// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/input/input.h>
#include "rk3229.dtsi"

/ {
	model = "Rockchip RK3229 Evaluation board";
	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";

	aliases {
		mmc0 = &emmc;
	};

	memory@60000000 {
		device_type = "memory";
		reg = <0x60000000 0x40000000>;
	};

	dc_12v: regulator-dc-12v {
		compatible = "regulator-fixed";
		regulator-name = "dc_12v";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	ext_gmac: ext_gmac {
		compatible = "fixed-clock";
		clock-frequency = <125000000>;
		clock-output-names = "ext_gmac";
		#clock-cells = <0>;
	};

	vcc_host: regulator-vcc-host {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&host_vbus_drv>;
		regulator-name = "vcc_host";
		regulator-always-on;
		regulator-boot-on;
		vin-supply = <&vcc_sys>;
	};

	vcc_phy: regulator-vcc-phy {
		compatible = "regulator-fixed";
		enable-active-high;
		regulator-name = "vcc_phy";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
		regulator-boot-on;
		vin-supply = <&vccio_1v8>;
	};

	vcc_sys: regulator-vcc-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&dc_12v>;
	};

	vccio_1v8: regulator-vccio-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "vccio_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
		vin-supply = <&vcc_sys>;
	};

	vccio_3v3: regulator-vccio-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "vccio_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		vin-supply = <&vcc_sys>;
	};

	vdd_arm: regulator-vdd-arm {
		compatible = "pwm-regulator";
		pwms = <&pwm1 0 25000 1>;
		pwm-supply = <&vcc_sys>;
		regulator-name = "vdd_arm";
		regulator-min-microvolt = <950000>;
		regulator-max-microvolt = <1400000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vdd_log: regulator-vdd-log {
		compatible = "pwm-regulator";
		pwms = <&pwm2 0 25000 1>;
		pwm-supply = <&vcc_sys>;
		regulator-name = "vdd_log";
		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1300000>;
		regulator-always-on;
		regulator-boot-on;
	};

	gpio-keys {
		compatible = "gpio-keys";
		autorepeat;
		pinctrl-names = "default";
		pinctrl-0 = <&pwr_key>;

		power_key: power-key {
			label = "GPIO Key Power";
			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			debounce-interval = <100>;
			wakeup-source;
		};
	};
};

&cpu0 {
	cpu-supply = <&vdd_arm>;
};

&cpu1 {
	cpu-supply = <&vdd_arm>;
};

&cpu2 {
	cpu-supply = <&vdd_arm>;
};

&cpu3 {
	cpu-supply = <&vdd_arm>;
};

&emmc {
	cap-mmc-highspeed;
	non-removable;
	status = "okay";
};

&gmac {
	assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
	assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
	clock_in_out = "input";
	phy-supply = <&vcc_phy>;
	phy-mode = "rgmii";
	pinctrl-names = "default";
	pinctrl-0 = <&rgmii_pins>;
	snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	snps,reset-delays-us = <0 10000 1000000>;
	tx_delay = <0x30>;
	rx_delay = <0x10>;
	status = "okay";
};

&io_domains {
	status = "okay";

	vccio1-supply = <&vccio_3v3>;
	vccio2-supply = <&vccio_1v8>;
	vccio4-supply = <&vccio_3v3>;
};

&pinctrl {
	keys {
		pwr_key: pwr-key {
			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	usb {
		host_vbus_drv: host-vbus-drv {
			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pwm1 {
	status = "okay";
};

&pwm2 {
	status = "okay";
};

&tsadc {
	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
	status = "okay";
};

&uart2 {
	status = "okay";
};

&u2phy0 {
	status = "okay";

	u2phy0_otg: otg-port {
		status = "okay";
	};

	u2phy0_host: host-port {
		phy-supply = <&vcc_host>;
		status = "okay";
	};
};

&u2phy1 {
	status = "okay";

	u2phy1_otg: otg-port {
		phy-supply = <&vcc_host>;
		status = "okay";
	};

	u2phy1_host: host-port {
		phy-supply = <&vcc_host>;
		status = "okay";
	};
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "okay";
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "okay";
};

&usb_host2_ehci {
	status = "okay";
};

&usb_host2_ohci {
	status = "okay";
};

&usb_otg {
	status = "okay";
};