/* * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved. * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include #include #include #include #include #include #ifdef CONFIG_INFINIBAND_QIB_DCA #include #endif #include #include "qib.h" #include "qib_common.h" #include "qib_mad.h" #ifdef CONFIG_DEBUG_FS #include "qib_debugfs.h" #include "qib_verbs.h" #endif #undef pr_fmt #define pr_fmt(fmt) QIB_DRV_NAME ": " fmt /* * min buffers we want to have per context, after driver */ #define QIB_MIN_USER_CTXT_BUFCNT 7 #define QLOGIC_IB_R_SOFTWARE_MASK 0xFF #define QLOGIC_IB_R_SOFTWARE_SHIFT 24 #define QLOGIC_IB_R_EMULATOR_MASK (1ULL<<62) /* * Number of ctxts we are configured to use (to allow for more pio * buffers per ctxt, etc.) Zero means use chip value. */ ushort qib_cfgctxts; module_param_named(cfgctxts, qib_cfgctxts, ushort, S_IRUGO); MODULE_PARM_DESC(cfgctxts, "Set max number of contexts to use"); unsigned qib_numa_aware; module_param_named(numa_aware, qib_numa_aware, uint, S_IRUGO); MODULE_PARM_DESC(numa_aware, "0 -> PSM allocation close to HCA, 1 -> PSM allocation local to process"); /* * If set, do not write to any regs if avoidable, hack to allow * check for deranged default register values. */ ushort qib_mini_init; module_param_named(mini_init, qib_mini_init, ushort, S_IRUGO); MODULE_PARM_DESC(mini_init, "If set, do minimal diag init"); unsigned qib_n_krcv_queues; module_param_named(krcvqs, qib_n_krcv_queues, uint, S_IRUGO); MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port"); unsigned qib_cc_table_size; module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO); MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984"); static void verify_interrupt(struct timer_list *); DEFINE_XARRAY_FLAGS(qib_dev_table, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ); u32 qib_cpulist_count; unsigned long *qib_cpulist; /* set number of contexts we'll actually use */ void qib_set_ctxtcnt(struct qib_devdata *dd) { if (!qib_cfgctxts) { dd->cfgctxts = dd->first_user_ctxt + num_online_cpus(); if (dd->cfgctxts > dd->ctxtcnt) dd->cfgctxts = dd->ctxtcnt; } else if (qib_cfgctxts < dd->num_pports) dd->cfgctxts = dd->ctxtcnt; else if (qib_cfgctxts <= dd->ctxtcnt) dd->cfgctxts = qib_cfgctxts; else dd->cfgctxts = dd->ctxtcnt; dd->freectxts = (dd->first_user_ctxt > dd->cfgctxts) ? 0 : dd->cfgctxts - dd->first_user_ctxt; } /* * Common code for creating the receive context array. */ int qib_create_ctxts(struct qib_devdata *dd) { unsigned i; int local_node_id = pcibus_to_node(dd->pcidev->bus); if (local_node_id < 0) local_node_id = numa_node_id(); dd->assigned_node_id = local_node_id; /* * Allocate full ctxtcnt array, rather than just cfgctxts, because * cleanup iterates across all possible ctxts. */ dd->rcd = kcalloc(dd->ctxtcnt, sizeof(*dd->rcd), GFP_KERNEL); if (!dd->rcd) return -ENOMEM; /* create (one or more) kctxt */ for (i = 0; i < dd->first_user_ctxt; ++i) { struct qib_pportdata *ppd; struct qib_ctxtdata *rcd; if (dd->skip_kctxt_mask & (1 << i)) continue; ppd = dd->pport + (i % dd->num_pports); rcd = qib_create_ctxtdata(ppd, i, dd->assigned_node_id); if (!rcd) { qib_dev_err(dd, "Unable to allocate ctxtdata for Kernel ctxt, failing\n"); kfree(dd->rcd); dd->rcd = NULL; return -ENOMEM; } rcd->pkeys[0] = QIB_DEFAULT_P_KEY; rcd->seq_cnt = 1; } return 0; } /* * Common code for user and kernel context setup. */ struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *ppd, u32 ctxt, int node_id) { struct qib_devdata *dd = ppd->dd; struct qib_ctxtdata *rcd; rcd = kzalloc_node(sizeof(*rcd), GFP_KERNEL, node_id); if (rcd) { INIT_LIST_HEAD(&rcd->qp_wait_list); rcd->node_id = node_id; rcd->ppd = ppd; rcd->dd = dd; rcd->cnt = 1; rcd->ctxt = ctxt; dd->rcd[ctxt] = rcd; #ifdef CONFIG_DEBUG_FS if (ctxt < dd->first_user_ctxt) { /* N/A for PSM contexts */ rcd->opstats = kzalloc_node(sizeof(*rcd->opstats), GFP_KERNEL, node_id); if (!rcd->opstats) { kfree(rcd); qib_dev_err(dd, "Unable to allocate per ctxt stats buffer\n"); return NULL; } } #endif dd->f_init_ctxt(rcd); /* * To avoid wasting a lot of memory, we allocate 32KB chunks * of physically contiguous memory, advance through it until * used up and then allocate more. Of course, we need * memory to store those extra pointers, now. 32KB seems to * be the most that is "safe" under memory pressure * (creating large files and then copying them over * NFS while doing lots of MPI jobs). The OOM killer can * get invoked, even though we say we can sleep and this can * cause significant system problems.... */ rcd->rcvegrbuf_size = 0x8000; rcd->rcvegrbufs_perchunk = rcd->rcvegrbuf_size / dd->rcvegrbufsize; rcd->rcvegrbuf_chunks = (rcd->rcvegrcnt + rcd->rcvegrbufs_perchunk - 1) / rcd->rcvegrbufs_perchunk; rcd->rcvegrbufs_perchunk_shift = ilog2(rcd->rcvegrbufs_perchunk); } return rcd; } /* * Common code for initializing the physical port structure. */ int qib_init_pportdata(struct qib_pportdata *ppd, struct qib_devdata *dd, u8 hw_pidx, u8 port) { int size; ppd->dd = dd; ppd->hw_pidx = hw_pidx; ppd->port = port; /* IB port number, not index */ spin_lock_init(&ppd->sdma_lock); spin_lock_init(&ppd->lflags_lock); spin_lock_init(&ppd->cc_shadow_lock); init_waitqueue_head(&ppd->state_wait); timer_setup(&ppd->symerr_clear_timer, qib_clear_symerror_on_linkup, 0); ppd->qib_wq = NULL; ppd->ibport_data.pmastats = alloc_percpu(struct qib_pma_counters); if (!ppd->ibport_data.pmastats) return -ENOMEM; ppd->ibport_data.rvp.rc_acks = alloc_percpu(u64); ppd->ibport_data.rvp.rc_qacks = alloc_percpu(u64); ppd->ibport_data.rvp.rc_delayed_comp = alloc_percpu(u64); if (!