# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2010 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # Definitions common to command source. # # include global definitions; SRC should be defined in the shell. # SRC is needed until RFE 1026993 is implemented. include $(SRC)/Makefile.master LN= ln SH= sh ECHO= echo MKDIR= mkdir TOUCH= touch FILEMODE= 0555 LIBFILEMODE= 0444 XPG4= $(XPG4PROG:%=%.xpg4) XPG6= $(XPG6PROG:%=%.xpg6) KRB5DIR= $(ROOT)/usr KRB5BIN= $(KRB5DIR)/bin KRB5SBIN= $(KRB5DIR)/sbin KRB5LIB= $(KRB5DIR)/lib/krb5 KRB5RUNPATH= /usr/lib/krb5 GSSRUNPATH= /usr/lib/gss ROOTBIN= $(ROOT)/usr/bin ROOTLIB= $(ROOT)/usr/lib ROOTLIBSVCBIN= $(ROOT)/lib/svc/bin ROOTLIBSVCMETHOD= $(ROOT)/lib/svc/method ROOTLIBXEN= $(ROOT)/usr/lib/xen/bin ROOTLIBZONES= $(ROOT)/lib/zones ROOTSHLIB= $(ROOT)/usr/share/lib ROOTPKGBIN= $(ROOT)/usr/sadm/install/bin ROOTCLASS_SCR_DIR= $(ROOT)/usr/sadm/install/scripts ROOTADMIN_SRC_DIR= $(ROOT)/var/sadm/install/admin ROOTSHLIBCCS= $(ROOTSHLIB)/ccs ROOTSBIN= $(ROOT)/sbin ROOTUSRSBIN= $(ROOT)/usr/sbin ROOTETC= $(ROOT)/etc ROOTETCSECURITY= $(ROOTETC)/security ROOTETCTSOL= $(ROOTETCSECURITY)/tsol ROOTETCSECLIB= $(ROOTETCSECURITY)/lib ROOTETCZONES= $(ROOTETC)/zones ROOTETCINET= $(ROOT)/etc/inet ROOTCCSBIN= $(ROOT)/usr/ccs/bin ROOTCCSBIN64= $(ROOTCCSBIN)/$(MACH64) ROOTCCSBINLINKDIR= $(ROOT)/../../bin ROOTCCSBINLINKDIR64= $(ROOT)../../../bin/$(MACH) ROOTUSRKVM= $(ROOT)/usr/kvm ROOTHAS= $(ROOT)/usr/has ROOTHASBIN= $(ROOT)/usr/has/bin ROOTHASLIB= $(ROOT)/usr/has/lib ROOTXPG4= $(ROOT)/usr/xpg4 ROOTXPG4BIN= $(ROOT)/usr/xpg4/bin ROOTXPG4BIN32= $(ROOTXPG4BIN)/$(MACH32) ROOTXPG4BIN64= $(ROOTXPG4BIN)/$(MACH64) ROOTXPG6= $(ROOT)/usr/xpg6 ROOTXPG6BIN= $(ROOT)/usr/xpg6/bin ROOTLOCALEDEF= $(ROOT)/usr/lib/localedef ROOTCHARMAP= $(ROOTLOCALEDEF)/charmap ROOTI18NEXT= $(ROOTLOCALEDEF)/extensions ROOTI18NEXT64= $(ROOTLOCALEDEF)/extensions/$(MACH64) ROOTBIN32= $(ROOTBIN)/$(MACH32) ROOTBIN64= $(ROOTBIN)/$(MACH64) ROOTCMDDIR64= $(ROOTCMDDIR)/$(MACH64) ROOTLIB64= $(ROOTLIB)/$(MACH64) ROOTUSRSBIN32= $(ROOTUSRSBIN)/$(MACH32) ROOTUSRSBIN64= $(ROOTUSRSBIN)/$(MACH64) ROOTMAN= $(ROOT)/usr/share/man ROOTMAN1= $(ROOTMAN)/man1 ROOTMAN1M= $(ROOTMAN)/man1m ROOTMAN3= $(ROOTMAN)/man3 ROOTVARSMB= $(ROOT)/var/smb # # Like ROOTLIBDIR in $(SRC)/Makefile.lib, any lower-level Makefiles that # put their binaries in a non-standard