg[%d]\toption=-%s: translated: new option=-%c" @ MSG_ARG_WLDEL "arg[%d]\toption=-W%s: translated: prefix -Wl,: \ removed" @ MSG_ARG_FILE "arg[%d]\tfile=%s" # Bindings messages # NOTE: these are used by appcert(1) and lari(1), use care when changing. @ MSG_BND_BASIC "binding file=%s to file=%s: symbol '%s'" @ MSG_BND_PLT "binding file=%s (%#llx:%#llx) at plt[%lld]:%s to \ file=%s (%#llx:%#llx): symbol '%s'%s" @ MSG_BND_DLSYM "binding file=%s (dlsym) to file=%s \ (%#llx:%#llx): symbol '%s'%s" @ MSG_BND_DEFAULT "binding file=%s (%#llx:%#llx) to file=%s \ (%#llx:%#llx): symbol '%s'%s" @ MSG_BND_WEAK_1 "binding file=%s to 0x0 (undefined weak): symbol '%s'" @ MSG_BND_WEAK_2 "binding file=%s (%#llx:%#llx) to 0x0 \ (undefined weak): symbol '%s'" # NOTE: the rejected message is used by lari(1), use care when changing. This # message is formatted to conform to the pattern used by the MSG_BINFO messages. @ MSG_BND_REJECT "binding file=%s to file=%s: symbol '%s' \ (rejected: %s)" @ MSG_BNDREJ_DIRECT "attempt to directly bind to a NODIRECT definition" @ MSG_BNDREJ_GROUP "attempt to bind within a group to a NODIRECT \ definition" @ MSG_BNDREJ_SINGLE "attempt to bind to a SINGLETON definition without \ following default search model" @ MSG_BND_PLTPAD_TO " pltpad: %#llx: file=%s bound to file=%s: \ symbol '%s'" @ MSG_BND_PLTPAD_FROM " pltpad: %#llx: bound from file=%s: symbol '%s'" @ MSG_BND_PSUM_SPARCV9 "Summary of PLT types bound: 21d=%d, 24d=%d, u32=%d, \ u44=%d, full=%d, far=%d, Total=%d" @ MSG_BND_PSUM_SPARC "Summary of PLT types bound: 21d=%d, 24d=%d, \ full=%d, Total=%d" @ MSG_BND_PSUM_DEFAULT "Summary of PLT types bound: total=%d" # Relocation messages @ MSG_REL_GENERATE "generating input relocations: section=%s" @ MSG_REL_COLLECT "collecting input relocations: section=%s, file=%s" @ MSG_REL_ACTIVE "performing active relocations" @ MSG_REL_CREATING "creating output relocations" @ MSG_REL_START "relocation processing: file=%s%s" @ MSG_REL_FINISH "relocation processing: file=%s; finished%s" @ MSG_REL_NONE "relocation processing: file=%s%s; nothing to do" @ MSG_REL_PLT " (plt processing only)" @ MSG_REL_FAIL " (failed)" @ MSG_REL_BADROFFSET "" @ MSG_REL_TRANSITION "relocation: %s: section=%s; input from file=%s; \ offset=0x%llx; symbol=%s; transitioned to: %s" @ MSG_REL_DISCARDED "relocation against discarded section=%s from file=%s; \ relocation type=%s offset=0x%llx; relocation discarded" @ MSG_REL_COPY "copy data from file=%s to file=%s: symbol '%s'%s" @ MSG_REL_SLOPPYCOMDAT "the following relocation references a discarded \ section; relocation redirected to section %s in \ file %s" # Entrance criteria messages @ MSG_ECR_TITLE "Segment Entrance Criteria Descriptor List" @ MSG_ECR_DESC "entrance descriptor[%u]" # Elf Data (section) messages # TRANSLATION_NOTE - the following two entries provide for a series of one or # more standard 32-bit Elf_Data entries that align with the initial title. @ MSG_EDATA_TITLE_32 " addr type size offset al file" @ MSG_EDATA_ENTRY_32 " %3s %#10llx %-5s %#10llx %#8llx %2lld %s %s%s" # TRANSLATION_NOTE - the following two entries provide for a series of one or # more standard 64-bit Elf_Data entries that align with the initial title. @ MSG_EDATA_TITLE_64 " addr type \ size offset al file" @ MSG_EDATA_ENTRY_64 " %3s %#18llx %-5s %#18llx %#16llx %2lld %s %s%s" @ MSG_EDATA_IGNSCN " (section ignored)" # File messages @ MSG_FIL_BASIC "file=%s [ %s ]" @ MSG_FIL_ARCHIVE "file=%s [ archive ] %s" @ MSG_FIL_SKIP_1 "file=%s; skipped: already processed as %s" @ MSG_FIL_SKIP_2 "file=%s; skipped: already processed" @ MSG_FIL_REUSE "file=%s; reusing: originally processed as %s" @ MSG_FIL_PROT "file=%s; modifying memory protections (%c PROT_WRITE)" @ MSG_FIL_DELETE "file=%s; deleting" @ MSG_FIL_DLOPEN "file=%s; dlopen() called from file=%s %s %s" @ MSG_FIL_DLCLOSE "file=%s; dlclose() %s" @ MSG_FIL_CLEANUP "file=%s; loading failed: cleaning up lmco 0x%llx" @ MSG_FIL_DLDUMP "file=%s; dldump() to file=%s %s" @ MSG_FIL_LAZYLOAD "file=%s; lazy loading from file=%s: symbol=%s" @ MSG_FIL_PRELOAD "file=%s; preloading" @ MSG_FIL_NEEDED "file=%s; needed by %s" @ MSG_FIL_FILTER_1 "file=%s; filter for %s (configuration definition)" @ MSG_FIL_FILTER_2 "file=%s; filter for %s" @ MSG_FIL_FILTEE_2 "file=%s; filtee processing failed" @ MSG_FIL_FILTEE_3 "file=%s; filtee skipped (auditing directed)" @ MSG_FIL_FIXNAME "file=%s; required name=%s" @ MSG_FIL_PROMOTE "file=%s; promoting mode to %s" @ MSG_FIL_AOUT "file=%s [ AOUT ]; generating link map" @ MSG_FIL_ELF "file=%s [ ELF ]; generating link map%s" @ MSG_FIL_LDSO "file=%s [ ELF ]" # NOTE: these are used by lari(1), use care when changing. @ MSG_FIL_ANALYZE "file=%s; analyzing %s" @ MSG_FIL_FILTEE_1 "file=%s; filtered by %s" @ MSG_FIL_CONFIG "file=%s [ ELF ]; configuration alternate found: %s" @ MSG_FIL_DATA_AS " addr: %#18llx size: %#18llx" @ MSG_FIL_DATA_LL " lmid: %18.18s lmco: %#18llx" @ MSG_FIL_DATA_EA " envp: %#18llx auxv: %#18llx" @ MSG_FIL_MMAPOBJ "file=%s mmapobj entries=%d" @ MSG_FIL_MMAPOBJ_1 " [%d]: addr: %#18llx fsize: %#18llx %s" @ MSG_FIL_MMAPOBJ_2 " offset: %#17llx msize: %#18llx" @ MSG_FIL_BND_ADD "file=%s; add binding to:" @ MSG_FIL_BND_FILE " file=%s %s" @ MSG_FIL_DEP_TITLE "processing %s dependencies %s:" @ MSG_FIL_DEP_NONE " file=%s; has no dependencies" @ MSG_FIL_DEP_ENT " file=%s; depends on:" @ MSG_FIL_DEP_ADD " file=%s; object added %s %s" @ MSG_FIL_DEP_UPDATE " file=%s; object updated %s %s" @ MSG_FIL_DEP_DELETE " file=%s; object deleting %s" @ MSG_FIL_DEP_REMOVE " file=%s; object removed from handle %s" @ MSG_FIL_DEP_REMAIN " file=%s; object must remain on handle %s" @ MSG_FIL_DEP_ORPHAN " file=%s; object remains on orphan handle %s" @ MSG_FIL_DEP_REINST " file=%s; object reinstated %s" @ MSG_FIL_HDL_CREATE "handle=%s; creating %s 0x%llx:" @ MSG_FIL_HDL_ADD "handle=%s; adding dependent objects %s:" @ MSG_FIL_HDL_DELETE "handle=%s; inspecting for deletion:" @ MSG_FIL_HDL_ORPHAN "handle=%s; deletion cannot be completed: moving to \ orphan list:" @ MSG_FIL_HDL_REINST "handle=%s; reinstating from orphan list:" @ MSG_FIL_HDL_COLLECT "handle=%s; collected for possible removal %s" @ MSG_FIL_HDL_RETAIN "handle=%s; externally referenced from %s: handle \ retained" @ MSG_FIL_DEL_RESCAN "pending deletions; rescanning orphan list for \ available deletions" @ MSG_FIL_AR_RESCAN "rescanning archives from args[%d-%d]; additional \ members may satisfy prior extractions" @ MSG_FIL_CONFIG_ERR "configuration file=%s: %s" @ MSG_FIL_CONFIG_ERR_1 "ignored (configuration building)" @ MSG_FIL_CONFIG_ERR_2 "invalid version" @ MSG_FIL_CONFIG_ERR_3 "unable to process file" @ MSG_FIL_CONFIG_ERR_4 "corrupt or truncated file" @ MSG_FIL_CONFIG_ERR_5 "incompatible ELF class, byte order, or machine \ architecture" @ MSG_FIL_MODIFIED "file=%s; open modified by support library: %s" @ MSG_FIL_NAMECHANGE " name changed to: %s" @ MSG_FIL_FDCHANGE " file descriptor changed from: %d to: %d %s" @ MSG_FIL_ELFCHANGE " ELF descriptor changed from: 0x%llx to: 0x%llx %s" @ MSG_FIL_IGNORE " (file will be ignored)" @ MSG_CNTL_TITLE "control list processing complete: moving lmco 0x%llx \ to lmco 0x%llx" @ MSG_REJ_MACH "file=%s; rejected: wrong machine type: %s" @ MSG_REJ_CLASS "file=%s; rejected: wrong ELF class: %s" @ MSG_REJ_DATA "file=%s; rejected: wrong ELF data format: %s" @ MSG_REJ_TYPE "file=%s; rejected: bad ELF type: %s" @ MSG_REJ_BADFLAG "file=%s; rejected: bad ELF flags value: %s" @ MSG_REJ_MISFLAG "file=%s; rejected: mismatched ELF flags value: %s" @ MSG_REJ_VERSION "file=%s; rejected: mismatched ELF/lib version: %s" @ MSG_REJ_HAL "file=%s; rejected: HAL R1 extensions required" @ MSG_REJ_US3 "file=%s; rejected: Sun UltraSPARC III extensions \ required" @ MSG_REJ_STR "obj=%s; rejected: %s" @ MSG_REJ_UNKFILE "obj=%s; rejected: unknown file type" @ MSG_REJ_UNKCAP "obj=%s; rejected: unknown capability: %d" @ MSG_REJ_HWCAP_1 "obj=%s; rejected: hardware capability (CA_SUNW_HW_1) \ unsupported: %s" @ MSG_REJ_SFCAP_1 "obj=%s; rejected: software capability (CA_SUNW_SF_1) \ unsupported: %s" @ MSG_REJ_MACHCAP "obj=%s; rejected: machine capability (CA_SUNW_MACH) \ unsupported: %s" @ MSG_REJ_PLATCAP "obj=%s; rejected: platform capability (CA_SUNW_PLAT) \ unsupported: %s" @ MSG_REJ_HWCAP_2 "obj=%s; rejected: hardware capability (CA_SUNW_HW_2) \ unsupported: %s" # Libs messages @ MSG_LIB_INITPATH "Library Search Paths (initial)" @ MSG_LIB_UPPATH "Library Search Paths (-L updated)" @ MSG_LIB_LOPT "find lib=-l%s; path=%s" @ MSG_LIB_REQUIRED "find lib=%s; path=%s (required by %s)" @ MSG_LIB_LDLIBPATH " search path=%s (LD_LIBRARY_PATH)" @ MSG_LIB_LDLIBPATHC " search path=%s (configuration LD_LIBRARY_PATH - %s)" @ MSG_LIB_RUNPATH " search path=%s (RUNPATH/RPATH from file %s)" @ MSG_LIB_DEFAULT " search path=%s (default)" @ MSG_LIB_DEFAULTC " search path=%s (configuration default - %s)" @ MSG_LIB_TDEFAULT " search path=%s (trusted default)" @ MSG_LIB_TDEFAULTC " search path=%s (trusted configuration default - %s)" @ MSG_LIB_LIBPATH " search path=%s (LIBPATH or -YP)" @ MSG_LIB_YPATH " search path=%s replaces path=%s (-Y%c)" @ MSG_LIB_FIND "find object=%s; searching" @ MSG_LIB_TRYING " trying path=%s%s" @ MSG_LIB_ALTER " trying path=%s (auditing supplied alternative)" @ MSG_LIB_SKIP " skip path=%s (auditing directed)" @ MSG_LIB_IGNORE " ignore path=%s (insecure directory name)" @ MSG_LIB_INUSE " use path=%s (implicitly secure, as directory \ has already provided dependencies)" # Mapfile messages @ MSG_MAP_MAPFILE "mapfile=%s; version=%d (%s)" @ MSG_MAP_SEG "segment directive; line=%llu; %s" @ MSG_MAP_SEG_ORDER "segment order directive; line=%llu; list_cnt=%lld; %s" @ MSG_MAP_CAP "capability directive; line=%llu" @ MSG_MAP_EC "entrance criteria; line=%llu; added" @ MSG_MAP_OS_ORDER "output section ordering; line=%llu; segment=%s \ section=%s; index=%d" @ MSG_MAP_HDR_NOALLOC "header noalloc directive; line=%llu; first loadable \ segment will not contain ELF and program headers" @ MSG_MAP_SYM_SCOPE "symbol scope definition" @ MSG_MAP_SYM_SIZE "size-symbol directive; line=%llu; segment=%s; \ symbol=%s; %s" @ MSG_MAP_SYM_VER_1 "%s, %s; symbol=%s (%s)" @ MSG_MAP_SYM_VER_2 "%s; symbol=%s (%s)" @ MSG_MAP_DV "depend versions directive; line=%llu, object=%s" @ MSG_MAP_DV_ENTRY "%12.12s %s; line=%llu" @ MSG_MAP_SORT_TITLE "mapfile additions: segment sorting required" @ MSG_MAP_SORT_TITLE_O "before:" @ MSG_MAP_SORT_TITLE_S "after:" @ MSG_MAP_POST_TITLE "mapfile post processing" @ MSG_MAP_ENT_ORD_TITLE "set entrance criteria input section sort keys; \ segment=%s" @ MSG_MAP_ID_ADD "%s: %lld: enter conditional expression id: %s" @ MSG_MAP_ID_CLEAR "%s: %lld: delete conditional expression id: %s" @ MSG_MAP_PASS "%s: %lld: input enabled by %s" @ MSG_MAP_NOPASS "%s: %lld: input disabled by %s" # Move messages @ MSG_MOVE_FILE "file=%s processing move data" @ MSG_MOVE_TITLE1 " i/o offset size repeat stride \ value with respect to" @ MSG_MOVE_TITLE2 " i/o address size repeat stride \ value with respect to" @ MSG_MOVE_ENTRYIN " in %#10llx %6d %6d %6d %#16llx %s" @ MSG_MOVE_ENTRYOUT " out %#10llx %6d %6d %6d %#16llx %s" @ MSG_MOVE_EXPAND " %#10llx %#16llx (expanded)" @ MSG_MOVE_ADJEXPAND "for symbol=%s roffset: new=0x%llx" @ MSG_MOVE_ADJMOVE "for symbol=%s roffset: from=0x%llx, to=0x%llx" @ MSG_MOVE_OUTSCTADJ "adjusting addend for symbol=%s" @ MSG_MOVE_PAREXPN "expanding symbol=%s into .data: %s" @ MSG_MOVE_OUTMOVE "copying move entries for symbol=%s into .SUNW_move" @ MSG_MOVE_INPUT "collecting move entries: file=%s" @ MSG_MOVE_BAD "move %lld offset invalid: %s: offset=0x%llx \ lies outside memory image; move discarded" # Section header messages @ MSG_SHD_MODIFIED "section=%s; section header modified by support \ library: %s" @ MSG_SHD_ORIG " original:" @ MSG_SHD_NEW " new:" # TRANSLATION_NOTE - The following two items are used following a number in # the MSG_SHD_OFFSET_ENT_XX format strings below. For example "1 entry" # or "23 entries". # @ MSG_SHD_ENTRY_1 "entry" @ MSG_SHD_ENTRY_N "entries" # Section messages @ MSG_SEC_BACKING "mapfile symbol definitions: create backing storage:" @ MSG_SEC_INPUT "section=%s; input from file=%s" @ MSG_SEC_INPUT_GEN "section=%s" @ MSG_SEC_INPUT_GENSTR "section=%s; input generated merged string section" @ MSG_SEC_ADDED "section=%s; added to segment=%s" @ MSG_SEC_CREATED "section=%s; added to segment=%s (created)" @ MSG_SEC_REDIRECTED "section=%s; redirected to section=%s" @ MSG_SEC_DISCARDED "section=%s; input from file=%s; \ discarded in favor of section=%s; file=%s" @ MSG_SEC_GNU_COMDAT_1 "section=%s; identified as COMDAT with \ relaxed relocations enabled" @ MSG_SEC_GNU_COMDAT_2 "section=%s; identified as COMDAT" @ MSG_SEC_GNU_COMDAT_3 "section=%s; relaxed relocations enabled" @ MSG_SEC_GRP_DEFINE "section=%s; input from file=%s; defines %s\ group: signature symbol: %s" @ MSG_SEC_GRP_MEMBER "section=%s; input from file=%s; member of %s\ group: signature symbol: %s" @ MSG_SEC_GRP_DISCARDED "section=%s; input from file=%s; discarded in \ favor of group: signature symbol: %s: file=%s" @ MSG_SEC_STRMERGE_DISCARDED "section=%s; input from file=%s; \ discarded in favor of generated merged string section" @ MSG_SEC_STRMERGE_UNSUP "section=%s; input from file=%s; sh_addralign=%lld; \ sh_entsize=%lld; unable to merge sections with this \ size and alignment" @ MSG_SEC_STRTAB_STND "strtab=%s; full size: %lld; uncompressed" @ MSG_SEC_STRTAB_COMP "strtab=%s; full size: %lld; compressed down to: %lld" @ MSG_SEC_GENSTR_COMP "section=%s (generated merged string section); \ full size: %lld; compressed down to: %lld" @ MSG_SEC_STRTAB_HD "strtab=%s; compression information [%d buckets]:" @ MSG_SEC_STRTAB_BCKT " bucket[%d]:" @ MSG_SEC_STRTAB_MSTR " [%lld] %s " @ MSG_SEC_STRTAB_SUFSTR " [%lld] %s " # Unused messages @ MSG_USD_SEC "section=%s; size=0x%llx; input from file=%s; \ unused: does not satisfy any references%s" @ MSG_USD_SECDISCARD "; discarded" @ MSG_USD_FILE "file=%s unused: does not satisfy any references" @ MSG_USD_NEEDSTR "file=%s unused: unable to determine use" @ MSG_USD_UNREF "file=%s unreferenced: unused dependency of %s" @ MSG_USD_FILECYCLIC "file=%s unused: cyclic group [%d] member: \ unreferenced outside of group" @ MSG_USD_LCINTERFACE "file=%s unused interface [%s]: using interface \ from previously loaded object: file=%s" @ MSG_USD_LDLIBPATH " search path=%s unused: LD_LIBRARY_PATH entry" @ MSG_DUP_LDLIBPATH " search path=%s unused: (duplicate) LD_LIBRARY_PATH \ entry" @ MSG_USD_LDLIBPATHC " search path=%s unused: configuration \ LD_LIBRARY_PATH entry - %s" @ MSG_DUP_LDLIBPATHC " search path=%s unused: (duplicate) configuration \ LD_LIBRARY_PATH entry - %s" @ MSG_USD_RUNPATH " search path=%s unused: RUNPATH/RPATH from file %s" # Segment messages @ MSG_SEG_DESC_INUSE "Program Header / Segment Descriptor List (in use)" @ MSG_SEG_DESC_AVAIL "Program Header / Segment Descriptor List (available)" # Support messages @ MSG_SUP_REQ "support object request=%s (%s)" @ MSG_SUP_REQ_ENV "supplied via SGS_SUPPORT" @ MSG_SUP_REQ_CMD "supplied via -S" @ MSG_SUP_ROUTINE " support object=%s: provides routine %s" @ MSG_SUP_CALLING_1 " calling routine=%s (%s)" @ MSG_SUP_CALLING_2 " calling routine=%s (%s) %s=%s" @ MSG_SUP_VNONE " unloading object=%s: version=LD_SUP_VNONE" @ MSG_SUP_OUTFILE "output file" @ MSG_SUP_INFILE "input file" @ MSG_SUP_INSEC "input section" @ MSG_SUP_SEC "section" # Symbol strings @ MSG_SYM_AR_FILE "symbol table processing; input file=%s [ archive ] %s" @ MSG_SYM_AR_ENTRY "archive[%lld]=%s" @ MSG_SYM_AR_CHECK "archive[%lld]=%s (%s) checking for tentative or \ restricted