// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2009 Felix Fietkau * Copyright (C) 2011-2012 Gabor Juhos * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved. * Copyright (c) 2016 John Crispin */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "qca8k.h" #include "qca8k_leds.h" static void qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) { regaddr >>= 1; *r1 = regaddr & 0x1e; regaddr >>= 5; *r2 = regaddr & 0x7; regaddr >>= 3; *page = regaddr & 0x3ff; } static int qca8k_mii_write_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) { int ret; u16 lo; lo = val & 0xffff; ret = bus->write(bus, phy_id, regnum, lo); if (ret < 0) dev_err_ratelimited(&bus->dev, "failed to write qca8k 32bit lo register\n"); return ret; } static int qca8k_mii_write_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) { int ret; u16 hi; hi = (u16)(val >> 16); ret = bus->write(bus, phy_id, regnum, hi); if (ret < 0) dev_err_ratelimited(&bus->dev, "failed to write qca8k 32bit hi register\n"); return ret; } static int qca8k_mii_read_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) { int ret; ret = bus->read(bus, phy_id, regnum); if (ret < 0) goto err; *val = ret & 0xffff; return 0; err: dev_err_ratelimited(&bus->dev, "failed to read qca8k 32bit lo register\n"); *val = 0; return ret; } static int qca8k_mii_read_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) { int ret; ret = bus->read(bus, phy_id, regnum); if (ret < 0) goto err; *val = ret << 16; return 0; err: dev_err_ratelimited(&bus->dev, "failed to read qca8k 32bit hi register\n"); *val = 0; return ret; } static int qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) { u32 hi, lo; int ret; *val = 0; ret = qca8k_mii_read_lo(bus, phy_id, regnum, &lo); if (ret < 0) goto err; ret = qca8k_mii_read_hi(bus, phy_id, regnum + 1, &hi); if (ret < 0) goto err; *val = lo | hi; err: return ret; } static void qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) { if (qca8k_mii_write_lo(bus, phy_id, regnum, val) < 0) return; qca8k_mii_write_hi(bus, phy_id, regnum + 1, val); } static int qca8k_set_page(struct qca8k_priv *priv, u16 page) { u16 *cached_page = &priv->mdio_cache.page; struct mii_bus *bus = priv->bus; int ret; if (page == *cached_page) return 0; ret = bus->write(bus, 0x18, 0, page); if (ret < 0) { dev_err_ratelimited(&bus->dev, "failed to set qca8k page\n"); return ret; } *cached_page = page; usleep_range(1000, 2000); return 0; } static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb) { struct qca8k_mgmt_eth_data *mgmt_eth_data; struct qca8k_priv *priv = ds->priv; struct qca_mgmt_ethhdr *mgmt_ethhdr; u32 command; u8 len, cmd; int i; mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb_mac_header(skb); mgmt_eth_data = &priv->mgmt_eth_data; command = get_unaligned_le32(&mgmt_ethhdr->command); cmd = FIELD_GET(QCA_HDR_MGMT_CMD, command); len = FIELD_GET(QCA_HDR_MGMT_LENGTH, command); /* Special case for len of 15 as this is the max value for len and needs to * be increased before converting it from word to dword. */ if (len == 15) len++; /* We can ignore odd value, we always round up them in the alloc function. */ len *= sizeof(u16); /* Make sure the seq match the requested packet */ if (get_unaligned_le32(&mgmt_ethhdr->seq) == mgmt_eth_data->seq) mgmt_eth_data->ack = true; if (cmd == MDIO_READ) { u32 *val = mgmt_eth_data->data; *val = get_unaligned_le32(&mgmt_ethhdr->mdio_data); /* Get the rest of the 12 byte of data. * The read/write function will extract the requested data. */ if (len > QCA_HDR_MGMT_DATA1_LEN) { __le32 *data2 = (__le32 *)skb->data; int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN, len - QCA_HDR_MGMT_DATA1_LEN); val++; for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) { *val = get_unaligned_le32(data2); val++; data2++; } } } complete(&mgmt_eth_data->rw_done); } static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val, int priority, unsigned int len) { struct qca_mgmt_ethhdr *mgmt_ethhdr; unsigned int real_len; struct sk_buff *skb; __le32 *data2; u32 command; u16 hdr; int i; skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN); if (!skb) return NULL; /* Hdr mgmt length value is in step of word size. * As an example to process 4 byte of data the correct length to set is 2. * To process 8 byte 4, 12 byte 6, 16 byte 8... * * Odd values will always return the next size on the ack packet. * (length of 3 (6 byte) will always return 8 bytes of data) * * This means that a value of 15 (0xf) actually means reading/writing 32 bytes * of data. * * To correctly calculate the length we devide the requested len by word and * round up. * On the ack function we can skip the odd check as we already handle the * case here. */ real_len = DIV_ROUND_UP(len, sizeof(u16)); /* We check if the result len is odd and we round up another time to * the next size. (length of 3 will be increased to 4 as switch will always * return 8 bytes) */ if (real_len % sizeof(u16) != 0) real_len++; /* Max reg value is 0xf(15) but switch will always return the next size (32 byte) */ if (real_len == 16) real_len--; skb_reset_mac_header(skb); skb_set_network_header(skb, skb->len); mgmt_ethhdr = skb_push(skb, QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN); hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION); hdr |= FIELD_PREP(QCA_HDR_XMIT_PRIORITY, priority); hdr |= QCA_HDR_XMIT_FROM_CPU; hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0)); hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG); command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg); command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, real_len); command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd); command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE, QCA_HDR_MGMT_CHECK_CODE_VAL); put_unaligned_le32(command, &mgmt_ethhdr->command); if (cmd == MDIO_WRITE) put_unaligned_le32(*val, &mgmt_ethhdr->mdio_data); mgmt_ethhdr->hdr = htons(hdr); data2 = skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN); if (cmd == MDIO_WRITE && len > QCA_HDR_MGMT_DATA1_LEN) { int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN, len - QCA_HDR_MGMT_DATA1_LEN); val++; for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) { put_unaligned_le32(*val, data2); data2++; val++; } } return