# SPDX-License-Identifier: GPL-2.0-only menuconfig PWM bool "Pulse-Width Modulation (PWM) Support" help Generic Pulse-Width Modulation (PWM) support. In Pulse-Width Modulation, a variation of the width of pulses in a rectangular pulse signal is used as a means to alter the average power of the signal. Applications include efficient power delivery and voltage regulation. In computer systems, PWMs are commonly used to control fans or the brightness of display backlights. This framework provides a generic interface to PWM devices within the Linux kernel. On the driver side it provides an API to register and unregister a PWM chip, an abstraction of a PWM controller, that supports one or more PWM devices. Client drivers can request PWM devices and use the generic framework to configure as well as enable and disable them. This generic framework replaces the legacy PWM framework which allows only a single driver implementing the required API. Not all legacy implementations have been ported to the framework yet. The framework provides an API that is backward compatible with the legacy framework so that existing client drivers continue to work as expected. If unsure, say no. if PWM config PWM_DEBUG bool "PWM lowlevel drivers additional checks and debug messages" depends on DEBUG_KERNEL help This option enables some additional checks to help lowlevel driver authors to get their callbacks implemented correctly. It is expected to introduce some runtime overhead and diagnostic output to the kernel log, so only enable while working on a driver. config PWM_AB8500 tristate "AB8500 PWM support" depends on AB8500_CORE && ARCH_U8500 help Generic PWM framework driver for Analog Baseband AB8500. To compile this driver as a module, choose M here: the module will be called pwm-ab8500. config PWM_APPLE tristate "Apple SoC PWM support" depends on ARCH_APPLE || COMPILE_TEST help Generic PWM framework driver for PWM controller present on Apple SoCs Say Y here if you have an ARM Apple laptop, otherwise say N To compile this driver as a module, choose M here: the module will be called pwm-apple. config PWM_ATMEL tristate "Atmel PWM support" depends on ARCH_AT91 || COMPILE_TEST depends on HAS_IOMEM && OF help Generic PWM framework driver for Atmel SoC. To compile this driver as a module, choose M here: the module will be called pwm-atmel. config PWM_ATMEL_HLCDC_PWM tristate "Atmel HLCDC PWM support" depends on MFD_ATMEL_HLCDC depends on HAVE_CLK help Generic PWM framework driver for the PWM output of the HLCDC (Atmel High-end LCD Controller). This PWM output is mainly used to control the LCD backlight. To compile this driver as a module, choose M here: the module will be called pwm-atmel-hlcdc. config PWM_ATMEL_TCB tristate "Atmel TC Block PWM support" depends on OF select REGMAP_MMIO help Generic PWM framework driver for Atmel Timer Counter Block. A Timer Counter Block provides 6 PWM devices grouped by 2. Devices in a given group must have the same period. To compile this driver as a module, choose M here: the module will be called pwm-atmel-tcb. config PWM_AXI_PWMGEN tristate "Analog Devices AXI PWM generator" depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || COMPILE_TEST select REGMAP_MMIO help This enables support for the Analog Devices AXI PWM generator. This is a configurable PWM generator with variable pulse width and period. To compile this driver as a module, choose M here: the module will be called pwm-axi-pwmgen. config PWM_BCM_IPROC tristate "iProc PWM support" depends on ARCH_BCM_IPROC || COMPILE_TEST depends on COMMON_CLK && HAS_IOMEM default ARCH_BCM_IPROC help Generic PWM framework driver for Broadcom iProc PWM block. This block is used in Broadcom iProc SoC's. To compile this driver as a module, choose M here: the module will be called pwm-bcm-iproc. config PWM_BCM_KONA tristate "Kona PWM support" depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS || COMPILE_TEST depends on HAVE_CLK && HAS_IOMEM default ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS help Generic PWM framework driver for Broadcom Kona PWM block. To compile this driver as a module, choose M here: the module will be called pwm-bcm-kona. config PWM_BCM2835 tristate "BCM2835 PWM support" depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST depends on HAS_IOMEM help PWM framework driver for BCM2835 controller (Raspberry Pi) To compile this driver as a module, choose M here: the module will be called pwm-bcm2835. config PWM_BERLIN tristate "Marvell Berlin PWM support" depends on ARCH_BERLIN || COMPILE_TEST depends on HAS_IOMEM help PWM framework driver for Marvell Berlin SoCs. To compile this driver as a module, choose M here: the module will be called pwm-berlin. config PWM_BRCMSTB tristate "Broadcom STB PWM support" depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for the Broadcom Set-top-Box SoCs (BCM7xxx). To compile this driver as a module, choose M Here: the module will be called pwm-brcmstb.c. config PWM_CLK tristate "Clock based PWM support" depends on HAVE_CLK || COMPILE_TEST help Generic PWM framework driver for outputs that can be muxed to clocks. To compile this driver as a module, choose M here: the module will be called pwm-clk. config PWM_CLPS711X tristate "CLPS711X PWM support" depends on ARCH_CLPS711X || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for Cirrus Logic CLPS711X. To compile this driver as a module, choose M here: the module will be called pwm-clps711x. config PWM_CRC tristate "Intel Crystalcove (CRC) PWM support" depends on INTEL_SOC_PMIC help Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM control. config PWM_CROS_EC tristate "ChromeOS EC PWM driver" depends on CROS_EC help PWM driver for exposing a PWM attached to the ChromeOS Embedded Controller. config PWM_DWC_CORE tristate depends on HAS_IOMEM help PWM driver for Synopsys DWC PWM Controller. To compile this driver as a module, build the dependecies as modules, this will be called pwm-dwc-core. config PWM_DWC tristate "DesignWare PWM Controller (PCI bus)" depends on HAS_IOMEM && PCI select PWM_DWC_CORE help PWM driver for Synopsys DWC PWM Controller attached to a PCI bus. To compile this driver as a module, choose M here: the module will be called pwm-dwc. config PWM_EP93XX tristate "Cirrus Logic EP93xx PWM support" depends on ARCH_EP93XX || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for Cirrus Logic EP93xx. To compile this driver as a module, choose M here: the module will be called pwm-ep93xx. config PWM_FSL_FTM tristate "Freescale FlexTimer Module (FTM) PWM support" depends on HAS_IOMEM depends on OF select REGMAP_MMIO help Generic FTM PWM framework driver for Freescale VF610 and Layerscape LS-1 SoCs. To compile this driver as a module, choose M here: the module will be called pwm-fsl-ftm. config PWM_GPIO tristate "GPIO PWM support" depends on GPIOLIB depends on HIGH_RES_TIMERS help Generic PWM framework driver for software PWM toggling a GPIO pin from kernel high-resolution timers. To compile this driver as a module, choose M here: the module will be called pwm-gpio. config PWM_HIBVT tristate "HiSilicon BVT PWM support" depends on ARCH_HISI || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for HiSilicon BVT SoCs. To compile this driver as a module, choose M here: the module will be called pwm-hibvt. config PWM_IMG tristate "Imagination Technologies PWM driver" depends on HAS_IOMEM depends on MFD_SYSCON depends on COMMON_CLK depends on MIPS || COMPILE_TEST help Generic PWM framework driver for Imagination Technologies PWM block which supports 4 channels. To compile this driver as a module, choose M here: the module will be called pwm-img config PWM_IMX1 tristate "i.MX1 PWM support" depends on ARCH_MXC || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for i.MX1 and i.MX21 To compile this driver as a module, choose M here: the module will be called pwm-imx1. config PWM_IMX27 tristate "i.MX27 PWM support" depends on ARCH_MXC || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for i.MX27 