# SPDX-License-Identifier: GPL-2.0-only # # Intel network device configuration # config NET_VENDOR_INTEL bool "Intel devices" default y help If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all the questions about Intel cards. If you say Y, you will be asked for your specific card in the following questions. if NET_VENDOR_INTEL config E100 tristate "Intel(R) PRO/100+ support" depends on PCI select MII help This driver supports Intel(R) PRO/100 family of adapters. To verify that your adapter is supported, find the board ID number on the adapter. Look for a label that has a barcode and a number in the format 123456-001 (six digits hyphen three digits). Use the above information and the Adapter & Driver ID Guide that can be located at: to identify the adapter. More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called e100. config E1000 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" depends on PCI help This driver supports Intel(R) PRO/1000 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called e1000. config E1000E tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" depends on PCI && (!SPARC32 || BROKEN) select CRC32 imply PTP_1588_CLOCK help This driver supports the PCI-Express Intel(R) PRO/1000 gigabit ethernet family of adapters. For PCI or PCI-X e1000 adapters, use the regular e1000 driver For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called e1000e. config E1000E_HWTS bool "Support HW cross-timestamp on PCH devices" default y depends on E1000E && X86 help Say Y to enable hardware supported cross-timestamping on PCH devices. The cross-timestamp is available through the PTP clock driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). config IGB tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" depends on PCI imply PTP_1588_CLOCK select I2C select I2C_ALGOBIT help This driver supports Intel(R) 82575/82576 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called igb. config IGB_HWMON bool "Intel(R) PCI-Express Gigabit adapters HWMON support" default y depends on IGB && HWMON && !(IGB=y && HWMON=m) help Say Y if you want to expose thermal sensor data on Intel devices. Some of our devices contain thermal sensors, both external and internal. This data is available via the hwmon sysfs interface and exposes the onboard sensors. config IGB_DCA bool "Direct Cache Access (DCA) Support" default y depends on IGB && DCA && !(IGB=y && DCA=m) help Say Y here if you want to use Direct Cache Access (DCA) in the driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. config IGBVF tristate "Intel(R) 82576 Virtual Function Ethernet support" depends on PCI help This driver supports Intel(R) 82576 virtual functions. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called igbvf. config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI help This driver supports Intel(R) PRO/10GbE family of adapters for PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver instead. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called ixgb. config IXGBE tristate "Intel(R) 10GbE PCI Express adapters support" depends on PCI select MDIO select PHYLIB imply PTP_1588_CLOCK help This driver supports Intel(R) 10GbE PCI Express family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called ixgbe. config IXGBE_HWMON bool "Intel(R) 10GbE PCI Express adapters HWMON support" default y depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) help Say Y if you want to expose the thermal sensor data on some of our cards, via a hwmon sysfs interface. config IXGBE_DCA bool "Direct Cache Access (DCA) Support" default y depends on IXGBE && DCA && !(IXGBE=y && DCA=m) help Say Y here if you want to use Direct Cache Access (DCA) in the driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. config IXGBE_DCB bool "Data Center Bridging (DCB) Support" default n depends on IXGBE && DCB help Say Y here if you want to use Data Center Bridging (DCB) in the driver. If unsure, say N. config IXGBE_IPSEC bool "IPSec XFRM cryptography-offload acceleration" depends on IXGBE depends on XFRM_OFFLOAD default y select XFRM_ALGO help Enable support for IPSec offload in ixgbe.ko config IXGBEVF tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" depends on PCI_MSI help This driver supports Intel(R) PCI Express virtual functions for the Intel(R) ixgbe driver. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called ixgbevf. MSI-X interrupt support is required for this driver to work correctly. config IXGBEVF_IPSEC bool "IPSec XFRM cryptography-offload acceleration" depends on IXGBEVF depends on XFRM_OFFLOAD default y select XFRM_ALGO help Enable support for IPSec offload in ixgbevf.ko config I40E tristate "Intel(R) Ethernet Controller XL710 Family support" imply PTP_1588_CLOCK depends on PCI select AUXILIARY_BUS help This driver supports Intel(R) Ethernet Controller XL710 Family of devices. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called i40e. config I40E_DCB bool "Data Center Bridging (DCB) Support" default n depends on I40E && DCB help Say Y here if you want to use Data Center Bridging (DCB) in the driver. If unsure, say N. # this is here to allow seamless migration from I40EVF --> IAVF name # so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF config IAVF tristate config I40EVF tristate "Intel(R) Ethernet Adaptive Virtual Function support" select IAVF depends on PCI_MSI help This driver supports virtual functions for Intel XL710, X710, X722, XXV710, and all devices advertising support for Intel Ethernet Adaptive Virtual Function devices. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: This driver was formerly named i40evf. More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called iavf. MSI-X interrupt support is required for this driver to work correctly. config ICE tristate "Intel(R) Ethernet Connection E800 Series Support" default n depends on PCI_MSI select AUXILIARY_BUS select DIMLIB select NET_DEVLINK select PLDMFW help This driver supports Intel(R) Ethernet Connection E800 Series of devices. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called ice. config FM10K tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" default n depends on PCI_MSI imply PTP_1588_CLOCK help This driver supports Intel(R) FM10000 Ethernet Switch Host Interface. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: More specific information on configuring the driver is in . To compile this driver as a module, choose M here. The module will be called fm10k. MSI-X interrupt support is required config IGC tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" default n depends on PCI help This driver supports Intel(R) Ethernet Controller I225-LM/I225-V family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide that can be located at: To compile this driver as a module, choose M here. The module will be called igc. endif # NET_VENDOR_INTEL