skb; } static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num) { struct qca_mgmt_ethhdr *mgmt_ethhdr; u32 seq; seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num); mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb->data; put_unaligned_le32(seq, &mgmt_ethhdr->seq); } static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) { struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; struct sk_buff *skb; bool ack; int ret; skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL, QCA8K_ETHERNET_MDIO_PRIORITY, len); if (!skb) return -ENOMEM; mutex_lock(&mgmt_eth_data->mutex); /* Check if the mgmt_conduit if is operational */ if (!priv->mgmt_conduit) { kfree_skb(skb); mutex_unlock(&mgmt_eth_data->mutex); return -EINVAL; } skb->dev = priv->mgmt_conduit; reinit_completion(&mgmt_eth_data->rw_done); /* Increment seq_num and set it in the mdio pkt */ mgmt_eth_data->seq++; qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); mgmt_eth_data->ack = false; dev_queue_xmit(skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); *val = mgmt_eth_data->data[0]; if (len > QCA_HDR_MGMT_DATA1_LEN) memcpy(val + 1, mgmt_eth_data->data + 1, len - QCA_HDR_MGMT_DATA1_LEN); ack = mgmt_eth_data->ack; mutex_unlock(&mgmt_eth_data->mutex); if (ret <= 0) return -ETIMEDOUT; if (!ack) return -EINVAL; return 0; } static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) { struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; struct sk_buff *skb; bool ack; int ret; skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val, QCA8K_ETHERNET_MDIO_PRIORITY, len); if (!skb) return -ENOMEM; mutex_lock(&mgmt_eth_data->mutex); /* Check if the mgmt_conduit if is operational */ if (!priv->mgmt_conduit) { kfree_skb(skb); mutex_unlock(&mgmt_eth_data->mutex); return -EINVAL; } skb->dev = priv->mgmt_conduit; reinit_completion(&mgmt_eth_data->rw_done); /* Increment seq_num and set it in the mdio pkt */ mgmt_eth_data->seq++; qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); mgmt_eth_data->ack = false; dev_queue_xmit(skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); ack = mgmt_eth_data->ack; mutex_unlock(&mgmt_eth_data->mutex); if (ret <= 0) return -ETIMEDOUT; if (!ack) return -EINVAL; return 0; } static int qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) { u32 val = 0; int ret; ret = qca8k_read_eth(priv, reg, &val, sizeof(val)); if (ret) return ret; val &= ~mask; val |= write_val; return qca8k_write_eth(priv, reg, &val, sizeof(val)); } static int qca8k_read_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t *val) { struct mii_bus *bus = priv->bus; u16 r1, r2, page; int ret; qca8k_split_addr(reg, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ret = qca8k_set_page(priv, page); if (ret < 0) goto exit; ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val); exit: mutex_unlock(&bus->mdio_lock); return ret; } static int qca8k_write_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t val) { struct mii_bus *bus = priv->bus; u16 r1, r2, page; int ret; qca8k_split_addr(reg, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ret = qca8k_set_page(priv, page); if (ret < 0) goto exit; qca8k_mii_write32(bus, 0x10 | r2, r1, val); exit: mutex_unlock(&bus->mdio_lock); return ret; } static int qca8k_regmap_update_bits_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t mask, uint32_t write_val) { struct mii_bus *bus = priv->bus; u16 r1, r2, page; u32 val; int ret; qca8k_split_addr(reg, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ret = qca8k_set_page(priv, page); if (ret < 0) goto exit; ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val); if (ret < 0) goto exit; val &= ~mask; val |= write_val; qca8k_mii_write32(bus, 0x10 | r2, r1, val); exit: mutex_unlock(&bus->mdio_lock); return ret; } static int qca8k_bulk_read(void *ctx, const void *reg_buf, size_t reg_len, void *val_buf, size_t val_len) { int i, count = val_len / sizeof(u32), ret; struct qca8k_priv *priv = ctx; u32 reg = *(u16 *)reg_buf; if (priv->mgmt_conduit && !qca8k_read_eth(priv, reg, val_buf, val_len)) return 0; /* loop count times and increment reg of 4 */ for (i = 0; i < count; i++, reg += sizeof(u32)) { ret = qca8k_read_mii(priv, reg, val_buf + i); if (ret < 0) return ret; } return 0; } static int qca8k_bulk_gather_write(void *ctx, const void *reg_buf, size_t reg_len, const void *val_buf, size_t val_len) { int i, count = val_len / sizeof(u32), ret; struct qca8k_priv *priv = ctx; u32 reg = *(u16 *)reg_buf; u32 *val = (u32 *)val_buf; if (priv->mgmt_conduit && !qca8k_write_eth(priv, reg, val, val_len)) return 0; /* loop count times, increment reg of 4 and increment val ptr to * the next value */ for (i = 0; i < count; i++, reg += sizeof(u32), val++) { ret = qca8k_write_mii(priv, reg, *val); if (ret < 0) return ret; } return 0; } static int qca8k_bulk_write(void *ctx, const void *data, size_t bytes) { return qca8k_bulk_gather_write(ctx, data, sizeof(u16), data + sizeof(u16), bytes - sizeof(u16)); } static int qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val) { struct qca8k_priv *priv = ctx; if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val)) return 0; return qca8k_regmap_update_bits_mii(priv, reg, mask, write_val); } static const struct regmap_config qca8k_regmap_config = { .reg_bits = 16, .val_bits = 32, .reg_stride = 4, .max_register = 0x16ac, /* end MIB - Port6 range */ .read = qca8k_bulk_read, .write = qca8k_bulk_write, .reg_update_bits = qca8k_regmap_update_bits, .rd_table = &qca8k_readable_table, .disable_locking = true, /* Locking is handled by qca8k read/write */ .cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */ .max_raw_read = 32, /* mgmt eth can read up to 8 registers at time */ /* ATU regs suffer from a bug where some data are not correctly * written. Disable bulk write to correctly write ATU entry. */ .use_single_write = true, }; static int qca8k_phy_eth_busy_wait(struct qca8k_mgmt_eth_data *mgmt_eth_data, struct sk_buff *read_skb, u32 *val) { struct sk_buff *skb = skb_copy(read_skb, GFP_KERNEL); bool ack; int ret; if (!skb) return -ENOMEM; reinit_completion(&mgmt_eth_data->rw_done); /* Increment seq_num and set it in the copy pkt */ mgmt_eth_data->seq++; qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); mgmt_eth_data->ack = false; dev_queue_xmit(skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); ack = mgmt_eth_data->ack; if (ret <= 0) return -ETIMEDOUT; if (!ack) return -EINVAL; *val = mgmt_eth_data->data[0]; return 0; } static int qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, int regnum, u16 data) { struct sk_buff *write_skb, *clear_skb, *read_skb; struct qca8k_mgmt_eth_data *mgmt_eth_data; u32 write_val, clear_val = 0, val; struct net_device *mgmt_conduit; int ret, ret1; bool ack; if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) return -EINVAL; mgmt_eth_data = &priv->mgmt_eth_data; write_val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | QCA8K_MDIO_MASTER_REG_ADDR(regnum); if (read) { write_val |= QCA8K_MDIO_MASTER_READ; } else { write_val |= QCA8K_MDIO_MASTER_WRITE; write_val |= QCA8K_MDIO_MASTER_DATA(data); } /* Prealloc all the needed skb before the lock */ write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &write_val, QCA8K_ETHERNET_PHY_PRIORITY, sizeof(write_val)); if (!write_skb) return -ENOMEM; clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &clear_val, QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); if (!clear_skb) { ret = -ENOMEM; goto err_clear_skb; } read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, &clear_val, QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); if (!read_skb) { ret = -ENOMEM; goto err_read_skb; } /* It seems that accessing the switch's internal PHYs via management * packets still uses the MDIO bus within the switch internally, and * these accesses can conflict with external MDIO accesses to other * devices on the MDIO bus. * We therefore need to lock the MDIO bus onto which the switch is * connected. */ mutex_lock(&priv->bus->mdio_lock); /* Actually start the request: * 1. Send mdio master packet * 2. Busy Wait for mdio master command * 3. Get the data if we are reading * 4. Reset the mdio master (even with error) */ mutex_lock(&mgmt_eth_data->mutex); /* Check if mgmt_conduit is operational */ mgmt_conduit = priv->mgmt_conduit; if (!mgmt_conduit) { mutex_unlock(&mgmt_eth_data->mutex); mutex_unlock(&priv->bus->mdio_lock); ret = -EINVAL; goto err_mgmt_conduit; } read_skb->dev = mgmt_conduit; clear_skb->dev = mgmt_conduit; write_skb->dev = mgmt_conduit; reinit_completion(&mgmt_eth_data->rw_done); /* Increment seq_num and set it in the write pkt */ mgmt_eth_data->seq++; qca8k_mdio_header_fill_seq_num(write_skb, mgmt_eth_data->seq); mgmt_eth_data->ack = false; dev_queue_xmit(write_skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); ack = mgmt_eth_data->ack; if (ret <= 0) { ret = -ETIMEDOUT; kfree_skb(read_skb); goto exit; } if (!ack) { ret = -EINVAL; kfree_skb(read_skb); goto exit; } ret = read_poll_timeout(qca8k_phy_eth_busy_wait, ret1, !(val & QCA8K_MDIO_MASTER_BUSY), 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, mgmt_eth_data, read_skb, &val); if (ret < 0 && ret1 < 0) { ret = ret1; goto exit; } if (read) { reinit_completion(&mgmt_eth_data->rw_done); /* Increment seq_num and set it in the read pkt */ mgmt_eth_data->seq++; qca8k_mdio_header_fill_seq_num(read_skb, mgmt_eth_data->seq); mgmt_eth_data->ack = false; dev_queue_xmit(read_skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); ack = mgmt_eth_data->ack; if (ret <= 0) { ret = -ETIMEDOUT; goto exit; } if (!ack) { ret = -EINVAL; goto exit; } ret = mgmt_eth_data->data[0] & QCA8K_MDIO_MASTER_DATA_MASK; } else { kfree_skb(read_skb); } exit: reinit_completion(&mgmt_eth_data->rw_done); /* Increment seq_num and set it in the clear pkt */ mgmt_eth_data->seq++; qca8k_mdio_header_fill_seq_num(clear_skb, mgmt_eth_data->seq); mgmt_eth_data->ack = false; dev_queue_xmit(clear_skb); wait_for_completion_timeout(&mgmt_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); mutex_unlock(&mgmt_eth_data->mutex); mutex_unlock(&priv->bus->mdio_lock); return ret; /* Error handling before lock */ err_mgmt_conduit: kfree_skb(read_skb); err_read_skb: kfree_skb(clear_skb); err_clear_skb: kfree_skb(write_skb); return ret; } static int qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) { u16 r1, r2, page; u32 val; int ret, ret1; qca8k_split_addr(reg, &r1, &r2, &page); ret = read_poll_timeout(qca8k_mii_read_hi, ret1, !(val & mask), 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, bus, 0x10 | r2, r1 + 1, &val); /* Check if qca8k_read has failed for a different reason * before returnting -ETIMEDOUT */ if (ret < 0 && ret1 < 0) return ret1; return ret; } static int qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data) { struct mii_bus *bus = priv->bus; u16 r1, r2, page; u32 val; int ret; if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) return -EINVAL; val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | QCA8K_MDIO_MASTER_REG_ADDR(regnum) | QCA8K_MDIO_MASTER_DATA(data); qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ret = qca8k_set_page(priv, page); if (ret) goto exit; qca8k_mii_write32(bus, 0x10 | r2, r1, val); ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, QCA8K_MDIO_MASTER_BUSY); exit: /* even if the busy_wait timeouts try to clear the MASTER_EN */ qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0); mutex_unlock(&bus->mdio_lock); return ret; } static int qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum) { struct mii_bus *bus = priv->bus; u16 r1, r2, page; u32 val; int ret; if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) return -EINVAL; val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) | QCA8K_MDIO_MASTER_REG_ADDR(regnum); qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ret = qca8k_set_page(priv, page); if (ret) goto exit; qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, val); ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, QCA8K_MDIO_MASTER_BUSY); if (ret) goto exit; ret = qca8k_mii_read_lo(bus, 0x10 | r2, r1, &val); exit: /* even if the busy_wait timeouts try to clear the MASTER_EN */ qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0); mutex_unlock(&bus->mdio_lock); if (ret >= 0) ret = val & QCA8K_MDIO_MASTER_DATA_MASK; return ret; } static int qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data) { struct qca8k_priv *priv = slave_bus->priv; int ret; /* Use mdio Ethernet when available, fallback to legacy one on error */ ret = qca8k_phy_eth_command(priv, false, phy, regnum, data); if (!ret) return 0; return qca8k_mdio_write(priv, phy, regnum, data); } static int qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) { struct qca8k_priv *priv = slave_bus->priv; int ret; /* Use mdio Ethernet when available, fallback to legacy one on error */ ret = qca8k_phy_eth_command(priv, true, phy, regnum, 0); if (ret >= 0) return ret; ret = qca8k_mdio_read(priv, phy, regnum); if (ret < 0) return 0xffff; return ret; } static int qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data) { port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; return qca8k_internal_mdio_write(slave_bus, port, regnum, data); } static int qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum) { port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; return qca8k_internal_mdio_read(slave_bus, port, regnum); } static int qca8k_mdio_register(struct qca8k_priv *priv) { struct dsa_switch *ds = priv->ds; struct device *dev = ds->dev; struct device_node *mdio; struct mii_bus *bus; int ret = 0; mdio = of_get_child_by_name(dev->of_node, "mdio"); if (mdio && !of_device_is_available(mdio)) goto out_put_node; bus = devm_mdiobus_alloc(dev); if (!bus) { ret = -ENOMEM; goto out_put_node; } priv->internal_mdio_bus = bus; bus->priv = (void *)priv; snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d", ds->dst->index, ds->index); bus->parent = dev; if (mdio) { /* Check if the device tree declares the port:phy mapping */ bus->name = "qca8k user mii"; bus->read = qca8k_internal_mdio_read; bus->write = qca8k_internal_mdio_write; } else { /* If a mapping can't be found, the legacy mapping is used, * using qca8k_port_to_phy() */ ds->user_mii_bus = bus; bus->phy_mask = ~ds->phys_mii_mask; bus->name = "qca8k-legacy user mii"; bus->read = qca8k_legacy_mdio_read; bus->write = qca8k_legacy_mdio_write; } ret = devm_of_mdiobus_register(dev, bus, mdio); out_put_node: of_node_put(mdio); return ret; } static int qca8k_setup_mdio_bus(struct qca8k_priv *priv) { u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg; struct device_node *ports, *port; phy_interface_t mode; int ret; ports = of_get_child_by_name(priv->dev->of_node, "ports"); if (!ports) ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports"); if (!ports) return -EINVAL; for_each_available_child_of_node(ports, port) { ret = of_property_read_u32(port, "reg", ®); if (ret) { of_node_put(port); of_node_put(ports); return ret; } if (!dsa_is_user_port(priv->ds, reg)) continue; of_get_phy_mode(port, &mode); if (of_property_read_bool(port, "phy-handle") && mode != PHY_INTERFACE_MODE_INTERNAL) external_mdio_mask |= BIT(reg); else internal_mdio_mask |= BIT(reg); } of_node_put(ports); if (!external_mdio_mask && !internal_mdio_mask) { dev_err(priv->dev, "no PHYs are defined.\n"); return -EINVAL; } /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through * the MDIO_MASTER register also _disconnects_ the external MDC * passthrough to the internal PHYs. It's not possible to use both * configurations at the same time! * * Because this came up during the review process: * If the external mdio-bus driver is capable magically disabling * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's * accessors for the time being, it would be possible to pull this * off. */ if (!!external_mdio_mask && !!internal_mdio_mask) { dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n"); return -EINVAL; } if (external_mdio_mask) { /* Make sure to disable the internal mdio bus in cases * a dt-overlay and driver reload changed the configuration */ return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL, QCA8K_MDIO_MASTER_EN); } return qca8k_mdio_register(priv); } static int qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv) { u32 mask = 0; int ret = 0; /* SoC specific settings for ipq8064. * If more device require this consider adding * a dedicated binding. */ if (of_machine_is_compatible("qcom,ipq8064")) mask |= QCA8K_MAC_PWR_RGMII0_1_8V; /* SoC specific settings for ipq8065 */ if (of_machine_is_compatible("qcom,ipq8065")) mask |= QCA8K_MAC_PWR_RGMII1_1_8V; if (mask) { ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL, QCA8K_MAC_PWR_RGMII0_1_8V | QCA8K_MAC_PWR_RGMII1_1_8V, mask); } return ret; } static int qca8k_find_cpu_port(struct dsa_switch *ds) { struct qca8k_priv *priv = ds->priv; /* Find the connected cpu port. Valid port are 0 or 6 */ if (dsa_is_cpu_port(ds, 0)) return 0; dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6"); if (dsa_is_cpu_port(ds, 6)) return 6; return -EINVAL; } static int qca8k_setup_of_pws_reg(struct qca8k_priv *priv) { const struct qca8k_match_data *data = priv->info; struct device_node *node = priv->dev->of_node; u32 val = 0; int ret; /* QCA8327 require to set to the correct mode. * His bigger brother QCA8328 have the 172 pin layout. * Should be applied by default but we set this just to make sure. */ if (priv->switch_id == QCA8K_ID_QCA8327) { /* Set the correct package of 148 pin for QCA8327 */ if (data->reduced_package) val |= QCA8327_PWS_PACKAGE148_EN; ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN, val); if (ret) return ret; } if (of_property_read_bool(node, "qca,ignore-power-on-sel")) val |= QCA8K_PWS_POWER_ON_SEL; if (of_property_read_bool(node, "qca,led-open-drain")) { if (!(val & QCA8K_PWS_POWER_ON_SEL)) { dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set."); return -EINVAL; } val |= QCA8K_PWS_LED_OPEN_EN_CSR; } return qca8k_rmw(priv, QCA8K_REG_PWS, QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL, val); } static int qca8k_parse_port_config(struct qca8k_priv *priv) { int port, cpu_port_index = -1, ret; struct device_node *port_dn; phy_interface_t mode; struct dsa_port *dp; u32 delay; /* We have 2 CPU port. Check them */ for (port = 0; port < QCA8K_NUM_PORTS; port++) { /* Skip every other port */ if (port != 0 && port != 6) continue; dp = dsa_to_port(priv->ds, port); port_dn = dp->dn; cpu_port_index++; if (!of_device_is_available(port_dn)) continue; ret = of_get_phy_mode(port_dn, &mode); if (ret) continue; switch (mode) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_TXID: case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_SGMII: delay = 0; if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) /* Switch regs accept value in ns, convert ps to ns */ delay = delay / 1000; else if (mode == PHY_INTERFACE_MODE_RGMII_ID || mode == PHY_INTERFACE_MODE_RGMII_TXID) delay = 