location should reset this and use # $(ROOTCMD) in their `install' target. By default we set this to a bogus # value so that it will not conflict with any of the other values already # defined in this Makefile. # ROOTCMDDIR= $(ROOT)/__nonexistent_directory__ ROOTSHAUDIO= $(ROOT)/usr/share/audio ROOTAUDIOSAMP= $(ROOTSHAUDIO)/samples ROOTAUDIOSAMPAU=$(ROOTAUDIOSAMP)/au ISAEXEC= $(ROOT)/usr/lib/isaexec PLATEXEC= $(ROOT)/usr/lib/platexec LDLIBS = $(LDLIBS.cmd) LDFLAGS.cmd = \ $(BDIRECT) $(ENVLDFLAGS1) $(ENVLDFLAGS2) $(ENVLDFLAGS3) \ $(MAPFILE.NES:%=-M%) $(MAPFILE.PGA:%=-M%) $(MAPFILE.NED:%=-M%) LDFLAGS = $(LDFLAGS.cmd) LINTFLAGS= -axsm LINTFLAGS64= -axsm -m64 LINTOUT= lint.out KRB5PROG= $(PROG:%=$(KRB5BIN)/%) KRB5SBINPROG= $(PROG:%=$(KRB5SBIN)/%) KRB5LIBPROG= $(PROG:%=$(KRB5LIB)/%) ROOTPROG= $(PROG:%=$(ROOTBIN)/%) ROOTCMD= $(PROG:%=$(ROOTCMDDIR)/%) ROOTSHFILES= $(SHFILES:%=$(ROOTBIN)/%) ROOTLIBPROG= $(PROG:%=$(ROOTLIB)/%) ROOTLIBSHFILES= $(SHFILES:%=$(ROOTLIB)/%) ROOTSHLIBPROG= $(PROG:%=$(ROOTSHLIB)/%) ROOTSBINPROG= $(PROG:%=$(ROOTSBIN)/%) ROOTPKGBINPROG= $(PROG:%=$(ROOTPKGBIN)/%) ROOTCLASS_SCR_FILES= $(SCRIPTS:%=$(ROOTCLASS_SCR_DIR)/%) ROOTUSRSBINPROG=$(PROG:%=$(ROOTUSRSBIN)/%) ROOTUSRSBINSCRIPT=$(SCRIPT:%=$(ROOTUSRSBIN)/%) ROOTETCPROG= $(PROG:%=$(ROOTETC)/%) ROOTHASBINPROG= $(PROG:%=$(ROOTHASBIN)/%) ROOTHASLIBPROG= $(PROG:%=$(ROOTHASLIB)/%) ROOTCCSBINPROG= $(PROG:%=$(ROOTCCSBIN)/%) ROOTCCSBINPROG64= $(PROG:%=$(ROOTCCSBIN64)/%) ROOTCCSBINLINK=$(PROG:%= $(ROOTCCSBINLINKDIR)/%) ROOTCCSBINLINK64=$(PROG:%=$(ROOTCCSBINLINKDIR64)/%) ROOTUSRKVMPROG= $(PROG:%=$(ROOTUSRKVM)/%) ROOTXPG4PROG= $(XPG4PROG:%=$(ROOTXPG4BIN)/%) ROOTXPG4PROG32= $(XPG4PROG:%=$(ROOTXPG4BIN32)/%) ROOTXPG4PROG64= $(XPG4PROG:%=$(ROOTXPG4BIN64)/%) ROOTXPG6PROG= $(XPG6PROG:%=$(ROOTXPG6BIN)/%) ROOTLOCALEPROG= $(PROG:%=$(ROOTLOCALEDEF)/%) ROOTPROG64= $(PROG:%=$(ROOTBIN64)/%) ROOTPROG32= $(PROG:%=$(ROOTBIN32)/%) ROOTCMD64= $(PROG:%=$(ROOTCMDDIR64)/%) ROOTUSRSBINPROG32= $(PROG:%=$(ROOTUSRSBIN32)/%) ROOTUSRSBINPROG64= $(PROG:%=$(ROOTUSRSBIN64)/%) ROOTMAN1FILES= $(MAN1FILES:%=$(ROOTMAN1)/%) $(ROOTMAN1FILES) := FILEMODE= 444 ROOTMAN1MFILES= $(MAN1MFILES:%=$(ROOTMAN1M)/%) $(ROOTMAN1MFILES) := FILEMODE= 444 ROOTMAN3FILES= $(MAN3FILES:%=$(ROOTMAN3)/%) $(ROOTMAN3FILES) := FILEMODE= 444 # Symlink rules for /usr/ccs/bin commands. Note, those commands under # the