(ppd->ibport_data.rvp.rc_acks) || !(ppd->ibport_data.rvp.rc_qacks) || !(ppd->ibport_data.rvp.rc_delayed_comp)) return -ENOMEM; if (qib_cc_table_size < IB_CCT_MIN_ENTRIES) goto bail; ppd->cc_supported_table_entries = min(max_t(int, qib_cc_table_size, IB_CCT_MIN_ENTRIES), IB_CCT_ENTRIES*IB_CC_TABLE_CAP_DEFAULT); ppd->cc_max_table_entries = ppd->cc_supported_table_entries/IB_CCT_ENTRIES; size = IB_CC_TABLE_CAP_DEFAULT * sizeof(struct ib_cc_table_entry) * IB_CCT_ENTRIES; ppd->ccti_entries = kzalloc(size, GFP_KERNEL); if (!ppd->ccti_entries) goto bail; size = IB_CC_CCS_ENTRIES * sizeof(struct ib_cc_congestion_entry); ppd->congestion_entries = kzalloc(size, GFP_KERNEL); if (!ppd->congestion_entries) goto bail_1; size = sizeof(struct cc_table_shadow); ppd->ccti_entries_shadow = kzalloc(size, GFP_KERNEL); if (!ppd->ccti_entries_shadow) goto bail_2; size = sizeof(struct ib_cc_congestion_setting_attr); ppd->congestion_entries_shadow = kzalloc(size, GFP_KERNEL); if (!ppd->congestion_entries_shadow) goto bail_3; return 0; bail_3: kfree(ppd->ccti_entries_shadow); ppd->ccti_entries_shadow = NULL; bail_2: kfree(ppd->congestion_entries); ppd->congestion_entries = NULL; bail_1: kfree(ppd->ccti_entries); ppd->ccti_entries = NULL; bail: /* User is intentionally disabling the congestion control agent */ if (!qib_cc_table_size) return 0; if (qib_cc_table_size < IB_CCT_MIN_ENTRIES) { qib_cc_table_size = 0; qib_dev_err(dd, "Congestion Control table size %d less than minimum %d for port %d\n", qib_cc_table_size, IB_CCT_MIN_ENTRIES, port); } qib_dev_err(dd, "Congestion Control Agent disabled for port %d\n", port); return 0; } static int init_pioavailregs(struct qib_devdata *dd) { int ret, pidx; u64 *status_page; dd->pioavailregs_dma = dma_alloc_coherent( &dd->pcidev->dev, PAGE_SIZE, &dd->pioavailregs_phys, GFP_KERNEL); if (!dd->pioavailregs_dma) { qib_dev_err(dd, "failed to allocate PIOavail reg area in memory\n"); ret = -ENOMEM; goto done; } /* * We really want L2 cache aligned, but for current CPUs of * interest, they are the same. */ status_page = (u64 *) ((char *) dd->pioavailregs_dma + ((2 * L1_CACHE_BYTES + dd->pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES)); /* device status comes first, for backwards compatibility */ dd->devstatusp = status_page; *status_page++ = 0; for (pidx = 0; pidx < dd->num_pports; ++pidx) { dd->pport[pidx].statusp = status_page; *status_page++ = 0; } /* * Setup buffer to hold freeze and other messages, accessible to * apps, following statusp. This is per-unit, not per port. */ dd->freezemsg = (char *) status_page; *dd->freezemsg = 0; /* length of msg buffer is "whatever is left" */ ret = (char *) status_page - (char *) dd->pioavailregs_dma; dd->freezelen = PAGE_SIZE - ret; ret = 0; done: return ret; } /** * init_shadow_tids - allocate the shadow TID array * @dd: the qlogic_ib device * * allocate the shadow TID array, so we can qib_munlock previous * entries. It may make more sense to move the pageshadow to the * ctxt data structure, so we only allocate memory for ctxts actually * in use, since we at 8k per ctxt, now. * We don't want failures here to prevent use of the driver/chip, * so no return value. */ static void init_shadow_tids(struct qib_devdata *dd) { struct page **pages; dma_addr_t *addrs; pages = vzalloc(array_size(sizeof(struct page *), dd->cfgctxts * dd->rcvtidcnt)); if (!pages) goto bail; addrs = vzalloc(array_size(sizeof(dma_addr_t), dd->cfgctxts * dd->rcvtidcnt)); if (!addrs) goto bail_free; dd->pageshadow = pages; dd->physshadow = addrs; return; bail_free: vfree(pages); bail: dd->pageshadow = NULL; } /* * Do initialization for device that is only needed on * first detect, not on resets. */ static int loadtime_init(struct qib_devdata *dd) { int ret = 0; if (((dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) & QLOGIC_IB_R_SOFTWARE_MASK) != QIB_CHIP_SWVERSION) { qib_dev_err(dd, "Driver only handles version %d, chip swversion is %d (%llx), failing\n", QIB_CHIP_SWVERSION, (int)(dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) & QLOGIC_IB_R_SOFTWARE_MASK, (unsigned long long) dd->revision); ret = -ENOSYS; goto done; } if (dd->revision & QLOGIC_IB_R_EMULATOR_MASK) qib_devinfo(dd->pcidev, "%s", dd->boardversion); spin_lock_init(&dd->pioavail_lock); spin_lock_init(&dd->sendctrl_lock); spin_lock_init(&dd->uctxt_lock); spin_lock_init(&dd->qib_diag_trans_lock); spin_lock_init(&dd->eep_st_lock); mutex_init(&dd->eep_lock); if (qib_mini_init) goto done; ret = init_pioavailregs(dd); init_shadow_tids(dd); qib_get_eeprom_info(dd); /* setup time (don't start yet) to verify we got interrupt */ timer_setup(&dd->intrchk_timer, verify_interrupt, 0); done: return ret; } /** * init_after_reset - re-initialize after a reset * @dd: the qlogic_ib device * * sanity check at least some of the values after reset, and * ensure no receive or transmit (explicitly, in case reset * failed */ static int init_after_reset(struct qib_devdata *dd) { int i; /* * Ensure chip does no sends or receives, tail updates, or * pioavail updates while we re-initialize. This is mostly * for the driver data structures, not chip