visibility override" @ MSG_SYM_AR_RESOLVE "archive[%lld]=%s (%s) resolves undefined or tentative \ symbol" @ MSG_SYM_AR_FORCEDEXRT "archive[%lld]=%s (%s) forced extraction" @ MSG_SYM_SPECIAL "symbol table processing; building special symbols" @ MSG_SYM_PROCESS "symbol table processing; input file=%s [ %s ]" @ MSG_SYM_FINAL "symbol table processing; final update" @ MSG_SYM_INDEX "symbol table processing; determining section \ symbol's index" @ MSG_SYM_BSS "symbol table processing; assigning to bss \ (possible copy relocations)" @ MSG_SYM_REDUCED "symbol table processing; reducing global symbols" @ MSG_SYM_RETAINING "symbol table processing; retaining local symbols" @ MSG_SYM_VERSION "symbol table processing; adding version symbols" @ MSG_SYM_CAPABILITIES "symbol table processing; adding local capabilities \ symbols" @ MSG_SYM_BASIC "symbol[%d]=%s" @ MSG_SYM_ADDING "symbol[%d]=%s (global); adding" @ MSG_SYM_SECTION "symbol[%d]=%s (section); segment=%s" @ MSG_SYM_RESOLVING "symbol[%d]=%s (global); resolving [%d][%d]" @ MSG_SYM_UPDATE "symbol=%s; updated" @ MSG_SYM_CREATE "symbol=%s; creating" @ MSG_SYM_REDUCING "symbol=%s; reducing to local" @ MSG_SYM_ELIMINATING "symbol=%s; eliminating" @ MSG_SYM_NOTELIMINATE "symbol=%s; not eliminated: referenced by \ section=%s, entry[%d]" @ MSG_SYM_DISCARD_SEC "symbol=%s; discarded: originates from unused or \ discarded section=%s from file=%s" @ MSG_SYM_DISCARD_FILE "symbol=%s; discarded: originates from unused or \ discarded file=%s" @ MSG_SYM_DISCARD_DUP "symbol[%d]=%s; discarded duplicate: originates from \ file=%s" @ MSG_SYM_WRAP "symbol[%d]=%s renamed to %s (-z wrap)" @ MSG_SYM_CAP_ORIG "symbol[%d]=%s converting to symbol capability \ (-z symbolcap)" @ MSG_SYM_CAP_LOCAL "symbol[%d]=%s creating local capability \ (-z symbolcap)" @ MSG_SYM_AOUT "symbol=%s; (original AOUT name)" @ MSG_SYM_LOOKUP "symbol=%s; lookup in file=%s [ %s ]" @ MSG_SYM_DLSYM_1 "symbol=%s; dlsym() called from file=%s %s %s" @ MSG_SYM_DLSYM_2 "symbol=%s; dlsym() called from file=%s; starting \ at file=%s %s %s" @ MSG_CAP_SYM_DEFAULT " symbol=%s[%u]: capability family default" @ MSG_CAP_SYM_USED " symbol=%s[%u]: used" @ MSG_CAP_SYM_CANDIDATE " symbol=%s[%u]: capability candidate" @ MSG_CAP_SYM_REJECTED " symbol=%s[%u]: capability rejected" @ MSG_CAP_SYM_HW_1 " symbol=%s[%u]: capability specific \ (CA_SUNW_HW_1): [ %s ]" @ MSG_CAP_SYM_SF_1 " symbol=%s[%u]: capability specific \ (CA_SUNW_SF_1): [ %s ]" @ MSG_CAP_SYM_MACH " symbol=%s[%u]: capability specific \ (CA_SUNW_MACH): [ %s ]" @ MSG_CAP_SYM_PLAT " symbol=%s[%u]: capability specific \ (CA_SUNW_PLAT): [ %s ]" @ MSG_CAP_SYM_HW_2 " symbol=%s[%u]: capability specific \ (CA_SUNW_HW_2): [ %s ]" @ MSG_SYM_LAZY_RESCAN "rescanning for lazy dependencies for symbol: %s" @ MSG_SYM_DUPSORTADDR "section %s: symbol '%s' and symbol '%s' have the \ same address: %#llx" @ MSG_SYM_IGNGNUVER "symbol=%s; hash index=%d; version=%d; skipping \ symbol with GNU version hidden bit set in file=%s" # Syminfo string @ MSG_SYMINFO_INFO "syminfo information" # Version strings @ MSG_VER_AVAIL_1 "version availability: file=%s" @ MSG_VER_AVAIL_2 " available version selected from" @ MSG_VER_DEF_TITLE "version definition processing: file=%s" @ MSG_VER_NEED_TITLE "version needed processing: file=%s" @ MSG_VER_NOINTERFACE "version definition has no interface symbols: %s" # SHF_ORDERED related messages. Token used is sections. @ MSG_ORD_SORT_BEFORE "section=%s; requires output section reordering:" @ MSG_ORD_SORT_AFTER "section=%s; output section reordered:" @ MSG_ORD_HDR_1 " number of SHN_BEGIN=%u, ordered=%u, default=%u, \ SHN_AFTER=%u" @ MSG_ORD_TITLE_1 " %s=SHN_BEGIN: section=%s from %s" @ MSG_ORD_TITLE_2 " %s=SHN_AFTER: section=%s from %s" @ MSG_ORD_TITLE_3 " sort key=%u: section=%s from %s, %s=%s" @ MSG_ORD_ERR_TITLE "the SHF_ORDERED section %s from %s has \ an error; flag ignored" @ MSG_ORD_ERR_INFORANGE " the sh_info field is out of range" @ MSG_ORD_ERR_ORDER " the section pointed by sh_info is an ordered section" @ MSG_ORD_ERR_LINKRANGE " the sh_link field is out of range" @ MSG_ORD_ERR_FLAGS " the sh_flag is incorrect" @ MSG_ORD_ERR_CYCLIC " the sh_link is cyclic" @ MSG_ORD_ERR_LINKINV " a section pointed to by sh_link has an error" # Link-Auditing Messages @ MSG_AUD_INIT "audit library %s: processing" @ MSG_AUD_VERSION "audit library %s: running at version: %d" @ MSG_AUD_INTERFACE "audit library %s: provides interface: %s" @ MSG_AUD_OBJECT "audit library %s: offered object: %s" @ MSG_AUD_SYM "audit library %s: %s: symbol: %s: value: 0x%llx %s" @ MSG_AUD_SYMNEW "modified to: 0x%llx" @ MSG_AUD_IGNORE "file=%s; global auditing request ignored: object \ did not initiate process" @ MSG_AUD_SKIP "file=%s; skipped: using auditor from %s" @ MSG_AUD_TERM "file=%s; auditing terminated search" # GOT Messages @ MSG_GOT_INFO "Global Offset Table information: (%u entries)" # TRANSLATION_NOTE # Do not translate .init or .fini, they represent reserved section names. @ MSG_UTL_INIT "calling .init (%s): %s" @ MSG_UTL_FINI "calling .fini: %s" @ MSG_UTL_ARRAY "calling %s[%d]:0x%llx: %s" @ MSG_UTL_TRANS "transferring control: %s" @ MSG_UTL_INTOOLATE "loading after relocation has started: interposition \ request (DF_1_INTERPOSE) ignored: %s" @ MSG_UTL_EDGE_TITLE_I "traversing %s dependency edge for interposer:" @ MSG_UTL_EDGE_TITLE_S "traversing %s dependency edge:" @ MSG_UTL_EDGE_START " node (%d): file=%s" @ MSG_UTL_EDGE_IN " node (%d): file=%s: referenced by %s %s" @ MSG_UTL_EDGE_OUT " node (%d): file=%s; cyclic dependency on %s" @ MSG_UTL_COLLECT " [%d] %s; collecting %s section" @ MSG_UTL_SORT "from sorted order" @ MSG_UTL_PEND "pending" @ MSG_UTL_DYN "dynamically triggered" @ MSG_UTL_DONE "done" @ MSG_UTL_NOINIT "warning: calling %s whose init has not completed" @ MSG_UTL_DBNOTIFY "notify debugger: event: %s state: %s" @ MSG_UTL_SCC_TITLE " cycle detected - sorting cyclic dependencies in %s" @ MSG_UTL_SCC_SUBI "reverse load-order" @ MSG_UTL_SCC_SUBF "load-order" @ MSG_UTL_LCINTERFACE "file=%s; provides interface [%s]: 0x%llx" # Generic strings @ MSG_STR_IGNORE "ignored" @ MSG_STR_ENTERED "entered" @ MSG_STR_ORIGINAL "original" @ MSG_STR_EXCLUDE "exclude" @ MSG_STR_RESET "reset" @ MSG_STR_IN " in" @ MSG_STR_OUT "out" @ MSG_STR_ACT "act" @ MSG_STR_CURRENT "current" @ MSG_STR_ADD "add" @ MSG_STR_OLD "old" @ MSG_STR_NEW "new" @ MSG_STR_NEW_IMPLICIT "new (implicit)" @ MSG_STR_RESOLVED "resolved" @ MSG_STR_ADDING "adding" @ MSG_STR_UP_1 "updating" @ MSG_STR_UP_2 "updated" @ MSG_STR_ALLOW "allow" @ MSG_STR_REQUIRE "require" @ MSG_STR_MOD_BEFORE "modify (before)" @ MSG_STR_MOD_AFTER "modify (after)" @ MSG_STR_UNKNOWN "" @ MSG_STR_ORPHAN "" @ MSG_STR_UNUSED "(unused)" @ MSG_STR_AGAIN "(again)" @ MSG_STR_NULL "(null)" @ MSG_STR_ALTER " (alternate)" @ MSG_STR_COPYZERO " (copy zero's unnecessary)" @ MSG_STR_TEMPORARY " (temporary)" @ MSG_STR_RETRY " (retry) " # TLS related messages @ MSG_TLS_STATBLOCK1 "static TLS module: [%ld] %s" @ MSG_TLS_STATBLOCK2 "static TLS reservation: in use %#llx: \ additional backup: %#llx" @ MSG_TLS_STATBLOCK3 "static TLS requirement: [%ld] %s: size %#llx: \ satisfied from backup reservation: remaining %#llx" @ MSG_TLS_MODENT1 " block: %#18llx soff: %#10llx flags: %#llx \ %s" @ MSG_TLS_MODENT2 " filesz: %#18llx memsz: %#10llx modid: %lld" @ MSG_TLS_MODACT "%s TLS module: %s" @ MSG_TLS_ADD "add" @ MSG_TLS_REMOVE "remove" # Statistics related messages @ MSG_STATS_AR "archive %s: count=%d, used=%d (%d%%)" @ MSG_STATS_GENERAL "General Statistics:" @ MSG_STATS_FILES " Input files: relocatables=%lld \ shared objects=%lld archives=%lld" @ MSG_STATS_SYMBOLS_OUT " Symbols output: globals=%-10lld locals=%lld" @ MSG_STATS_SYMBOLS_IN " Symbols input: globals=%-10lld scoped=%-10lld \ eliminated=%lld" @ MSG_STATS_RELOCS_OUT " Relocations output: records=%lld" @ MSG_STATS_RELOCS_IN " Relocations input: records=%-10lld applied=%lld" # Capabilities messages @ MSG_CAP_SYS_HW_1 "hardware capabilities (CA_SUNW_HW_1) - %s" @ MSG_CAP_SYS_SF_1 "software capabilities (CA_SUNW_SF_1) - %s" @ MSG_CAP_SYS_MACH "machine capability (CA_SUNW_MACH) - %s" @ MSG_CAP_SYS_PLAT "platform capability (CA_SUNW_PLAT) - %s" @ MSG_CAP_SYS_HW_2 "hardware capabilities (CA_SUNW_HW_2) - %s" @ MSG_CAP_ALT_HW_1 "alternative hardware capabilities (CA_SUNW_HW_1) - %s" @ MSG_CAP_ALT_SF_1 "alternative software capabilities (CA_SUNW_SF_1) - %s" @ MSG_CAP_ALT_MACH "alternative machine capability (CA_SUNW_MACH) - %s" @ MSG_CAP_ALT_PLAT "alternative platform capability (CA_SUNW_PLAT) - %s" @ MSG_CAP_ALT_HW_2 "alternative hardware capabilities (CA_SUNW_HW_2) - %s" @ MSG_CAP_SEC_TITLE "capabilities; input file=%s" @ MSG_CAP_SEC_ENTRY "%12.12s %-15.15s %s" @ MSG_CAP_CANDIDATE "obj=%s; capabilities candidate" @ MSG_CAP_POST_TITLE "capabilities post processing" @ MSG_CAP_FILTER_1 "dir=%s; capability directory filtered by %s" @ MSG_CAP_FILTER_2 "dir=%s; no capability objects found" @ MSG_ELF_HEADER "ELF Header" # Capabilities entries. # TRANSLATION_NOTE - the following two entries provide for a series of one or # more capabilities table entries that align with the initial title. @ MSG_CAP_ELF_TITLE " index tag value" @ MSG_CAP_ELF_ENTRY "%10.10s %-15.15s %s" # Dynamic entries. # TRANSLATION_NOTE - the following two entries provide for a series of one or # more dynamic table entries that align with the initial title. @ MSG_DYN_TITLE " index tag value" @ MSG_DYN_ENTRY "%10.10s %-16.16s %-#16llx %s" # Symbol table entries. # TRANSLATION_NOTE - the following entries provide for a series of one or more # standard 32-bit symbol table entries that align with the initial title. @ MSG_SYM_EFS_TITLE_32 " index value size type bind \ oth ver shndx name" @ MSG_SYM_LDS_TITLE_32 " value size type bind \ oth ver shndx" @ MSG_SYM_EFS_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \ %-14.14s %s" # TRANSLATION_NOTE - the following entries provide for a series of one or more # long 32-bit symbol table entries that align with the initial title. @ MSG_SYM_EFL_TITLE_32 " index value size type bind \ oth ver shndx / name" @ MSG_SYM_LDL_TITLE_32 " value size type bind \ oth ver shndx" @ MSG_SYM_EFL_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \ %-14s %s" # TRANSLATION_NOTE - the following entries provide for a series of one or more # standard 64-bit symbol table entries that align with the initial title. @ MSG_SYM_EFS_TITLE_64 " index value