// SPDX-License-Identifier: GPL-2.0 /* * V4L2 Support for the IMX283 * * Diagonal 15.86 mm (Type 1) CMOS Image Sensor with Square Pixel for Color * Cameras. * * Copyright (C) 2024 Ideas on Board Oy. * * Based on Sony IMX283 driver prepared by Will Whang * * Based on Sony imx477 camera driver * Copyright (C) 2019-2020 Raspberry Pi (Trading) Ltd */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Chip ID */ #define IMX283_REG_CHIP_ID CCI_REG8(0x3000) #define IMX283_CHIP_ID 0x0b // Default power on state #define IMX283_REG_STANDBY CCI_REG8(0x3000) #define IMX283_ACTIVE 0 #define IMX283_STANDBY BIT(0) #define IMX283_STBLOGIC BIT(1) #define IMX283_STBMIPI BIT(2) #define IMX283_STBDV BIT(3) #define IMX283_SLEEP BIT(4) #define IMX283_REG_CLAMP CCI_REG8(0x3001) #define IMX283_CLPSQRST BIT(4) #define IMX283_REG_PLSTMG08 CCI_REG8(0x3003) #define IMX283_PLSTMG08_VAL 0x77 #define IMX283_REG_MDSEL1 CCI_REG8(0x3004) #define IMX283_REG_MDSEL2 CCI_REG8(0x3005) #define IMX283_REG_MDSEL3 CCI_REG8(0x3006) #define IMX283_MDSEL3_VCROP_EN BIT(5) #define IMX283_REG_MDSEL4 CCI_REG8(0x3007) #define IMX283_MDSEL4_VCROP_EN (BIT(4) | BIT(6)) #define IMX283_REG_SVR CCI_REG16_LE(0x3009) #define IMX283_REG_HTRIMMING CCI_REG8(0x300b) #define IMX283_MDVREV BIT(0) /* VFLIP */ #define IMX283_HTRIMMING_EN BIT(4) #define IMX283_REG_VWINPOS CCI_REG16_LE(0x300f) #define IMX283_REG_VWIDCUT CCI_REG16_LE(0x3011) #define IMX283_REG_MDSEL7 CCI_REG16_LE(0x3013) /* CSI Clock Configuration */ #define IMX283_REG_TCLKPOST CCI_REG8(0x3018) #define IMX283_REG_THSPREPARE CCI_REG8(0x301a) #define IMX283_REG_THSZERO CCI_REG8(0x301c) #define IMX283_REG_THSTRAIL CCI_REG8(0x301e) #define IMX283_REG_TCLKTRAIL CCI_REG8(0x3020) #define IMX283_REG_TCLKPREPARE CCI_REG8(0x3022) #define IMX283_REG_TCLKZERO CCI_REG16_LE(0x3024) #define IMX283_REG_TLPX CCI_REG8(0x3026) #define IMX283_REG_THSEXIT CCI_REG8(0x3028) #define IMX283_REG_TCLKPRE CCI_REG8(0x302a) #define IMX283_REG_SYSMODE CCI_REG8(0x3104) #define IMX283_REG_Y_OUT_SIZE CCI_REG16_LE(0x302f) #define IMX283_REG_WRITE_VSIZE CCI_REG16_LE(0x3031) #define IMX283_REG_OB_SIZE_V CCI_REG8(0x3033) /* HMAX internal HBLANK */ #define IMX283_REG_HMAX CCI_REG16_LE(0x3036) #define IMX283_HMAX_MAX (BIT(16) - 1) /* VMAX internal VBLANK */ #define IMX283_REG_VMAX CCI_REG24_LE(0x3038) #define IMX283_VMAX_MAX (BIT(16) - 1) /* SHR internal */ #define IMX283_REG_SHR CCI_REG16_LE(0x303b) #define IMX283_SHR_MIN 11 /* * Analog gain control * Gain [dB] = -20log{(2048 - value [10:0]) /2048} * Range: 0dB to approximately +27dB */ #define IMX283_REG_ANALOG_GAIN CCI_REG16_LE(0x3042) #define IMX283_ANA_GAIN_MIN 0 #define IMX283_ANA_GAIN_MAX 1957 #define IMX283_ANA_GAIN_STEP 1 #define IMX283_ANA_GAIN_DEFAULT 0x0 /* * Digital gain control * Gain [dB] = value * 6 * Range: 0dB to +18db */ #define IMX283_REG_DIGITAL_GAIN CCI_REG8(0x3044) #define IMX283_DGTL_GAIN_MIN 0 #define IMX283_DGTL_GAIN_MAX 3 #define IMX283_DGTL_GAIN_DEFAULT 0 #define IMX283_DGTL_GAIN_STEP 1 #define IMX283_REG_HTRIMMING_START CCI_REG16_LE(0x3058) #define IMX283_REG_HTRIMMING_END CCI_REG16_LE(0x305a) #define IMX283_REG_MDSEL18 CCI_REG16_LE(0x30f6) /* Master Mode Operation Control */ #define IMX283_REG_XMSTA CCI_REG8(0x3105) #define IMX283_XMSTA BIT(0) #define IMX283_REG_SYNCDRV CCI_REG8(0x3107) #define IMX283_SYNCDRV_XHS_XVS (0xa0 | 0x02) #define IMX283_SYNCDRV_HIZ (0xa0 | 0x03) /* PLL Standby */ #define IMX283_REG_STBPL CCI_REG8(0x320b) #define IMX283_STBPL_NORMAL 0x00 #define IMX283_STBPL_STANDBY 0x03 /* Input Frequency Setting */ #define IMX283_REG_PLRD1 CCI_REG8(0x36c1) #define IMX283_REG_PLRD2 CCI_REG16_LE(0x36c2) #define IMX283_REG_PLRD3 CCI_REG8(0x36f7) #define IMX283_REG_PLRD4 CCI_REG8(0x36f8) #define IMX283_REG_PLSTMG02 CCI_REG8(0x36aa) #define IMX283_PLSTMG02_VAL 0x00 #define IMX283_REG_EBD_X_OUT_SIZE CCI_REG16_LE(0x3a54) /* Test pattern generator */ #define IMX283_REG_TPG_CTRL CCI_REG8(0x3156) #define IMX283_TPG_CTRL_CLKEN BIT(0) #define IMX283_TPG_CTRL_PATEN BIT(4) #define IMX283_REG_TPG_PAT CCI_REG8(0x3157) #define IMX283_TPG_PAT_ALL_000 0x00 #define IMX283_TPG_PAT_ALL_FFF 0x01 #define IMX283_TPG_PAT_ALL_555 0x02 #define IMX283_TPG_PAT_ALL_AAA 0x03 #define IMX283_TPG_PAT_H_COLOR_BARS 0x0a #define IMX283_TPG_PAT_V_COLOR_BARS 0x0b /* Exposure control */ #define IMX283_EXPOSURE_MIN 52 #define IMX283_EXPOSURE_STEP 1 #define IMX283_EXPOSURE_DEFAULT 1000 #define IMX283_EXPOSURE_MAX 49865 #define IMAGE_PAD 0 #define IMX283_XCLR_MIN_DELAY_US (1 * USEC_PER_MSEC) #define IMX283_XCLR_DELAY_RANGE_US (1 * USEC_PER_MSEC) /* IMX283 native and active pixel array size. */ static const struct v4l2_rect imx283_native_area = { .top = 0, .left = 0, .width = 5592, .height = 3710, }; static const struct v4l2_rect imx283_active_area = { .top = 40, .left = 108, .width = 5472, .height = 3648, }; struct imx283_reg_list { unsigned int num_of_regs; const struct cci_reg_sequence *regs; }; /* Mode : resolution and related config values */ struct imx283_mode { unsigned int mode; /* Bits