/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * This file contains miscellaneous routines. */ #include "global.h" #include #include #include #include #include #include #include #include #include #include #include #include #include "misc.h" #include "analyze.h" #include "label.h" #include "startup.h" #ifdef __STDC__ /* Function prototypes for ANSI C Compilers */ static void cleanup(int sig); #else /* __STDC__ */ /* Function prototypes for non-ANSI C Compilers */ static void cleanup(); #endif /* __STDC__ */ struct env *current_env = NULL; /* ptr to current environment */ static int stop_pending = 0; /* ctrl-Z is pending */ struct ttystate ttystate; /* tty info */ static int aborting = 0; /* in process of aborting */ /* * For 4.x, limit the choices of valid disk names to this set. */ static char *disk_4x_identifiers[] = { "sd", "id"}; #define N_DISK_4X_IDS (sizeof (disk_4x_identifiers)/sizeof (char *)) /* * This is the list of legal inputs for all yes/no questions. */ char *confirm_list[] = { "yes", "no", NULL, }; /* * This routine is a wrapper for malloc. It allocates pre-zeroed space, * and checks the return value so the caller doesn't have to. */ void * zalloc(count) int count; { void *ptr; if ((ptr = (void *) calloc(1, (unsigned)count)) == NULL) { err_print("Error: unable to calloc more space.\n"); fullabort(); } return (ptr); } /* * This routine is a wrapper for realloc. It reallocates the given * space, and checks the return value so the caller doesn't have to. * Note that the any space added by this call is NOT necessarily * zeroed. */ void * rezalloc(ptr, count) void *ptr; int count; { void *new_ptr; if ((new_ptr = (void *) realloc((char *)ptr, (unsigned)count)) == NULL) { err_print("Error: unable to realloc more space.\n"); fullabort(); } return (new_ptr); } /* * This routine is a wrapper for free. */ void destroy_data(data) char *data; { free((char *)data); } #ifdef not /* * This routine takes the space number returned by an ioctl call and * returns a mnemonic name for that space. */ char * space2str(space) uint_t space; { char *name; switch (space&SP_BUSMASK) { case SP_VIRTUAL: name = "virtual"; break; case SP_OBMEM: name = "obmem"; break; case SP_OBIO: name = "obio"; break; case SP_MBMEM: name = "mbmem"; break; case SP_MBIO: name = "mbio"; break; default: err_print("Error: unknown address space type encountered.\n"); fullabort(); } return (name); } #endif /* not */ /* * This routine asks the user the given yes/no question and returns * the response. */ int check(question) char *question; { int answer; u_ioparam_t ioparam; /* * If we are running out of a command file, assume a yes answer. */ if (option_f) return (0); /* * Ask the user. */ ioparam.io_charlist = confirm_list; answer = input(FIO_MSTR, question, '?', &ioparam, (int *)NULL, DATA_INPUT); return (answer); } /* * This routine aborts the current command. It is called by a ctrl-C * interrupt and also under certain error conditions. */ /*ARGSUSED*/ void cmdabort(sig) int sig; { /* * If there is no usable saved environment, gracefully exit. This * allows the user to interrupt the program even when input is from * a file, or if there is no current menu, like at the "Select disk:" * prompt. */ if (current_env == NULL || !(current_env->flags & ENV_USE)) fullabort(); /* * If we are in a critical zone, note the attempt and return. */ if (current_env->flags & ENV_CRITICAL) { current_env->flags |= ENV_ABORT; return; } /* * All interruptions when we are running out of a command file * cause the program to gracefully exit. */ if (option_f) fullabort(); fmt_print("\n"); /* * Clean up any state left by the interrupted command. */ cleanup(sig); /* * Jump to the saved environment. */ longjmp(current_env->env, 0); } /* * This routine implements the ctrl-Z suspend mechanism. It is called * when a suspend signal is received. */ /*ARGSUSED*/ void onsusp(sig) int sig; { int fix_term; #ifdef NOT_DEF sigset_t sigmask; #endif /* NOT_DEF */ /* * If we are in a critical zone, note the attempt and return. */ if (current_env != NULL && current_env->flags & ENV_CRITICAL) { stop_pending = 1; return; } /* * If the terminal is mucked up, note that we will need to * re-muck it when we start up again. */ fix_term = ttystate.ttyflags; fmt_print("\n"); /* * Clean