1; if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) { dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); delay = 3; } priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay; delay = 0; if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay)) /* Switch regs accept value in ns, convert ps to ns */ delay = delay / 1000; else if (mode == PHY_INTERFACE_MODE_RGMII_ID || mode == PHY_INTERFACE_MODE_RGMII_RXID) delay = 2; if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) { dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); delay = 3; } priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay; /* Skip sgmii parsing for rgmii* mode */ if (mode == PHY_INTERFACE_MODE_RGMII || mode == PHY_INTERFACE_MODE_RGMII_ID || mode == PHY_INTERFACE_MODE_RGMII_TXID || mode == PHY_INTERFACE_MODE_RGMII_RXID) break; if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) priv->ports_config.sgmii_tx_clk_falling_edge = true; if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) priv->ports_config.sgmii_rx_clk_falling_edge = true; if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) { priv->ports_config.sgmii_enable_pll = true; if (priv->switch_id == QCA8K_ID_QCA8327) { dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); priv->ports_config.sgmii_enable_pll = false; } if (priv->switch_revision < 2) dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more."); } break; default: continue; } } return 0; } static void qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index, u32 reg) { u32 delay, val = 0; int ret; /* Delay can be declared in 3 different way. * Mode to rgmii and internal-delay standard binding defined * rgmii-id or rgmii-tx/rx phy mode set. * The parse logic set a delay different than 0 only when one * of the 3 different way is used. In all other case delay is * not enabled. With ID or TX/RXID delay is enabled and set * to the default and recommended value. */ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) { delay = priv->ports_config.rgmii_tx_delay[cpu_port_index]; val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; } if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) { delay = priv->ports_config.rgmii_rx_delay[cpu_port_index]; val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; } /* Set RGMII delay based on the selected values */ ret = qca8k_rmw(priv, reg, QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK | QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK | QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | QCA8K_PORT_PAD_RGMII_RX_DELAY_EN, val); if (ret) dev_err(priv->dev, "Failed to set internal delay for CPU port%d", cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6); } static struct phylink_pcs * qca8k_phylink_mac_select_pcs(struct phylink_config *config, phy_interface_t interface) { struct dsa_port *dp = dsa_phylink_to_port(config); struct qca8k_priv *priv = dp->ds->priv; struct phylink_pcs *pcs = NULL; int port = dp->index; switch (interface) { case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_1000BASEX: switch (port) { case 0: pcs = &priv->pcs_port_0.pcs; break; case 6: pcs = &priv->pcs_port_6.pcs; break; } break; default: break; } return pcs; } static void qca8k_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { struct dsa_port *dp = dsa_phylink_to_port(config); struct dsa_switch *ds = dp->ds; struct qca8k_priv *priv; int port = dp->index; int cpu_port_index; u32 reg; priv = ds->priv; switch (port) { case 0: /* 1st CPU port */ if (state->interface != PHY_INTERFACE_MODE_RGMII && state->interface != PHY_INTERFACE_MODE_RGMII_ID && state->interface != PHY_INTERFACE_MODE_RGMII_TXID && state->interface != PHY_INTERFACE_MODE_RGMII_RXID && state->interface != PHY_INTERFACE_MODE_SGMII) return; reg = QCA8K_REG_PORT0_PAD_CTRL; cpu_port_index = QCA8K_CPU_PORT0; break; case 1: case 2: case 3: case 4: case 5: /* Internal PHY, nothing to do */ return; case 6: /* 2nd CPU port / external PHY */ if (state->interface != PHY_INTERFACE_MODE_RGMII && state->interface != PHY_INTERFACE_MODE_RGMII_ID && state->interface != PHY_INTERFACE_MODE_RGMII_TXID && state->interface != PHY_INTERFACE_MODE_RGMII_RXID && state->interface != PHY_INTERFACE_MODE_SGMII && state->interface != PHY_INTERFACE_MODE_1000BASEX) return; reg = QCA8K_REG_PORT6_PAD_CTRL; cpu_port_index = QCA8K_CPU_PORT6; break; default: dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); return; } if (port != 6 && phylink_autoneg_inband(mode)) { dev_err(ds->dev, "%s: in-band negotiation unsupported\n", __func__); return; } switch (state->interface) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_TXID: case PHY_INTERFACE_MODE_RGMII_RXID: qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); /* Configure rgmii delay */ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); /* QCA8337 requires to set rgmii rx delay for all ports. * This is enabled through PORT5_PAD_CTRL for all ports, * rather than individual port registers. */ if (priv->switch_id == QCA8K_ID_QCA8337) qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); break; case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_1000BASEX: /* Enable SGMII on the port */ qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); break; default: dev_err(ds->dev, "xMII mode %s not supported for port %d\n", phy_modes(state->interface), port); return; } } static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { switch (port) { case 0: /* 1st CPU port */ phy_interface_set_rgmii(config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); break; case 1: case 2: case 3: case 4: case 5: /* Internal PHY */ __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); break; case 6: /* 2nd CPU port / external PHY */ phy_interface_set_rgmii(config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_1000BASEX, config->supported_interfaces); break; } config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD; } static void qca8k_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { struct dsa_port *dp = dsa_phylink_to_port(config); struct qca8k_priv *priv = dp->ds->priv; qca8k_port_set_status(priv, dp->index, 0); } static void qca8k_phylink_mac_link_up(struct phylink_config *config, struct phy_device *phydev, unsigned int mode, phy_interface_t interface, int speed, int duplex, bool tx_pause, bool rx_pause) { struct