per pixel */ unsigned int bpp; /* Frame width */ unsigned int width; /* Frame height */ unsigned int height; /* * Minimum horizontal timing in pixel-units * * Note that HMAX is written in 72MHz units, and the datasheet assumes a * 720MHz link frequency. Convert datasheet values with the following: * * For 12 bpp modes (480Mbps) convert with: * hmax = [hmax in 72MHz units] * 480 / 72 * * For 10 bpp modes (576Mbps) convert with: * hmax = [hmax in 72MHz units] * 576 / 72 */ u32 min_hmax; /* minimum V-timing in lines */ u32 min_vmax; /* default H-timing */ u32 default_hmax; /* default V-timing */ u32 default_vmax; /* minimum SHR */ u32 min_shr; /* * Per-mode vertical crop constants used to calculate values * of IMX283REG_WIDCUT and IMX283_REG_VWINPOS. */ u32 veff; u32 vst; u32 vct; /* Horizontal and vertical binning ratio */ u8 hbin_ratio; u8 vbin_ratio; /* Optical Blanking */ u32 horizontal_ob; u32 vertical_ob; /* Analog crop rectangle. */ struct v4l2_rect crop; }; struct imx283_input_frequency { unsigned int mhz; unsigned int reg_count; struct cci_reg_sequence regs[4]; }; static const struct imx283_input_frequency imx283_frequencies[] = { { .mhz = 6 * HZ_PER_MHZ, .reg_count = 4, .regs = { { IMX283_REG_PLRD1, 0x00 }, { IMX283_REG_PLRD2, 0x00f0 }, { IMX283_REG_PLRD3, 0x00 }, { IMX283_REG_PLRD4, 0xc0 }, }, }, { .mhz = 12 * HZ_PER_MHZ, .reg_count = 4, .regs = { { IMX283_REG_PLRD1, 0x01 }, { IMX283_REG_PLRD2, 0x00f0 }, { IMX283_REG_PLRD3, 0x01 }, { IMX283_REG_PLRD4, 0xc0 }, }, }, { .mhz = 18 * HZ_PER_MHZ, .reg_count = 4, .regs = { { IMX283_REG_PLRD1, 0x01 }, { IMX283_REG_PLRD2, 0x00a0 }, { IMX283_REG_PLRD3, 0x01 }, { IMX283_REG_PLRD4, 0x80 }, }, }, { .mhz = 24 * HZ_PER_MHZ, .reg_count = 4, .regs = { { IMX283_REG_PLRD1, 0x02 }, { IMX283_REG_PLRD2, 0x00f0 }, { IMX283_REG_PLRD3, 0x02 }, { IMX283_REG_PLRD4, 0xc0 }, }, }, }; enum imx283_modes { IMX283_MODE_0, IMX283_MODE_1, IMX283_MODE_1A, IMX283_MODE_1S, IMX283_MODE_2, IMX283_MODE_2A, IMX283_MODE_3, IMX283_MODE_4, IMX283_MODE_5, IMX283_MODE_6, }; struct imx283_readout_mode { u8 mdsel1; u8 mdsel2; u8 mdsel3; u8 mdsel4; }; static const struct imx283_readout_mode imx283_readout_modes[] = { /* All pixel scan modes */ [IMX283_MODE_0] = { 0x04, 0x03, 0x10, 0x00 }, /* 12 bit */ [IMX283_MODE_1] = { 0x04, 0x01, 0x00, 0x00 }, /* 10 bit */ [IMX283_MODE_1A] = { 0x04, 0x01, 0x20, 0x50 }, /* 10 bit */ [IMX283_MODE_1S] = { 0x04, 0x41, 0x20, 0x50 }, /* 10 bit */ /* Horizontal / Vertical 2/2-line binning */ [IMX283_MODE_2] = { 0x0d, 0x11, 0x50, 0x00 }, /* 12 bit */ [IMX283_MODE_2A] = { 0x0d, 0x11, 0x70, 0x50 }, /* 12 bit */ /* Horizontal / Vertical 3/3-line binning */ [IMX283_MODE_3] = { 0x1e, 0x18, 0x10, 0x00 }, /* 12 bit */ /* Vertical 2/9 subsampling, horizontal 3 binning cropping */ [IMX283_MODE_4] = { 0x29, 0x18, 0x30, 0x50 }, /* 12 bit */ /* Vertical 2/19 subsampling binning, horizontal 3 binning */ [IMX283_MODE_5] = { 0x2d, 0x18, 0x10, 0x00 }, /* 12 bit */ /* Vertical 2 binning horizontal 2/4, subsampling 16:9 cropping */ [IMX283_MODE_6] = { 0x18, 0x21, 0x00, 0x09 }, /* 10 bit */ /* * New modes should make sure the offset period is complied. * See imx283_exposure() for reference. */ }; static const struct cci_reg_sequence mipi_data_rate_1440Mbps[] = { /* The default register settings provide the 1440Mbps rate */ { CCI_REG8(0x36c5), 0x00 }, /* Undocumented */ { CCI_REG8(0x3ac4), 0x00 }, /* Undocumented */ { IMX283_REG_STBPL, 0x00 }, { IMX283_REG_TCLKPOST, 0xa7 }, { IMX283_REG_THSPREPARE, 0x6f }, { IMX283_REG_THSZERO, 0x9f }, { IMX283_REG_THSTRAIL, 0x5f }, { IMX283_REG_TCLKTRAIL, 0x5f }, { IMX283_REG_TCLKPREPARE, 0x6f }, { IMX283_REG_TCLKZERO, 0x017f }, { IMX283_REG_TLPX, 0x4f }, { IMX283_REG_THSEXIT, 0x47 }, { IMX283_REG_TCLKPRE, 0x07 }, { IMX283_REG_SYSMODE, 0x02 }, }; static const struct cci_reg_sequence mipi_data_rate_720Mbps[] = { /* Undocumented Additions "For 720MBps" Setting */ { CCI_REG8(0x36c5), 0x01 }, /* Undocumented */ { CCI_REG8(0x3ac4), 0x01 }, /* Undocumented */ { IMX283_REG_STBPL, 0x00 }, { IMX283_REG_TCLKPOST, 0x77 }, { IMX283_REG_THSPREPARE, 0x37 }, { IMX283_REG_THSZERO, 0x67 }, { IMX283_REG_THSTRAIL, 0x37 }, { IMX283_REG_TCLKTRAIL, 0x37 }, { IMX283_REG_TCLKPREPARE, 0x37 }, { IMX283_REG_TCLKZERO, 0xdf }, { IMX283_REG_TLPX, 0x2f }, { IMX283_REG_THSEXIT, 0x47 }, { IMX283_REG_TCLKPRE, 0x0f }, { IMX283_REG_SYSMODE, 0x02 }, }; static const s64 link_frequencies[] = { 720 * HZ_PER_MHZ, /* 1440 Mbps lane data rate */ 360 * HZ_PER_MHZ, /* 720 Mbps data lane rate */ }; static const struct imx283_reg_list link_freq_reglist[] = { { /* 720 MHz */ .num_of_regs = ARRAY_SIZE(mipi_data_rate_1440Mbps), .regs = mipi_data_rate_1440Mbps, }, { /* 360 MHz */ .num_of_regs = ARRAY_SIZE(mipi_data_rate_720Mbps), .regs = mipi_data_rate_720Mbps, }, }; /* Mode configs */ static const struct imx283_mode supported_modes_12bit[] = { { /* 20MPix 21.40 fps readout mode 0 */ .mode = IMX283_MODE_0, .bpp = 12, .width = 5472, .height = 3648, .min_hmax = 5914, /* 887 @ 480MHz/72MHz */ .min_vmax = 3793, /* Lines */ .veff = 3694, .vst = 0, .vct = 0, .hbin_ratio = 1, .vbin_ratio = 1, /* 20.00 FPS */ .default_hmax = 6000, /* 900 @ 480MHz/72MHz */ .default_vmax = 4000, .min_shr = 11, .horizontal_ob = 96, .vertical_ob = 16, .crop = { .top = 40, .left = 108, .width = 5472, .height = 3648, }, }, { /* * Readout mode 2 : 2/2 binned mode (2736x1824) */ .mode = IMX283_MODE_2, .bpp = 12, .width = 2736, .height = 1824, .min_hmax = 2414, /* Pixels (362 * 480MHz/72MHz + padding) */ .min_vmax = 3840, /* Lines */ /* 50.00 FPS */ .default_hmax = 2500, /* 375 @ 480MHz/72Mhz */ .default_vmax = 3840, .veff = 1824, .vst = 0, .vct = 0, .hbin_ratio = 2, .vbin_ratio = 2, .min_shr = 12, .horizontal_ob = 48, .vertical_ob = 4, .crop = { .top = 40, .left = 108, .width = 5472, .height = 3648, }, }, { /* * Readout mode 3 : 3/3 binned mode (1824x1216) */ .mode = IMX283_MODE_3, .bpp = 12, .width = 1824, .height = 1216, .min_hmax = 1894, /* Pixels (284 * 480MHz/72MHz + padding) */ .min_vmax = 4200, /* Lines */ /* 60.00 fps */ .default_hmax = 1900, /* 285 @ 480MHz/72Mhz */ .default_vmax = 4200, .veff = 1234, .vst = 0, .vct = 0, .hbin_ratio = 3, .vbin_ratio = 3, .min_shr = 16, .horizontal_ob = 32, .vertical_ob = 4, .crop = { .top = 40, .left = 108, .width = 5472, .height = 3648, }, }, }; static const struct imx283_mode supported_modes_10bit[] = { { /* 20MPix 25.48 fps readout mode 1 */ .mode = IMX283_MODE_1, .bpp = 10, .width = 5472, .height = 3648, .min_hmax = 5960, /* 745 @ 576MHz / 72MHz */ .min_vmax = 3793, /* 25.00 FPS */ .default_hmax = 6000, /* 750 @ 576MHz / 72MHz */ .default_vmax = 3840, .min_shr = 10, .horizontal_ob = 96, .vertical_ob = 16, .crop = { .top = 40, .left = 108, .width = 5472, .height = 3648, }, }, }; static const u32 imx283_mbus_codes[] = { MEDIA_BUS_FMT_SRGGB12_1X12, MEDIA_BUS_FMT_SRGGB10_1X10, }; /* regulator supplies */ static const char *const imx283_supply_name[] = { "vadd", /* Analog (2.9V) supply */ "vdd1", /* Supply Voltage 2 (1.8V) supply */ "vdd2", /* Supply Voltage 3 (1.2V) supply */ }; struct imx283 { struct device *dev; struct regmap *cci; const struct imx283_input_frequency *freq; struct v4l2_subdev sd; struct media_pad pad; struct clk *xclk; struct gpio_desc *reset_gpio; struct regulator_bulk_data supplies[ARRAY_SIZE(imx283_supply_name)]; /* V4L2 Controls */ struct v4l2_ctrl_handler ctrl_handler; struct v4l2_ctrl *exposure; struct v4l2_ctrl *vblank; struct v4l2_ctrl *hblank; struct v4l2_ctrl *vflip; unsigned long link_freq_bitmap; u16 hmax; u32 vmax; }; static inline struct imx283 *to_imx283(struct v4l2_subdev *sd) { return container_of_const(sd, struct imx283, sd); } static inline void get_mode_table(unsigned int code, const struct imx283_mode **mode_list, unsigned int *num_modes) { switch (code) { case MEDIA_BUS_FMT_SRGGB12_1X12: case MEDIA_BUS_FMT_SGRBG12_1X12: case MEDIA_BUS_FMT_SGBRG12_1X12: case MEDIA_BUS_FMT_SBGGR12_1X12: *mode_list = supported_modes_12bit; *num_modes = ARRAY_SIZE(supported_modes_12bit); break; case MEDIA_BUS_FMT_SRGGB10_1X10: case MEDIA_BUS_FMT_SGRBG10_1X10: case MEDIA_BUS_FMT_SGBRG10_1X10: case MEDIA_BUS_FMT_SBGGR10_1X10: *mode_list = supported_modes_10bit; *num_modes = ARRAY_SIZE(supported_modes_10bit); break; default: *mode_list = NULL; *num_modes = 0; break; } } /* Calculate the Pixel Rate based on the current mode */ static u64 imx283_pixel_rate(struct imx283 *imx283, const struct imx283_mode *mode) { u64 link_frequency = link_frequencies[__ffs(imx283->link_freq_bitmap)]; unsigned int bpp = mode->bpp; const unsigned int ddr = 2; /* Double Data Rate */ const unsigned int lanes = 4; /* Only 4 lane support */ u64 numerator = link_frequency * ddr * lanes; do_div(numerator, bpp); return numerator; } /* Convert from a variable pixel_rate to 72 MHz clock cycles */ static u64 imx283_internal_clock(unsigned int pixel_rate, unsigned int pixels) { /* * Determine the following operation without overflow: * pixels = 72 Mhz / pixel_rate * * The internal clock at 72MHz and Pixel Rate (between 240 and 576MHz) * can easily overflow this calculation, so pre-divide to simplify. */ const u32 iclk_pre = 72; const u32 pclk_pre = pixel_rate / HZ_PER_MHZ; u64 numerator = pixels * iclk_pre; do_div(numerator, pclk_pre); return numerator; } /* Internal clock (72MHz) to Pixel Rate clock (Variable) */ static u64 imx283_iclk_to_pix(unsigned int pixel_rate, unsigned int cycles) { /* * Determine the following operation without overflow: * cycles * pixel_rate / 72 MHz * * The internal clock at 72MHz and Pixel Rate (between 240 and 576MHz) * can easily overflow this calculation, so pre-divide to simplify. */ const u32 iclk_pre = 72; const u32 pclk_pre = pixel_rate / HZ_PER_MHZ; u64 numerator = cycles * pclk_pre; do_div(numerator, iclk_pre); return numerator; } /* Determine the exposure based on current hmax, vmax and a given SHR */ static u32 imx283_exposure(struct imx283 *imx283, const struct imx283_mode *mode, u64 shr) { u32 svr = 0; /* SVR feature is not currently supported */ u32 offset; u64 numerator; /* Number of clocks per internal offset period */ offset = mode->mode == IMX283_MODE_0 ? 