/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * ldapclient command. To make (initiailize) or uninitialize a machines as * and LDAP client. This command MUST be run as root (or it will simply exit). * * -I Install. No file_backup/recover for installing only (no doc). * * init Initialze (create) an LDAP client from a profile stored * in a directory-server. * manual Initialze (create) an LDAP client by hand (-file option * reads from file). * mod Modify the LDAP client configuration on this machine by hand. * list List the contents of the LDAP client cache files. * uninit Uninitialize this machine. * * -v Verbose flag. * -q Quiet flag (mutually exclusive with -v). * * -a attrName=attrVal * can be one of the following: * * attributeMap * Attribute map. Can be multiple instances of this option. * (no former option) * authenticationMethod * Authentication method (formerly -a) * bindTimeLimit * Bind time limit. (no former option) * certificatePath * Path to certificates used for secure bind (no former option) * credentialLevel * Client credential level (no former option) * defaultServerList * Default server (no former option) Refer to DUA Config * Schema draft. * defaultSearchBase * Search Base DN. e.g. dc=eng,dc=sun,dc=com (formerly -b) * defaultSearchScope * Search scope. (formerly -s) * domainName * Hosts lookup domain (DNS) Ex. eng.sun.com (formerly -d) * followReferrals * Search dereference. followref or noref (default followref) * (formerly -r) * objectclassMap * Objectclass map. Can be multiple instances of this option. * (no former option) * preferredServerList * Server preference list. Comma ',' seperated list of IPaddr. * (formerly -p) * profileName * Profile name to use for init (ldapclient) or * generate (gen_profile). (formerly -P) * profileTTL * Client info TTL. If set to 0 this information will not be * automatically updated by the ldap_cachemgr(1M). * (formerly -e) * proxyDN * Binding DN. Ex. cn=client,ou=people,cd=eng,dc=sun,dc=com * (formerly -D) * proxyPassword * Client password not needed for authentication "none". * (formerly -w) * searchTimeLimit * Timeout value. (formerly -o) * serviceSearchDescriptor * Service search scope. (no former option) * serviceAuthenticationMethod * Service authenticaion method (no former option) * serviceCredentialLevel * Service credential level (no former option) * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "standalone.h" #if !defined(TEXT_DOMAIN) #define TEXT_DOMAIN "SUNW_OST_OSCMD" #endif /* error codes */ /* The manpage doc only allows for SUCCESS(0), FAIL(1) and CRED(2) on exit */ #define CLIENT_SUCCESS 0 #define CLIENT_ERR_PARSE -1 #define CLIENT_ERR_FAIL 1 #define CLIENT_ERR_CREDENTIAL 2 #define CLIENT_ERR_MEMORY 3 #define CLIENT_ERR_RESTORE 4 #define CLIENT_ERR_RENAME 5 #define CLIENT_ERR_RECOVER 6 #define CLIENT_ERR_TIMEDOUT 7 #define CLIENT_ERR_MAINTENANCE 8 /* Reset flag for start_services() */ #define START_INIT 1 #define START_RESET 2 #define START_UNINIT 3 /* Reset flag for stop_services() */ #define STATE_NOSAVE 0 #define STATE_SAVE 1 /* files to (possibiliy) restore */ #define LDAP_RESTORE_DIR "/var/ldap/restore" #define DOMAINNAME_DIR "/etc" #define DOMAINNAME_FILE "defaultdomain" #define DOMAINNAME DOMAINNAME_DIR "/" DOMAINNAME_FILE #define DOMAINNAME_BACK LDAP_RESTORE_DIR "/" DOMAINNAME_FILE #define NSSWITCH_DIR "/etc" #define NSSWITCH_FILE "nsswitch.conf" #define NSSWITCH_CONF NSSWITCH_DIR "/" NSSWITCH_FILE #define NSSWITCH_BACK LDAP_RESTORE_DIR "/" NSSWITCH_FILE #define NSSWITCH_LDAP "/etc/nsswitch.ldap" #define NIS_COLDSTART_DIR "/var/nis" #define NIS_COLDSTART_FILE "NIS_COLD_START" #define NIS_COLDSTART NIS_COLDSTART_DIR "/" NIS_COLDSTART_FILE #define NIS_COLDSTART_BACK LDAP_RESTORE_DIR "/" NIS_COLDSTART_FILE #define YP_BIND_DIR "/var/yp/binding" /* Define the service FMRIs */ #define SENDMAIL_FMRI "network/smtp:sendmail" #define NSCD_FMRI "system/name-service-cache:default" #define AUTOFS_FMRI "system/filesystem/autofs:default" #define LDAP_FMRI "network/ldap/client:default" #define NISD_FMRI "network/rpc/nisplus:default" #define YP_FMRI "network/nis/client:default" #define NS_MILESTONE_FMRI "milestone/name-services:default" /* Define flags for checking if services were enabled */ #define SENDMAIL_ON 0x1 #define NSCD_ON 0x10 #define AUTOFS_ON 0x100 #define CMD_DOMAIN_START "/usr/bin/domainname" /* Command to copy files */ #define CMD_CP "/bin/cp -f" #define CMD_MV "/bin/mv -f" #define CMD_RM "/bin/rm -f" #define TO_DEV_NULL " >/dev/null 2>&1" /* Files that need to be just removed */ #define NIS_PRIVATE_CACHE "/var/nis/.NIS_PRIVATE_DIRCACHE" #define NIS_SHARED_CACHE "/var/nis/NIS_SHARED_DIRCACHE" #define NIS_CLIENT_INFO "/var/nis/client_info" #define LDAP_CACHE_LOG "/var/ldap/cachemgr.log" /* Output defines to supress if quiet mode set */ #define CLIENT_FPUTS if (!mode_quiet) (void) fputs #define CLIENT_FPRINTF if (!mode_quiet) (void) fprintf #define CLIENT_FPUTC if (!mode_quiet) (void) fputc #define restart_service(fmri, waitflag)\ do_service(fmri, waitflag, RESTART_SERVICE,\ SCF_STATE_STRING_ONLINE) #define start_service(fmri, waitflag) \ do_service(fmri, waitflag, START_SERVICE,\ SCF_STATE_STRING_ONLINE) #define disable_service(fmri, waitflag) \ do_service(fmri, waitflag, STOP_SERVICE,\ SCF_STATE_STRING_DISABLED) /* * There isn't a domainName defined as a param, so we set a value here * (1001) should be big enough */ #define LOCAL_DOMAIN_P 1001 #define START_SERVICE 1 #define STOP_SERVICE 2 #define RESTART_SERVICE 3 #define DEFAULT_TIMEOUT 60000000 #define INIT_WAIT_USECS 50000 /* Used to turn off profile checking */ #define CACHETTL_OFF "0" /* Globals */ static char *cmd; static char *dname = NULL; static char dname_buf[BUFSIZ]; static boolean_t sysid_install = B_FALSE; static int mode_verbose = 0; static int mode_quiet = 0; static int gen = 0; static int gStartLdap = 0; static int gStartYp = 0; static int gStartNisd = 0; static int enableFlag = 0; /* multival_t is used to hold params that can have more than one value */ typedef struct { int count; char **optlist; } multival_t; static multival_t *multival_new(); static int multival_add(multival_t *list, char *opt); static void multival_free(multival_t *list); /* * clientopts_t is used to hold and pass around the param values from * the cmd line */ typedef struct { multival_t *attributeMap; char *authenticationMethod; char *bindTimeLimit; char *certificatePath; char *credentialLevel; char *defaultSearchBase; char *defaultServerList; char *domainName; char *followReferrals; multival_t *objectclassMap; char *preferredServerList; char *profileName; char *profileTTL; char *proxyDN; char *proxyPassword; char *bindDN; char *bindPasswd; char *defaultSearchScope; char *searchTimeLimit; multival_t *serviceAuthenticationMethod; multival_t *serviceCredentialLevel; multival_t *serviceSearchDescriptor; } clientopts_t; static clientopts_t *clientopts_new(); static void clientopts_free(clientopts_t *list); extern ns_ldap_error_t *__ns_ldap_print_config(int); extern void __ns_ldap_default_config(); extern int __ns_ldap_download(const char *, char *, char *, ns_ldap_error_t **); /* Function prototypes (these could be static) */ static void usage(void); static int credCheck(clientopts_t *arglist); static int clientSetParam(clientopts_t *optlist, int paramFlag, char *attrVal); static int parseParam(char *param, char **paramVal); static void dumpargs(clientopts_t *arglist); static int num_args(clientopts_t *arglist); static int file_backup(void); static int recover(int saveState); static int mod_backup(void); static int mod_recover(void); static void mod_cleanup(void); static int client_list(clientopts_t *arglist); static int client_manual(clientopts_t *arglist); static int client_mod(clientopts_t *arglist); static int client_uninit(clientopts_t *arglist); static int client_genProfile(clientopts_t *arglist); static int client_init(clientopts_t *arglist); static int file_move(const char *from, const char *to); static int start_services(int flag); static int stop_services(int saveState); static boolean_t is_service(const char *fmri, const char *state); static int wait_till(const char *fmri, const char *state, useconds_t max, const char *what, boolean_t check_maint); static int do_service(const char *fmri, boolean_t waitflag, int dowhat, const char *state); static useconds_t get_timeout_value(int dowhat, const char *fmri, useconds_t default_val); int main(int argc, char **argv) { char *ret_locale, *ret_textdomain; int retcode; int paramFlag; char *attrVal; int sysinfostatus; clientopts_t *optlist = NULL; int op_manual = 0, op_mod = 0, op_uninit = 0; int op_list = 0, op_init = 0, op_genprofile = 0; extern char *optarg; extern int optind; int option; ret_locale = setlocale(LC_ALL, ""); if (ret_locale == NULL) { CLIENT_FPUTS(gettext("Unable to set locale.\n"), stderr); } ret_textdomain = textdomain(TEXT_DOMAIN); if (ret_textdomain == NULL) { CLIENT_FPUTS(gettext("Unable to set textdomain.\n"), stderr); } openlog("ldapclient", LOG_PID, LOG_USER); /* get name that invoked us */ if (cmd = strrchr(argv[0], '/')) ++cmd; else cmd = argv[0]; sysinfostatus = sysinfo(SI_SRPC_DOMAIN, dname_buf, BUFSIZ); if (0 < sysinfostatus) dname = &dname_buf[0]; optlist = clientopts_new(); if (optlist == NULL) { CLIENT_FPUTS( gettext("Error getting optlist (malloc fail)\n"), stderr); exit(CLIENT_ERR_FAIL); } optind = 1; while (optind < argc) { option = getopt(argc, argv, "vqa:ID:w:j:y:"); switch (option) { case 'v': mode_verbose = 1; break; case 'q': mode_quiet = 1; break; case 'a': attrVal = NULL; paramFlag = parseParam(optarg, &attrVal); if (paramFlag == CLIENT_ERR_PARSE) { CLIENT_FPRINTF(stderr, gettext("Unrecognized " "parameter \"%s\"\n"), optarg); usage(); exit(CLIENT_ERR_FAIL); } if (paramFlag == NS_LDAP_BINDPASSWD_P && optlist->proxyPassword != NULL) { (void) fprintf(stderr, gettext("The -a proxyPassword option is " "mutually exclusive of -y. " "-a proxyPassword is ignored.\n")); break; } retcode = clientSetParam(optlist, paramFlag, attrVal); if (retcode != CLIENT_SUCCESS) { CLIENT_FPRINTF( stderr, gettext("Error (%d) setting " "param \"%s\"\n"), retcode, optarg); usage(); exit(CLIENT_ERR_FAIL); } break; case 'D': optlist->bindDN = strdup(optarg); break; case 'w': if (optlist->bindPasswd != NULL) { CLIENT_FPRINTF(stderr, gettext("The -w option is mutually " "exclusive of -j. -w is ignored.")); break; } if (optarg[0] == '-' && optarg[1] == '\0') { /* Ask for a password later */ break; } optlist->bindPasswd = strdup(optarg); break; case 'j': if (optlist->bindPasswd != NULL) { (void) fprintf(stderr, gettext("The -w option is mutually " "exclusive of -j. -w is ignored.