# SPDX-License-Identifier: GPL-2.0-only # # AMD network device configuration # config NET_VENDOR_AMD bool "AMD devices" default y depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ ISA || EISA || PCMCIA || ARM64 help If you have a network (Ethernet) chipset belonging to this class, say Y. Note that the answer to this question does not directly affect the kernel: saying N will just cause the configurator to skip all the questions regarding AMD chipsets. If you say Y, you will be asked for your specific chipset/driver in the following questions. if NET_VENDOR_AMD config A2065 tristate "A2065 support" depends on ZORRO select CRC32 help If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, say N. To compile this driver as a module, choose M here: the module will be called a2065. config AMD8111_ETH tristate "AMD 8111 (new PCI LANCE) support" depends on PCI select CRC32 select MII help If you have an AMD 8111-based PCI LANCE ethernet card, answer Y here. To compile this driver as a module, choose M here. The module will be called amd8111e. config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" depends on ISA && ISA_DMA_API && !ARM && !PPC32 select NETDEV_LEGACY_INIT help If you have a network (Ethernet) card of this type, say Y here. Some LinkSys cards are of this type. To compile this driver as a module, choose M here: the module will be called lance. This is recommended. config PCNET32 tristate "AMD PCnet32 PCI support" depends on PCI select CRC32 select MII help If you have a PCnet32 or PCnetPCI based network (Ethernet) card, answer Y here. To compile this driver as a module, choose M here. The module will be called pcnet32. config ARIADNE tristate "Ariadne support" depends on ZORRO help If you have a Village Tronic Ariadne Ethernet adapter, say Y. Otherwise, say N. To compile this driver as a module, choose M here: the module will be called ariadne. config ATARILANCE tristate "Atari LANCE support" depends on ATARI help Say Y to include support for several Atari Ethernet adapters based on the AMD LANCE chipset: RieblCard (with or without battery), or PAMCard VME (also the version by Rhotron, with different addresses). config DECLANCE tristate "DEC LANCE ethernet controller support" depends on MACH_DECSTATION select CRC32 help This driver is for the series of Ethernet controllers produced by DEC (now Compaq) based on the AMD LANCE chipset, including the DEPCA series. (This chipset is better known via the NE2100 cards.) config HPLANCE tristate "HP on-board LANCE support" depends on DIO select CRC32 help If you want to use the builtin "LANCE" Ethernet controller on an HP300 machine, say Y here. config MIPS_AU1X00_ENET tristate "MIPS AU1000 Ethernet support" depends on MIPS_ALCHEMY select PHYLIB select CRC32 help If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. config MVME147_NET tristate "MVME147 (LANCE) Ethernet support" depends on MVME147 select CRC32 help Support for the on-board Ethernet interface on the Motorola MVME147 single-board computer. Say Y here to include the driver for this chip in your kernel. To compile this driver as a module, choose M here. config PCMCIA_NMCLAN tristate "New Media PCMCIA support" depends on PCMCIA help Say Y here if you intend to attach a New Media Ethernet or LiveWire PCMCIA (PC-card) Ethernet card to your computer. To compile this driver as a module, choose M here: the module will be called nmclan_cs. If unsure, say N. config SUN3LANCE tristate "Sun3/Sun3x on-board LANCE support" depends on (SUN3 || SUN3X) help Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) featured an AMD LANCE 10Mbit Ethernet controller on board; say Y here to compile in the Linux driver for this and enable Ethernet. General Linux information on the Sun 3 and 3x series (now discontinued) is at . If you're not building a kernel for a Sun 3, say N. config SUNLANCE tristate "Sun LANCE support" depends on SBUS select CRC32 help This driver supports the "le" interface present on all 32-bit Sparc systems, on some older Ultra systems and as an Sbus option. These cards are based on the AMD LANCE chipset, which is better known via the NE2100 cards. To compile this driver as a module, choose M here: the module will be called sunlance. config AMD_XGBE tristate "AMD 10GbE Ethernet driver" depends on (OF_ADDRESS || ACPI || PCI) && HAS_IOMEM depends on X86 || ARM64 || COMPILE_TEST depends on PTP_1588_CLOCK_OPTIONAL select BITREVERSE select CRC32 select PHYLIB select AMD_XGBE_HAVE_ECC if X86 help This driver supports the AMD 10GbE Ethernet device found on an AMD SoC. To compile this driver as a module, choose M here: the module will be called amd-xgbe. config AMD_XGBE_DCB bool "Data Center Bridging (DCB) support" default n depends on AMD_XGBE && DCB help Say Y here to enable Data Center Bridging (DCB) support in the driver. If unsure, say N. config AMD_XGBE_HAVE_ECC bool default n config PDS_CORE tristate "AMD/Pensando Data Systems Core Device Support" depends on 64BIT && PCI help This enables the support for the AMD/Pensando Core device family of adapters. More specific information on this driver can be found in . To compile this driver as a module, choose M here. The module will be called pds_core. endif # NET_VENDOR_AMD