rule of the linker area, are controlled by a different set of # rules defined in $(SRC)/cmd/sgs/Makefile.var. INS.ccsbinlink= \ $(RM) $(ROOTCCSBINPROG); \ $(SYMLINK) ../../bin/$(PROG) $(ROOTCCSBINPROG) INS.ccsbinlink64= \ $(RM) $(ROOTCCSBINPROG64); \ $(SYMLINK) ../../../bin/$(MACH64)/$(PROG) $(ROOTCCSBINPROG64) ROOTETCDEFAULT= $(ROOTETC)/default ROOTETCDEFAULTFILES= $(DEFAULTFILES:%.dfl=$(ROOTETCDEFAULT)/%) $(ROOTETCDEFAULTFILES) := FILEMODE = 0644 ROOTETCSECFILES= $(ETCSECFILES:%=$(ROOTETCSECURITY)/%) $(ROOTETCSECFILES) := FILEMODE = 0644 ROOTETCTSOLFILES= $(ETCTSOLFILES:%=$(ROOTETCTSOL)/%) $(ROOTETCTSOLFILES) := FILEMODE = 0644 ROOTETCSECLIBFILES= $(ETCSECLIBFILES:%=$(ROOTETCSECLIB)/%) ROOTETCZONESFILES= $(ETCZONESFILES:%=$(ROOTETCZONES)/%) $(ROOTETCZONESFILES) := FILEMODE = 0444 ROOTLIBZONESFILES= $(LIBZONESFILES:%=$(ROOTLIBZONES)/%) $(ROOTLIBZONESFILES) := FILEMODE = 0555 ROOTADMIN_SRC_FILE= $(ADMINFILE:%=$(ROOTADMIN_SRC_DIR)/%) $(ROOTADMIN_SRC_FILE) := FILEMODE = 0444 # # Directories for smf(5) service manifests and profiles. # ROOTSVC= $(ROOT)/lib/svc ROOTETCSVC= $(ROOT)/etc/svc ROOTSVCMANIFEST= $(ROOTSVC)/manifest ROOTSVCPROFILE= $(ROOTETCSVC)/profile ROOTSVCMILESTONE= $(ROOTSVCMANIFEST)/milestone ROOTSVCDEVICE= $(ROOTSVCMANIFEST)/device ROOTSVCSYSTEM= $(ROOTSVCMANIFEST)/system ROOTSVCSYSTEMDEVICE= $(ROOTSVCSYSTEM)/device ROOTSVCSYSTEMFILESYSTEM= $(ROOTSVCSYSTEM)/filesystem ROOTSVCSYSTEMSECURITY= $(ROOTSVCSYSTEM)/security ROOTSVCNETWORK= $(ROOTSVCMANIFEST)/network ROOTSVCNETWORKDNS= $(ROOTSVCNETWORK)/dns ROOTSVCNETWORKISCSI= $(ROOTSVCNETWORK)/iscsi ROOTSVCNETWORKLDAP= $(ROOTSVCNETWORK)/ldap ROOTSVCNETWORKNFS= $(ROOTSVCNETWORK)/nfs ROOTSVCNETWORKNIS= $(ROOTSVCNETWORK)/nis ROOTSVCNETWORKROUTING= $(ROOTSVCNETWORK)/routing ROOTSVCNETWORKRPC= $(ROOTSVCNETWORK)/rpc ROOTSVCNETWORKSMB= $(ROOTSVCNETWORK)/smb ROOTSVCNETWORKSECURITY= $(ROOTSVCNETWORK)/security ROOTSVCNETWORKSSL= $(ROOTSVCNETWORK)/ssl ROOTSVCNETWORKIPSEC= $(ROOTSVCNETWORK)/ipsec ROOTSVCNETWORKSHARES= $(ROOTSVCNETWORK)/shares ROOTSVCSMB= $(ROOTSVCNETWORK)/smb ROOTSVCPLATFORM= $(ROOTSVCMANIFEST)/platform ROOTSVCPLATFORMSUN4U= $(ROOTSVCPLATFORM)/sun4u ROOTSVCPLATFORMSUN4V= $(ROOTSVCPLATFORM)/sun4v ROOTSVCAPPLICATION= $(ROOTSVCMANIFEST)/application ROOTSVCAPPLICATIONMANAGEMENT= $(ROOTSVCAPPLICATION)/management ROOTSVCAPPLICATIONSECURITY= $(ROOTSVCAPPLICATION)/security