\n")); free(optlist->bindPasswd); } optlist->bindPasswd = readPwd(optarg); if (optlist->bindPasswd == NULL) { exit(CLIENT_ERR_FAIL); } break; case 'y': if (optlist->proxyPassword != NULL) { (void) fprintf(stderr, gettext("The -a proxyPassword option is " "mutually exclusive of -y. " "-a proxyPassword is ignored.\n")); free(optlist->proxyPassword); } optlist->proxyPassword = readPwd(optarg); if (optlist->proxyPassword == NULL) { exit(CLIENT_ERR_FAIL); } break; case EOF: if (strcmp(argv[optind], "init") == 0) { op_init = 1; } else if (strcmp(argv[optind], "manual") == 0) { op_manual = 1; } else if (strcmp(argv[optind], "mod") == 0) { op_mod = 1; } else if (strcmp(argv[optind], "list") == 0) { op_list = 1; } else if (strcmp(argv[optind], "uninit") == 0) { op_uninit = 1; } else if (strcmp(argv[optind], "genprofile") == 0) { gen = 1; op_genprofile = 1; } else if (optind == argc-1) { retcode = clientSetParam( optlist, NS_LDAP_SERVERS_P, argv[optind]); /* ipAddr */ if (retcode != CLIENT_SUCCESS) { CLIENT_FPRINTF( stderr, gettext("Error (%d) setting " "serverList param.\n"), retcode); usage(); exit(CLIENT_ERR_FAIL); } } else { CLIENT_FPUTS( gettext("Error parsing " "command line\n"), stderr); usage(); exit(CLIENT_ERR_FAIL); } optind++; /* get past the verb and keep trying */ break; /* Backwards compatibility to support system install */ case 'I': sysid_install = B_TRUE; op_init = 1; mode_quiet = 1; break; case '?': usage(); CLIENT_FPUTS(gettext("\nOr\n\n"), stderr); gen = 1; usage(); exit(CLIENT_ERR_FAIL); break; } } if ((getuid() != 0) && (!op_genprofile)) { (void) puts( "You must be root (SuperUser) to run this command."); usage(); exit(CLIENT_ERR_FAIL); } /* * All command line arguments are finished being parsed now */ /* *** Do semantic checking here *** */ /* if gen and no no searchBase then err */ if (gen && !optlist->defaultSearchBase) { CLIENT_FPUTS( gettext("ldapclient: Missing required attrName " "defaultSearchBase\n"), stderr); usage(); clientopts_free(optlist); exit(CLIENT_ERR_FAIL); } /* Only one verb can be specified */ if ((op_init + op_manual + op_mod + op_uninit + op_list + op_genprofile) != 1) { usage(); clientopts_free(optlist); exit(CLIENT_ERR_FAIL); } /* *** We passed semantic checking, so now do the operation *** */ if (mode_verbose) { CLIENT_FPUTS(gettext("Arguments parsed:\n"), stderr); dumpargs(optlist); } /* handle "ldapclient list" here. err checking done in func */ if (op_list) { if (mode_verbose) CLIENT_FPUTS( gettext("Handling list option\n"), stderr); retcode = client_list(optlist); } /* handle "ldapclient uninit" here */ if (op_uninit) { if (mode_verbose) CLIENT_FPUTS( gettext("Handling uninit option\n"), stderr); retcode = client_uninit(optlist); } /* handle "ldapclient init" (profile) */ if (op_init) { if (mode_verbose) CLIENT_FPUTS( gettext("Handling init option\n"), stderr); retcode = client_init(optlist); } /* handle "genprofile" here */ if (op_genprofile) { if (mode_verbose) CLIENT_FPUTS( gettext("Handling genProfile\n"), stderr); retcode = client_genProfile(optlist); } /* handle "ldapclient manual" here */ if (op_manual) { if (mode_verbose) CLIENT_FPUTS( gettext("Handling manual option\n"), stderr); retcode = client_manual(optlist); } /* handle "ldapclient mod" here */ if (op_mod) { if (mode_verbose) CLIENT_FPUTS( gettext("Handling mod option\n"), stderr); retcode = client_mod(optlist); } clientopts_free(optlist); if ((retcode == CLIENT_SUCCESS) || (retcode == CLIENT_ERR_FAIL) || (retcode == CLIENT_ERR_CREDENTIAL)) return (retcode); else return (CLIENT_ERR_FAIL); } static int client_list(clientopts_t *arglist) { ns_ldap_error_t *errorp; int retcode = CLIENT_SUCCESS; if (num_args(arglist) > 0) { CLIENT_FPUTS( gettext("No args supported with \"list\" option\n"), stderr); usage(); return (CLIENT_ERR_FAIL); /* exit code here ? */ } if ((errorp = __ns_ldap_print_config(mode_verbose)) != NULL) { retcode = CLIENT_ERR_FAIL; CLIENT_FPUTS( gettext("Cannot get print configuration\n"), stderr); CLIENT_FPUTS(errorp->message, stderr); (void) __ns_ldap_freeError(&errorp); CLIENT_FPUTC('\n', stderr); } return (retcode); } static int client_uninit(clientopts_t *arglist) { int retcode = CLIENT_SUCCESS; ns_ldap_self_gssapi_config_t config = NS_LDAP_SELF_GSSAPI_CONFIG_NONE; if (mode_verbose) { CLIENT_FPUTS( gettext("Restoring machine to previous " "configuration state\n"), stderr); } if (num_args(arglist) > 0) { CLIENT_FPUTS( gettext("No args supported with \"uninit\" option\n"), stderr); usage(); return (CLIENT_ERR_FAIL); } (void) __ns_ldap_self_gssapi_config(&config); retcode = stop_services(STATE_SAVE); if (config != NS_LDAP_SELF_GSSAPI_CONFIG_NONE) (void) system("/usr/sbin/cryptoadm enable metaslot"); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Errors stopping network services.\n"), stderr); /* restart whatever services we can */ (void) start_services(START_RESET); return (CLIENT_ERR_FAIL); } retcode = recover(STATE_SAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Cannot recover the configuration on " "this machine.\n"), stderr); (void) start_services(START_RESET); } else { retcode = start_services(START_UNINIT); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Config restored but problems " "encountered resetting network " "services.\n"), stderr); } } if (retcode == CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("System successfully recovered\n"), stderr); } return (retcode); } /* * The following macro is used to do a __ns_ldap_setParam(). * On every call, the return code is checked, and if there was * a problem then the error message is printed, the ldaperr * is freed and we return from the function with the offending * error return code. This macro keeps us from having to * repeat this code for every call to setParam as was done * in the previous incarnation of ldapclient. * * assumes a "retcode" variable is available for status */ #define LDAP_SET_PARAM(argval, argdef) \ retcode = 0; \ if (NULL != argval) { \ ns_ldap_error_t *ldaperr; \ retcode = __ns_ldap_setParam(argdef, (void *)argval, &ldaperr); \ if (retcode != NS_LDAP_SUCCESS) { \ if (NULL != ldaperr) { \ CLIENT_FPUTS(ldaperr->message, stderr); \ CLIENT_FPUTC('\n', stderr); \ (void) __ns_ldap_freeError(&ldaperr); \ } \ return (retcode ? CLIENT_ERR_FAIL : CLIENT_SUCCESS); \ } \ } /* * The following macro is used to check if an arg has already been set * and issues an error message, a usage message and then returns an error. * This was made into a macro to avoid the duplication of this code many * times in the function below. */ #define LDAP_CHECK_INVALID(arg, param) \ if (arg) { \ CLIENT_FPRINTF(stderr, gettext("Invalid parameter (%s) " \ "specified\n"), param); \ usage(); \ return (CLIENT_ERR_FAIL); \ } static int client_manual(clientopts_t *arglist) { int counter; int domain_fp; ns_ldap_error_t *errorp; int ret_copy; int reset_ret; int retcode = CLIENT_SUCCESS; if (dname == NULL) { CLIENT_FPUTS( gettext("Manual failed: System domain not set and " "no domainName specified.\n"), stderr); return (CLIENT_ERR_FAIL); } if (arglist->defaultSearchBase == NULL) { CLIENT_FPUTS( gettext("Manual failed: Missing required " "defaultSearchBase attribute.\n"), stderr); return (CLIENT_ERR_FAIL); } if ((arglist->defaultServerList == NULL) && (arglist->preferredServerList == NULL)) { CLIENT_FPUTS( gettext("Manual failed: Missing required " "defaultServerList or preferredServerList " "attribute.\n"), stderr); return (CLIENT_ERR_FAIL); } if (arglist->profileTTL != NULL) { CLIENT_FPUTS( gettext("Manual aborted: profileTTL is not supported " "in manual mode.\n"), stderr); return (CLIENT_ERR_FAIL); } if (arglist->profileName != NULL) { CLIENT_FPUTS( gettext("Manual aborted: profileName is not supported " "in manual mode.\n"), stderr); return (CLIENT_ERR_FAIL); } LDAP_CHECK_INVALID(arglist->bindDN, "bind DN"); LDAP_CHECK_INVALID(arglist->bindPasswd, "bind password"); __ns_ldap_setServer(TRUE); /* Need this for _ns_setParam() */ __ns_ldap_default_config(); /* Set version to latest (not version 1) */ LDAP_SET_PARAM(NS_LDAP_VERSION, NS_LDAP_FILE_VERSION_P); /* Set profileTTL to 0 since NO profile on manual */ LDAP_SET_PARAM(CACHETTL_OFF, NS_LDAP_CACHETTL_P); /* Set additional valid params from command line */ LDAP_SET_PARAM(arglist->authenticationMethod, NS_LDAP_AUTH_P); LDAP_SET_PARAM(arglist->defaultSearchBase, NS_LDAP_SEARCH_BASEDN_P); LDAP_SET_PARAM(arglist->credentialLevel, NS_LDAP_CREDENTIAL_LEVEL_P); LDAP_SET_PARAM(arglist->proxyDN, NS_LDAP_BINDDN_P); LDAP_SET_PARAM(arglist->searchTimeLimit, NS_LDAP_SEARCH_TIME_P); LDAP_SET_PARAM(arglist->preferredServerList, NS_LDAP_SERVER_PREF_P); LDAP_SET_PARAM(arglist->profileName, NS_LDAP_PROFILE_P); LDAP_SET_PARAM(arglist->followReferrals, NS_LDAP_SEARCH_REF_P); LDAP_SET_PARAM(arglist->defaultSearchScope, NS_LDAP_SEARCH_SCOPE_P); LDAP_SET_PARAM(arglist->bindTimeLimit, NS_LDAP_BIND_TIME_P); LDAP_SET_PARAM(arglist->proxyPassword, NS_LDAP_BINDPASSWD_P); LDAP_SET_PARAM(arglist->defaultServerList, NS_LDAP_SERVERS_P); LDAP_SET_PARAM(arglist->certificatePath, NS_LDAP_HOST_CERTPATH_P); for (counter = 0; counter < arglist->serviceAuthenticationMethod->count; counter++) { LDAP_SET_PARAM( arglist->serviceAuthenticationMethod->optlist[counter], NS_LDAP_SERVICE_AUTH_METHOD_P); } for (counter = 0; counter < arglist->serviceCredentialLevel->count; counter++) { LDAP_SET_PARAM( arglist->serviceCredentialLevel->optlist[counter], NS_LDAP_SERVICE_CRED_LEVEL_P); } for (counter = 0; counter < arglist->objectclassMap->count; counter++) { LDAP_SET_PARAM(arglist->objectclassMap->optlist[counter], NS_LDAP_OBJECTCLASSMAP_P); } for (counter = 0; counter < arglist->attributeMap->count; counter++) { LDAP_SET_PARAM(arglist->attributeMap->optlist[counter], NS_LDAP_ATTRIBUTEMAP_P); } for (counter = 0; counter < arglist->serviceSearchDescriptor->count; counter++) { LDAP_SET_PARAM( arglist->serviceSearchDescriptor->optlist[counter], NS_LDAP_SERVICE_SEARCH_DESC_P); } retcode = credCheck(arglist); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Error in setting up credentials\n"), stderr); return (retcode); } if (mode_verbose) CLIENT_FPUTS( gettext("About to modify this machines " "configuration by writing the files\n"), stderr); /* get ready to start playing with files */ retcode = stop_services(STATE_SAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Errors stopping network services.\n"), stderr); return (CLIENT_ERR_FAIL); } /* Save orig versions of files */ retcode = file_backup(); if (retcode == CLIENT_ERR_RESTORE) { CLIENT_FPUTS( gettext("System not in state to enable ldap client.\n"), stderr); reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (retcode); } else if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Save of system configuration failed! " "Attempting recovery.