209 : 157; numerator = (imx283->vmax * (svr + 1) - shr) * imx283->hmax + offset; do_div(numerator, imx283->hmax); return clamp(numerator, 0, U32_MAX); } static void imx283_exposure_limits(struct imx283 *imx283, const struct imx283_mode *mode, s64 *min_exposure, s64 *max_exposure) { u32 svr = 0; /* SVR feature is not currently supported */ u64 min_shr = mode->min_shr; /* Global Shutter is not supported */ u64 max_shr = (svr + 1) * imx283->vmax - 4; max_shr = min(max_shr, BIT(16) - 1); *min_exposure = imx283_exposure(imx283, mode, max_shr); *max_exposure = imx283_exposure(imx283, mode, min_shr); } /* * Integration Time [s] = [ {VMAX x (SVR + 1) – (SHR)} x HMAX + offset ] * / [ 72 x 10^6 ] */ static u32 imx283_shr(struct imx283 *imx283, const struct imx283_mode *mode, u32 exposure) { u32 svr = 0; /* SVR feature is not currently supported */ u32 offset; u64 temp; /* Number of clocks per internal offset period */ offset = mode->mode == IMX283_MODE_0 ? 209 : 157; temp = ((u64)exposure * imx283->hmax - offset); do_div(temp, imx283->hmax); return (imx283->vmax * (svr + 1) - temp); } static const char * const imx283_tpg_menu[] = { "Disabled", "All 000h", "All FFFh", "All 555h", "All AAAh", "Horizontal color bars", "Vertical color bars", }; static const int imx283_tpg_val[] = { IMX283_TPG_PAT_ALL_000, IMX283_TPG_PAT_ALL_000, IMX283_TPG_PAT_ALL_FFF, IMX283_TPG_PAT_ALL_555, IMX283_TPG_PAT_ALL_AAA, IMX283_TPG_PAT_H_COLOR_BARS, IMX283_TPG_PAT_V_COLOR_BARS, }; static int imx283_update_test_pattern(struct imx283 *imx283, u32 pattern_index) { int ret; if (pattern_index >= ARRAY_SIZE(imx283_tpg_val)) return -EINVAL; if (!pattern_index) return cci_write(imx283->cci, IMX283_REG_TPG_CTRL, 0x00, NULL); ret = cci_write(imx283->cci, IMX283_REG_TPG_PAT, imx283_tpg_val[pattern_index], NULL); if (ret) return ret; return cci_write(imx283->cci, IMX283_REG_TPG_CTRL, IMX283_TPG_CTRL_CLKEN | IMX283_TPG_CTRL_PATEN, NULL); } static int imx283_set_ctrl(struct v4l2_ctrl *ctrl) { struct imx283 *imx283 = container_of(ctrl->handler, struct imx283, ctrl_handler); const struct imx283_mode *mode; struct v4l2_mbus_framefmt *fmt; const struct imx283_mode *mode_list; struct v4l2_subdev_state *state; unsigned int num_modes; u64 shr, pixel_rate; int ret = 0; state = v4l2_subdev_get_locked_active_state(&imx283->sd); fmt = v4l2_subdev_state_get_format(state, 0); get_mode_table(fmt->code, &mode_list, &num_modes); mode = v4l2_find_nearest_size(mode_list, num_modes, width, height, fmt->width, fmt->height); /* * The VBLANK control may change the limits of usable exposure, so check * and adjust if necessary. */ if (ctrl->id == V4L2_CID_VBLANK) { /* Honour the VBLANK limits when setting exposure. */ s64 current_exposure, max_exposure, min_exposure; imx283->vmax = mode->height + ctrl->val; imx283_exposure_limits(imx283, mode, &min_exposure, &max_exposure); current_exposure = imx283->exposure->val; current_exposure = clamp(current_exposure, min_exposure, max_exposure); __v4l2_ctrl_modify_range(imx283->exposure, min_exposure, max_exposure, 1, current_exposure); } /* * Applying V4L2 control value only happens * when power is up for streaming */ if (!pm_runtime_get_if_active(imx283->dev)) return 0; switch (ctrl->id) { case V4L2_CID_EXPOSURE: shr = imx283_shr(imx283, mode, ctrl->val); dev_dbg(imx283->dev, "V4L2_CID_EXPOSURE : %d - SHR: %lld\n", ctrl->val, shr); ret = cci_write(imx283->cci, IMX283_REG_SHR, shr, NULL); break; case V4L2_CID_HBLANK: pixel_rate = imx283_pixel_rate(imx283, mode); imx283->hmax = imx283_internal_clock(pixel_rate, mode->width + ctrl->val); dev_dbg(imx283->dev, "V4L2_CID_HBLANK : %d HMAX : %u\n", ctrl->val, imx283->hmax); ret = cci_write(imx283->cci, IMX283_REG_HMAX, imx283->hmax, NULL); break; case V4L2_CID_VBLANK: imx283->vmax = mode->height + ctrl->val; dev_dbg(imx283->dev, "V4L2_CID_VBLANK : %d VMAX : %u\n", ctrl->val, imx283->vmax); ret = cci_write(imx283->cci, IMX283_REG_VMAX, imx283->vmax, NULL); break; case V4L2_CID_ANALOGUE_GAIN: ret = cci_write(imx283->cci, IMX283_REG_ANALOG_GAIN, ctrl->val, NULL); break; case V4L2_CID_DIGITAL_GAIN: ret = cci_write(imx283->cci, IMX283_REG_DIGITAL_GAIN, ctrl->val, NULL); break; case V4L2_CID_VFLIP: /* * VFLIP is managed by BIT(0) of IMX283_REG_HTRIMMING address, hence * both need to be set simultaneously. */ if (ctrl->val) { cci_write(imx283->cci, IMX283_REG_HTRIMMING, IMX283_HTRIMMING_EN | IMX283_MDVREV, &ret); } else { cci_write(imx283->cci, IMX283_REG_HTRIMMING, IMX283_HTRIMMING_EN, &ret); } break; case V4L2_CID_TEST_PATTERN: ret = imx283_update_test_pattern(imx283, ctrl->val); break; default: dev_err(imx283->dev, "ctrl(id:0x%x, val:0x%x) is not handled\n", ctrl->id, ctrl->val); break; } pm_runtime_put(imx283->dev); return ret; } static const struct v4l2_ctrl_ops imx283_ctrl_ops = { .s_ctrl = imx283_set_ctrl, }; static int imx283_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { if (code->index >= ARRAY_SIZE(imx283_mbus_codes)) return -EINVAL; code->code = imx283_mbus_codes[code->index]; return 0; } static int imx283_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fse) { const struct imx283_mode *mode_list; unsigned int num_modes; get_mode_table(fse->code, &mode_list, &num_modes); if (fse->index >= num_modes) return -EINVAL; fse->min_width = mode_list[fse->index].width; fse->max_width = fse->min_width; fse->min_height = mode_list[fse->index].height; fse->max_height = fse->min_height; return 0; } static void imx283_update_image_pad_format(struct imx283 *imx283, const struct imx283_mode *mode, struct v4l2_mbus_framefmt *format) { format->width = mode->width; format->height = mode->height; format->field = V4L2_FIELD_NONE; format->colorspace = V4L2_COLORSPACE_RAW; format->ycbcr_enc = V4L2_YCBCR_ENC_601; format->quantization = V4L2_QUANTIZATION_FULL_RANGE; format->xfer_func = V4L2_XFER_FUNC_NONE; } static int imx283_init_state(struct v4l2_subdev *sd, struct v4l2_subdev_state *state) { struct imx283 *imx283 = to_imx283(sd); struct v4l2_mbus_framefmt *format; const struct imx283_mode *mode; struct v4l2_rect *crop; /* Initialize try_fmt */ format = v4l2_subdev_state_get_format(state, IMAGE_PAD); mode = &supported_modes_12bit[0]; format->code = MEDIA_BUS_FMT_SRGGB12_1X12; imx283_update_image_pad_format(imx283, mode, format); /* Initialize crop rectangle to mode default */ crop = v4l2_subdev_state_get_crop(state, IMAGE_PAD); *crop = mode->crop; return 0; } static void imx283_set_framing_limits(struct imx283 *imx283, const struct imx283_mode *mode) { u64 pixel_rate = imx283_pixel_rate(imx283, mode); u64 min_hblank, max_hblank, def_hblank; /* Initialise hmax and vmax for exposure calculations */ imx283->hmax = imx283_internal_clock(pixel_rate, mode->default_hmax); imx283->vmax = mode->default_vmax; /* * Horizontal Blanking * Convert the HMAX_MAX (72MHz) to Pixel rate values for HBLANK_MAX */ min_hblank = mode->min_hmax - mode->width; max_hblank = imx283_iclk_to_pix(pixel_rate, IMX283_HMAX_MAX) - mode->width; def_hblank = mode->default_hmax - mode->width; __v4l2_ctrl_modify_range(imx283->hblank, min_hblank, max_hblank, 1, def_hblank); __v4l2_ctrl_s_ctrl(imx283->hblank, def_hblank); /* Vertical Blanking */ __v4l2_ctrl_modify_range(imx283->vblank, mode->min_vmax - mode->height, IMX283_VMAX_MAX - mode->height, 1, mode->default_vmax - mode->height); __v4l2_ctrl_s_ctrl(imx283->vblank, mode->default_vmax - mode->height); } static int imx283_set_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *fmt) { struct v4l2_mbus_framefmt *format; const struct imx283_mode *mode; struct imx283 *imx283 = to_imx283(sd); const struct imx283_mode *mode_list; unsigned int num_modes; get_mode_table(fmt->format.code, &mode_list, &num_modes); mode = v4l2_find_nearest_size(mode_list, num_modes, width, height, fmt->format.width, fmt->format.height); fmt->format.width = mode->width; fmt->format.height = mode->height; fmt->format.field = V4L2_FIELD_NONE; fmt->format.colorspace = V4L2_COLORSPACE_RAW; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_601; fmt->format.quantization = V4L2_QUANTIZATION_FULL_RANGE; fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; format = v4l2_subdev_state_get_format(sd_state, 0); if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) imx283_set_framing_limits(imx283, mode); *format = fmt->format; return 0; } static int imx283_standby_cancel(struct imx283 *imx283) { unsigned int link_freq_idx; int ret = 0; cci_write(imx283->cci, IMX283_REG_STANDBY, IMX283_STBLOGIC | IMX283_STBDV, &ret); /* Configure PLL clocks based on the xclk */ cci_multi_reg_write(imx283->cci, imx283->freq->regs, imx283->freq->reg_count, &ret); dev_dbg(imx283->dev, "Using clk freq %ld MHz", imx283->freq->mhz / HZ_PER_MHZ); /* Initialise communication */ cci_write(imx283->cci, IMX283_REG_PLSTMG08, IMX283_PLSTMG08_VAL, &ret); cci_write(imx283->cci, IMX283_REG_PLSTMG02, IMX283_PLSTMG02_VAL, &ret); /* Enable PLL */ cci_write(imx283->cci, IMX283_REG_STBPL, IMX283_STBPL_NORMAL, &ret); /* Configure the MIPI link speed */ link_freq_idx = __ffs(imx283->link_freq_bitmap); cci_multi_reg_write(imx283->cci, link_freq_reglist[link_freq_idx].regs, link_freq_reglist[link_freq_idx].num_of_regs, &ret); /* 1st Stabilisation period of 1 ms or more */ usleep_range(1000, 2000); /* Activate */ cci_write(imx283->cci, IMX283_REG_STANDBY, IMX283_ACTIVE, &ret); /* 2nd Stabilisation period of 19ms or more */ usleep_range(19000, 20000); cci_write(imx283->cci, IMX283_REG_CLAMP, IMX283_CLPSQRST, &ret); cci_write(imx283->cci, IMX283_REG_XMSTA, 0, &ret); cci_write(imx283->cci, IMX283_REG_SYNCDRV, IMX283_SYNCDRV_XHS_XVS, &ret); return ret; } /* Start streaming */ static int imx283_start_streaming(struct imx283 *imx283, struct v4l2_subdev_state *state) { const struct imx283_readout_mode *readout; const struct imx283_mode *mode; const struct v4l2_mbus_framefmt *fmt; const struct imx283_mode *mode_list; unsigned