// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
 * Device Tree Source for the Spider CPU board
 *
 * Copyright (C) 2021 Renesas Electronics Corp.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>

#include "r8a779f0.dtsi"

/ {
	model = "Renesas Spider CPU board";
	compatible = "renesas,spider-cpu", "renesas,r8a779f0";

	aliases {
		serial0 = &hscif0;
		serial1 = &scif0;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
		stdout-path = "serial0:1843200n8";
	};

	leds {
		compatible = "gpio-leds";

		led-7 {
			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <7>;
		};

		led-8 {
			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_INDICATOR;
			function-enumerator = <8>;
		};
	};

	memory@48000000 {
		device_type = "memory";
		/* first 128MB is reserved for secure area. */
		reg = <0x0 0x48000000 0x0 0x78000000>;
	};

	memory@480000000 {
		device_type = "memory";
		reg = <0x4 0x80000000 0x0 0x80000000>;
	};

	rc21012_ufs: clk-rc21012-ufs {
		compatible = "fixed-clock";
		clock-frequency = <38400000>;
		#clock-cells = <0>;
	};

	reg_1p8v: regulator-1p8v {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-boot-on;
		regulator-always-on;
	};

	reg_3p3v: regulator-3p3v {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&extalr_clk {
	clock-frequency = <32768>;
};

&hscif0 {
	pinctrl-0 = <&hscif0_pins>;
	pinctrl-names = "default";

	uart-has-rtscts;
	status = "okay";
};

&i2c0 {
	pinctrl-0 = <&i2c0_pins>;
	pinctrl-names = "default";

	status = "okay";
	clock-frequency = <400000>;

	gpio_exp_20: gpio@20 {
		compatible = "ti,tca9554";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&i2c4 {
	pinctrl-0 = <&i2c4_pins>;
	pinctrl-names = "default";

	status = "okay";
	clock-frequency = <400000>;

	eeprom@50 {
		compatible = "rohm,br24g01", "atmel,24c01";
		label = "cpu-board";
		reg = <0x50>;
		pagesize = <8>;
	};
};

/*
 * This board also has a microSD slot which we will not support upstream
 * because we cannot directly switch voltages in software.
 */
&mmc0 {
	pinctrl-0 = <&mmc_pins>;
	pinctrl-1 = <&mmc_pins>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&reg_3p3v>;
	vqmmc-supply = <&reg_1p8v>;
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	bus-width = <8>;
	no-sd;
	no-sdio;
	non-removable;
	full-pwr-cycle-in-suspend;
	status = "okay";
};

&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	hscif0_pins: hscif0 {
		groups = "hscif0_data", "hscif0_ctrl";
		function = "hscif0";
	};

	i2c0_pins: i2c0 {
		groups = "i2c0";
		function = "i2c0";
	};

	i2c4_pins: i2c4 {
		groups = "i2c4";
		function = "i2c4";
	};

	mmc_pins: mmc {
		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
		function = "mmc";
		power-source = <1800>;
	};

	scif0_pins: scif0 {
		groups = "scif0_data", "scif0_ctrl";
		function = "scif0";
	};

	scif_clk_pins: scif_clk {
		groups = "scif_clk";
		function = "scif_clk";
	};
};

&rwdt {
	timeout-sec = <60>;
	status = "okay";
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	uart-has-rtscts;
	status = "okay";
};

&scif_clk {
	clock-frequency = <24000000>;
};

&ufs {
	status = "okay";
};

&ufs30_clk {
	compatible = "gpio-gate-clock";
	clocks = <&rc21012_ufs>;
	enable-gpios = <&gpio_exp_20 4 GPIO_ACTIVE_LOW>;
	/delete-property/ clock-frequency;
};