\n"), stderr); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); return (retcode); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (retcode); } /* Dump new files */ errorp = __ns_ldap_DumpConfiguration(NSCONFIGFILE); if (errorp != NULL) { CLIENT_FPRINTF(stderr, gettext("%s manual: errorp is not NULL; %s\n"), cmd, errorp->message); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); return (retcode); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } (void) __ns_ldap_freeError(&errorp); return (CLIENT_ERR_FAIL); } /* if (credargs(arglist)) */ errorp = __ns_ldap_DumpConfiguration(NSCREDFILE); if (errorp != NULL) { CLIENT_FPRINTF(stderr, gettext("%s init: errorp is not NULL; %s\n"), cmd, errorp->message); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); return (retcode); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } (void) __ns_ldap_freeError(&errorp); return (CLIENT_ERR_FAIL); } ret_copy = system(CMD_CP " " NSSWITCH_LDAP " " NSSWITCH_CONF); if (ret_copy != 0) { CLIENT_FPRINTF(stderr, gettext("Error %d copying (%s) -> (%s)\n"), ret_copy, NSSWITCH_LDAP, NSSWITCH_CONF); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } if ((domain_fp = open(DOMAINNAME, O_WRONLY|O_CREAT|O_TRUNC, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) == -1) { /* 0644 */ CLIENT_FPRINTF(stderr, gettext("Cannot open %s\n"), DOMAINNAME); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); return (CLIENT_ERR_FAIL); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } (void) write(domain_fp, dname, strlen(dname)); (void) write(domain_fp, "\n", 1); (void) close(domain_fp); retcode = start_services(START_INIT); if (retcode == CLIENT_SUCCESS) { CLIENT_FPUTS(gettext("System successfully configured\n"), stderr); } else { CLIENT_FPUTS(gettext("Error resetting system.\n" "Recovering old system settings.\n"), stderr), /* stop any started services for recover */ /* don't stomp on history of saved services state */ reset_ret = stop_services(STATE_NOSAVE); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "stopping services during reset\n"), reset_ret); /* Coninue and try to recover what we can */ } reset_ret = recover(STATE_NOSAVE); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "recovering service files during " "reset\n"), reset_ret); /* Continue and start what we can */ } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } } return (retcode); } static int client_mod(clientopts_t *arglist) { int counter; int domain_fp; ns_ldap_error_t *errorp; int reset_ret; int retcode = CLIENT_SUCCESS; __ns_ldap_setServer(TRUE); /* Need this for _ns_setParam() */ if ((errorp = __ns_ldap_LoadConfiguration()) != NULL) { CLIENT_FPUTS(gettext("Cannot get load configuration\n"), stderr); CLIENT_FPUTS(errorp->message, stderr); CLIENT_FPUTC('\n', stderr); (void) __ns_ldap_freeError(&errorp); return (CLIENT_ERR_FAIL); } if (arglist->profileTTL != NULL) { CLIENT_FPUTS( gettext("Mod aborted: profileTTL modification is " "not allowed in mod mode.\n"), stderr); return (CLIENT_ERR_FAIL); } if (arglist->profileName != NULL) { CLIENT_FPUTS( gettext("Mod aborted: profileName modification is " "not allowed. If you want to use profiles " "generate one with genProfile and load it " "on the server with ldapadd.\n"), stderr); return (CLIENT_ERR_FAIL); } LDAP_CHECK_INVALID(arglist->bindDN, "bind DN"); LDAP_CHECK_INVALID(arglist->bindPasswd, "bind password"); /* Set additional valid params from command line */ LDAP_SET_PARAM(arglist->authenticationMethod, NS_LDAP_AUTH_P); LDAP_SET_PARAM(arglist->defaultSearchBase, NS_LDAP_SEARCH_BASEDN_P); LDAP_SET_PARAM(arglist->credentialLevel, NS_LDAP_CREDENTIAL_LEVEL_P); LDAP_SET_PARAM(arglist->proxyDN, NS_LDAP_BINDDN_P); LDAP_SET_PARAM(arglist->profileTTL, NS_LDAP_CACHETTL_P); LDAP_SET_PARAM(arglist->searchTimeLimit, NS_LDAP_SEARCH_TIME_P); LDAP_SET_PARAM(arglist->preferredServerList, NS_LDAP_SERVER_PREF_P); LDAP_SET_PARAM(arglist->profileName, NS_LDAP_PROFILE_P); LDAP_SET_PARAM(arglist->followReferrals, NS_LDAP_SEARCH_REF_P); LDAP_SET_PARAM(arglist->defaultSearchScope, NS_LDAP_SEARCH_SCOPE_P); LDAP_SET_PARAM(arglist->bindTimeLimit, NS_LDAP_BIND_TIME_P); LDAP_SET_PARAM(arglist->proxyPassword, NS_LDAP_BINDPASSWD_P); LDAP_SET_PARAM(arglist->defaultServerList, NS_LDAP_SERVERS_P); LDAP_SET_PARAM(arglist->certificatePath, NS_LDAP_HOST_CERTPATH_P); for (counter = 0; counter < arglist->serviceAuthenticationMethod->count; counter++) { LDAP_SET_PARAM( arglist->serviceAuthenticationMethod->optlist[counter], NS_LDAP_SERVICE_AUTH_METHOD_P); } for (counter = 0; counter < arglist->serviceCredentialLevel->count; counter++) { LDAP_SET_PARAM( arglist->serviceCredentialLevel->optlist[counter], NS_LDAP_SERVICE_CRED_LEVEL_P); } for (counter = 0; counter < arglist->objectclassMap->count; counter++) { LDAP_SET_PARAM( arglist->objectclassMap->optlist[counter], NS_LDAP_OBJECTCLASSMAP_P); } for (counter = 0; counter < arglist->attributeMap->count; counter++) { LDAP_SET_PARAM( arglist->attributeMap->optlist[counter], NS_LDAP_ATTRIBUTEMAP_P); } for (counter = 0; counter < arglist->serviceSearchDescriptor->count; counter++) { LDAP_SET_PARAM( arglist->serviceSearchDescriptor->optlist[counter], NS_LDAP_SERVICE_SEARCH_DESC_P); } retcode = credCheck(arglist); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Error in setting up credentials\n"), stderr); return (retcode); } if (mode_verbose) CLIENT_FPUTS( gettext("About to modify this machines configuration " "by writing the files\n"), stderr); /* get ready to start playing with files */ retcode = stop_services(STATE_SAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Errors stopping network services.\n"), stderr); return (CLIENT_ERR_FAIL); } /* Temporarily save orig versions of files */ retcode = mod_backup(); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Unable to backup the ldap client files!\n"), stderr); return (retcode); } /* Dump new files */ errorp = __ns_ldap_DumpConfiguration(NSCONFIGFILE); if (errorp != NULL) { CLIENT_FPRINTF(stderr, gettext("%s mod: errorp is not NULL; %s\n"), cmd, errorp->message); retcode = mod_recover(); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); } (void) __ns_ldap_freeError(&errorp); reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } /* if (credargs(arglist)) */ errorp = __ns_ldap_DumpConfiguration(NSCREDFILE); if (errorp != NULL) { CLIENT_FPRINTF(stderr, gettext("%s mod: errorp is not NULL; %s\n"), cmd, errorp->message); retcode = mod_recover(); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); } (void) __ns_ldap_freeError(&errorp); reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } if ((domain_fp = open(DOMAINNAME, O_WRONLY|O_CREAT|O_TRUNC, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) == -1) { /* 0644 */ CLIENT_FPRINTF(stderr, gettext("Cannot open %s\n"), DOMAINNAME); retcode = mod_recover(); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed! Machine needs to be " "fixed!\n"), stderr); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } (void) write(domain_fp, dname, strlen(dname)); (void) write(domain_fp, "\n", 1); (void) close(domain_fp); retcode = start_services(START_INIT); if (retcode == CLIENT_SUCCESS) { CLIENT_FPUTS(gettext("System successfully configured\n"), stderr); } else { CLIENT_FPUTS(gettext("Error resetting system.\n" "Recovering old system settings.\n"), stderr), /* stop any started services for recover */ /* don't stomp on history of saved services state */ reset_ret = stop_services(STATE_NOSAVE); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "stopping services during reset\n"), reset_ret); /* Coninue and try to recover what we can */ } reset_ret = mod_recover(); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "recovering service files during " "reset\n"), reset_ret); /* Continue and start what we can */ } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } } /* Cleanup temporary files created by mod_backup() */ mod_cleanup(); return (retcode); } static int client_genProfile(clientopts_t *arglist) { int counter; int retcode; /* required for LDAP_SET_PARAM macro */ ns_ldap_error_t *errorp; if (mode_verbose) CLIENT_FPUTS(gettext("About to generate a profile\n"), stderr); /* *** Check for invalid args *** */ LDAP_CHECK_INVALID(arglist->proxyDN, "proxyDN"); LDAP_CHECK_INVALID(arglist->proxyPassword, "proxyPassword"); LDAP_CHECK_INVALID(arglist->certificatePath, "certificatePath"); LDAP_CHECK_INVALID(arglist->domainName, "domainName"); LDAP_CHECK_INVALID(arglist->bindDN, "bind DN"); LDAP_CHECK_INVALID(arglist->bindPasswd, "bind password"); /* *** End check for invalid args *** */ if (arglist->profileName == NULL) { if (mode_verbose) CLIENT_FPUTS( gettext("No profile specified. " "Using \"default\"\n"), stderr); arglist->profileName = "default"; } __ns_ldap_setServer(TRUE); __ns_ldap_default_config(); /* Set version to latest (not version 1) */ LDAP_SET_PARAM(NS_LDAP_VERSION, NS_LDAP_FILE_VERSION_P); /* Set additional valid params from command line */ LDAP_SET_PARAM(arglist->authenticationMethod, NS_LDAP_AUTH_P); LDAP_SET_PARAM(arglist->defaultSearchBase, NS_LDAP_SEARCH_BASEDN_P); LDAP_SET_PARAM(arglist->credentialLevel, NS_LDAP_CREDENTIAL_LEVEL_P); LDAP_SET_PARAM(arglist->profileTTL, NS_LDAP_CACHETTL_P); LDAP_SET_PARAM(arglist->searchTimeLimit, NS_LDAP_SEARCH_TIME_P); LDAP_SET_PARAM(arglist->preferredServerList, NS_LDAP_SERVER_PREF_P); LDAP_SET_PARAM(arglist->profileName, NS_LDAP_PROFILE_P); LDAP_SET_PARAM(arglist->followReferrals, NS_LDAP_SEARCH_REF_P); LDAP_SET_PARAM(arglist->defaultSearchScope, NS_LDAP_SEARCH_SCOPE_P); LDAP_SET_PARAM(arglist->bindTimeLimit, NS_LDAP_BIND_TIME_P); LDAP_SET_PARAM(arglist->defaultServerList, NS_LDAP_SERVERS_P); for (counter = 0; counter < arglist->serviceAuthenticationMethod->count; counter++) { LDAP_SET_PARAM( arglist->serviceAuthenticationMethod->optlist[counter], NS_LDAP_SERVICE_AUTH_METHOD_P); } for (counter = 0; counter < arglist->serviceCredentialLevel->count; counter++) { LDAP_SET_PARAM( arglist->serviceCredentialLevel->optlist[counter], NS_LDAP_SERVICE_CRED_LEVEL_P); } for (counter = 0; counter < arglist->objectclassMap->count; counter++) { LDAP_SET_PARAM( arglist->objectclassMap->optlist[counter], NS_LDAP_OBJECTCLASSMAP_P); } for (counter = 0; counter < arglist->attributeMap->count; counter++) { LDAP_SET_PARAM( arglist->attributeMap->optlist[counter], NS_LDAP_ATTRIBUTEMAP_P); } for (counter = 0; counter < arglist->serviceSearchDescriptor->count; counter++) { LDAP_SET_PARAM( arglist->serviceSearchDescriptor->optlist[counter], NS_LDAP_SERVICE_SEARCH_DESC_P); } errorp = __ns_ldap_DumpLdif(NULL); if (errorp != NULL) { CLIENT_FPUTS(errorp->message, stderr); CLIENT_FPUTC('\n', stderr); (void) __ns_ldap_freeError(&errorp); return (CLIENT_ERR_FAIL); } return (CLIENT_SUCCESS); } /* INET6_ADDRSTRLEN + ":" + <5-digit port> + some round-up */ #define MAX_HOSTADDR_LEN (INET6_ADDRSTRLEN + 6 + 12) static int client_init(clientopts_t *arglist) { int profile_fp; int retcode = CLIENT_SUCCESS; ns_ldap_error_t *errorp; int reset_ret; int ret_copy; ns_standalone_conf_t cfg = standaloneDefaults; ns_auth_t auth = {NS_LDAP_AUTH_NONE, NS_LDAP_TLS_NONE, NS_LDAP_SASL_NONE, NS_LDAP_SASLOPT_NONE}; char peer[MAX_HOSTADDR_LEN]; ns_auth_t **authMethod; int **credLevel, i; char *cred; if (mode_verbose) CLIENT_FPUTS( gettext("About to configure machine by downloading " "a profile\n"), stderr); if (dname == NULL) { CLIENT_FPUTS( gettext("Init failed: System domain not set and " "no domainName specified.