up any state left by the interrupted command. */ cleanup(sig); #ifdef NOT_DEF /* Investigate whether all this is necessary */ /* * Stop intercepting the suspend signal, then send ourselves one * to cause us to stop. */ sigmask.sigbits[0] = (ulong_t)0xffffffff; if (sigprocmask(SIG_SETMASK, &sigmask, (sigset_t *)NULL) == -1) err_print("sigprocmask failed %d\n", errno); #endif /* NOT_DEF */ (void) signal(SIGTSTP, SIG_DFL); (void) kill(0, SIGTSTP); /* * PC stops here */ /* * We are started again. Set us up to intercept the suspend * signal once again. */ (void) signal(SIGTSTP, onsusp); /* * Re-muck the terminal if necessary. */ if (fix_term & TTY_ECHO_OFF) echo_off(); if (fix_term & TTY_CBREAK_ON) charmode_on(); } /* * This routine implements the timing function used during long-term * disk operations (e.g. formatting). It is called when an alarm signal * is received. */ /*ARGSUSED*/ void onalarm(sig) int sig; { } /* * This routine gracefully exits the program. */ void fullabort() { fmt_print("\n"); /* * Clean up any state left by an interrupted command. * Avoid infinite loops caused by a clean-up * routine failing again... */ if (!aborting) { aborting = 1; cleanup(SIGKILL); } exit(1); /*NOTREACHED*/ } /* * This routine cleans up the state of the world. It is a hodge-podge * of kludges to allow us to interrupt commands whenever possible. * * Some cleanup actions may depend on the type of signal. */ static void cleanup(int sig) { /* * Lock out interrupts to avoid recursion. */ enter_critical(); /* * Fix up the tty if necessary. */ if (ttystate.ttyflags & TTY_CBREAK_ON) { charmode_off(); } if (ttystate.ttyflags & TTY_ECHO_OFF) { echo_on(); } /* * If the defect list is dirty, write it out. */ if (cur_list.flags & LIST_DIRTY) { cur_list.flags = 0; if (!EMBEDDED_SCSI) write_deflist(&cur_list); } /* * If the label is dirty, write it out. */ if (cur_flags & LABEL_DIRTY) { cur_flags &= ~LABEL_DIRTY; (void) write_label(); } /* * If we are logging and just interrupted a scan, print out * some summary info to the log file. */ if (log_file && scan_cur_block >= 0) { pr_dblock(log_print, scan_cur_block); log_print("\n"); } if (scan_blocks_fixed >= 0) fmt_print("Total of %lld defective blocks repaired.\n", scan_blocks_fixed); if (sig != SIGSTOP) { /* Don't reset on suspend (converted to stop) */ scan_cur_block = scan_blocks_fixed = -1; } exit_critical(); } /* * This routine causes the program to enter a critical zone. Within the * critical zone, no interrupts are allowed. Note that calls to this * routine for the same environment do NOT nest, so there is not * necessarily pairing between calls to enter_critical() and exit_critical(). */ void enter_critical() { /* * If there is no saved environment, interrupts will be ignored. */ if (current_env == NULL) return; /* * Mark the environment to be in a critical zone. */ current_env->flags |= ENV_CRITICAL; } /* * This routine causes the program to exit a critical zone. Note that * calls to enter_critical() for the same environment do NOT nest, so * one call to exit_critical() will erase any number of such calls. */ void exit_critical() { /* * If there is a saved environment, mark it to be non-critical. */ if (current_env != NULL) current_env->flags &= ~ENV_CRITICAL; /* * If there is a stop pending, execute the stop. */ if (stop_pending) { stop_pending = 0; onsusp(SIGSTOP); } /* * If there is an abort pending, execute the abort. */ if (current_env == NULL) return; if (current_env->flags & ENV_ABORT) { current_env->flags &= ~ENV_ABORT; cmdabort(SIGINT); } } /* * This routine turns off echoing on the controlling tty for the program. */ void echo_off() { /* * Open the tty and store the file pointer for later. */ if (ttystate.ttyflags == 0) { if ((ttystate.ttyfile = open("/dev/tty", O_RDWR | O_NDELAY)) < 0) { err_print("Unable to open /dev/tty.\n"); fullabort(); } } /* * Get the parameters for the tty, turn off echoing and set them. */ if (tcgetattr(ttystate.ttyfile, &ttystate.ttystate) < 0) { err_print("Unable to get tty parameters.\n"); fullabort(); } ttystate.ttystate.c_lflag &= ~ECHO; if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { err_print("Unable to set tty to echo off state.