dsa_port *dp = dsa_phylink_to_port(config); struct qca8k_priv *priv = dp->ds->priv; int port = dp->index; u32 reg; if (phylink_autoneg_inband(mode)) { reg = QCA8K_PORT_STATUS_LINK_AUTO; } else { switch (speed) { case SPEED_10: reg = QCA8K_PORT_STATUS_SPEED_10; break; case SPEED_100: reg = QCA8K_PORT_STATUS_SPEED_100; break; case SPEED_1000: reg = QCA8K_PORT_STATUS_SPEED_1000; break; default: reg = QCA8K_PORT_STATUS_LINK_AUTO; break; } if (duplex == DUPLEX_FULL) reg |= QCA8K_PORT_STATUS_DUPLEX; if (rx_pause || dsa_port_is_cpu(dp)) reg |= QCA8K_PORT_STATUS_RXFLOW; if (tx_pause || dsa_port_is_cpu(dp)) reg |= QCA8K_PORT_STATUS_TXFLOW; } reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC; qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg); } static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs) { return container_of(pcs, struct qca8k_pcs, pcs); } static void qca8k_pcs_get_state(struct phylink_pcs *pcs, struct phylink_link_state *state) { struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; int port = pcs_to_qca8k_pcs(pcs)->port; u32 reg; int ret; ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); if (ret < 0) { state->link = false; return; } state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); state->an_complete = state->link; state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; switch (reg & QCA8K_PORT_STATUS_SPEED) { case QCA8K_PORT_STATUS_SPEED_10: state->speed = SPEED_10; break; case QCA8K_PORT_STATUS_SPEED_100: state->speed = SPEED_100; break; case QCA8K_PORT_STATUS_SPEED_1000: state->speed = SPEED_1000; break; default: state->speed = SPEED_UNKNOWN; break; } if (reg & QCA8K_PORT_STATUS_RXFLOW) state->pause |= MLO_PAUSE_RX; if (reg & QCA8K_PORT_STATUS_TXFLOW) state->pause |= MLO_PAUSE_TX; } static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, phy_interface_t interface, const unsigned long *advertising, bool permit_pause_to_mac) { struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; int cpu_port_index, ret, port; u32 reg, val; port = pcs_to_qca8k_pcs(pcs)->port; switch (port) { case 0: reg = QCA8K_REG_PORT0_PAD_CTRL; cpu_port_index = QCA8K_CPU_PORT0; break; case 6: reg = QCA8K_REG_PORT6_PAD_CTRL; cpu_port_index = QCA8K_CPU_PORT6; break; default: WARN_ON(1); return -EINVAL; } /* Enable/disable SerDes auto-negotiation as necessary */ val = neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED ? 0 : QCA8K_PWS_SERDES_AEN_DIS; ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8K_PWS_SERDES_AEN_DIS, val); if (ret) return ret; /* Configure the SGMII parameters */ ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); if (ret) return ret; val |= QCA8K_SGMII_EN_SD; if (priv->ports_config.sgmii_enable_pll) val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | QCA8K_SGMII_EN_TX; if (dsa_is_cpu_port(priv->ds, port)) { /* CPU port, we're talking to the CPU MAC, be a PHY */ val &= ~QCA8K_SGMII_MODE_CTRL_MASK; val |= QCA8K_SGMII_MODE_CTRL_PHY; } else if (interface == PHY_INTERFACE_MODE_SGMII) { val &= ~QCA8K_SGMII_MODE_CTRL_MASK; val |= QCA8K_SGMII_MODE_CTRL_MAC; } else if (interface == PHY_INTERFACE_MODE_1000BASEX) { val &= ~QCA8K_SGMII_MODE_CTRL_MASK; val |= QCA8K_SGMII_MODE_CTRL_BASEX; } qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); /* From original code is reported port instability as SGMII also * require delay set. Apply advised values here or take them from DT. */ if (interface == PHY_INTERFACE_MODE_SGMII) qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and * falling edge is set writing in the PORT0 PAD reg */ if (priv->switch_id == QCA8K_ID_QCA8327 || priv->switch_id == QCA8K_ID_QCA8337) reg = QCA8K_REG_PORT0_PAD_CTRL; val = 0; /* SGMII Clock phase configuration */ if (priv->ports_config.sgmii_rx_clk_falling_edge) val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; if (priv->ports_config.sgmii_tx_clk_falling_edge) val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; if (val) ret = qca8k_rmw(priv, reg, QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, val); return 0; } static void qca8k_pcs_an_restart(struct phylink_pcs *pcs) { } static const struct phylink_pcs_ops qca8k_pcs_ops = { .pcs_get_state = qca8k_pcs_get_state, .pcs_config = qca8k_pcs_config, .pcs_an_restart = qca8k_pcs_an_restart, }; static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs, int port) { qpcs->pcs.ops = &qca8k_pcs_ops; qpcs->pcs.neg_mode = true; /* We don't have interrupts for link changes, so we need to poll */ qpcs->pcs.poll = true; qpcs->priv = priv; qpcs->port = port; } static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb) { struct qca8k_mib_eth_data *mib_eth_data; struct qca8k_priv *priv = ds->priv; const struct qca8k_mib_desc *mib; struct mib_ethhdr *mib_ethhdr; __le32 *data2; u8 port; int i; mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb); mib_eth_data = &priv->mib_eth_data; /* The switch autocast every port. Ignore other packet and * parse only the requested one. */ port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr)); if (port != mib_eth_data->req_port) goto exit; data2 = (__le32 *)skb->data; for (i = 0; i < priv->info->mib_count; i++) { mib = &ar8327_mib[i]; /* First 3 mib are present in the skb head */ if (i < 3) { mib_eth_data->data[i] = get_unaligned_le32(mib_ethhdr->data + i); continue; } /* Some mib are 64 bit wide */ if (mib->size == 2) mib_eth_data->data[i] = get_unaligned_le64((__le64 *)data2); else mib_eth_data->data[i] = get_unaligned_le32(data2); data2 += mib->size; } exit: /* Complete on receiving all the mib packet */ if (refcount_dec_and_test(&mib_eth_data->port_parsed)) complete(&mib_eth_data->rw_done); } static int qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data) { struct dsa_port *dp = dsa_to_port(ds, port); struct qca8k_mib_eth_data *mib_eth_data; struct qca8k_priv *priv = ds->priv; int ret; mib_eth_data = &priv->mib_eth_data; mutex_lock(&mib_eth_data->mutex); reinit_completion(&mib_eth_data->rw_done); mib_eth_data->req_port = dp->index; mib_eth_data->data = data; refcount_set(&mib_eth_data->port_parsed, QCA8K_NUM_PORTS); mutex_lock(&priv->reg_mutex); /* Send mib autocast request */ ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FUNC | QCA8K_MIB_BUSY, FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) | QCA8K_MIB_BUSY); mutex_unlock(&priv->reg_mutex); if (ret) goto exit; ret = wait_for_completion_timeout(&mib_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); exit: mutex_unlock(&mib_eth_data->mutex); return ret; } static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port) { struct qca8k_priv *priv = ds->priv; /* Communicate to the phy internal driver the switch revision. * Based on the switch revision different values needs to be * set to the dbg and mmd reg on the phy. * The first 2 bit are used to communicate the switch revision * to the phy driver. */ if (port > 0 && port < 6) return priv->switch_revision; return 0; } static enum dsa_tag_protocol qca8k_get_tag_protocol(struct dsa_switch *ds, int port, enum dsa_tag_protocol mp) { return DSA_TAG_PROTO_QCA; } static void qca8k_conduit_change(struct dsa_switch *ds, const struct net_device *conduit, bool operational) { struct dsa_port *dp = conduit->dsa_ptr; struct qca8k_priv *priv = ds->priv; /* Ethernet MIB/MDIO is only supported for CPU port 0 */ if (dp->index != 0) return; mutex_lock(&priv->mgmt_eth_data.mutex); mutex_lock(&priv->mib_eth_data.mutex); priv->mgmt_conduit = operational ? (struct net_device *)conduit : NULL; mutex_unlock(&priv->mib_eth_data.mutex); mutex_unlock(&priv->mgmt_eth_data.mutex); } static int qca8k_connect_tag_protocol(struct dsa_switch *ds, enum dsa_tag_protocol proto) { struct qca_tagger_data *tagger_data; switch (proto) { case DSA_TAG_PROTO_QCA: tagger_data = ds->tagger_data; tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler; tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler; break; default: return -EOPNOTSUPP; } return 0; } static void qca8k_setup_hol_fixup(struct qca8k_priv *priv, int port) { u32 mask; switch (port) { /* The 2 CPU port and port 5 requires some different * priority than any other ports. */ case 0: case 5: case 6: mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) | QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) | QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) | QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) | QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e); break; default: mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) | QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) | QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19); } regmap_write(priv->regmap, QCA8K_REG_PORT_HOL_CTRL0(port), mask); mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) | QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | QCA8K_PORT_HOL_CTRL1_WRED_EN; regmap_update_bits(priv->regmap, QCA8K_REG_PORT_HOL_CTRL1(port), QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK | QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | QCA8K_PORT_HOL_CTRL1_WRED_EN, mask); } static int qca8k_setup(struct dsa_switch *ds) { struct qca8k_priv *priv = ds->priv; struct dsa_port *dp; int cpu_port, ret; u32 mask; cpu_port = qca8k_find_cpu_port(ds); if (cpu_port < 0) { dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6"); return cpu_port; } /* Parse CPU port config to be later used in phy_link mac_config */ ret = qca8k_parse_port_config(priv); if (ret) return ret; ret = qca8k_setup_mdio_bus(priv); if (ret) return ret; ret = qca8k_setup_of_pws_reg(priv); if (ret) return ret; ret = qca8k_setup_mac_pwr_sel(priv); if (ret) return ret; ret = qca8k_setup_led_ctrl(priv); if (ret) return ret; qca8k_setup_pcs(priv, &priv->pcs_port_0, 0); qca8k_setup_pcs(priv, &priv->pcs_port_6, 6); /* Make sure MAC06 is disabled */ ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); if (ret) { dev_err(priv->dev, "failed disabling MAC06 exchange"); return ret; } /* Enable CPU Port */ ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); if (ret) { dev_err(priv->dev, "failed enabling CPU port"); return ret; } /* Enable MIB counters */ ret = qca8k_mib_init(priv); if (ret) dev_warn(priv->dev, "mib init failed"); /* Initial setup of all ports */ dsa_switch_for_each_port(dp, ds) { /* Disable forwarding by default on all ports */ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(dp->index), QCA8K_PORT_LOOKUP_MEMBER, 0); if (ret) return ret; } /* Disable MAC by default on all user ports */ dsa_switch_for_each_user_port(dp, ds) qca8k_port_set_status(priv, dp->index, 0); /* Enable QCA header mode on all cpu ports */ dsa_switch_for_each_cpu_port(dp, ds) { ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(dp->index), FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); if (ret) { dev_err(priv->dev, "failed enabling QCA header mode on port %d", dp->index); return ret; } } /* Forward all unknown frames to CPU port for Linux processing * Notice that in multi-cpu config only one port should be set * for igmp, unknown, multicast and broadcast packet */ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) | FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) | FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) | FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port))); if (ret) return ret; /* CPU port gets connected to all user ports of the switch */ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); if (ret) return ret; /* Setup connection between CPU port & user ports * Individual user ports get connected to CPU port only */ dsa_switch_for_each_user_port(dp, ds) { u8 port = dp->index; ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port)); if (ret) return ret; ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port), QCA8K_PORT_LOOKUP_LEARN); if (ret) return ret; /* For port based vlans to work we need to set the * default egress vid */ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port), QCA8K_EGREES_VLAN_PORT_MASK(port), QCA8K_EGREES_VLAN_PORT(port, QCA8K_PORT_VID_DEF)); if (ret) return ret; ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port), QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); if (ret) return ret; } /* The port 5 of the qca8337 have some problem in flood condition. The * original legacy driver had some specific buffer and priority settings * for the different port suggested by the QCA switch team. Add this * missing settings to improve switch stability under load condition. * This problem is limited to qca8337 and other qca8k switch are not affected. */ if (priv->switch_id == QCA8K_ID_QCA8337) dsa_switch_for_each_available_port(dp, ds) qca8k_setup_hol_fixup(priv, dp->index); /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ if (priv->switch_id == QCA8K_ID_QCA8327) { mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496); qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH, QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK | QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, mask); } /* Setup our port MTUs to match power on defaults */ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); if (ret) dev_warn(priv->dev, "failed setting MTU settings"); /* Flush the FDB table */ qca8k_fdb_flush(priv); /* Set min a max ageing value supported */ ds->ageing_time_min = 7000; ds->ageing_time_max = 458745000; /* Set max number of LAGs supported */ ds->num_lag_ids = QCA8K_NUM_LAGS; return 0; } static const struct phylink_mac_ops qca8k_phylink_mac_ops = { .mac_select_pcs = qca8k_phylink_mac_select_pcs, .mac_config = qca8k_phylink_mac_config, .mac_link_down = qca8k_phylink_mac_link_down, .mac_link_up = qca8k_phylink_mac_link_up, }; static const struct dsa_switch_ops qca8k_switch_ops = { .get_tag_protocol = qca8k_get_tag_protocol, .setup = qca8k_setup, .get_strings = qca8k_get_strings, .get_ethtool_stats = qca8k_get_ethtool_stats, .get_sset_count = qca8k_get_sset_count, .set_ageing_time = qca8k_set_ageing_time, .get_mac_eee = qca8k_get_mac_eee, .set_mac_eee = qca8k_set_mac_eee, .port_enable = qca8k_port_enable, .port_disable = qca8k_port_disable, .port_change_mtu = qca8k_port_change_mtu, .port_max_mtu = qca8k_port_max_mtu, .port_stp_state_set = qca8k_port_stp_state_set, .port_pre_bridge_flags = qca8k_port_pre_bridge_flags, .port_bridge_flags = qca8k_port_bridge_flags, .port_bridge_join = qca8k_port_bridge_join, .port_bridge_leave = qca8k_port_bridge_leave, .port_fast_age = qca8k_port_fast_age, .port_fdb_add = qca8k_port_fdb_add, .port_fdb_del = qca8k_port_fdb_del, .port_fdb_dump = qca8k_port_fdb_dump, .port_mdb_add = qca8k_port_mdb_add, .port_mdb_del = qca8k_port_mdb_del, .port_mirror_add = qca8k_port_mirror_add, .port_mirror_del = qca8k_port_mirror_del, .port_vlan_filtering = qca8k_port_vlan_filtering, .port_vlan_add = qca8k_port_vlan_add, .port_vlan_del = qca8k_port_vlan_del, .phylink_get_caps = qca8k_phylink_get_caps, .get_phy_flags = qca8k_get_phy_flags, .port_lag_join = qca8k_port_lag_join, .port_lag_leave = qca8k_port_lag_leave, .conduit_state_change = qca8k_conduit_change, .connect_tag_protocol = qca8k_connect_tag_protocol, }; static int qca8k_sw_probe(struct mdio_device *mdiodev) { struct qca8k_priv *priv; int ret; /* allocate the private data struct so that we can probe the switches * ID register */ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->bus = mdiodev->bus; priv->dev = &mdiodev->dev; priv->info = of_device_get_match_data(priv->dev); priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(priv->reset_gpio)) return PTR_ERR(priv->reset_gpio); if (priv->reset_gpio) { /* The active low duration must be greater than 10 ms * and checkpatch.pl wants 20 ms. */ msleep(20); gpiod_set_value_cansleep(priv->reset_gpio, 0); } /* Start by setting up the register mapping */ priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv, &qca8k_regmap_config); if (IS_ERR(priv->regmap)) { dev_err(priv->dev, "regmap initialization failed"); return PTR_ERR(priv->regmap); } priv->mdio_cache.page = 0xffff; /* Check the detected switch id */ ret = qca8k_read_switch_id(priv); if (ret) return ret; priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); if (!priv->ds) return -ENOMEM; mutex_init(&priv->mgmt_eth_data.mutex); init_completion(&priv->mgmt_eth_data.rw_done); mutex_init(&priv->mib_eth_data.mutex); init_completion(&priv->mib_eth_data.rw_done); priv->ds->dev = &mdiodev->dev; priv->ds->num_ports = QCA8K_NUM_PORTS; priv->ds->priv = priv; priv->ds->ops = &qca8k_switch_ops; priv->ds->phylink_mac_ops = &qca8k_phylink_mac_ops; mutex_init(&priv->reg_mutex); dev_set_drvdata(&mdiodev->dev, priv); return dsa_register_switch(priv->ds); } static void qca8k_sw_remove(struct mdio_device *mdiodev) { struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); int i; if (!priv) return; for (i = 0; i < QCA8K_NUM_PORTS; i++) qca8k_port_set_status(priv, i, 0); dsa_unregister_switch(priv->ds); } static void qca8k_sw_shutdown(struct mdio_device *mdiodev) { struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; dsa_switch_shutdown(priv->ds); dev_set_drvdata(&mdiodev->dev, NULL); } #ifdef CONFIG_PM_SLEEP static void qca8k_set_pm(struct qca8k_priv *priv, int enable) { int port; for (port = 0; port < QCA8K_NUM_PORTS; port++) { /* Do not enable on resume if the port was * disabled before. */ if (!(priv->port_enabled_map & BIT(port))) continue; qca8k_port_set_status(priv, port, enable); } } static int qca8k_suspend(struct device *dev) { struct qca8k_priv *priv = dev_get_drvdata(dev); qca8k_set_pm(priv, 0); return dsa_switch_suspend(priv->ds); } static int qca8k_resume(struct device *dev) { struct qca8k_priv *priv = dev_get_drvdata(dev); qca8k_set_pm(priv, 1); return dsa_switch_resume(priv->ds); } #endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(qca8k_pm_ops, qca8k_suspend, qca8k_resume); static const struct qca8k_info_ops qca8xxx_ops = { .autocast_mib = qca8k_get_ethtool_stats_eth, }; static const struct qca8k_match_data qca8327 = { .id = QCA8K_ID_QCA8327, .reduced_package = true, .mib_count = QCA8K_QCA832X_MIB_COUNT, .ops = &qca8xxx_ops, }; static const struct qca8k_match_data qca8328 = { .id = QCA8K_ID_QCA8327, .mib_count = QCA8K_QCA832X_MIB_COUNT, .ops = &qca8xxx_ops, }; static const struct qca8k_match_data qca833x = { .id = QCA8K_ID_QCA8337, .mib_count = QCA8K_QCA833X_MIB_COUNT, .ops = &qca8xxx_ops, }; static const struct of_device_id qca8k_of_match[] = { { .compatible = "qca,qca8327", .data = &qca8327 }, { .compatible = "qca,qca8328", .data = &qca8328 }, { .compatible = "qca,qca8334", .data = &qca833x }, { .compatible = "qca,qca8337", .data = &qca833x }, { /* sentinel */ }, }; static struct mdio_driver qca8kmdio_driver = { .probe = qca8k_sw_probe, .remove = qca8k_sw_remove, .shutdown = qca8k_sw_shutdown, .mdiodrv.driver = { .name = "qca8k", .of_match_table = qca8k_of_match, .pm = &qca8k_pm_ops, }, }; mdio_module_driver(qca8kmdio_driver); MODULE_AUTHOR("Mathieu Olivari, John Crispin "); MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:qca8k");