\n"), stderr); return (CLIENT_ERR_FAIL); } if (!arglist->defaultServerList) { CLIENT_FPUTS(gettext("Missing LDAP server address\n"), stderr); return (CLIENT_ERR_FAIL); } /* *** Check for invalid args *** */ LDAP_CHECK_INVALID(arglist->defaultSearchBase, "defaultSearchBase"); LDAP_CHECK_INVALID(arglist->profileTTL, "profileTTL"); LDAP_CHECK_INVALID(arglist->searchTimeLimit, "searchTimeLimit"); LDAP_CHECK_INVALID(arglist->preferredServerList, "preferredServerList"); LDAP_CHECK_INVALID(arglist->followReferrals, "followReferrals"); LDAP_CHECK_INVALID(arglist->defaultSearchScope, "defaultSearchScope"); LDAP_CHECK_INVALID(arglist->bindTimeLimit, "bindTimeLimit"); LDAP_CHECK_INVALID(arglist->objectclassMap->count, "objectclassMap"); LDAP_CHECK_INVALID(arglist->attributeMap->count, "attributeMap"); LDAP_CHECK_INVALID(arglist->serviceAuthenticationMethod->count, "serviceAuthenticationMethod"); LDAP_CHECK_INVALID(arglist->serviceCredentialLevel->count, "serviceCredentialLevel"); LDAP_CHECK_INVALID(arglist->serviceSearchDescriptor->count, "serviceSearchDescriptor"); /* *** End check for invalid args *** */ if (arglist->profileName == NULL) { if (mode_verbose) CLIENT_FPUTS( gettext("No profile specified. " "Using \"default\"\n"), stderr); arglist->profileName = "default"; } (void) strncpy(peer, arglist->defaultServerList, MAX_HOSTADDR_LEN - 1); if (separatePort(peer, &cfg.SA_SERVER, &cfg.SA_PORT) > 0) { return (CLIENT_ERR_FAIL); } if (arglist->bindDN != NULL) { cfg.SA_CRED = "proxy"; /* * We don't want to force users to always specify authentication * method when we can infer it. If users wants SSL, he/she would * have to specify appropriate -a though. */ auth.type = NS_LDAP_AUTH_SIMPLE; if (arglist->bindPasswd == NULL) { arglist->bindPasswd = getpassphrase("Bind Password:"); if (arglist->bindPasswd == NULL) { CLIENT_FPUTS(gettext("Get password failed\n"), stderr); if (gStartLdap == START_RESET) (void) start_service(LDAP_FMRI, B_TRUE); return (CLIENT_ERR_CREDENTIAL); } } } cfg.SA_BIND_DN = arglist->bindDN; cfg.SA_BIND_PWD = arglist->bindPasswd; if (arglist->authenticationMethod != NULL) { if (__ns_ldap_initAuth(arglist->authenticationMethod, &auth, &errorp) != NS_LDAP_SUCCESS) { if (errorp != NULL) { CLIENT_FPRINTF(stderr, "%s", errorp->message); (void) __ns_ldap_freeError(&errorp); } if (gStartLdap == START_RESET) (void) start_service(LDAP_FMRI, B_TRUE); return (CLIENT_ERR_FAIL); } cfg.SA_AUTH = &auth; } cfg.SA_CRED = arglist->credentialLevel; cfg.SA_DOMAIN = arglist->domainName; cfg.SA_PROFILE_NAME = arglist->profileName; cfg.SA_CERT_PATH = arglist->certificatePath; cfg.type = NS_LDAP_SERVER; if (__ns_ldap_initStandalone(&cfg, &errorp) != NS_LDAP_SUCCESS) { if (errorp != NULL) { CLIENT_FPRINTF(stderr, "%s", errorp->message); (void) __ns_ldap_freeError(&errorp); } if (gStartLdap == START_RESET) (void) start_service(LDAP_FMRI, B_TRUE); return (CLIENT_ERR_FAIL); } if (arglist->proxyDN != NULL && arglist->proxyPassword == NULL) { arglist->proxyPassword = getpassphrase("Proxy Bind Password:"); if (arglist->proxyPassword == NULL) { CLIENT_FPUTS(gettext("Get password failed\n"), stderr); if (gStartLdap == START_RESET) (void) start_service(LDAP_FMRI, B_TRUE); return (CLIENT_ERR_CREDENTIAL); } } if (arglist->proxyDN != NULL && arglist->proxyPassword != NULL) { if (__ns_ldap_setParam(NS_LDAP_BINDDN_P, arglist->proxyDN, &errorp) != NS_LDAP_SUCCESS) { if (errorp != NULL) { CLIENT_FPRINTF(stderr, "%s", errorp->message); (void) __ns_ldap_freeError(&errorp); } return (CLIENT_ERR_CREDENTIAL); } if (__ns_ldap_setParam(NS_LDAP_BINDPASSWD_P, arglist->proxyPassword, &errorp) != NS_LDAP_SUCCESS) { if (errorp != NULL) { CLIENT_FPRINTF(stderr, "%s", errorp->message); (void) __ns_ldap_freeError(&errorp); } return (CLIENT_ERR_CREDENTIAL); } } if (arglist->authenticationMethod != NULL) { if (__ns_ldap_getParam(NS_LDAP_AUTH_P, (void ***)&authMethod, &errorp) != NS_LDAP_SUCCESS) { if (errorp != NULL) { CLIENT_FPRINTF(stderr, "%s", errorp->message); (void) __ns_ldap_freeError(&errorp); } return (CLIENT_ERR_CREDENTIAL); } if (authMethod != NULL) { for (i = 0; authMethod[i] != NULL; ++i) { if (authMethod[i]->type == auth.type) { break; } } if (authMethod[i] == NULL) { CLIENT_FPRINTF(stderr, gettext( "Warning: init authentication method " "not found in DUAConfigProfile.\n")); } else { if (i != 0) { CLIENT_FPRINTF(stderr, gettext( "Warning: init authentication" "method using secondary " "authentication method from " "DUAConfigProfile.\n")); } } (void) __ns_ldap_freeParam((void ***) &authMethod); } } if (arglist->credentialLevel != NULL) { if (__ns_ldap_getParam(NS_LDAP_CREDENTIAL_LEVEL_P, (void ***)&credLevel, &errorp) != NS_LDAP_SUCCESS) { if (errorp != NULL) { CLIENT_FPRINTF(stderr, "%s", errorp->message); (void) __ns_ldap_freeError(&errorp); } return (CLIENT_ERR_CREDENTIAL); } if (credLevel != NULL) { for (i = 0; credLevel[i] != NULL; ++i) { switch (*credLevel[i]) { case NS_LDAP_CRED_ANON : cred = "none"; break; case NS_LDAP_CRED_PROXY : cred = "proxy"; break; case NS_LDAP_CRED_SELF : cred = "self"; break; default: continue; break; } if (strcmp(cred, arglist->credentialLevel) == 0) { break; } } if (credLevel[i] == NULL) { CLIENT_FPRINTF(stderr, gettext( "Warning: init credential level not found " "in DUAConfigProfile.\n")); } else { if (i != 0) { CLIENT_FPRINTF(stderr, gettext("Warning: " "init credential level using " "secondary credential level from " "DUAConfigProfile.\n")); } } (void) __ns_ldap_freeParam((void ***) &credLevel); } } retcode = credCheck(arglist); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Error in setting up credentials\n"), stderr); if (gStartLdap == START_RESET) (void) start_service(LDAP_FMRI, B_TRUE); return (retcode); } if (mode_verbose) CLIENT_FPUTS( gettext("About to modify this machines configuration " "by writing the files\n"), stderr); /* get ready to start playing with files */ retcode = stop_services(STATE_SAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Errors stopping network services.\n"), stderr); if (gStartLdap == START_RESET) (void) start_service(LDAP_FMRI, B_TRUE); return (CLIENT_ERR_FAIL); } /* Save orig versions of files */ retcode = file_backup(); if (retcode == CLIENT_ERR_RESTORE) { CLIENT_FPUTS( gettext("System not in state to enable ldap client.\n"), stderr); return (retcode); } else if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Save of system configuration failed. " "Attempting recovery.\n"), stderr); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (retcode); } /* Dump new files */ errorp = __ns_ldap_DumpConfiguration(NSCONFIGFILE); if (NULL != errorp) { CLIENT_FPRINTF(stderr, gettext("%s init: errorp is not NULL; %s\n"), cmd, errorp->message); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); return (CLIENT_ERR_FAIL); } (void) __ns_ldap_freeError(&errorp); reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } /* if (credargs(arglist)) */ errorp = __ns_ldap_DumpConfiguration(NSCREDFILE); if (NULL != errorp) { CLIENT_FPRINTF(stderr, gettext("%s init: errorp is not NULL; %s\n"), cmd, errorp->message); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); return (CLIENT_ERR_FAIL); } (void) __ns_ldap_freeError(&errorp); reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } ret_copy = system(CMD_CP " " NSSWITCH_LDAP " " NSSWITCH_CONF); if (ret_copy != 0) { CLIENT_FPRINTF(stderr, gettext("Error %d copying (%s) -> (%s)\n"), ret_copy, NSSWITCH_LDAP, NSSWITCH_CONF); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } if ((profile_fp = open(DOMAINNAME, O_WRONLY|O_CREAT|O_TRUNC, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) == -1) { /* 0644 */ CLIENT_FPRINTF(stderr, gettext("Cannot open %s\n"), DOMAINNAME); retcode = recover(STATE_NOSAVE); if (retcode != CLIENT_SUCCESS) { CLIENT_FPUTS( gettext("Recovery of systems configuration " "failed. Manual intervention of " "config files is required.\n"), stderr); return (CLIENT_ERR_FAIL); } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } return (CLIENT_ERR_FAIL); } (void) write(profile_fp, dname, strlen(dname)); (void) write(profile_fp, "\n", 1); (void) close(profile_fp); retcode = start_services(START_INIT); if (retcode == CLIENT_SUCCESS) { CLIENT_FPUTS(gettext("System successfully configured\n"), stderr); } else { CLIENT_FPUTS(gettext("Error resetting system.\n" "Recovering old system settings.\n"), stderr), /* stop any started services for recover */ /* don't stomp on history of saved services state */ reset_ret = stop_services(STATE_NOSAVE); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "stopping services during reset\n"), reset_ret); /* Coninue and try to recover what we can */ } reset_ret = recover(STATE_NOSAVE); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "recovering service files during " "reset\n"), reset_ret); /* Continue and start what we can */ } reset_ret = start_services(START_RESET); if (reset_ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "starting services during reset\n"), reset_ret); } } return (retcode); } static void usage(void) { if (mode_quiet) return; if (gen == 0) { CLIENT_FPRINTF(stderr, gettext("Usage: %s [-v | -q] init | manual | mod | " "list | uninit []\n"), cmd); CLIENT_FPRINTF(stderr, gettext("\n %s [-v | -q] [-a authenticationMethod]" " [-D bindDN]\n\t[-w bindPassword] [-j passswdFile]" " [-y proxyPasswordFile] init []\n"), cmd); CLIENT_FPUTS( gettext("\nSet up a server or workstation as a " "client of an LDAP namespace.\n"), stderr); } else { /* genprofile */ CLIENT_FPRINTF(stderr, gettext("Usage: %s [-v | -q] genprofile " "-a profileName= " "-a defaultSearchBase= \n"), cmd); CLIENT_FPUTS( gettext("\nGenerate a profile used to set up clients " "of an LDAP namespace.