int num_modes; u32 v_widcut; s32 v_pos; u32 write_v_size; u32 y_out_size; int ret = 0; fmt = v4l2_subdev_state_get_format(state, 0); get_mode_table(fmt->code, &mode_list, &num_modes); mode = v4l2_find_nearest_size(mode_list, num_modes, width, height, fmt->width, fmt->height); ret = imx283_standby_cancel(imx283); if (ret) { dev_err(imx283->dev, "failed to cancel standby\n"); return ret; } /* * Set the readout mode registers. * MDSEL3 and MDSEL4 are updated to enable Arbitrary Vertical Cropping. */ readout = &imx283_readout_modes[mode->mode]; cci_write(imx283->cci, IMX283_REG_MDSEL1, readout->mdsel1, &ret); cci_write(imx283->cci, IMX283_REG_MDSEL2, readout->mdsel2, &ret); cci_write(imx283->cci, IMX283_REG_MDSEL3, readout->mdsel3 | IMX283_MDSEL3_VCROP_EN, &ret); cci_write(imx283->cci, IMX283_REG_MDSEL4, readout->mdsel4 | IMX283_MDSEL4_VCROP_EN, &ret); /* Mode 1S specific entries from the Readout Drive Mode Tables */ if (mode->mode == IMX283_MODE_1S) { cci_write(imx283->cci, IMX283_REG_MDSEL7, 0x01, &ret); cci_write(imx283->cci, IMX283_REG_MDSEL18, 0x1098, &ret); } if (ret) { dev_err(imx283->dev, "failed to set readout\n"); return ret; } /* Initialise SVR. Unsupported for now - Always 0 */ cci_write(imx283->cci, IMX283_REG_SVR, 0x00, &ret); dev_dbg(imx283->dev, "Mode: Size %d x %d\n", mode->width, mode->height); dev_dbg(imx283->dev, "Analogue Crop (in the mode) %d,%d %dx%d\n", mode->crop.left, mode->crop.top, mode->crop.width, mode->crop.height); y_out_size = mode->crop.height / mode->vbin_ratio; write_v_size = y_out_size + mode->vertical_ob; /* * cropping start position = (VWINPOS – Vst) × 2 * cropping width = Veff – (VWIDCUT – Vct) × 2 */ v_pos = imx283->vflip->val ? ((-mode->crop.top / mode->vbin_ratio) / 2) + mode->vst : ((mode->crop.top / mode->vbin_ratio) / 2) + mode->vst; v_widcut = ((mode->veff - y_out_size) / 2) + mode->vct; cci_write(imx283->cci, IMX283_REG_Y_OUT_SIZE, y_out_size, &ret); cci_write(imx283->cci, IMX283_REG_WRITE_VSIZE, write_v_size, &ret); cci_write(imx283->cci, IMX283_REG_VWIDCUT, v_widcut, &ret); cci_write(imx283->cci, IMX283_REG_VWINPOS, v_pos, &ret); cci_write(imx283->cci, IMX283_REG_OB_SIZE_V, mode->vertical_ob, &ret); /* TODO: Validate mode->crop is fully contained within imx283_native_area */ cci_write(imx283->cci, IMX283_REG_HTRIMMING_START, mode->crop.left, &ret); cci_write(imx283->cci, IMX283_REG_HTRIMMING_END, mode->crop.left + mode->crop.width, &ret); /* Disable embedded data */ cci_write(imx283->cci, IMX283_REG_EBD_X_OUT_SIZE, 0, &ret); /* Apply customized values from controls (HMAX/VMAX/SHR) */ ret = __v4l2_ctrl_handler_setup(imx283->sd.ctrl_handler); return ret; } static int imx283_enable_streams(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, u32 pad, u64 streams_mask) { struct imx283 *imx283 = to_imx283(sd); int ret; if (pad != IMAGE_PAD) return -EINVAL; ret = pm_runtime_get_sync(imx283->dev); if (ret < 0) { pm_runtime_put_noidle(imx283->dev); return ret; } ret = imx283_start_streaming(imx283, state); if (ret) goto err_rpm_put; return 0; err_rpm_put: pm_runtime_mark_last_busy(imx283->dev); pm_runtime_put_autosuspend(imx283->dev); return ret; } static int imx283_disable_streams(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, u32 pad, u64 streams_mask) { struct imx283 *imx283 = to_imx283(sd); int ret; if (pad != IMAGE_PAD) return -EINVAL; ret = cci_write(imx283->cci, IMX283_REG_STANDBY, IMX283_STBLOGIC, NULL); if (ret) dev_err(imx283->dev, "Failed to stop stream\n"); pm_runtime_mark_last_busy(imx283->dev); pm_runtime_put_autosuspend(imx283->dev); return ret; } /* Power/clock management functions */ static int imx283_power_on(struct imx283 *imx283) { int ret; ret = regulator_bulk_enable(ARRAY_SIZE(imx283_supply_name), imx283->supplies); if (ret) { dev_err(imx283->dev, "failed to enable regulators\n"); return ret; } ret = clk_prepare_enable(imx283->xclk); if (ret) { dev_err(imx283->dev, "failed to enable clock\n"); goto reg_off; } gpiod_set_value_cansleep(imx283->reset_gpio, 0); usleep_range(IMX283_XCLR_MIN_DELAY_US, IMX283_XCLR_MIN_DELAY_US + IMX283_XCLR_DELAY_RANGE_US); return 0; reg_off: regulator_bulk_disable(ARRAY_SIZE(imx283_supply_name), imx283->supplies); return ret; } static int imx283_power_off(struct imx283 *imx283) { gpiod_set_value_cansleep(imx283->reset_gpio, 1); regulator_bulk_disable(ARRAY_SIZE(imx283_supply_name), imx283->supplies); clk_disable_unprepare(imx283->xclk); return 0; } static int imx283_runtime_resume(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx283 *imx283 = to_imx283(sd); return imx283_power_on(imx283); } static int imx283_runtime_suspend(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx283 *imx283 = to_imx283(sd); imx283_power_off(imx283); return 0; } static int imx283_get_regulators(struct imx283 *imx283) { unsigned int i; for (i = 0; i < ARRAY_SIZE(imx283_supply_name); i++) imx283->supplies[i].supply = imx283_supply_name[i]; return devm_regulator_bulk_get(imx283->dev, ARRAY_SIZE(imx283_supply_name), imx283->supplies); } /* Verify chip ID */ static int imx283_identify_module(struct imx283 *imx283) { int ret; u64 val; ret = cci_read(imx283->cci, IMX283_REG_CHIP_ID, &val, NULL); if (ret) { dev_err(imx283->dev, "failed to read chip id %x, with error %d\n", IMX283_CHIP_ID, ret); return ret; } if (val != IMX283_CHIP_ID) { dev_err(imx283->dev, "chip id mismatch: %x!