\n"); fullabort(); } /* * Remember that we've successfully turned * ECHO mode off, so we know to fix it later. */ ttystate.ttyflags |= TTY_ECHO_OFF; } /* * This routine turns on echoing on the controlling tty for the program. */ void echo_on() { /* * Using the saved parameters, turn echoing on and set them. */ ttystate.ttystate.c_lflag |= ECHO; if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { err_print("Unable to set tty to echo on state.\n"); fullabort(); } /* * Close the tty and mark it ok again. */ ttystate.ttyflags &= ~TTY_ECHO_OFF; if (ttystate.ttyflags == 0) { (void) close(ttystate.ttyfile); } } /* * This routine turns off single character entry mode for tty. */ void charmode_on() { /* * If tty unopened, open the tty and store the file pointer for later. */ if (ttystate.ttyflags == 0) { if ((ttystate.ttyfile = open("/dev/tty", O_RDWR | O_NDELAY)) < 0) { err_print("Unable to open /dev/tty.\n"); fullabort(); } } /* * Get the parameters for the tty, turn on char mode. */ if (tcgetattr(ttystate.ttyfile, &ttystate.ttystate) < 0) { err_print("Unable to get tty parameters.\n"); fullabort(); } ttystate.vmin = ttystate.ttystate.c_cc[VMIN]; ttystate.vtime = ttystate.ttystate.c_cc[VTIME]; ttystate.ttystate.c_lflag &= ~ICANON; ttystate.ttystate.c_cc[VMIN] = 1; ttystate.ttystate.c_cc[VTIME] = 0; if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { err_print("Unable to set tty to cbreak on state.\n"); fullabort(); } /* * Remember that we've successfully turned * CBREAK mode on, so we know to fix it later. */ ttystate.ttyflags |= TTY_CBREAK_ON; } /* * This routine turns on single character entry mode for tty. * Note, this routine must be called before echo_on. */ void charmode_off() { /* * Using the saved parameters, turn char mode on. */ ttystate.ttystate.c_lflag |= ICANON; ttystate.ttystate.c_cc[VMIN] = ttystate.vmin; ttystate.ttystate.c_cc[VTIME] = ttystate.vtime; if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { err_print("Unable to set tty to cbreak off state.\n"); fullabort(); } /* * Close the tty and mark it ok again. */ ttystate.ttyflags &= ~TTY_CBREAK_ON; if (ttystate.ttyflags == 0) { (void) close(ttystate.ttyfile); } } /* * Allocate space for and return a pointer to a string * on the stack. If the string is null, create * an empty string. * Use destroy_data() to free when no longer used. */ char * alloc_string(s) char *s; { char *ns; if (s == (char *)NULL) { ns = (char *)zalloc(1); } else { ns = (char *)zalloc(strlen(s) + 1); (void) strcpy(ns, s); } return (ns); } /* * This function can be used to build up an array of strings * dynamically, with a trailing NULL to terminate the list. * * Parameters: * argvlist: a pointer to the base of the current list. * does not have to be initialized. * size: pointer to an integer, indicating the number * of string installed in the list. Must be * initialized to zero. * alloc: pointer to an integer, indicating the amount * of space allocated. Must be initialized to * zero. For efficiency, we allocate the list * in chunks and use it piece-by-piece. * str: the string to be inserted in the list. * A copy of the string is malloc'ed, and * appended at the end of the list. * Returns: * a pointer to the possibly-moved argvlist. * * No attempt to made to free unused memory when the list is * completed, although this would not be hard to do. For * reasonably small lists, this should suffice. */ #define INITIAL_LISTSIZE 32 #define INCR_LISTSIZE 32 char ** build_argvlist(argvlist, size, alloc, str) char **argvlist; int *size; int *alloc; char *str; { if (*size + 2 > *alloc) { if (*alloc == 0) { *alloc = INITIAL_LISTSIZE; argvlist = (char **) zalloc(sizeof (char *) * (*alloc)); } else { *alloc += INCR_LISTSIZE; argvlist = (char **) rezalloc((void *) argvlist, sizeof (char *) * (*alloc)); } } argvlist[*size] = alloc_string(str); *size += 1; argvlist[*size] = NULL; return (argvlist); } /* * Useful parsing macros */ #define must_be(s, c) if (*s++ != c) return (0) #define skip_digits(s) while (isdigit(*s)) s++ /* Parsing macro below is created to handle fabric devices which contains */ /* upper hex digits like c2t210000203708B8CEd0s0. */ /* To get the target id(tid) the digit and hex upper digit need to */ /* be processed. */ #define skip_digit_or_hexupper(s) while (isdigit(*s) || \ (isxdigit(*s) && isupper(*s))) s++ /* * Return true if a device