registers. */ for (i = 0; i < dd->num_pports; ++i) { /* * ctxt == -1 means "all contexts". Only really safe for * _dis_abling things, as here. */ dd->f_rcvctrl(dd->pport + i, QIB_RCVCTRL_CTXT_DIS | QIB_RCVCTRL_INTRAVAIL_DIS | QIB_RCVCTRL_TAILUPD_DIS, -1); /* Redundant across ports for some, but no big deal. */ dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_DIS | QIB_SENDCTRL_AVAIL_DIS); } return 0; } static void enable_chip(struct qib_devdata *dd) { u64 rcvmask; int i; /* * Enable PIO send, and update of PIOavail regs to memory. */ for (i = 0; i < dd->num_pports; ++i) dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_ENB | QIB_SENDCTRL_AVAIL_ENB); /* * Enable kernel ctxts' receive and receive interrupt. * Other ctxts done as user opens and inits them. */ rcvmask = QIB_RCVCTRL_CTXT_ENB | QIB_RCVCTRL_INTRAVAIL_ENB; rcvmask |= (dd->flags & QIB_NODMA_RTAIL) ? QIB_RCVCTRL_TAILUPD_DIS : QIB_RCVCTRL_TAILUPD_ENB; for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) { struct qib_ctxtdata *rcd = dd->rcd[i]; if (rcd) dd->f_rcvctrl(rcd->ppd, rcvmask, i); } } static void verify_interrupt(struct timer_list *t) { struct qib_devdata *dd = from_timer(dd, t, intrchk_timer); u64 int_counter; if (!dd) return; /* being torn down */ /* * If we don't have a lid or any interrupts, let the user know and * don't bother checking again. */ int_counter = qib_int_counter(dd) - dd->z_int_counter; if (int_counter == 0) { if (!dd->f_intr_fallback(dd)) dev_err(&dd->pcidev->dev, "No interrupts detected, not usable.\n"); else /* re-arm the timer to see if fallback works */ mod_timer(&dd->intrchk_timer, jiffies + HZ/2); } } static void init_piobuf_state(struct qib_devdata *dd) { int i, pidx; u32 uctxts; /* * Ensure all buffers are free, and fifos empty. Buffers * are common, so only do once for port 0. * * After enable and qib_chg_pioavailkernel so we can safely * enable pioavail updates and PIOENABLE. After this, packets * are ready and able to go out. */ dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_ALL); for (pidx = 0; pidx < dd->num_pports; ++pidx) dd->f_sendctrl(dd->pport + pidx, QIB_SENDCTRL_FLUSH); /* * If not all sendbufs are used, add the one to each of the lower * numbered contexts. pbufsctxt and lastctxt_piobuf are * calculated in chip-specific code because it may cause some * chip-specific adjustments to be made. */ uctxts = dd->cfgctxts - dd->first_user_ctxt; dd->ctxts_extrabuf = dd->pbufsctxt ? dd->lastctxt_piobuf - (dd->pbufsctxt * uctxts) : 0; /* * Set up the shadow copies of the piobufavail registers, * which we compare against the chip registers for now, and * the in memory DMA'ed copies of the registers. * By now pioavail updates to memory should have occurred, so * copy them into our working/shadow registers; this is in * case something went wrong with abort, but mostly to get the * initial values of the generation bit correct. */ for (i = 0; i < dd->pioavregs; i++) { __le64 tmp; tmp = dd->pioavailregs_dma[i]; /* * Don't need to worry about pioavailkernel here * because we will call qib_chg_pioavailkernel() later * in initialization, to busy out buffers as needed. */ dd->pioavailshadow[i] = le64_to_cpu(tmp); } while (i < ARRAY_SIZE(dd->pioavailshadow)) dd->pioavailshadow[i++] = 0; /* for debugging sanity */ /* after pioavailshadow is setup */ qib_chg_pioavailkernel(dd, 0, dd->piobcnt2k + dd->piobcnt4k, TXCHK_CHG_TYPE_KERN, NULL); dd->f_initvl15_bufs(dd); } /** * qib_create_workqueues - create per port workqueues * @dd: the qlogic_ib device */ static int qib_create_workqueues(struct qib_devdata *dd) { int pidx; struct qib_pportdata *ppd; for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; if (!ppd->qib_wq) { ppd->qib_wq = alloc_ordered_workqueue("qib%d_%d", WQ_MEM_RECLAIM, dd->unit, pidx); if (!ppd->qib_wq) goto wq_error; } } return 0; wq_error: pr_err("create_singlethread_workqueue failed for port %d\n", pidx + 1); for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; if (ppd->qib_wq) { destroy_workqueue(ppd->qib_wq); ppd->qib_wq = NULL; } } return -ENOMEM; } static void qib_free_pportdata(struct qib_pportdata *ppd) { free_percpu(ppd->ibport_data.pmastats); free_percpu(ppd->ibport_data.rvp.rc_acks); free_percpu(ppd->ibport_data.rvp.rc_qacks); free_percpu(ppd->ibport_data.rvp.rc_delayed_comp); ppd->ibport_data.pmastats = NULL; } /** * qib_init - do the actual initialization sequence on the chip * @dd: the qlogic_ib device * @reinit: reinitializing, so don't allocate new memory * * Do the actual initialization sequence on the chip. This is done * both from the init routine called from the PCI infrastructure, and * when we reset the chip, or detect that it was reset internally, * or it's administratively re-enabled. * * Memory allocation here and in called routines is only done in * the first case (reinit == 0). We have to be careful, because even * without memory allocation, we need to re-write all the chip registers * TIDs, etc. after the reset or enable has completed. */ int qib_init(struct qib_devdata *dd, int reinit) { int ret = 0, pidx, lastfail = 0; u32 portok = 0; unsigned i; struct qib_ctxtdata *rcd; struct qib_pportdata *ppd; unsigned long flags; /* Set linkstate to unknown, so we can watch for a transition. */ for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~(QIBL_LINKACTIVE | QIBL_LINKARMED | QIBL_LINKDOWN | QIBL_LINKINIT | QIBL_LINKV); spin_unlock_irqrestore(&ppd->lflags_lock, flags); } if (reinit) ret = init_after_reset(dd); else ret = loadtime_init(dd); if (ret) goto done; /* Bypass most chip-init, to get to device creation */ if (qib_mini_init) return 0; ret = dd->f_late_initreg(dd); if (ret) goto done; /* dd->rcd can be NULL if early init failed */ for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) { /* * Set up the (kernel) rcvhdr queue and egr TIDs. If doing * re-init, the simplest way to handle this is to free * existing, and re-allocate. * Need to re-create rest of ctxt 0 ctxtdata as well. */ rcd = dd->rcd[i]; if (!rcd) continue; lastfail = qib_create_rcvhdrq(dd, rcd); if (!lastfail) lastfail = qib_setup_eagerbufs(rcd); if (lastfail) qib_dev_err(dd, "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n"); } for (pidx = 0; pidx < dd->num_pports; ++pidx) { int mtu; if (lastfail) ret = lastfail; ppd = dd->pport + pidx; mtu = ib_mtu_enum_to_int(qib_ibmtu); if (mtu == -1) { mtu = QIB_DEFAULT_MTU; qib_ibmtu = 0; /* don't leave invalid value */ } /* set max we can ever have for this driver load */ ppd->init_ibmaxlen = min(mtu > 2048 ? dd->piosize4k : dd->piosize2k, dd->rcvegrbufsize + (dd->rcvhdrentsize << 2)); /* * Have to initialize ibmaxlen, but this will normally * change immediately in qib_set_mtu(). */ ppd->ibmaxlen = ppd->init_ibmaxlen; qib_set_mtu(ppd, mtu); spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags |= QIBL_IB_LINK_DISABLED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); lastfail = dd->f_bringup_serdes(ppd); if (lastfail) { qib_devinfo(dd->pcidev, "Failed to bringup IB port %u\n", ppd->port); lastfail = -ENETDOWN; continue; } portok++; } if (!portok) { /* none of the ports initialized */ if (!ret && lastfail) ret = lastfail; else if (!ret) ret = -ENETDOWN; /* but continue on, so we can debug cause */ } enable_chip(dd); init_piobuf_state(dd); done: if (!ret) { /* chip is OK for user apps; mark it as initialized */ for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; /* * Set status even if port serdes is not initialized * so that diags will work. */ *ppd->statusp |= QIB_STATUS_CHIP_PRESENT | QIB_STATUS_INITTED; if (!ppd->link_speed_enabled) continue; if (dd->flags & QIB_HAS_SEND_DMA) ret = qib_setup_sdma(ppd); timer_setup(&ppd->hol_timer, qib_hol_event, 0); ppd->hol_state = QIB_HOL_UP; } /* now we can enable all interrupts from the chip */ dd->f_set_intr_state(dd, 1); /* * Setup to verify we get an interrupt, and fallback * to an alternate if necessary and possible. */ mod_timer(&dd->intrchk_timer, jiffies + HZ/2); /* start stats retrieval timer */ mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); } /* if ret is non-zero, we probably should do some cleanup here... */ return ret; } /* * These next two routines are placeholders in case we don't have per-arch * code for controlling write combining. If explicit control of write * combining is not available, performance will probably be awful. */ int __attribute__((weak)) qib_enable_wc(struct qib_devdata *dd) { return -EOPNOTSUPP; } void __attribute__((weak)) qib_disable_wc(struct qib_devdata *dd) { } struct qib_devdata *qib_lookup(int unit) { return xa_load(&qib_dev_table, unit); } /* * Stop the timers during unit shutdown, or after an error late * in initialization. */ static void qib_stop_timers(struct qib_devdata *dd) { struct qib_pportdata *ppd; int pidx; if (dd->stats_timer.function) del_timer_sync(&dd->stats_timer); if (dd->intrchk_timer.function) del_timer_sync(&dd->intrchk_timer); for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; if (ppd->hol_timer.function) del_timer_sync(&ppd->hol_timer); if (ppd->led_override_timer.function) { del_timer_sync(&ppd->led_override_timer); atomic_set(&ppd->led_override_timer_active, 0); } if (ppd->symerr_clear_timer.function) del_timer_sync(&ppd->symerr_clear_timer); } } /** * qib_shutdown_device - shut down a device * @dd: the qlogic_ib device * * This is called to make the device quiet when we are about to * unload the driver, and also when the device is administratively * disabled. It does not free any data structures. * Everything it does has to be setup again by qib_init(dd, 1) */ static void qib_shutdown_device(struct qib_devdata *dd) { struct qib_pportdata *ppd; unsigned pidx; if (dd->flags & QIB_SHUTDOWN) return; dd->flags |= QIB_SHUTDOWN; for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; spin_lock_irq(&ppd->lflags_lock); ppd->lflags &= ~(QIBL_LINKDOWN | QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE | QIBL_LINKV); spin_unlock_irq(&ppd->lflags_lock); *ppd->statusp &= ~(QIB_STATUS_IB_CONF | QIB_STATUS_IB_READY); } dd->flags &= ~QIB_INITTED; /* mask interrupts, but not errors */ dd->f_set_intr_state(dd, 0); for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; dd->f_rcvctrl(ppd, QIB_RCVCTRL_TAILUPD_DIS | QIB_RCVCTRL_CTXT_DIS | QIB_RCVCTRL_INTRAVAIL_DIS | QIB_RCVCTRL_PKEY_ENB, -1); /* * Gracefully stop all sends allowing any in progress to * trickle out first. */ dd->f_sendctrl(ppd, QIB_SENDCTRL_CLEAR); } /* * Enough for anything that's going to trickle out to have actually * done so. */ udelay(20); for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; dd->f_setextled(ppd, 0); /* make sure LEDs are off */ if (dd->flags & QIB_HAS_SEND_DMA) qib_teardown_sdma(ppd); dd->f_sendctrl(ppd, QIB_SENDCTRL_AVAIL_DIS | QIB_SENDCTRL_SEND_DIS); /* * Clear SerdesEnable. * We can't count on interrupts since we are stopping. */ dd->f_quiet_serdes(ppd); if (ppd->qib_wq) { destroy_workqueue(ppd->qib_wq); ppd->qib_wq = NULL; } qib_free_pportdata(ppd); } } /** * qib_free_ctxtdata - free a context's allocated data * @dd: the qlogic_ib device * @rcd: the ctxtdata structure * * free up any allocated data for a context * This should not touch anything that would affect a simultaneous * re-allocation of context data, because it is called after qib_mutex * is released (and can be called from reinit as well). * It should never change any chip state, or global driver state. */ void qib_free_ctxtdata(struct qib_devdata *dd, struct qib_ctxtdata *rcd) { if (!rcd) return; if (rcd->rcvhdrq) { dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size, rcd->rcvhdrq, rcd->rcvhdrq_phys); rcd->rcvhdrq = NULL; if (rcd->rcvhdrtail_kvaddr) { dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, rcd->rcvhdrtail_kvaddr, rcd->rcvhdrqtailaddr_phys); rcd->rcvhdrtail_kvaddr = NULL; } } if (rcd->rcvegrbuf) { unsigned e; for (e = 0; e < rcd->rcvegrbuf_chunks; e++) { void *base = rcd->rcvegrbuf[e]; size_t size = rcd->rcvegrbuf_size; dma_free_coherent(&dd->pcidev->dev, size, base, rcd->rcvegrbuf_phys[e]); } kfree(rcd->rcvegrbuf); rcd->rcvegrbuf = NULL; kfree(rcd->rcvegrbuf_phys); rcd->rcvegrbuf_phys = NULL; rcd->rcvegrbuf_chunks = 0; } kfree(rcd->tid_pg_list); vfree(rcd->user_event_mask); vfree(rcd->subctxt_uregbase); vfree(rcd->subctxt_rcvegrbuf); vfree(rcd->subctxt_rcvhdr_base); #ifdef CONFIG_DEBUG_FS kfree(rcd->opstats); rcd->opstats = NULL; #endif kfree(rcd); } /* * Perform a PIO buffer bandwidth write test, to verify proper system * configuration. Even when all the setup calls work, occasionally * BIOS or other issues can prevent write combining from working, or * can cause other bandwidth problems to the chip. * * This test simply writes the same buffer over and over again, and * measures close to the peak bandwidth to the chip (not testing * data bandwidth to the wire). On chips that use an address-based * trigger to send packets to the wire, this is easy. On chips that * use a count to trigger, we want to make sure that the packet doesn't * go out on the wire, or trigger flow control checks. */ static void qib_verify_pioperf(struct qib_devdata *dd) { u32 pbnum, cnt, lcnt; u32 __iomem *piobuf; u32 *addr; u64 msecs, emsecs; piobuf = dd->f_getsendbuf(dd->pport, 0ULL, &pbnum); if (!piobuf) { qib_devinfo(dd->pcidev, "No PIObufs for checking perf, skipping\n"); return; } /* * Enough to give us a reasonable test, less than piobuf size, and * likely multiple of store buffer length. */ cnt = 1024; addr = vmalloc(cnt); if (!addr) goto done; preempt_disable(); /* we want reasonably accurate elapsed time */ msecs = 1 + jiffies_to_msecs(jiffies); for (lcnt = 0; lcnt < 10000U; lcnt++) { /* wait until we cross msec boundary */ if (jiffies_to_msecs(jiffies) >= msecs) break; udelay(1); } dd->f_set_armlaunch(dd, 0); /* * length 0, no dwords actually sent */ writeq(0, piobuf); qib_flush_wc(); /* * This is only roughly accurate, since even with preempt we * still take interrupts that could take a while. Running for * >= 5 msec seems to get us "close enough" to accurate values. */ msecs = jiffies_to_msecs(jiffies); for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) { qib_pio_copy(piobuf + 64, addr, cnt >> 2); emsecs = jiffies_to_msecs(jiffies) - msecs; } /* 1 GiB/sec, slightly over IB SDR line rate */ if (lcnt < (emsecs * 1024U)) qib_dev_err(dd, "Performance problem: bandwidth to PIO buffers is only %u MiB/sec\n", lcnt / (u32) emsecs); preempt_enable(); vfree(addr); done: /* disarm piobuf, so it's available again */ dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbnum)); qib_sendbuf_done(dd, pbnum); dd->f_set_armlaunch(dd, 1); } void qib_free_devdata(struct qib_devdata *dd) { unsigned long flags; xa_lock_irqsave(&qib_dev_table, flags); __xa_erase(&qib_dev_table, dd->unit); xa_unlock_irqrestore(&qib_dev_table, flags); #ifdef CONFIG_DEBUG_FS qib_dbg_ibdev_exit(&dd->verbs_dev); #endif free_percpu(dd->int_counter); rvt_dealloc_device(&dd->verbs_dev.rdi); } u64 qib_int_counter(struct qib_devdata *dd) { int cpu; u64 int_counter = 0; for_each_possible_cpu(cpu) int_counter += *per_cpu_ptr(dd->int_counter, cpu); return int_counter; } u64 qib_sps_ints(void) { unsigned long index, flags; struct qib_devdata *dd; u64 sps_ints = 0; xa_lock_irqsave(&qib_dev_table, flags); xa_for_each(&qib_dev_table, index, dd) { sps_ints += qib_int_counter(dd); } xa_unlock_irqrestore(&qib_dev_table, flags); return sps_ints; } /* * Allocate our primary per-unit data structure. Must be done via verbs * allocator, because the verbs cleanup process both does cleanup and * free of the data structure. * "extra" is for chip-specific data. */ struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra) { struct qib_devdata *dd; int ret, nports; /* extra is * number of ports */ nports = extra / sizeof(struct qib_pportdata); dd = (struct qib_devdata *)rvt_alloc_device(sizeof(*dd) + extra, nports); if (!dd) return ERR_PTR(-ENOMEM); ret = xa_alloc_irq(&qib_dev_table, &dd->unit, dd, xa_limit_32b, GFP_KERNEL); if (ret < 0) { qib_early_err(&pdev->dev, "Could not allocate unit ID: error %d\n", -ret); goto