and later i.MX SoCs. To compile this driver as a module, choose M here: the module will be called pwm-imx27. config PWM_IMX_TPM tristate "i.MX TPM PWM support" depends on ARCH_MXC || COMPILE_TEST depends on HAVE_CLK && HAS_IOMEM help Generic PWM framework driver for i.MX7ULP TPM module, TPM's full name is Low Power Timer/Pulse Width Modulation Module. To compile this driver as a module, choose M here: the module will be called pwm-imx-tpm. config PWM_INTEL_LGM tristate "Intel LGM PWM support" depends on HAS_IOMEM depends on (OF && X86) || COMPILE_TEST select REGMAP_MMIO help Generic PWM fan controller driver for LGM SoC. To compile this driver as a module, choose M here: the module will be called pwm-intel-lgm. config PWM_IQS620A tristate "Azoteq IQS620A PWM support" depends on MFD_IQS62X || COMPILE_TEST help Generic PWM framework driver for the Azoteq IQS620A multi-function sensor. To compile this driver as a module, choose M here: the module will be called pwm-iqs620a. config PWM_JZ4740 tristate "Ingenic JZ47xx PWM support" depends on MACH_INGENIC || COMPILE_TEST depends on COMMON_CLK && OF select MFD_SYSCON help Generic PWM framework driver for Ingenic JZ47xx based machines. To compile this driver as a module, choose M here: the module will be called pwm-jz4740. config PWM_KEEMBAY tristate "Intel Keem Bay PWM driver" depends on ARCH_KEEMBAY || COMPILE_TEST depends on COMMON_CLK && HAS_IOMEM help The platform driver for Intel Keem Bay PWM controller. To compile this driver as a module, choose M here: the module will be called pwm-keembay. config PWM_LP3943 tristate "TI/National Semiconductor LP3943 PWM support" depends on MFD_LP3943 help Generic PWM framework driver for LP3943 which supports two PWM channels. To compile this driver as a module, choose M here: the module will be called pwm-lp3943. config PWM_LPC18XX_SCT tristate "LPC18xx/43xx PWM/SCT support" depends on ARCH_LPC18XX || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for NXP LPC18xx PWM/SCT which supports 16 channels. A maximum of 15 channels can be requested simultaneously and must have the same period. To compile this driver as a module, choose M here: the module will be called pwm-lpc18xx-sct. config PWM_LPC32XX tristate "LPC32XX PWM support" depends on ARCH_LPC32XX || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two PWM controllers. To compile this driver as a module, choose M here: the module will be called pwm-lpc32xx. config PWM_LPSS depends on HAS_IOMEM tristate config PWM_LPSS_PCI tristate "Intel LPSS PWM PCI driver" depends on X86 || COMPILE_TEST depends on HAS_IOMEM && PCI select PWM_LPSS help The PCI driver for Intel Low Power Subsystem PWM controller. To compile this driver as a module, choose M here: the module will be called pwm-lpss-pci. config PWM_LPSS_PLATFORM tristate "Intel LPSS PWM platform driver" depends on (X86 && ACPI) || COMPILE_TEST depends on HAS_IOMEM select PWM_LPSS help The platform driver for Intel Low Power Subsystem PWM controller. To compile this driver as a module, choose M here: the module will be called pwm-lpss-platform. config PWM_MESON tristate "Amlogic Meson PWM driver" depends on ARCH_MESON || COMPILE_TEST depends on COMMON_CLK && HAS_IOMEM help The platform driver for Amlogic Meson PWM controller. To compile this driver as a module, choose M here: the module will be called pwm-meson. config PWM_MTK_DISP tristate "MediaTek display PWM driver" depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for MediaTek disp-pwm device. The PWM is used to control the backlight brightness for display. To compile this driver as a module, choose M here: the module will be called pwm-mtk-disp. config PWM_MEDIATEK tristate "MediaTek PWM support" depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for Mediatek ARM SoC. To compile this driver as a module, choose M here: the module will be called pwm-mediatek. config PWM_MICROCHIP_CORE tristate "Microchip corePWM PWM support" depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST depends on HAS_IOMEM && OF help PWM driver for Microchip FPGA soft IP core. To compile this driver as a module, choose M here: the module will be called pwm-microchip-core. config PWM_MXS tristate "Freescale MXS PWM support" depends on ARCH_MXS || COMPILE_TEST depends on HAS_IOMEM && OF select STMP_DEVICE help Generic PWM framework driver for Freescale MXS. To compile this driver as a module, choose M here: the module will be called pwm-mxs. config PWM_NTXEC tristate "Netronix embedded controller PWM support" depends on MFD_NTXEC help Say yes here if you want to support the PWM output of the embedded controller found in certain e-book readers designed by the original design manufacturer Netronix. config PWM_OMAP_DMTIMER tristate "OMAP Dual-Mode Timer PWM support" depends on OF depends on OMAP_DM_TIMER || COMPILE_TEST help Generic PWM framework driver for OMAP Dual-Mode Timer PWM output To compile this driver as a module, choose M here: the module will be called pwm-omap-dmtimer config PWM_PCA9685 tristate "NXP PCA9685 PWM driver" depends on I2C select REGMAP_I2C help Generic PWM framework driver for NXP PCA9685 LED controller. To compile this driver as a module, choose M here: the module will be called pwm-pca9685. config PWM_PXA tristate "PXA PWM support" depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for PXA. To compile this driver as a module, choose M here: the module will be called pwm-pxa. config PWM_RASPBERRYPI_POE tristate "Raspberry Pi Firwmware PoE Hat PWM support" # Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only # happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE. depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) help Enable Raspberry Pi firmware controller PWM bus used to control the official RPI PoE hat config PWM_RCAR tristate "Renesas R-Car PWM support" depends on ARCH_RENESAS || COMPILE_TEST depends on HAS_IOMEM help This driver exposes the PWM Timer controller found in Renesas R-Car chips through the PWM API. To compile this driver as a module, choose M here: the module will be called pwm-rcar. config PWM_RENESAS_TPU tristate "Renesas TPU PWM support" depends on ARCH_RENESAS || COMPILE_TEST depends on HAS_IOMEM help This driver exposes the Timer Pulse Unit (TPU) PWM controller found in Renesas chips through the PWM API. To compile this driver as a module, choose M here: the module will be called pwm-renesas-tpu. config PWM_ROCKCHIP tristate "Rockchip PWM support" depends on ARCH_ROCKCHIP || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for the PWM controller found on Rockchip SoCs. config PWM_RZ_MTU3 tristate "Renesas RZ/G2L MTU3a PWM Timer support" depends on RZ_MTU3 depends on HAS_IOMEM help This driver exposes the MTU3a PWM Timer controller found in Renesas RZ/G2L like chips through the PWM API. To compile this driver as a module, choose M here: the module will be called pwm-rz-mtu3. config PWM_SAMSUNG tristate "Samsung PWM support" depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for Samsung S3C24xx, S3C64xx, S5Pv210 and Exynos SoCs. Choose Y here only if you build for such Samsung SoC. To compile this driver as a module, choose M here: the module will be called pwm-samsung. config PWM_SIFIVE tristate "SiFive PWM support" depends on OF depends on COMMON_CLK && HAS_IOMEM depends on RISCV || COMPILE_TEST help Generic PWM framework driver for SiFive SoCs. To compile this driver as a module, choose M here: the module will be called pwm-sifive. config PWM_SL28CPLD tristate "Kontron sl28cpld PWM support" depends on MFD_SL28CPLD || COMPILE_TEST help Generic PWM framework driver for board management controller found on the Kontron sl28 CPLD. To compile this driver as a module, choose M here: the module will be called pwm-sl28cpld. config PWM_SPEAR tristate "STMicroelectronics SPEAr PWM support" depends on PLAT_SPEAR || COMPILE_TEST depends on HAS_IOMEM && OF help Generic PWM framework driver for the PWM controller on ST SPEAr SoCs. To compile this driver as a module, choose M here: the