\n"), stderr); } CLIENT_FPUTS( gettext(" take the form of \'-a attrName=attrVal\' as " "described in the\n"), stderr); CLIENT_FPUTS(gettext("man page: ldapclient(1M)\n"), stderr); } /* * stop_services is called to stop network services prior to their * config files being moved/changed. In case a later recovery is needed * (an error occurs during config), we detect whether the service is * running and store that info so that a reset will only start services * that were stopped here. * * In terms of SMF, this translates to disabling the services. So we * try to disable them if they are in any other state * * Stop order : * sendmail, nscd, autofs, ldap.client, nisd (rpc), inetinit(domainname) */ static int stop_services(int saveState) { int ret; if (mode_verbose) { CLIENT_FPUTS(gettext("Stopping network services\n"), stderr); } if (!is_service(SENDMAIL_FMRI, SCF_STATE_STRING_DISABLED)) { if (mode_verbose) CLIENT_FPUTS(gettext("Stopping sendmail\n"), stderr); ret = disable_service(SENDMAIL_FMRI, B_TRUE); if (ret != CLIENT_SUCCESS) { /* Not serious, but tell user what to do */ CLIENT_FPRINTF(stderr, gettext("Stopping sendmail " "failed with (%d). You may need to restart " "it manually for changes to take effect.\n"), ret); } else enableFlag |= SENDMAIL_ON; } else { if (mode_verbose) CLIENT_FPUTS(gettext("sendmail not running\n"), stderr); } if (!is_service(NSCD_FMRI, SCF_STATE_STRING_DISABLED)) { if (mode_verbose) CLIENT_FPUTS(gettext("Stopping nscd\n"), stderr); ret = disable_service(NSCD_FMRI, B_TRUE); if (ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Stopping nscd " "failed with (%d)\n"), ret); return (CLIENT_ERR_FAIL); } else enableFlag |= NSCD_ON; } else { if (mode_verbose) CLIENT_FPUTS(gettext("nscd not running\n"), stderr); } if (!is_service(AUTOFS_FMRI, SCF_STATE_STRING_DISABLED)) { if (mode_verbose) CLIENT_FPUTS(gettext("Stopping autofs\n"), stderr); ret = disable_service(AUTOFS_FMRI, B_TRUE); if (ret != CLIENT_SUCCESS) { /* Not serious, but tell user what to do */ CLIENT_FPRINTF(stderr, gettext("Stopping autofs " "failed with (%d). You may need to restart " "it manually for changes to take effect.\n"), ret); } else enableFlag |= AUTOFS_ON; } else { if (mode_verbose) CLIENT_FPUTS(gettext("autofs not running\n"), stderr); } if (!is_service(LDAP_FMRI, SCF_STATE_STRING_DISABLED)) { if (saveState) gStartLdap = START_RESET; if (mode_verbose) CLIENT_FPUTS(gettext("Stopping ldap\n"), stderr); ret = disable_service(LDAP_FMRI, B_TRUE); if (ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Stopping ldap " "failed with (%d)\n"), ret); return (CLIENT_ERR_FAIL); } } else { if (mode_verbose) CLIENT_FPUTS(gettext("ldap not running\n"), stderr); } if (!is_service(NISD_FMRI, SCF_STATE_STRING_DISABLED)) { if (mode_verbose) CLIENT_FPUTS(gettext("Stopping nisd\n"), stderr); ret = disable_service(NISD_FMRI, B_TRUE); if (ret != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Stopping nisd " "failed with (%d)\n"), ret); return (CLIENT_ERR_FAIL); } } else { if (mode_verbose) CLIENT_FPUTS(gettext("nisd not running\n"), stderr); } if (!is_service(YP_FMRI, SCF_STATE_STRING_DISABLED)) { if (saveState) gStartYp = START_RESET; if (mode_verbose) CLIENT_FPUTS(gettext("Stopping nis(yp)\n"), stderr); ret = disable_service(YP_FMRI, B_TRUE); if (ret != 0) { CLIENT_FPRINTF(stderr, gettext("Stopping nis(yp) " "failed with (%d)\n"), ret); return (CLIENT_ERR_FAIL); } } else { if (mode_verbose) CLIENT_FPUTS(gettext("nis(yp) not running\n"), stderr); } return (CLIENT_SUCCESS); } /* * start_services is called to start up network services after config * files have all been setup or recovered. In the case of an error, the * files will be recovered and start_services will be called with the * "reset" flag set so that only those services that were earlier stopped * will be started. If it is not a reset, then the services associated * with files "recovered" will attempt to be started. */ static int start_services(int flag) { int sysret, retcode = CLIENT_SUCCESS, rc = NS_LDAP_SUCCESS; FILE *domain_fp; char domainname[BUFSIZ]; char cmd_domain_start[BUFSIZ]; int domainlen; ns_ldap_self_gssapi_config_t config = NS_LDAP_SELF_GSSAPI_CONFIG_NONE; ns_ldap_error_t *errorp = NULL; if (mode_verbose) { CLIENT_FPUTS(gettext("Starting network services\n"), stderr); } /* Read in current defaultdomain so we can set it */ domain_fp = fopen(DOMAINNAME, "r"); if (domain_fp == NULL) { CLIENT_FPRINTF(stderr, gettext("Error opening defaultdomain " "(%d)\n"), errno); /* if we did an ldap init, we must have domain */ if (flag == START_INIT) return (CLIENT_ERR_FAIL); } else { if (fgets(domainname, BUFSIZ, domain_fp) == NULL) { CLIENT_FPUTS(gettext("Error reading defaultdomain\n"), stderr); return (CLIENT_ERR_FAIL); } if (fclose(domain_fp) != 0) { CLIENT_FPRINTF(stderr, gettext("Error closing defaultdomain (%d)\n"), errno); return (CLIENT_ERR_FAIL); } domainlen = strlen(domainname); /* sanity check to make sure sprintf will fit */ if (domainlen > (BUFSIZE - sizeof (CMD_DOMAIN_START) - sizeof (TO_DEV_NULL) - 3)) { CLIENT_FPUTS(gettext("Specified domainname is " "too large\n"), stderr); return (CLIENT_ERR_FAIL); } if (domainname[domainlen-1] == '\n') domainname[domainlen-1] = 0; /* buffer size is checked above */ (void) snprintf(cmd_domain_start, BUFSIZ, "%s %s %s", CMD_DOMAIN_START, domainname, TO_DEV_NULL); } /* * We can be starting services after an init in which case * we want to start ldap and not start yp or nis+. */ if (flag == START_INIT) { sysret = system(cmd_domain_start); if (mode_verbose) CLIENT_FPRINTF(stderr, "start: %s %s... %s\n", CMD_DOMAIN_START, domainname, (sysret == 0) ? gettext("success") : gettext("failed")); if (sysret != 0) { CLIENT_FPRINTF(stderr, gettext("\"%s\" returned: %d\n"), CMD_DOMAIN_START, sysret); retcode = CLIENT_ERR_FAIL; } if ((rc = __ns_ldap_self_gssapi_config(&config)) != NS_LDAP_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error (%d) while " "checking sasl/GSSAPI configuration\n"), rc); retcode = CLIENT_ERR_FAIL; } if (config != NS_LDAP_SELF_GSSAPI_CONFIG_NONE) { rc = __ns_ldap_check_dns_preq( 1, mode_verbose, mode_quiet, NSSWITCH_LDAP, config, &errorp); if (errorp) (void) __ns_ldap_freeError(&errorp); if (rc != NS_LDAP_SUCCESS) retcode = CLIENT_ERR_FAIL; } if (rc == NS_LDAP_SUCCESS && start_service(LDAP_FMRI, B_TRUE) != CLIENT_SUCCESS) retcode = CLIENT_ERR_FAIL; if (config != NS_LDAP_SELF_GSSAPI_CONFIG_NONE && rc == NS_LDAP_SUCCESS && retcode == CLIENT_SUCCESS) { rc = __ns_ldap_check_gssapi_preq( 1, mode_verbose, mode_quiet, config, &errorp); if (errorp) (void) __ns_ldap_freeError(&errorp); if (rc != NS_LDAP_SUCCESS) retcode = CLIENT_ERR_FAIL; } /* No YP or NIS+ after init */ /* * Or we can be starting services after an uninit or error * recovery. We want to start whatever services were running * before. In the case of error recovery, it is the services * that were running before we stopped them (flags set in * stop_services). If it is an uninit then we determine * which services to start based on the files we recovered * (flags set in recover). */ } else { /* uninit and recover should set flags of what to start */ if (domain_fp) { sysret = system(cmd_domain_start); if (mode_verbose) CLIENT_FPRINTF(stderr, "start: %s %s... %s\n", CMD_DOMAIN_START, domainname, (sysret == 0) ? gettext("success") : gettext("failed")); if (sysret != 0) { CLIENT_FPRINTF(stderr, gettext("\"%s\" " "returned: %d\n"), CMD_DOMAIN_START, sysret); retcode = CLIENT_ERR_FAIL; } } if (gStartLdap == flag) { if (!(is_service(LDAP_FMRI, SCF_STATE_STRING_ONLINE))) if (start_service(LDAP_FMRI, B_TRUE) != CLIENT_SUCCESS) retcode = CLIENT_ERR_FAIL; } if (gStartYp == flag) { if (!(is_service(YP_FMRI, SCF_STATE_STRING_ONLINE))) (void) start_service(YP_FMRI, B_TRUE); } if (gStartNisd == flag) { if (!(is_service(NISD_FMRI, SCF_STATE_STRING_ONLINE))) (void) start_service(NISD_FMRI, B_TRUE); } } if ((enableFlag & AUTOFS_ON) && !(is_service(AUTOFS_FMRI, SCF_STATE_STRING_ONLINE))) (void) start_service(AUTOFS_FMRI, B_TRUE); if ((enableFlag & NSCD_ON) && !(is_service(NSCD_FMRI, SCF_STATE_STRING_ONLINE))) (void) start_service(NSCD_FMRI, B_TRUE); #if 0 if (flag == START_INIT && config != NS_LDAP_SELF_GSSAPI_CONFIG_NONE && retcode == CLIENT_SUCCESS && !(is_service(NSCD_FMRI, SCF_STATE_STRING_ONLINE))) { CLIENT_FPRINTF(stderr, "start: %s\n", gettext("self/sasl/GSSAPI is configured" " but nscd is not online")); retcode = CLIENT_ERR_FAIL; } #endif if ((enableFlag & SENDMAIL_ON) && !(is_service(SENDMAIL_FMRI, SCF_STATE_STRING_ONLINE))) (void) start_service(SENDMAIL_FMRI, B_TRUE); /* * Restart name-service milestone so that any consumer * which depends on it will be restarted. */ (void) restart_service(NS_MILESTONE_FMRI, B_TRUE); return (retcode); } /* * credCheck is called to check if credentials are required for this * configuration. Currently, this means that if any credentialLevel is * proxy and any authenticationMethod is something other than none, then * credential info is required (proxyDN and proxyPassword). */ static int credCheck(clientopts_t *arglist) { int counter; int **credLevel; ns_auth_t **authMethod; char **proxyDN, **proxyPassword; ns_ldap_error_t *errorp; int credProxy, authNotNone; int retcode; /* If credentialLevel is proxy, make sure we have proxyDN and proxyPassword */ retcode = __ns_ldap_getParam(NS_LDAP_CREDENTIAL_LEVEL_P, (void ***)&credLevel, &errorp); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("Error %d while trying to retrieve " "credLevel\n"), retcode); return (CLIENT_ERR_FAIL); } retcode = __ns_ldap_getParam(NS_LDAP_AUTH_P, (void ***)&authMethod, &errorp); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("Error %d while trying to retrieve " "authMethod\n"), retcode); return (CLIENT_ERR_FAIL); } retcode = __ns_ldap_getParam(NS_LDAP_BINDDN_P, (void ***)&proxyDN, &errorp); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("Error %d while trying to retrieve proxyDN\n"), retcode); return (CLIENT_ERR_FAIL); } retcode = __ns_ldap_getParam(NS_LDAP_BINDPASSWD_P, (void ***)&proxyPassword, &errorp); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("Error %d while trying to retrieve " "proxyPassword\n"), retcode); return (CLIENT_ERR_FAIL); } if (mode_verbose) { CLIENT_FPRINTF(stderr, gettext("Proxy DN: %s\n"), (proxyDN && proxyDN[0]) ? proxyDN[0] : "NULL"); CLIENT_FPRINTF(stderr, gettext("Proxy password: %s\n"), (proxyPassword && proxyPassword[0]) ? proxyPassword[0] : "NULL"); } credProxy = 0; /* flag to indicate if we have a credLevel of proxy */ for (counter = 0; credLevel && credLevel[counter] != NULL; counter++) { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("Credential level: %d\n"), *credLevel[counter]); if (*credLevel[counter] == NS_LDAP_CRED_PROXY) { credProxy = 1; break; } } authNotNone = 0; /* flag for authMethod other than none */ for (counter = 0; authMethod && authMethod[counter] != NULL; counter++) { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("Authentication method: %d\n"), authMethod[counter]->type); if (authMethod[counter]->type != NS_LDAP_AUTH_NONE && !(authMethod[counter]->type == NS_LDAP_AUTH_TLS && authMethod[counter]->tlstype == NS_LDAP_TLS_NONE)) { authNotNone = 1; break; } } /* First, if we don't need proxyDN/Password then just return ok */ if (!