bail; } rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s%d", "qib", dd->unit); dd->int_counter = alloc_percpu(u64); if (!dd->int_counter) { ret = -ENOMEM; qib_early_err(&pdev->dev, "Could not allocate per-cpu int_counter\n"); goto bail; } if (!qib_cpulist_count) { u32 count = num_online_cpus(); qib_cpulist = bitmap_zalloc(count, GFP_KERNEL); if (qib_cpulist) qib_cpulist_count = count; } #ifdef CONFIG_DEBUG_FS qib_dbg_ibdev_init(&dd->verbs_dev); #endif return dd; bail: if (!list_empty(&dd->list)) list_del_init(&dd->list); rvt_dealloc_device(&dd->verbs_dev.rdi); return ERR_PTR(ret); } /* * Called from freeze mode handlers, and from PCI error * reporting code. Should be paranoid about state of * system and data structures. */ void qib_disable_after_error(struct qib_devdata *dd) { if (dd->flags & QIB_INITTED) { u32 pidx; dd->flags &= ~QIB_INITTED; if (dd->pport) for (pidx = 0; pidx < dd->num_pports; ++pidx) { struct qib_pportdata *ppd; ppd = dd->pport + pidx; if (dd->flags & QIB_PRESENT) { qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); dd->f_setextled(ppd, 0); } *ppd->statusp &= ~QIB_STATUS_IB_READY; } } /* * Mark as having had an error for driver, and also * for /sys and status word mapped to user programs. * This marks unit as not usable, until reset. */ if (dd->devstatusp) *dd->devstatusp |= QIB_STATUS_HWERROR; } static void qib_remove_one(struct pci_dev *); static int qib_init_one(struct pci_dev *, const struct pci_device_id *); static void qib_shutdown_one(struct pci_dev *); #define DRIVER_LOAD_MSG "Intel " QIB_DRV_NAME " loaded: " #define PFX QIB_DRV_NAME ": " static const struct pci_device_id qib_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_QLOGIC_IB_6120) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7220) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7322) }, { 0, } }; MODULE_DEVICE_TABLE(pci, qib_pci_tbl); static struct pci_driver qib_driver = { .name = QIB_DRV_NAME, .probe = qib_init_one, .remove = qib_remove_one, .shutdown = qib_shutdown_one, .id_table = qib_pci_tbl, .err_handler = &qib_pci_err_handler, }; #ifdef CONFIG_INFINIBAND_QIB_DCA static int qib_notify_dca(struct notifier_block *, unsigned long, void *); static struct notifier_block dca_notifier = { .notifier_call = qib_notify_dca, .next = NULL, .priority = 0 }; static int qib_notify_dca_device(struct device *device, void *data) { struct qib_devdata *dd = dev_get_drvdata(device); unsigned long event = *(unsigned long *)data; return dd->f_notify_dca(dd, event); } static int qib_notify_dca(struct notifier_block *nb, unsigned long event, void *p) { int rval; rval = driver_for_each_device(&qib_driver.driver, NULL, &event, qib_notify_dca_device); return rval ? NOTIFY_BAD : NOTIFY_DONE; } #endif /* * Do all the generic driver unit- and chip-independent memory * allocation and initialization. */ static int __init qib_ib_init(void) { int ret; ret = qib_dev_init(); if (ret) goto bail; /* * These must be called before the driver is registered with * the PCI subsystem. */ #ifdef CONFIG_INFINIBAND_QIB_DCA dca_register_notify(&dca_notifier); #endif #ifdef CONFIG_DEBUG_FS qib_dbg_init(); #endif ret = pci_register_driver(&qib_driver); if (ret < 0) { pr_err("Unable to register driver: error %d\n", -ret); goto bail_dev; } /* not fatal if it doesn't work */ if (qib_init_qibfs()) pr_err("Unable to register ipathfs\n"); goto bail; /* all OK */ bail_dev: #ifdef CONFIG_INFINIBAND_QIB_DCA dca_unregister_notify(&dca_notifier); #endif #ifdef CONFIG_DEBUG_FS qib_dbg_exit(); #endif qib_dev_cleanup(); bail: return ret; } module_init(qib_ib_init); /* * Do the non-unit driver cleanup, memory free, etc. at unload. */ static void __exit qib_ib_cleanup(void) { int ret; ret = qib_exit_qibfs(); if (ret) pr_err( "Unable to cleanup counter filesystem: error %d\n", -ret); #ifdef CONFIG_INFINIBAND_QIB_DCA dca_unregister_notify(&dca_notifier); #endif pci_unregister_driver(&qib_driver); #ifdef CONFIG_DEBUG_FS qib_dbg_exit(); #endif qib_cpulist_count = 0; bitmap_free(qib_cpulist); WARN_ON(!xa_empty(&qib_dev_table)); qib_dev_cleanup(); } module_exit(qib_ib_cleanup); /* this can only be called after a successful initialization */ static void cleanup_device_data(struct qib_devdata *dd) { int ctxt; int pidx; struct qib_ctxtdata **tmp; unsigned long flags; /* users can't do anything more with chip */ for (pidx = 0; pidx < dd->num_pports; ++pidx) { if (dd->pport[pidx].statusp) *dd->pport[pidx].statusp &= ~QIB_STATUS_CHIP_PRESENT; spin_lock(&dd->pport[pidx].cc_shadow_lock); kfree(dd->pport[pidx].congestion_entries); dd->pport[pidx].congestion_entries = NULL; kfree(dd->pport[pidx].ccti_entries); dd->pport[pidx].ccti_entries = NULL; kfree(dd->pport[pidx].ccti_entries_shadow); dd->pport[pidx].ccti_entries_shadow = NULL; kfree(dd->pport[pidx].congestion_entries_shadow); dd->pport[pidx].congestion_entries_shadow = NULL; spin_unlock(&dd->pport[pidx].cc_shadow_lock); } qib_disable_wc(dd); if (dd->pioavailregs_dma) { dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, (void *) dd->pioavailregs_dma, dd->pioavailregs_phys); dd->pioavailregs_dma = NULL; } if (dd->pageshadow) { struct page **tmpp = dd->pageshadow; dma_addr_t *tmpd = dd->physshadow; int i; for (ctxt = 0; ctxt < dd->cfgctxts; ctxt++) { int ctxt_tidbase = ctxt * dd->rcvtidcnt; int maxtid = ctxt_tidbase + dd->rcvtidcnt; for (i = ctxt_tidbase; i < maxtid; i++) { if (!tmpp[i]) continue; dma_unmap_page(&dd->pcidev->dev, tmpd[i], PAGE_SIZE, DMA_FROM_DEVICE); qib_release_user_pages(&tmpp[i], 1); tmpp[i] = NULL; } } dd->pageshadow = NULL; vfree(tmpp); dd->physshadow = NULL; vfree(tmpd); } /* * Free any resources still in use (usually just kernel contexts) * at unload; we do for ctxtcnt, because that's what we allocate. * We acquire lock to be really paranoid that rcd isn't being * accessed from some interrupt-related code (that should not happen, * but best to be sure). */ spin_lock_irqsave(&dd->uctxt_lock, flags); tmp = dd->rcd; dd->rcd = NULL; spin_unlock_irqrestore(&dd->uctxt_lock, flags); for (ctxt = 0; tmp && ctxt < dd->ctxtcnt; ctxt++) { struct qib_ctxtdata *rcd = tmp[ctxt]; tmp[ctxt] = NULL; /* debugging paranoia */ qib_free_ctxtdata(dd, rcd); } kfree(tmp); } /* * Clean up on unit shutdown, or error during unit load after * successful initialization. */ static void qib_postinit_cleanup(struct qib_devdata *dd) { /* * Clean up chip-specific stuff. * We check for NULL here, because it's outside * the kregbase check, and we need to call it * after the free_irq. Thus it's possible that * the function pointers were never initialized. */ if (dd->f_cleanup) dd->f_cleanup(dd); qib_pcie_ddcleanup(dd); cleanup_device_data(dd); qib_free_devdata(dd); } static int qib_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret, j, pidx, initfail; struct qib_devdata *dd = NULL; ret = qib_pcie_init(pdev, ent); if (ret) goto bail; /* * Do device-specific initialiation, function table setup, dd * allocation, etc. */ switch (ent->device) { case PCI_DEVICE_ID_QLOGIC_IB_6120: #ifdef CONFIG_PCI_MSI dd = qib_init_iba6120_funcs(pdev, ent); #else qib_early_err(&pdev->dev, "Intel PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n", ent->device); dd = ERR_PTR(-ENODEV); #endif break; case PCI_DEVICE_ID_QLOGIC_IB_7220: dd = qib_init_iba7220_funcs(pdev, ent); break; case PCI_DEVICE_ID_QLOGIC_IB_7322: dd = qib_init_iba7322_funcs(pdev, ent); break; default: qib_early_err(&pdev->dev, "Failing on unknown Intel deviceid 0x%x\n", ent->device); ret = -ENODEV; } if (IS_ERR(dd)) ret = PTR_ERR(dd); if (ret) goto bail; /* error already printed */ ret = qib_create_workqueues(dd); if (ret) goto bail; /* do the generic initialization */ initfail = qib_init(dd, 0); ret = qib_register_ib_device(dd); /* * Now ready for use. this should be cleared whenever we * detect a reset, or initiate one. If earlier failure, * we still create devices, so diags, etc. can be used * to determine cause of problem. */ if (!qib_mini_init && !initfail && !ret) dd->flags |= QIB_INITTED; j = qib_device_create(dd); if (j) qib_dev_err(dd, "Failed to create /dev devices: %d\n", -j); j = qibfs_add(dd); if (j) qib_dev_err(dd, "Failed filesystem setup for counters: %d\n", -j); if (qib_mini_init || initfail || ret) { qib_stop_timers(dd); flush_workqueue(ib_wq); for (pidx = 0; pidx < dd->num_pports; ++pidx) dd->f_quiet_serdes(dd->pport + pidx); if (qib_mini_init) goto bail; if (!j) { (void) qibfs_remove(dd); qib_device_remove(dd); } if (!ret) qib_unregister_ib_device(dd); qib_postinit_cleanup(dd); if (initfail) ret = initfail; goto bail; } ret = qib_enable_wc(dd); if (ret) { qib_dev_err(dd, "Write combining not enabled (err %d): performance may be poor\n", -ret); ret = 0; } qib_verify_pioperf(dd); bail: return ret; } static void qib_remove_one(struct pci_dev *pdev) { struct qib_devdata *dd = pci_get_drvdata(pdev); int ret; /* unregister from IB core */ qib_unregister_ib_device(dd); /* * Disable the IB link, disable interrupts on the device, * clear dma engines, etc. */ if (!qib_mini_init) qib_shutdown_device(dd); qib_stop_timers(dd); /* wait until all of our (qsfp) queue_work() calls complete */ flush_workqueue(ib_wq); ret = qibfs_remove(dd); if (ret) qib_dev_err(dd, "Failed counters filesystem cleanup: %d\n", -ret); qib_device_remove(dd); qib_postinit_cleanup(dd); } static void qib_shutdown_one(struct pci_dev *pdev) { struct qib_devdata *dd = pci_get_drvdata(pdev); qib_shutdown_device(dd); } /** * qib_create_rcvhdrq - create a receive header queue * @dd: the qlogic_ib device * @rcd: the context data * * This must be contiguous memory (from an i/o perspective), and must be * DMA'able (which means for some systems, it will go through an IOMMU, * or be forced into a low address range). */ int qib_create_rcvhdrq(struct qib_devdata *dd, struct qib_ctxtdata *rcd) { unsigned amt; int old_node_id; if (!rcd->rcvhdrq) { dma_addr_t phys_hdrqtail; amt = ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize * sizeof(u32), PAGE_SIZE); old_node_id = dev_to_node(&dd->pcidev->dev); set_dev_node(&dd->pcidev->dev, rcd->node_id); rcd->rcvhdrq = dma_alloc_coherent(&dd->pcidev->dev, amt, &rcd->rcvhdrq_phys, GFP_KERNEL); set_dev_node(&dd->pcidev->dev, old_node_id); if (!rcd->rcvhdrq) { qib_dev_err(dd, "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n", amt, rcd->ctxt); goto bail; } if (rcd->ctxt >= dd->first_user_ctxt) { rcd->user_event_mask = vmalloc_user(PAGE_SIZE); if (!rcd->user_event_mask) goto bail_free_hdrq; } if (!