=%llx\n", IMX283_CHIP_ID, val); return -EIO; } return 0; } static int imx283_get_selection(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_selection *sel) { switch (sel->target) { case V4L2_SEL_TGT_CROP: { sel->r = *v4l2_subdev_state_get_crop(sd_state, 0); return 0; } case V4L2_SEL_TGT_NATIVE_SIZE: sel->r = imx283_native_area; return 0; case V4L2_SEL_TGT_CROP_DEFAULT: case V4L2_SEL_TGT_CROP_BOUNDS: sel->r = imx283_active_area; return 0; default: return -EINVAL; } } static const struct v4l2_subdev_core_ops imx283_core_ops = { .subscribe_event = v4l2_ctrl_subdev_subscribe_event, .unsubscribe_event = v4l2_event_subdev_unsubscribe, }; static const struct v4l2_subdev_video_ops imx283_video_ops = { .s_stream = v4l2_subdev_s_stream_helper, }; static const struct v4l2_subdev_pad_ops imx283_pad_ops = { .enum_mbus_code = imx283_enum_mbus_code, .get_fmt = v4l2_subdev_get_fmt, .set_fmt = imx283_set_pad_format, .get_selection = imx283_get_selection, .enum_frame_size = imx283_enum_frame_size, .enable_streams = imx283_enable_streams, .disable_streams = imx283_disable_streams, }; static const struct v4l2_subdev_internal_ops imx283_internal_ops = { .init_state = imx283_init_state, }; static const struct v4l2_subdev_ops imx283_subdev_ops = { .core = &imx283_core_ops, .video = &imx283_video_ops, .pad = &imx283_pad_ops, }; /* Initialize control handlers */ static int imx283_init_controls(struct imx283 *imx283) { struct v4l2_ctrl_handler *ctrl_hdlr; struct v4l2_fwnode_device_properties props; struct v4l2_ctrl *link_freq; const struct imx283_mode *mode = &supported_modes_12bit[0]; u64 min_hblank, max_hblank, def_hblank; u64 pixel_rate; int ret; ctrl_hdlr = &imx283->ctrl_handler; ret = v4l2_ctrl_handler_init(ctrl_hdlr, 16); if (ret) return ret; /* * Create the controls here, but mode specific limits are setup * in the imx283_set_framing_limits() call below. */ /* By default, PIXEL_RATE is read only */ pixel_rate = imx283_pixel_rate(imx283, mode); v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_PIXEL_RATE, pixel_rate, pixel_rate, 1, pixel_rate); link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_LINK_FREQ, __fls(imx283->link_freq_bitmap), __ffs(imx283->link_freq_bitmap), link_frequencies); if (link_freq) link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; /* Initialise vblank/hblank/exposure based on the current mode. */ imx283->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_VBLANK, mode->min_vmax - mode->height, IMX283_VMAX_MAX, 1, mode->default_vmax - mode->height); min_hblank = mode->min_hmax - mode->width; max_hblank = imx283_iclk_to_pix(pixel_rate, IMX283_HMAX_MAX) - mode->width; def_hblank = mode->default_hmax - mode->width; imx283->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_HBLANK, min_hblank, max_hblank, 1, def_hblank); imx283->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_EXPOSURE, IMX283_EXPOSURE_MIN, IMX283_EXPOSURE_MAX, IMX283_EXPOSURE_STEP, IMX283_EXPOSURE_DEFAULT); v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, IMX283_ANA_GAIN_MIN, IMX283_ANA_GAIN_MAX, IMX283_ANA_GAIN_STEP, IMX283_ANA_GAIN_DEFAULT); v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_DIGITAL_GAIN, IMX283_DGTL_GAIN_MIN, IMX283_DGTL_GAIN_MAX, IMX283_DGTL_GAIN_STEP, IMX283_DGTL_GAIN_DEFAULT); imx283->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); if (imx283->vflip) imx283->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT; v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_TEST_PATTERN, ARRAY_SIZE(imx283_tpg_menu) - 1, 0, 0, imx283_tpg_menu); if (ctrl_hdlr->error) { ret = ctrl_hdlr->error; dev_err(imx283->dev, "control init failed (%d)\n", ret); goto error; } ret = v4l2_fwnode_device_parse(imx283->dev, &props); if (ret) goto error; ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx283_ctrl_ops, &props); if (ret) goto error; imx283->sd.ctrl_handler = ctrl_hdlr; mutex_lock(imx283->ctrl_handler.lock); /* Setup exposure and frame/line length limits. */ imx283_set_framing_limits(imx283, mode); mutex_unlock(imx283->ctrl_handler.lock); return 0; error: v4l2_ctrl_handler_free(ctrl_hdlr); return ret; } static int imx283_parse_endpoint(struct imx283 *imx283) { struct fwnode_handle *fwnode; struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_CSI2_DPHY }; struct fwnode_handle *ep; int ret; fwnode = dev_fwnode(imx283->dev); ep = fwnode_graph_get_next_endpoint(fwnode, NULL); if (!ep) { dev_err(imx283->dev, "Failed to get next endpoint\n"); return -ENXIO; } ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); fwnode_handle_put(ep); if (ret) return ret; if (bus_cfg.bus.mipi_csi2.num_data_lanes != 