module will be called pwm-spear. config PWM_SPRD tristate "Spreadtrum PWM support" depends on ARCH_SPRD || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for the PWM controller on Spreadtrum SoCs. To compile this driver as a module, choose M here: the module will be called pwm-sprd. config PWM_STI tristate "STiH4xx PWM support" depends on ARCH_STI || COMPILE_TEST depends on HAS_IOMEM && OF help Generic PWM framework driver for STiH4xx SoCs. To compile this driver as a module, choose M here: the module will be called pwm-sti. config PWM_STM32 tristate "STMicroelectronics STM32 PWM" depends on MFD_STM32_TIMERS || COMPILE_TEST help Generic PWM framework driver for STM32 SoCs. To compile this driver as a module, choose M here: the module will be called pwm-stm32. config PWM_STM32_LP tristate "STMicroelectronics STM32 PWM LP" depends on MFD_STM32_LPTIMER || COMPILE_TEST help Generic PWM framework driver for STMicroelectronics STM32 SoCs with Low-Power Timer (LPTIM). To compile this driver as a module, choose M here: the module will be called pwm-stm32-lp. config PWM_STMPE bool "STMPE expander PWM export" depends on MFD_STMPE help This enables support for the PWMs found in the STMPE I/O expanders. config PWM_SUN4I tristate "Allwinner PWM support" depends on ARCH_SUNXI || COMPILE_TEST depends on HAS_IOMEM && COMMON_CLK help Generic PWM framework driver for Allwinner SoCs. To compile this driver as a module, choose M here: the module will be called pwm-sun4i. config PWM_SUNPLUS tristate "Sunplus PWM support" depends on ARCH_SUNPLUS || COMPILE_TEST depends on HAS_IOMEM && OF help Generic PWM framework driver for the PWM controller on Sunplus SoCs. To compile this driver as a module, choose M here: the module will be called pwm-sunplus. config PWM_TEGRA tristate "NVIDIA Tegra PWM support" depends on ARCH_TEGRA || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for the PWFM controller found on NVIDIA Tegra SoCs. To compile this driver as a module, choose M here: the module will be called pwm-tegra. config PWM_TIECAP tristate "ECAP PWM support" depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST depends on HAS_IOMEM help PWM driver support for the ECAP APWM controller found on TI SOCs To compile this driver as a module, choose M here: the module will be called pwm-tiecap. config PWM_TIEHRPWM tristate "EHRPWM PWM support" depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST depends on HAS_IOMEM help PWM driver support for the EHRPWM controller found on TI SOCs To compile this driver as a module, choose M here: the module will be called pwm-tiehrpwm. config PWM_TWL tristate "TWL4030/6030 PWM support" depends on TWL4030_CORE help Generic PWM framework driver for TWL4030/6030. To compile this driver as a module, choose M here: the module will be called pwm-twl. config PWM_TWL_LED tristate "TWL4030/6030 PWM support for LED drivers" depends on TWL4030_CORE help Generic PWM framework driver for TWL4030/6030 LED terminals. To compile this driver as a module, choose M here: the module will be called pwm-twl-led. config PWM_VISCONTI tristate "Toshiba Visconti PWM support" depends on ARCH_VISCONTI || COMPILE_TEST help PWM Subsystem driver support for Toshiba Visconti SoCs. To compile this driver as a module, choose M here: the module will be called pwm-visconti. config PWM_VT8500 tristate "vt8500 PWM support" depends on ARCH_VT8500 || COMPILE_TEST depends on HAS_IOMEM help Generic PWM framework driver for vt8500. To compile this driver as a module, choose M here: the module will be called pwm-vt8500. config PWM_XILINX tristate "Xilinx AXI Timer PWM support" depends on OF_ADDRESS depends on COMMON_CLK select REGMAP_MMIO help PWM driver for Xilinx LogiCORE IP AXI timers. This timer is typically a soft core which may be present in Xilinx FPGAs. This device may also be present in Microblaze soft processors. If you don't have this IP in your design, choose N. To compile this driver as a module, choose M here: the module will be called pwm-xilinx. endif