(dd->flags & QIB_NODMA_RTAIL)) { set_dev_node(&dd->pcidev->dev, rcd->node_id); rcd->rcvhdrtail_kvaddr = dma_alloc_coherent( &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, GFP_KERNEL); set_dev_node(&dd->pcidev->dev, old_node_id); if (!rcd->rcvhdrtail_kvaddr) goto bail_free; rcd->rcvhdrqtailaddr_phys = phys_hdrqtail; } rcd->rcvhdrq_size = amt; } /* clear for security and sanity on each use */ memset(rcd->rcvhdrq, 0, rcd->rcvhdrq_size); if (rcd->rcvhdrtail_kvaddr) memset(rcd->rcvhdrtail_kvaddr, 0, PAGE_SIZE); return 0; bail_free: qib_dev_err(dd, "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n", rcd->ctxt); vfree(rcd->user_event_mask); rcd->user_event_mask = NULL; bail_free_hdrq: dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq, rcd->rcvhdrq_phys); rcd->rcvhdrq = NULL; bail: return -ENOMEM; } /** * qib_setup_eagerbufs - allocate eager buffers, both kernel and user contexts. * @rcd: the context we are setting up. * * Allocate the eager TID buffers and program them into hip. * They are no longer completely contiguous, we do multiple allocation * calls. Otherwise we get the OOM code involved, by asking for too * much per call, with disastrous results on some kernels. */ int qib_setup_eagerbufs(struct qib_ctxtdata *rcd) { struct qib_devdata *dd = rcd->dd; unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff; size_t size; int old_node_id; egrcnt = rcd->rcvegrcnt; egroff = rcd->rcvegr_tid_base; egrsize = dd->rcvegrbufsize; chunk = rcd->rcvegrbuf_chunks; egrperchunk = rcd->rcvegrbufs_perchunk; size = rcd->rcvegrbuf_size; if (!rcd->rcvegrbuf) { rcd->rcvegrbuf = kcalloc_node(chunk, sizeof(rcd->rcvegrbuf[0]), GFP_KERNEL, rcd->node_id); if (!rcd->rcvegrbuf) goto bail; } if (!rcd->rcvegrbuf_phys) { rcd->rcvegrbuf_phys = kmalloc_array_node(chunk, sizeof(rcd->rcvegrbuf_phys[0]), GFP_KERNEL, rcd->node_id); if (!rcd->rcvegrbuf_phys) goto bail_rcvegrbuf; } for (e = 0; e < rcd->rcvegrbuf_chunks; e++) { if (rcd->rcvegrbuf[e]) continue; old_node_id = dev_to_node(&dd->pcidev->dev); set_dev_node(&dd->pcidev->dev, rcd->node_id); rcd->rcvegrbuf[e] = dma_alloc_coherent(&dd->pcidev->dev, size, &rcd->rcvegrbuf_phys[e], GFP_KERNEL); set_dev_node(&dd->pcidev->dev, old_node_id); if (!rcd->rcvegrbuf[e]) goto bail_rcvegrbuf_phys; } rcd->rcvegr_phys = rcd->rcvegrbuf_phys[0]; for (e = chunk = 0; chunk < rcd->rcvegrbuf_chunks; chunk++) { dma_addr_t pa = rcd->rcvegrbuf_phys[chunk]; unsigned i; /* clear for security and sanity on each use */ memset(rcd->rcvegrbuf[chunk], 0, size); for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) { dd->f_put_tid(dd, e + egroff + (u64 __iomem *) ((char __iomem *) dd->kregbase + dd->rcvegrbase), RCVHQ_RCV_TYPE_EAGER, pa); pa += egrsize; } cond_resched(); /* don't hog the cpu */ } return 0; bail_rcvegrbuf_phys: for (e = 0; e < rcd->rcvegrbuf_chunks && rcd->rcvegrbuf[e]; e++) dma_free_coherent(&dd->pcidev->dev, size, rcd->rcvegrbuf[e], rcd->rcvegrbuf_phys[e]); kfree(rcd->rcvegrbuf_phys); rcd->rcvegrbuf_phys = NULL; bail_rcvegrbuf: kfree(rcd->rcvegrbuf); rcd->rcvegrbuf = NULL; bail: return -ENOMEM; } /* * Note: Changes to this routine should be mirrored * for the diagnostics routine qib_remap_ioaddr32(). * There is also related code for VL15 buffers in qib_init_7322_variables(). * The teardown code that unmaps is in qib_pcie_ddcleanup() */ int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen) { u64 __iomem *qib_kregbase = NULL; void __iomem *qib_piobase = NULL; u64 __iomem *qib_userbase = NULL; u64 qib_kreglen; u64 qib_pio2koffset = dd->piobufbase & 0xffffffff; u64 qib_pio4koffset = dd->piobufbase >> 32; u64 qib_pio2klen = dd->piobcnt2k * dd->palign; u64 qib_pio4klen = dd->piobcnt4k * dd->align4k; u64 qib_physaddr = dd->physaddr; u64 qib_piolen; u64 qib_userlen = 0; /* * Free the old mapping because the kernel will try to reuse the * old mapping and not create a new mapping with the * write combining attribute. */ iounmap(dd->kregbase); dd->kregbase = NULL; /* * Assumes chip address space looks like: * - kregs + sregs + cregs + uregs (in any order) * - piobufs (2K and 4K bufs in either order) * or: * - kregs + sregs + cregs (in any order) * - piobufs (2K and 4K bufs in either order) * - uregs */ if (dd->piobcnt4k == 0) { qib_kreglen = qib_pio2koffset; qib_piolen = qib_pio2klen; } else if (qib_pio2koffset < qib_pio4koffset) { qib_kreglen = qib_pio2koffset; qib_piolen = qib_pio4koffset + qib_pio4klen - qib_kreglen; } else { qib_kreglen = qib_pio4koffset; qib_piolen = qib_pio2koffset + qib_pio2klen - qib_kreglen; } qib_piolen += vl15buflen; /* Map just the configured ports (not all hw ports) */ if (dd->uregbase > qib_kreglen) qib_userlen = dd->ureg_align * dd->cfgctxts; /* Sanity checks passed, now create the new mappings */ qib_kregbase = ioremap(qib_physaddr, qib_kreglen); if (!qib_kregbase) goto bail; qib_piobase = ioremap_wc(qib_physaddr + qib_kreglen, qib_piolen); if (!qib_piobase) goto bail_kregbase; if (qib_userlen) { qib_userbase = ioremap(qib_physaddr + dd->uregbase, qib_userlen); if (!qib_userbase) goto bail_piobase; } dd->kregbase = qib_kregbase; dd->kregend = (u64 __iomem *) ((char __iomem *) qib_kregbase + qib_kreglen); dd->piobase = qib_piobase; dd->pio2kbase = (void __iomem *) (((char __iomem *) dd->piobase) + qib_pio2koffset - qib_kreglen); if (dd->piobcnt4k) dd->pio4kbase = (void __iomem *) (((char __iomem *) dd->piobase) + qib_pio4koffset - qib_kreglen); if (qib_userlen) /* ureg will now be accessed relative to dd->userbase */ dd->userbase = qib_userbase; return 0; bail_piobase: iounmap(qib_piobase); bail_kregbase: iounmap(qib_kregbase); bail: return -ENOMEM; }