name matches the conventions * for the particular system. */ int conventional_name(char *name) { must_be(name, 'c'); skip_digits(name); if (*name == 't') { name++; skip_digit_or_hexupper(name); } must_be(name, 'd'); skip_digits(name); must_be(name, 's'); skip_digits(name); return (*name == 0); } /* * Return true if a device name matches the intel physical name conventions * for the particular system. */ int fdisk_physical_name(char *name) { must_be(name, 'c'); skip_digits(name); if (*name == 't') { name++; skip_digit_or_hexupper(name); } must_be(name, 'd'); skip_digits(name); must_be(name, 'p'); skip_digits(name); return (*name == 0); } /* * Return true if a device name matches the conventions * for a "whole disk" name for the particular system. * The name in this case must match exactly that which * would appear in the device directory itself. */ int whole_disk_name(name) char *name; { must_be(name, 'c'); skip_digits(name); if (*name == 't') { name++; skip_digit_or_hexupper(name); } must_be(name, 'd'); skip_digits(name); must_be(name, 's'); must_be(name, '2'); return (*name == 0); } /* * Return true if a name is in the internal canonical form */ int canonical_name(name) char *name; { must_be(name, 'c'); skip_digits(name); if (*name == 't') { name++; skip_digit_or_hexupper(name); } must_be(name, 'd'); skip_digits(name); return (*name == 0); } /* * Return true if a name is in the internal canonical form for 4.x * Used to support 4.x naming conventions under 5.0. */ int canonical4x_name(name) char *name; { char **p; int i; p = disk_4x_identifiers; for (i = N_DISK_4X_IDS; i > 0; i--, p++) { if (match_substr(name, *p)) { name += strlen(*p); break; } } if (i == 0) return (0); skip_digits(name); return (*name == 0); } /* * Map a conventional name into the internal canonical form: * * /dev/rdsk/c0t0d0s0 -> c0t0d0 */ void canonicalize_name(dst, src) char *dst; char *src; { char *s; /* * Copy from the 'c' to the end to the destination string... */ s = strchr(src, 'c'); if (s != NULL) { (void) strcpy(dst, s); /* * Remove the trailing slice (partition) reference */ s = dst + strlen(dst) - 2; if (*s == 's') { *s = 0; } } else { *dst = 0; /* be tolerant of garbage input */ } } /* * Return true if we find an occurance of s2 at the * beginning of s1. We don't have to match all of * s1, but we do have to match all of s2 */ int match_substr(s1, s2) char *s1; char *s2; { while (*s2 != 0) { if (*s1++ != *s2++) return (0); } return (1); } /* * Dump a structure in hexadecimal, for diagnostic purposes */ #define BYTES_PER_LINE 16 void dump(hdr, src, nbytes, format) char *hdr; caddr_t src; int nbytes; int format; { int i; int n; char *p; char s[256]; assert(format == HEX_ONLY || format == HEX_ASCII); (void) strcpy(s, hdr); for (p = s; *p; p++) { *p = ' '; } p = hdr; while (nbytes > 0) { err_print("%s", p); p = s; n = min(nbytes, BYTES_PER_LINE); for (i = 0; i < n; i++) { err_print("%02x ", src[i] & 0xff); } if (format == HEX_ASCII) { for (i = BYTES_PER_LINE-n; i > 0; i--) { err_print(" "); } err_print(" "); for (i = 0; i < n; i++) { err_print("%c", isprint(src[i]) ? src[i] : '.'); } } err_print("\n"); nbytes -= n; src += n; } } float bn2mb(uint64_t nblks) { float n; n = (float)nblks / 1024.0; return ((n / 1024.0) * DEV_BSIZE); } uint_t mb2bn(float mb) { uint_t n; n = (uint_t)(mb * 1024.0 * (1024.0 / DEV_BSIZE)); return (n); } float bn2gb(uint64_t nblks) { float n; n = (float)nblks / (1024.0 * 1024.0); return ((n/1024.0) * DEV_BSIZE); } float bn2tb(uint64_t nblks) { float n; n = (float)nblks / (1024.0 * 1024.0 * 1024.0); return ((n/1024.0) * DEV_BSIZE); } uint_t gb2bn(float gb) { uint_t n; n = (uint_t)(gb * 1024.0 * 1024.0 * (1024.0 / DEV_BSIZE)); return (n); } /* * This routine finds out the number of lines (rows) in a terminal * window. The default value of TTY_LINES is returned on error. */ int get_tty_lines() { int tty_lines = TTY_LINES; struct winsize winsize; if ((option_f == (char *)NULL) && isatty(0) == 1 && isatty(1) == 1) { /* * We have a real terminal for std input and output */ winsize.ws_row = 0; if (ioctl(1, TIOCGWINSZ, &winsize) == 0) { if (winsize.ws_row > 2) { /* * Should be atleast 2 lines, for division * by (tty_lines - 1, tty_lines - 2) to work. */ tty_lines = winsize.ws_row; } } } return (tty_lines); }