ROOTSVCAPPLICATIONPRINT= $(ROOTSVCAPPLICATION)/print # # Commands Makefiles delivering a manifest are expected to define MANIFEST. # # Like ROOTCMDDIR, any lower-level Makefiles that put their manifests in a # subdirectory of the manifest directories listed above should reset # ROOTMANIFESTDIR and use it in their `install' target. By default we set this # to a bogus value so that it will not conflict with any of the other values # already defined in this Makefile. # # The manifest validation of the $SRC/cmd check target is also derived from a # valid MANIFEST setting. # ROOTMANIFESTDIR= $(ROOTSVCMANIFEST)/__nonexistent_directory__ ROOTMANIFEST= $(MANIFEST:%=$(ROOTMANIFESTDIR)/%) CHKMANIFEST= $(MANIFEST:%.xml=%.xmlchk) # Manifests cannot be checked in parallel, because we are using the global # repository that is in $(SRC)/cmd/svc/seed/global.db. This is a # repository that is built from the manifests in this workspace, whereas # the build machine's repository may be out of sync with these manifests. # Because we are using a private repository, svccfg-native must start up a # private copy of configd-native. We cannot have multiple copies of # configd-native trying to access global.db simultaneously. .NO_PARALLEL: $(CHKMANIFEST) # # For installing "starter scripts" of services # ROOTSVCMETHOD= $(SVCMETHOD:%=$(ROOTLIBSVCMETHOD)/%) ROOTSVCBINDIR= $(ROOTLIBSVCBIN)/__nonexistent_directory__ ROOTSVCBIN= $(SVCBIN:%=$(ROOTSVCBINDIR)/%) # # For programs that are installed in the root filesystem, # build $(ROOTFS_PROG) rather than $(PROG) $(ROOTFS_PROG) := LDFLAGS += -Wl,-I/lib/ld.so.1 $(KRB5BIN)/%: % $(INS.file) $(KRB5SBIN)/%: % $(INS.file) $(KRB5LIB)/%: % $(INS.file) $(ROOTBIN)/%: % $(INS.file) $(ROOTLIB)/%: % $(INS.file) $(ROOTBIN64)/%: % $(INS.file) $(ROOTLIB64)/%: % $(INS.file) $(ROOTBIN32)/%: % $(INS.file) $(ROOTSHLIB)/%: % $(INS.file) $(ROOTPKGBIN)/%: % $(INS.file) $(ROOTCLASS_SCR_DIR)/%: % $(INS.file) $(ROOTADMIN_SRC_DIR)/%: % $(INS.file) $(ROOTSBIN)/%: % $(INS.file) $(ROOTUSRSBIN)/%: % $(INS.file) $(ROOTUSRSBIN32)/%: % $(INS.file) $(ROOTUSRSBIN64)/%: % $(INS.file) $(ROOTETC)/%: % $(INS.file) $(ROOTETCINET)/%: % $(INS.file) $(ROOTETCDEFAULT)/%: %.dfl $(INS.rename) $(ROOTETCTSOL)/%: % $(INS.file) $(ROOTETCSECLIB)/%: % $(INS.file) $(ROOTETCZONES)/%: % $(INS.file) $(ROOTLIBZONES)/%: % $(INS.file) $(ROOTLIBXEN)/%: % $(INS.file) $(ROOTHASBIN)/%: % $(INS.file) $(ROOTHASLIB)/%: % $(INS.file) $(ROOTUSRKVM)/%: % $(INS.file) $(ROOTXPG4BIN)/%: %.xpg4 $(INS.rename) $(ROOTXPG4BIN32)/%: %.xpg4 $(INS.rename) $(ROOTXPG4BIN64)/%: %.xpg4 $(INS.rename) $(ROOTXPG6BIN)/%: %.xpg6 $(INS.rename) $(ROOTLOCALEDEF)/%: % $(INS.file) $(ROOTCHARMAP)/%: % $(INS.file) $(ROOTI18NEXT)/%: % $(INS.file) $(ROOTI18NEXT64)/%: % $(INS.file) $(ROOTLIBSVCMETHOD)/%: % $(INS.file) $(ROOTLIBSVCBIN)/%: % $(INS.file) $(ROOTSVCMILESTONE)/%: % $(INS.file) $(ROOTSVCDEVICE)/%: % $(INS.file) $(ROOTSVCSYSTEM)/%: % $(INS.file) $(ROOTSVCSYSTEMDEVICE)/%: % $(INS.file) $(ROOTSVCSYSTEMFILESYSTEM)/%: % $(INS.file) $(ROOTSVCSYSTEMSECURITY)/%: % $(INS.file) $(ROOTSVCNETWORK)/%: % $(INS.file) $(ROOTSVCNETWORKLDAP)/%: % $(INS.file) $(ROOTSVCNETWORKNFS)/%: % $(INS.file) $(ROOTSVCNETWORKNIS)/%: % $(INS.file) $(ROOTSVCNETWORKRPC)/%: % $(INS.file) $(ROOTSVCNETWORKSECURITY)/%: % $(INS.file) $(ROOTSVCNETWORKSSL)/%: % $(INS.file) $(ROOTSVCNETWORKIPSEC)/%: % $(INS.file) $(ROOTSVCNETWORKSHARES)/%: % $(INS.file) $(ROOTSVCNETWORKSMB)/%: % $(INS.file) $(ROOTSVCAPPLICATION)/%: % $(INS.file) $(ROOTSVCAPPLICATIONMANAGEMENT)/%: % $(INS.file) $(ROOTSVCAPPLICATIONSECURITY)/%: % $(INS.file) $(ROOTSVCAPPLICATIONPRINT)/%: % $(INS.file) $(ROOTSVCPLATFORM)/%: % $(INS.file) $(ROOTSVCPLATFORMSUN4U)/%: % $(INS.file) $(ROOTSVCPLATFORMSUN4V)/%: % $(INS.file) # Install rule for gprof, yacc, and lex dependency files $(ROOTSHLIBCCS)/%: ../common/% $(INS.file) $(ROOTCCSBINLINKDIR)/%: % $(INS.ccsbinlink) $(ROOTCCSBINLINKDIR64)/%: % $(INS.ccsbinlink64) $(ROOTMAN1)/%: %.sunman $(INS.rename) $(ROOTMAN1M)/%: %.sunman $(INS.rename) $(ROOTMAN3)/%: %.sunman $(INS.rename) $(ROOTVARSMB)/%: % $(INS.file) # build rule for statically linked programs with single source file. %.static: %.c $(LINK.c) -o $@ $< $(LDLIBS) $(POST_PROCESS) %.xpg4: %.c $(LINK.c) -o $@ $< $(LDLIBS) $(POST_PROCESS) %.xpg6: %.c $(LINK.c) -o $@ $< $(LDLIBS) $(POST_PROCESS) # Define the majority text domain in this directory. TEXT_DOMAIN= SUNW_OST_OSCMD CLOBBERFILES += $(XPG4) $(XPG6) $(DCFILE) # This flag is being added only for SCO (x86) compatibility i386_SPFLAG= -D_iBCS2 sparc_SPFLAG= iBCS2FLAG = $($(MACH)_SPFLAG) # This flag is for programs which should not build a 32-bit binary sparc_64ONLY= $(POUND_SIGN) 64ONLY= $($(MACH)_64ONLY)