size \ type bind oth ver shndx name" @ MSG_SYM_LDS_TITLE_64 " value size \ type bind oth ver shndx" @ MSG_SYM_EFS_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \ %-14.14s %s" # TRANSLATION_NOTE - the following entries provide for a series of one or more # long 64-bit symbol table entries that align with the initial title. @ MSG_SYM_EFL_TITLE_64 " index value size \ type bind oth ver shndx / name" @ MSG_SYM_LDL_TITLE_64 " value size \ type bind oth ver shndx" @ MSG_SYM_EFL_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \ %-14s %s" # Syminfo entries. # TRANSLATION_NOTE - the following two entries provide for a series of one or # more symbol information table entries that align with the initial title. @ MSG_SYMINFO_TITLE " index flags \ bound to symbol" @ MSG_SYMINFO_ENTRY "%10.10s %-8s %7s %-24s %s" @ MSG_SYMINFO_CAP "" @ MSG_SYMINFO_SELF "" @ MSG_SYMINFO_PARENT "" @ MSG_SYMINFO_EXTERN "" # Global offset table entries. # TRANSLATION_NOTE - the following two entries are used by elfdump(1), and # provide for a series of one or more 32-bit got table entries that align with # the initial title. @ MSG_GOT_TITLE_32 " index addr value \ pending relocation" @ MSG_GOT_ENTRY_RE_32 "%10.10s 0x%08llx 0x%08llx %-24s %s" @ MSG_GOT_ENTRY_NR_32 "%10.10s 0x%08llx 0x%08llx" # TRANSLATION_NOTE - the following two entries are used by elfdump(1), and # provide for a series of one or more 64-bit got table entries that align with # the initial title. @ MSG_GOT_TITLE_64 " index addr \ value pending relocation" @ MSG_GOT_ENTRY_RE_64 "%10.10s 0x%016llx 0x%016llx %-24s %s" @ MSG_GOT_ENTRY_NR_64 "%10.10s 0x%016llx 0x%016llx" # TRANSLATION_NOTE - the following three entries are used by ld(1), and provide # for a series of one or more 32-bit got table entries that align with one of # the initial titles. @ MSG_GOT_COLUMNS1_32 " index ref offset addend symbol" @ MSG_GOT_COLUMNS2_32 " index ref offset value symbol" @ MSG_GOT_FORMAT1_32 "%10.10s %3s 0x%08llx 0x%08llx %s" @ MSG_GOT_FORMAT2_32 "%10.10s %3s 0x%08llx 0x%08llx %s:%s" # TRANSLATION_NOTE - the following three entries are used by ld(1), and provide # for a series of one or more 64-bit got table entries that align with one of # the initial titles. @ MSG_GOT_COLUMNS1_64 " index ref offset \ addend symbol" @ MSG_GOT_COLUMNS2_64 " index ref offset \ value symbol" @ MSG_GOT_FORMAT1_64 "%10.10s %3s 0x%016llx 0x%016llx %s" @ MSG_GOT_FORMAT2_64 "%10.10s %3s 0x%016llx 0x%016llx %s:%s" # Version table entries. @ MSG_VER_DEF " index version dependency" @ MSG_VER_NEED " file version" @ MSG_VER_NEED_GNUVER " index file version" @ MSG_VER_LINE_1 "%10.10s %-26.26s %-20s %s" @ MSG_VER_LLINE_1 "%10s %-26s %-20s %s" @ MSG_VER_LINE_2 "%47s %s" @ MSG_VER_LINE_3 "%38s %-20s %s" @ MSG_VER_LINE_4 " %s" @ MSG_VER_LINE_5 " %-26.26s %s" @ MSG_VER_LLINE_5 " %-26s %s" # Relocation entries. # TRANSLATION_NOTE - the following strings are used by elfdump(1). These # strings provide for a series of one or more 32-bit relocation table entries, # using truncated section names, that align with one of the initial titles. @ MSG_REL_EFSA_TITLE_32 " type offset addend \ section symbol" @ MSG_REL_EFSN_TITLE_32 " type offset \ section symbol" @ MSG_REL_EFSA_ENTRY_32 " %-24s %#10llx %#10llx %-14.14s %s" @ MSG_REL_EFSN_ENTRY_32 " %-24s %#10llx %-14.14s %s" # TRANSLATION_NOTE - the following strings are used by elfdump(1). These # strings provide for a series of one or more 32-bit relocation table entries, # using long section names, that align with one of the initial titles. @ MSG_REL_EFLA_TITLE_32 " type offset addend \ section / symbol" @ MSG_REL_EFLN_TITLE_32 " type offset \ section / symbol" @ MSG_REL_EFLA_ENTRY_32 " %-24s %#10llx %#10llx %-14s %s" @ MSG_REL_EFLN_ENTRY_32 " %-24s %#10llx %-14s %s" # TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These # strings provide for a series of one or more 32-bit relocation table entries, # that align with the initial titles. @ MSG_REL_RTA_TITLE_32 " type offset \ addend symbol" @ MSG_REL_RTN_TITLE_32 " type offset \ value symbol" @ MSG_REL_RTV_TITLE_32 " value" @ MSG_REL_RTA_ENTRY_32 " %5s %-24s %#10llx %#10llx %s %s" @ MSG_REL_RTN_ENTRY_32 " %5s %-24s %#10llx %s %s" @ MSG_REL_RT_APLVAL_32 " apply %#10llx %#10llx" @ MSG_REL_RT_APLREG_32 " apply %10.10s %#10llx" # TRANSLATION_NOTE - the following strings are used by ld(1). These strings # provide for a series of one or more 32-bit relocation table entries, using # truncated section names, that align with one of the initial titles. @ MSG_REL_LDSA_TITLE_32 " type \ offset addend section symbol" @ MSG_REL_LDSN_TITLE_32 " type \ offset section symbol" @ MSG_REL_LDSA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14.14s %s %s" @ MSG_REL_LDSN_ENTRY_32 " %5s %-24s %#10llx %-14.14s %s %s" @ MSG_REL_LDSV_TITLE_32 " type \ offset value section symbol" # TRANSLATION_NOTE - the following strings are used by ld(1). These strings # provide for a series of one or more 32-bit relocation table entries, using # long section names, that align with one of the initial titles. @ MSG_REL_LDLA_TITLE_32 " type \ offset addend section / symbol" @ MSG_REL_LDLN_TITLE_32 " type \ offset section / symbol" @ MSG_REL_LDLA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14s %s %s" @ MSG_REL_LDLN_ENTRY_32 " %5s %-24s %#10llx %-14s %s %s" @ MSG_REL_LDLV_TITLE_32 " type \ offset value section / symbol" # TRANSLATION_NOTE - the following strings are used by elfdump(1). These # strings provide for a series of one or more 64-bit relocation table entries, # using truncated section names, that align with one of the initial titles. @ MSG_REL_EFSA_TITLE_64 " type \ offset addend section symbol" @ MSG_REL_EFSN_TITLE_64 " type \ offset section symbol" @ MSG_REL_EFSA_ENTRY_64 " %-24s %#18llx %#18llx %-14.14s %s" @ MSG_REL_EFSN_ENTRY_64 " %-24s %#18llx %-14.14s %s" # TRANSLATION_NOTE - the following strings are used by elfdump(1). These # strings provide for a series of one or more 64-bit relocation table entries, # using long section names, that align with one of the initial titles. @ MSG_REL_EFLA_TITLE_64 " type \ offset addend section / symbol" @ MSG_REL_EFLN_TITLE_64 " type \ offset section / symbol" @ MSG_REL_EFLA_ENTRY_64 " %-24s %#18llx %#18llx %-14s %s" @ MSG_REL_EFLN_ENTRY_64 " %-24s %#18llx %-14s %s" # TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These # strings provide for a series of one or more 64-bit relocation table entries, # that align with the initial titles. @ MSG_REL_RTA_TITLE_64 " type \ offset addend symbol" @ MSG_REL_RTN_TITLE_64 " type \ offset value symbol" @ MSG_REL_RTV_TITLE_64 " value" @ MSG_REL_RTA_ENTRY_64 " %5s %-24s %#18llx %#18llx %s %s" @ MSG_REL_RTN_ENTRY_64 " %5s %-24s %#18llx %s %s" @ MSG_REL_RT_APLVAL_64 " apply %#18llx %#18llx" @ MSG_REL_RT_APLREG_64 " apply %18.18s %#18llx" # TRANSLATION_NOTE - the following strings are used by ld(1). These strings # provide for a series of one or more 64-bit relocation table entries, using # truncated section names, that align with one of the initial titles. @ MSG_REL_LDSA_TITLE_64 " type \ offset addend section symbol" @ MSG_REL_LDSN_TITLE_64 " type \ offset section symbol" @ MSG_REL_LDSA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14.14s %s %s" @ MSG_REL_LDSN_ENTRY_64 " %5s %-24s %#18llx %-14.14s %s %s" @ MSG_REL_LDSV_TITLE_64 " type \ offset value section symbol" # TRANSLATION_NOTE - the following strings are used by ld(1). These strings # provide for a series of one or more 64-bit relocation table entries, using # long section names, that align with one of the initial titles. @ MSG_REL_LDLA_TITLE_64 " type \ offset addend section / symbol" @ MSG_REL_LDLN_TITLE_64 " type \ offset section / symbol" @ MSG_REL_LDLA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14s %s %s" @ MSG_REL_LDLN_ENTRY_64 " %5s %-24s %#18llx %-14s %s %s" @ MSG_REL_LDLV_TITLE_64 " type \ offset value section / symbol" # Callback messages @ MSG_CB_IPHDR_ENTER "dl_iterate_phdr enter:" @ MSG_CB_IPHDR_MAPCNG "dl_iterate_phdr object map/unmap in callback:" @ MSG_CB_IPHDR_UNMAP "dl_iterate_phdr early return due to object unmap" @ MSG_CB_IPHDR_CALLBACK "dl_iterate_phdr callback:" @ MSG_CB_IPHDR_NAME " dlpi_name: %s" @ MSG_CB_IPHDR_MAPCNT " dlpi_adds: %-18llu dlpi_subs: %-18llu" @ MSG_CB_IPHDR_ADDR_32 " dlpi_addr: %#-10llx" @ MSG_CB_IPHDR_PHDR_32 " dlpi_phdr: %#-10llx dlpi_phnum: %u" @ MSG_CB_IPHDR_ADDR_64 " dlpi_addr: %#-18llx" @ MSG_CB_IPHDR_PHDR_64 " dlpi_phdr: %#-18llx dlpi_phnum: %u" @ _END_ # Debug enabling tokens (for now these are untranslated) @ MSG_TOK_ALL "all" @ MSG_TOK_ARGS "args" @ MSG_TOK_BINDINGS "bindings" @ MSG_TOK_CALLBACK "callback" @ MSG_TOK_CAP "cap" @ MSG_TOK_BASIC "basic" @ MSG_TOK_ENTRY "entry" @ MSG_TOK_FILES "files" @ MSG_TOK_HELP "help" @ MSG_TOK_INIT "init" @ MSG_TOK_LIBS "libs" @ MSG_TOK_MAP "map" @ MSG_TOK_RELOC "reloc" @ MSG_TOK_SECTIONS "sections" @ MSG_TOK_SEGMENTS "segments" @ MSG_TOK_SUPPORT "support" @ MSG_TOK_SYMBOLS "symbols" @ MSG_TOK_TLS "tls" @ MSG_TOK_VERSIONS "versions" @ MSG_TOK_AUDIT "audit" @ MSG_TOK_GOT "got" @ MSG_TOK_MOVE "move" @ MSG_TOK_DEMANGLE "demangle" @ MSG_TOK_STRTAB "strtab" @ MSG_TOK_STATS "statistics" @ MSG_TOK_UNUSED "unused" @ MSG_TOK_DETAIL "detail" @ MSG_TOK_LONG "long" @ MSG_TOK_NAME "name" @ MSG_TOK_FULLNAME "fullname" @ MSG_TOK_CLASS "class" @ MSG_TOK_LMID "lmid" @ MSG_TOK_TTIME "ttime" @ MSG_TOK_DTIME "dtime" @ MSG_TOK_OUTFILE "output" @ MSG_TOK_LMID_ALL "ALL" @ MSG_TOK_LMID_ALT "ALT" @ MSG_TOK_LMID_BASE "BASE" @ MSG_TOK_LMID_LDSO "LDSO" # The following strings represent reserved words, files, pathnames and symbols. # Reference to this strings is via the MSG_ORIG() macro, and thus no message # translation is required. @ MSG_STR_EMPTY "" @ MSG_STR_DELIMIT ",:" @ MSG_STR_COMDAT "COMDAT " @ MSG_SCN_GOT ".got" @ MSG_SCN_PLT ".plt" @ MSG_SCN_BSS ".bss" @ MSG_SCN_INIT ".init" @ MSG_SCN_FINI ".fini" @ MSG_SCN_INITARRAY ".initarray" @ MSG_SCN_FINIARRAY ".finiarray" @ MSG_SCN_PREINITARRAY ".preinitarray" @ MSG_SH_INFO "sh_info" @ MSG_SH_LINK "sh_link" @ MSG_UTL_SCC_ENTRY " [%d] %s" @ MSG_FMT_INDEX " [%d]" @ MSG_FMT_INDEX_RANGE " [%d-%d]" @ MSG_FMT_STR "%s" @ MSG_FMT_PATH "%s/%s" @ MSG_PTH_OBJECT "/tmp/ld.so-OBJECT-" @ MSG_SUNW_OST_SGS "SUNW_OST_SGS" # Entrance criteria messages @ MSG_ECR_NAME " ec_name: %s" @ MSG_ECR_FLAGS " ec_flags: %s" @ MSG_ECR_IS_NAME " ec_is_name: %-8s ec_attrmask: %s" @ MSG_ECR_SEGMENT " ec_segment: %-8s ec_attrbits: %s" @ MSG_ECR_NDX " ec_ordndx: %-8d ec_type: %s" @ MSG_ECR_FILES " ec_files:" @ MSG_ECR_FILE " %-21s %s" @ MSG_MAP_SORT_SEG " %s" @ MSG_MAP_SORT_SEG_NAME " %-20s %s" @ MSG_MAP_SORT_SEG_V " %-20s %-20s p_vaddr=0x%llx" @ MSG_MAP_SORT_SEG_O " %-20s %-20s order=%d" # Libs messages @ MSG_LIB_FILE " %s" # PLT binding methods @ MSG_PLT_21D "21d" @ MSG_PLT_24D "24d" @ MSG_PLT_U32 "u32" @ MSG_PLT_U44 "u44" @ MSG_PLT_FULL "full" @ MSG_PLT_FAR "far" # Segment messages @ MSG_SEG_DESC "segment[%d]" @ MSG_SEG_NAME " sg_name: %s" @ MSG_SEG_LENGTH " sg_length: %#llx" @ MSG_SEG_ROUND " sg_round: %#llx" @ MSG_SEG_ALIGN " sg_align: %#llx" @ MSG_SEG_FLAGS " sg_flags: %s" @ MSG_SEG_SIZESYM_TITLE " sg_sizesym:" @ MSG_SEG_SIZESYM " %s" @ MSG_SEG_IS_ORDER_TITLE " sg_is_order:" @ MSG_SEG_OS_ORDER_TITLE " sg_os_order:" @ MSG_SEG_LIST_ITEM " %s" # Section messages (used when expanding segment information) @ MSG_SEC_NAME " section[%d] os_name: %s" # Symbol strings @ MSG_SYM_GLOBAL "global" @ MSG_SYM_LOCAL "local" @ MSG_SYM_COPY "copy rel" @ MSG_SYM_NEXT "[ RTLD_NEXT ]" @ MSG_SYM_DEFAULT "[ RTLD_DEFAULT ]" @ MSG_SYM_SELF "[ RTLD_SELF ]" @ MSG_SYM_PROBE "[ RTLD_PROBE ]" @ MSG_SYM_SINGLETON "( singleton reference )" # Link-map mode strings @ MSG_MODE_GLOBNODEL "[ GLOBAL NODELETE ]" @ MSG_MODE_GLOB "[ GLOBAL ]" @ MSG_MODE_NODEL "[ NODELETE ]" # NOTE: these are used by lari(1), use care when changing. @ MSG_BINFO_START " (" @ MSG_BINFO_DIRECT "direct" @ MSG_BINFO_INTERPOSE "interpose" @ MSG_BINFO_COPYREF "copy-ref" @ MSG_BINFO_FILTEE "filtee" @ MSG_BINFO_PLTADDR "plt-addr" @ MSG_BINFO_END ")" @ MSG_BINFO_SEP "," # Utility messages @ MSG_UTL_EVNT_PREINIT "RD_PREINIT" @ MSG_UTL_EVNT_POSTINIT "RD_POSTINIT" @ MSG_UTL_EVNT_DLACT "RD_DLACTIVITY" @ MSG_UTL_STA_ADD "RT_ADD" @ MSG_UTL_STA_DELETE "RT_DELETE" @ MSG_UTL_STA_CONSIST "RT_CONSISTENT" # Version messages @ MSG_VER_SELECTED " SELECTED %-26.26s %s" @ MSG_VER_L_SELECTED " SELECTED %-26s %s" @ MSG_VER_ALL " ALL %-26.26s" @ MSG_VER_L_ALL " ALL %-26s" # Global offset table entries. @ MSG_GOT_INDEX " [%d]" @ MSG_GOT_SMALL_PIC "pic" @ MSG_GOT_BIG_PIC "PIC" @ MSG_CNTL_ENTRY " [0x%llx] %s" @ MSG_STR_NL "\n" @ MSG_STR_LDVER "Solaris Linkers: %s" @ MSG_FMT_INDEX " [%d]" @ MSG_FMT_ISEC_NAME "[%u]%s" @ MSG_SUNW_OST_SGS "SUNW_OST_SGS" @ MSG_ELF_MAGIC " ei_magic: { 0x%x, %c, %c, %c }" @ MSG_ELF_CLASS " ei_class: %-18s ei_data: %s" @ MSG_ELF_OSABI " ei_osabi: %-18s ei_abiversion: %s" @ MSG_ELF_MACHINE " e_machine: %-18s e_version: %s" @ MSG_ELF_TYPE " e_type: %s" @ MSG_ELF_FLAGS " e_flags: %18s" @ MSG_ELF_FLAGS_FMT " e_flags: %s" @ MSG_ELF_ESIZE " e_entry: %#18llx e_ehsize: %2d \ e_shstrndx: %d" @ MSG_ELFX_ESIZE " e_entry: %#18llx e_ehsize: %2d \ e_shstrndx: SHN_XINDEX (see shdr[0].sh_link)" @ MSG_ELF_SHOFF " e_shoff: %#18llx e_shentsize: %2d \ e_shnum: %d" @ MSG_ELFX_SHOFF " e_shoff: %#18llx e_shentsize: %2d \ e_shnum: 0 (see shdr[0].sh_size)" @ MSG_ELF_PHOFF " e_phoff: %#18llx e_phentsize: %2d \ e_phnum: %d" @ MSG_ELFX_PHOFF " e_phoff: %#18llx e_phentsize: %2d \ e_phnum: PN_XNUM (see shdr[0].sh_info)" # Shdr[0] messages @ MSG_SHD0_TITLE "Section Header[0]: (ELF Ehdr extensions)" @ MSG_SHD0_ADDR " sh_addr: %-6lld sh_flags: %s" @ MSG_SHD0_SIZE " sh_size: %-6lld (e_shnum) sh_type: %s" @ MSG_SHD0_OFFSET " sh_offset: %-6lld \ sh_entsize: %lld" @ MSG_SHD0_LINK " sh_link: %-6d (e_shstrndx) sh_info: \ %d (e_phnum)" @ MSG_SHD0_ALIGN " sh_addralign: %-6lld" # Section header messages @ MSG_SHD_ADDR_32 " sh_addr: %#-10llx sh_flags: %s" @ MSG_SHD_SIZE_32 " sh_size: %#-10llx sh_type: %s" @ MSG_SHD_OFFSET_32 " sh_offset: %#-10llx sh_entsize: %#llx" @ MSG_SHD_OFFSET_ENT_32 " sh_offset: %#-10llx sh_entsize: %#llx \ (%lld %s)" @ MSG_SHD_LINK_32 " sh_link: %-14s sh_info: %s" @ MSG_SHD_ALIGN_32 " sh_addralign: %#-10llx" @ MSG_SHD_ADDR_64 " sh_addr: %#-18llx sh_flags: %s" @ MSG_SHD_SIZE_64 " sh_size: %#-18llx sh_type: %s" @ MSG_SHD_OFFSET_64 " sh_offset: %#-18llx sh_entsize: %#llx" @ MSG_SHD_OFFSET_ENT_64 " sh_offset: %#-18llx sh_entsize: %#llx \ (%lld %s)" @ MSG_SHD_LINK_64 " sh_link: %-18s sh_info: %s" @ MSG_SHD_ALIGN_64 " sh_addralign: %#-18llx" # Program header messages @ MSG_PHD_VADDR_32 " p_vaddr: %#-10llx p_flags: %s" @ MSG_PHD_PADDR_32 " p_paddr: %#-10llx p_type: %s" @ MSG_PHD_FILESZ_32 " p_filesz: %#-10llx p_memsz: %#llx" @ MSG_PHD_OFFSET_32 " p_offset: %#-10llx p_align: %#llx" @ MSG_PHD_VADDR_64 " p_vaddr: %#-18llx p_flags: %s" @ MSG_PHD_PADDR_64 " p_paddr: %#-18llx p_type: %s" @ MSG_PHD_FILESZ_64 " p_filesz: %#-18llx p_memsz: %#llx" @ MSG_PHD_OFFSET_64 " p_offset: %#-18llx p_align: %#llx" # Syminfo formats @ MSG_SYMINFO_UNKFLAG "[0x%x]" # Lc_interface interface tags. @ MSG_CI_NULL "NULL" @ MSG_CI_VERSION "VERSION" @ MSG_CI_ATEXIT "ATEXIT" @ MSG_CI_LCMESSAGES "LCMESSAGES" @ MSG_CI_BIND_GUARD "BIND_GUARD" @ MSG_CI_BIND_CLEAR "BIND_CLEAR" @ MSG_CI_THR_SELF "THR_SELF" @ MSG_CI_TLS_MODADD "TLS_MODADD" @ MSG_CI_TLS_MODREM "TLS_MODREM" @ MSG_CI_TLS_STATMOD "TLS_STATMOD" @ MSG_CI_THRINIT "THRINIT" @ MSG_CI_CRITICAL "CRITICAL" # TLS information flags @ MSG_TLS_FLAG_STATIC "STATIC-TLS" # mmapobj() mr_flags. @ MSG_MR_PADDING "[ PADDING ]" @ MSG_MR_HDR_ELF "[ HDR_ELF ]" @ MSG_MR_HDR_AOUT "[ HDR_AOUT ]"