(credProxy && authNotNone)) { if (mode_verbose) CLIENT_FPUTS( gettext("No proxyDN/proxyPassword required\n"), stderr); return (CLIENT_SUCCESS); } /* Now let's check if we have the cred stuff we need */ if (!proxyDN || !proxyDN[0]) { CLIENT_FPUTS( gettext("credentialLevel is proxy and no proxyDN " "specified\n"), stderr); return (CLIENT_ERR_CREDENTIAL); } /* If we need proxyPassword (prompt) */ if (!proxyPassword || !proxyPassword[0]) { CLIENT_FPUTS( gettext("credentialLevel requires proxyPassword\n"), stderr); arglist->proxyPassword = getpassphrase("Proxy Bind Password:"); if (arglist->proxyPassword == NULL) { CLIENT_FPUTS(gettext("Get password failed\n"), stderr); return (CLIENT_ERR_CREDENTIAL); } LDAP_SET_PARAM(arglist->proxyPassword, NS_LDAP_BINDPASSWD_P); if (retcode != 0) { CLIENT_FPUTS( gettext("setParam proxyPassword failed.\n"), stderr); return (CLIENT_ERR_CREDENTIAL); } } return (CLIENT_SUCCESS); } /* * try to restore the previous name space on this machine */ static int recover(int saveState) { struct stat buf; int stat_ret, retcode, fd; int domain = 0, domainlen; char yp_dir[BUFSIZE], yp_dir_back[BUFSIZE]; char name[BUFSIZ]; char *ldap_conf_file, *ldap_cred_file; char ldap_file_back[BUFSIZE], ldap_cred_back[BUFSIZE]; /* If running as Sysid Install become a no-op */ if (sysid_install == B_TRUE) return (CLIENT_SUCCESS); stat_ret = stat(LDAP_RESTORE_DIR, &buf); if (stat_ret != 0) { CLIENT_FPUTS( gettext("Cannot recover. No backup files " "found.\n"), stderr); CLIENT_FPUTS( gettext("\t Either this machine was not initialized\n"), stderr); CLIENT_FPUTS( gettext("\t by ldapclient or the backup files " "have been\n"), stderr); CLIENT_FPUTS( gettext("\t removed manually or with an \"uninit\"\n"), stderr); return (CLIENT_ERR_RESTORE); /* invalid backup */ } /* * Get domainname. Allow no domainname for the case where "files" * config was backed up. */ stat_ret = stat(DOMAINNAME_BACK, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: stat(%s)=%d\n"), DOMAINNAME_BACK, stat_ret); if (stat_ret == 0) { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: open(%s)\n"), DOMAINNAME_BACK); fd = open(DOMAINNAME_BACK, O_RDONLY); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: read(%s)\n"), DOMAINNAME_BACK); domainlen = read(fd, &(name[0]), BUFSIZ-1); (void) close(fd); if (domainlen < 0) { CLIENT_FPUTS( gettext("Cannot recover. Cannot determine " "previous domain name.\n"), stderr); return (CLIENT_ERR_RESTORE); /* invalid backup */ } else { char *ptr; ptr = strchr(&(name[0]), '\n'); if (ptr != NULL) *ptr = '\0'; else name[domainlen] = '\0'; if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: old domainname " "\"%s\"\n"), name); if (strlen(name) == 0) domain = 0; else domain = 1; /* flag that we have domain */ } } /* * we can recover at this point * remove LDAP config files before restore */ (void) unlink(NSCONFIGFILE); (void) unlink(NSCREDFILE); ldap_conf_file = strrchr(NSCONFIGFILE, '/') + 1; ldap_cred_file = strrchr(NSCREDFILE, '/') + 1; (void) strlcpy(ldap_file_back, LDAP_RESTORE_DIR "/", BUFSIZE); (void) strlcat(ldap_file_back, ldap_conf_file, BUFSIZE); stat_ret = stat(ldap_file_back, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: stat(%s)=%d\n"), ldap_file_back, stat_ret); if (stat_ret == 0) { if (saveState) gStartLdap = START_UNINIT; retcode = file_move(ldap_file_back, NSCONFIGFILE); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s)=%d\n"), ldap_file_back, NSCONFIGFILE, retcode); if (retcode != 0) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s) failed\n"), ldap_file_back, NSCONFIGFILE); } (void) strlcpy(ldap_cred_back, LDAP_RESTORE_DIR "/", BUFSIZE); (void) strlcat(ldap_cred_back, ldap_cred_file, BUFSIZE); stat_ret = stat(ldap_cred_back, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: stat(%s)=%d\n"), ldap_cred_back, stat_ret); if (stat_ret == 0) { retcode = file_move(ldap_cred_back, NSCREDFILE); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s)=%d\n"), ldap_cred_back, NSCREDFILE, retcode); if (retcode != 0) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s) failed\n"), ldap_cred_back, NSCREDFILE); } /* Check for recovery of NIS+ */ stat_ret = stat(NIS_COLDSTART_BACK, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: stat(%s)=%d\n"), NIS_COLDSTART_BACK, stat_ret); if (stat_ret == 0) { if (saveState) { gStartNisd = START_UNINIT; } if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s)\n"), NIS_COLDSTART_BACK, NIS_COLDSTART); retcode = file_move(NIS_COLDSTART_BACK, NIS_COLDSTART); if (retcode != 0) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s) failed!\n"), NIS_COLDSTART_BACK, NIS_COLDSTART); } /* Check for recovery of NIS(YP) if we have a domainname */ if (domain) { /* "name" would have to be huge for this, but just in case */ if (strlen(name) >= (BUFSIZE - strlen(LDAP_RESTORE_DIR))) return (CLIENT_ERR_FAIL); if (strlen(name) >= (BUFSIZE - strlen(YP_BIND_DIR))) return (CLIENT_ERR_FAIL); (void) strlcpy(yp_dir_back, LDAP_RESTORE_DIR "/", BUFSIZE); (void) strlcat(yp_dir_back, name, BUFSIZE); stat_ret = stat(yp_dir_back, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: stat(%s)=%d\n"), yp_dir_back, stat_ret); if (stat_ret == 0) { (void) strlcpy(yp_dir, YP_BIND_DIR "/", BUFSIZE); (void) strlcat(yp_dir, name, BUFSIZE); retcode = file_move(yp_dir_back, yp_dir); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, " "%s)=%d\n"), yp_dir_back, yp_dir, retcode); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, " "%s) failed!\n"), yp_dir_back, yp_dir); } else { if (saveState) gStartYp = START_UNINIT; } } } /* restore machine configuration */ stat_ret = stat(NSSWITCH_BACK, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: stat(%s)=%d\n"), NSSWITCH_BACK, stat_ret); if (stat_ret == 0) { retcode = file_move(NSSWITCH_BACK, NSSWITCH_CONF); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s)=%d\n"), NSSWITCH_BACK, NSSWITCH_CONF, retcode); if (retcode != 0) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s) failed\n"), NSSWITCH_BACK, NSSWITCH_CONF); } stat_ret = stat(DOMAINNAME_BACK, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: stat(%s)=%d\n"), DOMAINNAME_BACK, stat_ret); if (stat_ret == 0) { retcode = file_move(DOMAINNAME_BACK, DOMAINNAME); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s)=%d\n"), DOMAINNAME_BACK, DOMAINNAME, retcode); if (retcode != 0) CLIENT_FPRINTF(stderr, gettext("recover: file_move(%s, %s) failed\n"), DOMAINNAME_BACK, DOMAINNAME); } retcode = rmdir(LDAP_RESTORE_DIR); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("Error removing \"%s\" directory.\n"), LDAP_RESTORE_DIR); } return (CLIENT_SUCCESS); } /* * try to save the current state of this machine. * this just overwrites any old saved configration files. * * This function should only be called after network services have been stopped. * * Returns 0 on successful save * Otherwise returns -1 */ static int file_backup(void) { struct stat buf; int domain_stat, conf_stat, ldap_stat; int nis_stat, yp_stat, restore_stat; int retcode, namelen, ret; char yp_dir[BUFSIZ], yp_dir_back[BUFSIZ]; char name[BUFSIZ]; char *ldap_conf_file, *ldap_cred_file; char ldap_file_back[BUFSIZE], ldap_cred_back[BUFSIZE]; ret = CLIENT_SUCCESS; /* If running as Sysid Install become a no-op */ if (sysid_install == B_TRUE) return (CLIENT_SUCCESS); /* If existing backup files, clear for this run */ restore_stat = stat(LDAP_RESTORE_DIR, &buf); if (restore_stat == 0) { if (mode_verbose) { CLIENT_FPUTS( gettext("Removing existing restore " "directory\n"), stderr); } (void) system("/bin/rm -fr " LDAP_RESTORE_DIR); restore_stat = stat(LDAP_RESTORE_DIR, &buf); if (restore_stat == 0) { CLIENT_FPRINTF(stderr, gettext("Unable to remove backup " "directory (%s)\n"), LDAP_RESTORE_DIR); return (CLIENT_ERR_RESTORE); } } retcode = mkdir(LDAP_RESTORE_DIR, 0755); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: Failed to make %s backup " "directory. mkdir=%d\n"), LDAP_RESTORE_DIR, retcode); return (CLIENT_ERR_FAIL); } conf_stat = stat(NSSWITCH_CONF, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: stat(%s)=%d\n"), NSSWITCH_CONF, conf_stat); if (conf_stat == 0) { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: (%s -> %s)\n"), NSSWITCH_CONF, NSSWITCH_BACK); retcode = file_move(NSSWITCH_CONF, NSSWITCH_BACK); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: file_move(%s, %s) failed " "with %d\n"), NSSWITCH_CONF, NSSWITCH_BACK, retcode); ret = CLIENT_ERR_RENAME; } } else { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: No %s file.\n"), NSSWITCH_CONF); } domain_stat = stat(DOMAINNAME, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: stat(%s)=%d\n"), DOMAINNAME, domain_stat); if ((domain_stat == 0) && (buf.st_size > 0)) { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: (%s -> %s)\n"), DOMAINNAME, DOMAINNAME_BACK); retcode = file_move(DOMAINNAME, DOMAINNAME_BACK); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: file_move(%s, %s) failed " "with %d\n"), DOMAINNAME, DOMAINNAME_BACK, retcode); ret = CLIENT_ERR_RENAME; } } else { if (mode_verbose) if (domain_stat != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: No %s file.\n"), DOMAINNAME); } else { CLIENT_FPRINTF(stderr, gettext("file_backup: Empty %s " "file.\n"), DOMAINNAME); } } nis_stat = stat(NIS_COLDSTART, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: stat(%s)=%d\n"), NIS_COLDSTART, nis_stat); if (nis_stat == 0) { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: (%s -> %s)\n"), NIS_COLDSTART, NIS_COLDSTART_BACK); retcode = file_move(NIS_COLDSTART, NIS_COLDSTART_BACK); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: file_move(%s, %s) failed " "with %d\n"), NIS_COLDSTART, NIS_COLDSTART_BACK, retcode); ret = CLIENT_ERR_RENAME; } } else { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: No %s file.\n"), NIS_COLDSTART); } namelen = BUFSIZ; (void) sysinfo(SI_SRPC_DOMAIN, &(name[0]), namelen); namelen = strlen(name); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: nis domain is \"%s\"\n"), (namelen > 0) ? name : "EMPTY"); /* check for domain name if not set cannot save NIS(YP) state */ if (namelen > 0) { /* moving /var/yp/binding will cause ypbind to core dump */ (void) strlcpy(yp_dir, YP_BIND_DIR "/", BUFSIZE); (void) strlcat(yp_dir, name, BUFSIZE); yp_stat = stat(yp_dir, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: stat(%s)=%d\n"), yp_dir, yp_stat); if (yp_stat == 0) { (void) strlcpy(yp_dir_back, LDAP_RESTORE_DIR "/", BUFSIZE); (void) strlcat(yp_dir_back, name, BUFSIZE); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: (%s -> %s)\n"), yp_dir, yp_dir_back); retcode = file_move(yp_dir, yp_dir_back); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: file_move(%s, %s)" " failed with %d\n"), yp_dir, yp_dir_back, retcode); ret = CLIENT_ERR_RENAME; } } else { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: No %s " "directory.