4) { dev_err(imx283->dev, "number of CSI2 data lanes %d is not supported\n", bus_cfg.bus.mipi_csi2.num_data_lanes); ret = -EINVAL; goto done_endpoint_free; } ret = v4l2_link_freq_to_bitmap(imx283->dev, bus_cfg.link_frequencies, bus_cfg.nr_of_link_frequencies, link_frequencies, ARRAY_SIZE(link_frequencies), &imx283->link_freq_bitmap); done_endpoint_free: v4l2_fwnode_endpoint_free(&bus_cfg); return ret; }; static int imx283_probe(struct i2c_client *client) { struct imx283 *imx283; unsigned int i; unsigned int xclk_freq; int ret; imx283 = devm_kzalloc(&client->dev, sizeof(*imx283), GFP_KERNEL); if (!imx283) return -ENOMEM; imx283->dev = &client->dev; v4l2_i2c_subdev_init(&imx283->sd, client, &imx283_subdev_ops); imx283->cci = devm_cci_regmap_init_i2c(client, 16); if (IS_ERR(imx283->cci)) { ret = PTR_ERR(imx283->cci); dev_err(imx283->dev, "failed to initialize CCI: %d\n", ret); return ret; } /* Get system clock (xclk) */ imx283->xclk = devm_clk_get(imx283->dev, NULL); if (IS_ERR(imx283->xclk)) { return dev_err_probe(imx283->dev, PTR_ERR(imx283->xclk), "failed to get xclk\n"); } xclk_freq = clk_get_rate(imx283->xclk); for (i = 0; i < ARRAY_SIZE(imx283_frequencies); i++) { if (xclk_freq == imx283_frequencies[i].mhz) { imx283->freq = &imx283_frequencies[i]; break; } } if (!imx283->freq) { dev_err(imx283->dev, "xclk frequency unsupported: %d Hz\n", xclk_freq); return -EINVAL; } ret = imx283_get_regulators(imx283); if (ret) { return dev_err_probe(imx283->dev, ret, "failed to get regulators\n"); } ret = imx283_parse_endpoint(imx283); if (ret) { dev_err(imx283->dev, "failed to parse endpoint configuration\n"); return ret; } /* Request optional enable pin */ imx283->reset_gpio = devm_gpiod_get_optional(imx283->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(imx283->reset_gpio)) return dev_err_probe(imx283->dev, PTR_ERR(imx283->reset_gpio), "failed to get reset GPIO\n"); /* * The sensor must be powered for imx283_identify_module() * to be able to read the CHIP_ID register */ ret = imx283_power_on(imx283); if (ret) return ret; ret = imx283_identify_module(imx283); if (ret) goto error_power_off; /* * Enable runtime PM with autosuspend. As the device has been powered * manually, mark it as active, and increase the usage count without * resuming the device. */ pm_runtime_set_active(imx283->dev); pm_runtime_get_noresume(imx283->dev); pm_runtime_enable(imx283->dev); pm_runtime_set_autosuspend_delay(imx283->dev, 1000); pm_runtime_use_autosuspend(imx283->dev); /* This needs the pm runtime to be registered. */ ret = imx283_init_controls(imx283); if (ret) goto error_pm; /* Initialize subdev */ imx283->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; imx283->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; imx283->sd.internal_ops = &imx283_internal_ops; /* Initialize source pads */ imx283->pad.flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&imx283->sd.entity, 1, &imx283->pad); if (ret) { dev_err(imx283->dev, "failed to init entity pads: %d\n", ret); goto error_handler_free; } imx283->sd.state_lock = imx283->ctrl_handler.lock; ret = v4l2_subdev_init_finalize(&imx283->sd); if (ret < 0) { dev_err(imx283->dev, "subdev init error: %d\n", ret); goto error_media_entity; } ret = v4l2_async_register_subdev_sensor(&imx283->sd); if (ret < 0) { dev_err(imx283->dev, "failed to register sensor sub-device: %d\n", ret); goto error_subdev_cleanup; } /* * Decrease the PM usage count. The device will get suspended after the * autosuspend delay, turning the power off. */ pm_runtime_mark_last_busy(imx283->dev); pm_runtime_put_autosuspend(imx283->dev); return 0; error_subdev_cleanup: v4l2_subdev_cleanup(&imx283->sd); error_media_entity: media_entity_cleanup(&imx283->sd.entity); error_handler_free: v4l2_ctrl_handler_free(imx283->sd.ctrl_handler); error_pm: pm_runtime_disable(imx283->dev); pm_runtime_set_suspended(imx283->dev); error_power_off: imx283_power_off(imx283); return ret; } static void imx283_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); struct imx283 *imx283 = to_imx283(sd); v4l2_async_unregister_subdev(sd); v4l2_subdev_cleanup(&imx283->sd); media_entity_cleanup(&sd->entity); v4l2_ctrl_handler_free(imx283->sd.ctrl_handler); pm_runtime_disable(imx283->dev); if (!pm_runtime_status_suspended(imx283->dev)) imx283_power_off(imx283); pm_runtime_set_suspended(imx283->dev); } static DEFINE_RUNTIME_DEV_PM_OPS(imx283_pm_ops, imx283_runtime_suspend, imx283_runtime_resume, NULL); static const struct of_device_id imx283_dt_ids[] = { { .compatible = "sony,imx283" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx283_dt_ids); static struct i2c_driver imx283_i2c_driver = { .driver = { .name = "imx283", .pm = pm_ptr(&imx283_pm_ops), .of_match_table = imx283_dt_ids, }, .probe = imx283_probe, .remove = imx283_remove, }; module_i2c_driver(imx283_i2c_driver); MODULE_AUTHOR("Will Whang "); MODULE_AUTHOR("Kieran Bingham "); MODULE_AUTHOR("Umang Jain "); MODULE_DESCRIPTION("Sony IMX283 Sensor Driver"); MODULE_LICENSE("GPL");