\n"), yp_dir); } } /* point to file name, not path delim (/) */ ldap_conf_file = strrchr(NSCONFIGFILE, '/') + 1; ldap_cred_file = strrchr(NSCREDFILE, '/') + 1; ldap_stat = stat(NSCONFIGFILE, &buf); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: stat(%s)=%d\n"), NSCONFIGFILE, ldap_stat); if (ldap_stat == 0) { (void) strlcpy(ldap_file_back, LDAP_RESTORE_DIR "/", BUFSIZE); (void) strlcat(ldap_file_back, ldap_conf_file, BUFSIZE); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: (%s -> %s)\n"), NSCONFIGFILE, ldap_file_back); retcode = file_move(NSCONFIGFILE, ldap_file_back); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: file_move(%s, %s) failed " "with %d\n"), NSCONFIGFILE, ldap_file_back, retcode); ret = CLIENT_ERR_RENAME; } (void) strlcpy(ldap_cred_back, LDAP_RESTORE_DIR "/", BUFSIZE); (void) strlcat(ldap_cred_back, ldap_cred_file, BUFSIZE); if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: (%s -> %s)\n"), NSCREDFILE, ldap_cred_back); retcode = file_move(NSCREDFILE, ldap_cred_back); if (retcode != 0) { CLIENT_FPRINTF(stderr, gettext("file_backup: file_move(%s, %s) failed " "with %d\n"), NSCREDFILE, ldap_cred_back, retcode); ret = CLIENT_ERR_RENAME; } } else { if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("file_backup: No %s file.\n"), NSCONFIGFILE); } return (ret); } /* * mod_backup() * * This function is used to temporily backup the LDAP client files in /var/ldap * that the "mod" operation needs to update. If an error occurs then the * function mod_recover() can be invoke to recover the unmodified files. */ static int mod_backup(void) { int rc; int retcode = CLIENT_SUCCESS; rc = system(CMD_CP " " NSCONFIGFILE " " NSCONFIGFILE ".mod"); retcode += rc; if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("mod_backup: backup %s for %s\n"), rc ? "failed" : "successful", NSCONFIGFILE); rc = system(CMD_CP " " NSCREDFILE " " NSCREDFILE ".mod"); retcode += rc; if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("mod_backup: backup %s for %s\n"), rc ? "failed" : "successful", NSCREDFILE); rc = system(CMD_CP " " DOMAINNAME " " DOMAINNAME ".mod"); retcode += rc; if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("mod_backup: backup %s for %s\n"), rc ? "failed" : "successful", DOMAINNAME); if (retcode != CLIENT_SUCCESS) retcode = CLIENT_ERR_RENAME; return (retcode); } /* * mod_recover() * * This function is used to recover the temporily backed up files by * the mod_backup() function if an error occurs during the "mod" * operation. */ static int mod_recover(void) { int rc; int retcode = CLIENT_SUCCESS; rc = system(CMD_MV " " NSCONFIGFILE ".mod " NSCONFIGFILE); retcode += rc; if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("mod_recover: recovery %s for %s\n"), rc ? "failed" : "successful", NSCONFIGFILE); rc = system(CMD_MV " " NSCREDFILE ".mod " NSCREDFILE); retcode += rc; if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("mod_recover: recovery %s for %s\n"), rc ? "failed" : "successful", NSCREDFILE); rc = system(CMD_MV " " DOMAINNAME ".mod " DOMAINNAME); retcode += rc; if (mode_verbose) CLIENT_FPRINTF(stderr, gettext("mod_recover: recovery %s for %s\n"), rc ? "failed" : "successful", DOMAINNAME); if (retcode != CLIENT_SUCCESS) retcode = CLIENT_ERR_RENAME; return (retcode); } /* * mod_cleanup() * * This function removes the .mod files in /var/ldap. */ static void mod_cleanup(void) { (void) system(CMD_RM " " NSCONFIGFILE ".mod " TO_DEV_NULL); (void) system(CMD_RM " " NSCREDFILE ".mod " TO_DEV_NULL); (void) system(CMD_RM " " DOMAINNAME ".mod " TO_DEV_NULL); } #define MAX_DN_ARRAY 100 #define LDAP_NAMINGCONTEXTS "namingcontexts" static multival_t * multival_new() { multival_t *hold; hold = calloc(1, sizeof (multival_t)); if (hold == NULL) { CLIENT_FPUTS( gettext("multival_new: Memory allocation error\n"), stderr); } return (hold); /* NULL -> error */ } static int multival_add(multival_t *list, char *opt) { if (opt == NULL) { CLIENT_FPUTS( gettext("Empty value passed to multival_add\n"), stderr); return (CLIENT_ERR_FAIL); } if (list->count == 0) { list->optlist = (char **)malloc(sizeof (char **)); } else { list->optlist = (char **)realloc(list->optlist, (list->count + 1) * sizeof (char **)); } if (list->optlist == NULL) { CLIENT_FPUTS(gettext("Error allocating memory\n"), stderr); return (CLIENT_ERR_MEMORY); /* 0 is success */ } list->optlist[list->count] = opt; list->count++; return (CLIENT_SUCCESS); } static void multival_free(multival_t *list) { if (list == NULL) return; if (list->optlist != NULL) free(list->optlist); free(list); } static clientopts_t * clientopts_new() { clientopts_t *hold; hold = calloc(1, sizeof (clientopts_t)); if (NULL == hold) { CLIENT_FPUTS(gettext("Error allocating memory for " "clientopts structure\n"), stderr); return (hold); /* NULL -> error */ } hold->serviceAuthenticationMethod = multival_new(); if (NULL == hold->serviceAuthenticationMethod) { CLIENT_FPUTS(gettext("Error allocating memory for " "serviceAuthenticationMethod\n"), stderr); free(hold); return (NULL); /* NULL -> error */ } hold->serviceCredentialLevel = multival_new(); if (NULL == hold->serviceCredentialLevel) { CLIENT_FPUTS(gettext("Error allocating memory for " "serviceCredentialLevel\n"), stderr); multival_free(hold->serviceAuthenticationMethod); free(hold); return (NULL); /* NULL -> error */ } hold->objectclassMap = multival_new(); if (NULL == hold->objectclassMap) { CLIENT_FPUTS(gettext("Error allocating memory for " "objectclassMap\n"), stderr); multival_free(hold->serviceAuthenticationMethod); multival_free(hold->serviceCredentialLevel); free(hold); return (NULL); /* NULL -> error */ } hold->attributeMap = multival_new(); if (NULL == hold->attributeMap) { CLIENT_FPUTS(gettext("Error allocating memory for " "attributeMap\n"), stderr); multival_free(hold->serviceAuthenticationMethod); multival_free(hold->serviceCredentialLevel); multival_free(hold->objectclassMap); free(hold); return (NULL); /* NULL -> error */ } hold->serviceSearchDescriptor = multival_new(); if (NULL == hold->serviceSearchDescriptor) { CLIENT_FPUTS(gettext("Error allocating memory for " "serviceSearchDescriptor\n"), stderr); multival_free(hold->serviceAuthenticationMethod); multival_free(hold->serviceCredentialLevel); multival_free(hold->objectclassMap); multival_free(hold->attributeMap); free(hold); return (NULL); /* NULL -> error */ } return (hold); } static void clientopts_free(clientopts_t *list) { if (NULL == list) return; multival_free(list->serviceAuthenticationMethod); multival_free(list->serviceCredentialLevel); multival_free(list->objectclassMap); multival_free(list->attributeMap); multival_free(list->serviceSearchDescriptor); free(list); } static void multival_list(char *opt, multival_t *list) { int i; if (list->count == 0) return; (void) puts(opt); for (i = 0; i < list->count; i++) { (void) printf("\t\targ[%d]: %s\n", i, list->optlist[i]); } } /* return the number of arguments specified in the command line */ static int num_args(clientopts_t *list) { int arg_count = 0; arg_count += list->authenticationMethod ? 1 : 0; arg_count += list->serviceAuthenticationMethod->count; arg_count += list->defaultSearchBase ? 1 : 0; arg_count += list->credentialLevel ? 1 : 0; arg_count += list->serviceCredentialLevel->count; arg_count += list->domainName ? 1 : 0; arg_count += list->proxyDN ? 1 : 0; arg_count += list->profileTTL ? 1 : 0; arg_count += list->objectclassMap->count; arg_count += list->searchTimeLimit ? 1 : 0; arg_count += list->preferredServerList ? 1 : 0; arg_count += list->profileName ? 1 : 0; arg_count += list->followReferrals ? 1 : 0; arg_count += list->attributeMap->count; arg_count += list->defaultSearchScope ? 1 : 0; arg_count += list->serviceSearchDescriptor->count; arg_count += list->bindTimeLimit ? 1 : 0; arg_count += list->proxyPassword ? 1 : 0; arg_count += list->defaultServerList ? 1 : 0; arg_count += list->certificatePath ? 1 : 0; return (arg_count); } #define CLIENT_PRINT(opt, str) if (str) \ (void) printf("%s%s\n", (opt), (str)) static void dumpargs(clientopts_t *list) { CLIENT_PRINT("\tauthenticationMethod: ", list->authenticationMethod); multival_list("\tserviceAuthenticationMethod: ", list->serviceAuthenticationMethod); CLIENT_PRINT("\tdefaultSearchBase: ", list->defaultSearchBase); CLIENT_PRINT("\tcredentialLevel: ", list->credentialLevel); multival_list("\tserviceCredentialLevel: ", list->serviceCredentialLevel); CLIENT_PRINT("\tdomainName: ", list->domainName); CLIENT_PRINT("\tproxyDN: ", list->proxyDN); CLIENT_PRINT("\tprofileTTL: ", list->profileTTL); multival_list("\tobjectclassMap: ", list->objectclassMap); CLIENT_PRINT("\tsearchTimeLimit: ", list->searchTimeLimit); CLIENT_PRINT("\tpreferredServerList: ", list->preferredServerList); CLIENT_PRINT("\tprofileName: ", list->profileName); CLIENT_PRINT("\tfollowReferrals: ", list->followReferrals); multival_list("\tattributeMap: ", list->attributeMap); CLIENT_PRINT("\tdefaultSearchScope: ", list->defaultSearchScope); multival_list("\tserviceSearchDescriptor: ", list->serviceSearchDescriptor); CLIENT_PRINT("\tbindTimeLimit: ", list->bindTimeLimit); CLIENT_PRINT("\tproxyPassword: ", list->proxyPassword); CLIENT_PRINT("\tdefaultServerList: ", list->defaultServerList); CLIENT_PRINT("\tcertificatePath: ", list->certificatePath); } /* These definitions are only used in parseParam() below. */ struct param { char *name; int index; }; static struct param paramArray[] = { {"proxyDN", NS_LDAP_BINDDN_P}, {"proxyPassword", NS_LDAP_BINDPASSWD_P}, {"defaultServerList", NS_LDAP_SERVERS_P}, {"defaultSearchBase", NS_LDAP_SEARCH_BASEDN_P}, {"authenticationMethod", NS_LDAP_AUTH_P}, {"followReferrals", NS_LDAP_SEARCH_REF_P}, {"profileTTL", NS_LDAP_CACHETTL_P}, {"certificatePath", NS_LDAP_HOST_CERTPATH_P}, {"defaultSearchScope", NS_LDAP_SEARCH_SCOPE_P}, {"bindTimeLimit", NS_LDAP_BIND_TIME_P}, {"searchTimeLimit", NS_LDAP_SEARCH_TIME_P}, {"preferredServerList", NS_LDAP_SERVER_PREF_P}, {"profileName", NS_LDAP_PROFILE_P}, {"credentialLevel", NS_LDAP_CREDENTIAL_LEVEL_P}, {"serviceSearchDescriptor", NS_LDAP_SERVICE_SEARCH_DESC_P}, {"attributeMap", NS_LDAP_ATTRIBUTEMAP_P}, {"objectclassMap", NS_LDAP_OBJECTCLASSMAP_P}, {"serviceAuthenticationMethod", NS_LDAP_SERVICE_AUTH_METHOD_P}, {"serviceCredentialLevel", NS_LDAP_SERVICE_CRED_LEVEL_P}, {"domainName", LOCAL_DOMAIN_P}, {NULL, 0} }; static int parseParam(char *param, char **paramVal) { char *val = NULL; int counter; if (mode_verbose) { CLIENT_FPRINTF(stderr, gettext("Parsing %s\n"), param); } val = strchr(param, '='); if (val == NULL) { CLIENT_FPUTS( gettext("Didn\'t find \'=\' character in string\n"), stderr); paramVal = NULL; return (CLIENT_ERR_PARSE); } *val = '\0'; for (counter = 0; paramArray[counter].name != NULL; counter++) { if (strcasecmp(paramArray[counter].name, param) == 0) { *paramVal = val+1; *val = '='; /* restore original param */ return (paramArray[counter].index); } } /* Not found */ *val = '='; /* restore original param */ *paramVal = NULL; return (CLIENT_ERR_PARSE); } /* * The following macro checks if an option has already been specified * and errs out with usage if so */ #define CLIENT_OPT_CHECK(opt, optarg) \ if (optarg) { \ CLIENT_FPUTS(gettext("Invalid use of option\n"), stderr); \ usage(); \ clientopts_free(optlist); \ return (CLIENT_ERR_FAIL); \ } static int clientSetParam(clientopts_t *optlist, int paramFlag, char *attrVal) { int retcode = 0; int counter; switch (paramFlag) { case NS_LDAP_AUTH_P: CLIENT_OPT_CHECK(paramFlag, optlist->authenticationMethod); optlist->authenticationMethod = attrVal; break; case NS_LDAP_SERVICE_AUTH_METHOD_P: /* multiple allowed */ retcode = multival_add(optlist->serviceAuthenticationMethod, attrVal); if (retcode != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error processing attrVal %s\n"), attrVal?attrVal:"NULL"); usage(); clientopts_free(optlist); return (CLIENT_ERR_FAIL); } break; case NS_LDAP_SEARCH_BASEDN_P: CLIENT_OPT_CHECK(paramFlag, optlist->defaultSearchBase); optlist->defaultSearchBase = attrVal; break; case NS_LDAP_CREDENTIAL_LEVEL_P: CLIENT_OPT_CHECK(paramFlag, optlist->credentialLevel); optlist->credentialLevel = attrVal; break; case NS_LDAP_SERVICE_CRED_LEVEL_P: /* multiple allowed */ retcode = multival_add(optlist->serviceCredentialLevel, attrVal); if (retcode != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error processing attrVal %s\n"), attrVal?attrVal:"NULL"); usage(); clientopts_free(optlist); return (CLIENT_ERR_FAIL); } break; case LOCAL_DOMAIN_P: CLIENT_OPT_CHECK(paramFlag, optlist->domainName); optlist->domainName = attrVal; dname = optlist->domainName; break; case NS_LDAP_BINDDN_P: CLIENT_OPT_CHECK(paramFlag, optlist->proxyDN); optlist->proxyDN = attrVal; break; case NS_LDAP_CACHETTL_P: CLIENT_OPT_CHECK(paramFlag, optlist->profileTTL); optlist->profileTTL = attrVal; break; case NS_LDAP_OBJECTCLASSMAP_P: /* multiple allowed */ retcode = multival_add(optlist->objectclassMap, attrVal); if (retcode != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error processing attrVal %s\n"), attrVal?attrVal:"NULL"); usage(); clientopts_free(optlist); return (CLIENT_ERR_FAIL); } break; case NS_LDAP_SEARCH_TIME_P: CLIENT_OPT_CHECK(paramFlag, optlist->searchTimeLimit); optlist->searchTimeLimit = attrVal; break; case NS_LDAP_SERVER_PREF_P: CLIENT_OPT_CHECK(paramFlag, optlist->preferredServerList); optlist->preferredServerList = attrVal; /* replace ',' chars with ' ' for proper syntax */ for (counter = 0; counter < strlen(optlist->preferredServerList); counter++) { if (optlist->preferredServerList[counter] == ',') optlist->preferredServerList[counter] = ' '; } break; case NS_LDAP_PROFILE_P: CLIENT_OPT_CHECK(paramFlag, optlist->profileName); optlist->profileName = attrVal; break; case NS_LDAP_SEARCH_REF_P: CLIENT_OPT_CHECK(paramFlag, optlist->followReferrals); if (0 == strcasecmp(attrVal, "followref")) optlist->followReferrals = "TRUE"; else if (0 == strcasecmp(attrVal, "noref")) optlist->followReferrals = "FALSE"; else optlist->followReferrals = attrVal; break; case NS_LDAP_ATTRIBUTEMAP_P: /* multiple allowed */ retcode = multival_add(optlist->attributeMap, attrVal); if (retcode != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error processing attrVal %s\n"), attrVal?attrVal:"NULL"); usage(); clientopts_free(optlist); return (CLIENT_ERR_FAIL); } break; case NS_LDAP_SEARCH_SCOPE_P: CLIENT_OPT_CHECK(paramFlag, optlist->defaultSearchScope); optlist->defaultSearchScope = attrVal; break; case NS_LDAP_SERVICE_SEARCH_DESC_P: /* multiple allowed */ retcode = multival_add(optlist->serviceSearchDescriptor, attrVal); if (retcode != CLIENT_SUCCESS) { CLIENT_FPRINTF(stderr, gettext("Error processing attrVal %s\n"), attrVal?attrVal:"NULL"); usage(); clientopts_free(optlist); return (CLIENT_ERR_FAIL); } break; case NS_LDAP_BIND_TIME_P: CLIENT_OPT_CHECK(paramFlag, optlist->bindTimeLimit); optlist->bindTimeLimit = attrVal; break; case NS_LDAP_BINDPASSWD_P: CLIENT_OPT_CHECK(paramFlag, optlist->proxyPassword); optlist->proxyPassword = attrVal; break; case NS_LDAP_HOST_CERTPATH_P: CLIENT_OPT_CHECK(paramFlag, optlist->certificatePath); optlist->certificatePath = attrVal; break; case NS_LDAP_SERVERS_P: CLIENT_OPT_CHECK(paramFlag, optlist->defaultServerList); optlist->defaultServerList = attrVal; break; default: usage(); return (CLIENT_ERR_FAIL); /* break; lint doesn't like break before end of switch */ } return (retcode); } /* * file_move() - Used to move a config file (backup/restore). * * This function uses a system() call with /bin/mv to handle the * case where the backup directory (/var) is on a different file * system than the config file (typically /etc). */ static int file_move(const char *from, const char *to) { int retcode; char mvCommand[] = CMD_MV; char cmd_buffer[(2 * MAXPATHLEN) + sizeof (mvCommand) + 3]; (void) snprintf(cmd_buffer, sizeof (cmd_buffer), "%s %s %s", mvCommand, from, to); /* * This function should only be used internally to move * system files to/from the backup directory. For security * reasons (this is run as root), don't use this function * with arguments passed into the program. */ retcode = system(cmd_buffer); return (retcode); } /* * Manipulate the service as instructed by "dowhat" */ static int do_service(const char *fmri, boolean_t waitflag, int dowhat, const char *state) { int status; boolean_t is_maint; const char *what = gettext("not set"); useconds_t max; /* Check if we are in maintenance */ is_maint = is_service(fmri, SCF_STATE_STRING_MAINT); switch (dowhat) { case START_SERVICE: what = gettext("start"); status = smf_enable_instance(fmri, (sysid_install == B_TRUE)?SMF_TEMPORARY:0); break; case STOP_SERVICE: what = gettext("stop"); status = smf_disable_instance(fmri, (sysid_install == B_TRUE)?SMF_TEMPORARY:0); break; case RESTART_SERVICE: what = gettext("restart"); status = smf_restart_instance(fmri); break; default: /* coding error; will not happen */ assert(0); } /* * If the service was previously in maintenance then we need to * clear it immediately. The "dowhat" action will set the * enabled property of the service as intended by the caller while * clear will actually cause it to be enabled/disabled. * We assume that the caller has called us after taking some * recovery action. Even if it's not the case, we don't lose * anything. */ if (status == 0 && is_maint == B_TRUE) { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s\n", what, fmri, gettext("restoring from maintenance state")); status = smf_restore_instance(fmri); } if (status == 0) { /* Check if we need to wait ? */ if (waitflag == B_FALSE) { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s\n", what, fmri, gettext("success")); return (CLIENT_SUCCESS); } /* Otherwise wait for max seconds (from the manifest) */ max = get_timeout_value(dowhat, fmri, DEFAULT_TIMEOUT); status = wait_till(fmri, state, max, what, !is_maint); if (status == CLIENT_SUCCESS) return (CLIENT_SUCCESS); /* For error fall through for corrective action */ } else { /* Well, service failed ... */ if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s: %s\n", what, fmri, gettext("failed"), scf_strerror(scf_error())); status = CLIENT_ERR_FAIL; /* For error fall through for corrective action */ } /* * If service is still offline after start/restart, then transitioning * failed and guess is restarter failed to apply the timeout as well. * So instead of leaving it offline, let's just disable it until we have * some other mechanism available from smf to handle such situation. */ if (dowhat != STOP_SERVICE) if (is_service(fmri, SCF_STATE_STRING_OFFLINE)) { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s\n", what, fmri, gettext("offline to disable")); (void) disable_service(fmri, waitflag); } return (status); } /* * Wait for "max" usecs for the service described by "fmri" to change * to "state". If check_maint is true then return immediately if * service goes into maintenance */ static int wait_till(const char *fmri, const char *state, useconds_t max, const char *what, boolean_t check_maint) { char *st; useconds_t usecs = INIT_WAIT_USECS; for (; max > 0; max -= usecs) { /* incremental wait */ usecs *= 2; usecs = (usecs > max)?max:usecs; if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s %u %s\n", what, gettext("sleep"), usecs, gettext("microseconds")); (void) usleep(usecs); /* Check state after the wait */ if ((st = smf_get_state(fmri)) != NULL) { if (strcmp(st, state) == 0) { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s\n", what, fmri, gettext("success")); free(st); return (CLIENT_SUCCESS); } /* * If service has gone into maintenance then * we will time out anyway, so we are better * off returning now */ if (check_maint && strcmp(st, SCF_STATE_STRING_MAINT) == 0) { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s\n", what, fmri, gettext("maintenance")); free(st); return (CLIENT_ERR_MAINTENANCE); } free(st); } else { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s: %s\n", what, fmri, gettext("failed"), scf_strerror(scf_error())); return (CLIENT_ERR_FAIL); } } /* Timed out waiting */ if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s\n", what, fmri, gettext("timed out")); return (CLIENT_ERR_TIMEDOUT); } static boolean_t is_service(const char *fmri, const char *state) { char *st; boolean_t result = B_FALSE; if ((st = smf_get_state(fmri)) != NULL) { if (strcmp(st, state) == 0) result = B_TRUE; free(st); } return (result); } /* * * get_timeout_val : returns the timeout value set in fmri manifest * inputs : action(start/stop) * fmri(defined fmri string) * Returns default if error, the timeout val otherwise * */ static useconds_t get_timeout_value(int dowhat, const char *fmri, useconds_t default_val) { scf_simple_prop_t *sp = NULL; uint64_t *cp = NULL; int timeout = default_val/1000000; char *action = NULL; const char *actionstr = NULL; switch (dowhat) { case START_SERVICE: case RESTART_SERVICE: action = "start"; actionstr = gettext("start"); break; case STOP_SERVICE: action = "stop"; actionstr = gettext("stop"); break; default: assert(0); } sp = scf_simple_prop_get(NULL, fmri, action, SCF_PROPERTY_TIMEOUT); if (sp == NULL) { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s: %s\n", actionstr, fmri, gettext("failed to retrieve timeout property"), scf_strerror(scf_error())); return (default_val); } cp = scf_simple_prop_next_count(sp); if (cp == NULL) { if (mode_verbose) CLIENT_FPRINTF(stderr, "%s: %s... %s: %s\n", actionstr, fmri, gettext("failed to retrieve timeout value"), scf_strerror(scf_error())); scf_simple_prop_free(sp); return (default_val); } if (*cp != 0) timeout = *cp; scf_simple_prop_free(sp); return (timeout * 1000000); }