# SPDX-License-Identifier: GPL-2.0-only # # Pressure drivers # # When adding new entries keep the list in alphabetical order menu "Pressure sensors" config ABP060MG tristate "Honeywell ABP pressure sensor driver" depends on I2C help Say yes here to build support for the Honeywell ABP pressure sensors. To compile this driver as a module, choose M here: the module will be called abp060mg. config ROHM_BM1390 tristate "ROHM BM1390GLV-Z pressure sensor driver" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z can measure pressures ranging from 300 hPa to 1300 hPa with configurable measurement averaging and internal FIFO. The sensor does also provide temperature measurements. config BMP280 tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver" depends on (I2C || SPI_MASTER) select REGMAP select BMP280_I2C if (I2C) select BMP280_SPI if (SPI_MASTER) select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380 and BMP580 pressure and temperature sensors. Also supports the BME280 with an additional humidity sensor channel. To compile this driver as a module, choose M here: the core module will be called bmp280 and you will also get bmp280-i2c for I2C and/or bmp280-spi for SPI support. config BMP280_I2C tristate depends on BMP280 depends on I2C select REGMAP_I2C config BMP280_SPI tristate depends on BMP280 depends on SPI_MASTER select REGMAP config IIO_CROS_EC_BARO tristate "ChromeOS EC Barometer Sensor" depends on IIO_CROS_EC_SENSORS_CORE help Say yes here to build support for the Barometer sensor when presented by the ChromeOS EC Sensor hub. To compile this driver as a module, choose M here: the module will be called cros_ec_baro. config DLHL60D tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for the All Sensors DLH series pressure sensors driver. To compile this driver as a module, choose M here: the module will be called dlhl60d. config DPS310 tristate "Infineon DPS310 pressure and temperature sensor" depends on I2C select REGMAP_I2C help Support for the Infineon DPS310 digital barometric pressure sensor. It can be accessed over I2C bus. This driver can also be built as a module. If so, the module will be called dps310. config HID_SENSOR_PRESS depends on HID_SENSOR_HUB select IIO_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID PRESS" help Say yes here to build support for the HID SENSOR Pressure driver To compile this driver as a module, choose M here: the module will be called hid-sensor-press. config HP03 tristate "Hope RF HP03 temperature and pressure sensor driver" depends on I2C select REGMAP_I2C help Say yes here to build support for Hope RF HP03 pressure and temperature sensor. To compile this driver as a module, choose M here: the module will be called hp03. config HSC030PA tristate "Honeywell HSC/SSC TruStability pressure sensor series" depends on (I2C || SPI_MASTER) select HSC030PA_I2C if I2C select HSC030PA_SPI if SPI_MASTER select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Honeywell TruStability HSC and SSC pressure and temperature sensor series. To compile this driver as a module, choose M here: the module will be called hsc030pa. config HSC030PA_I2C tristate depends on HSC030PA depends on I2C config HSC030PA_SPI tristate depends on HSC030PA depends on SPI_MASTER config ICP10100 tristate "InvenSense ICP-101xx pressure and temperature sensor" depends on I2C select CRC8 help Say yes here to build support for InvenSense ICP-101xx barometric pressure and temperature sensor. To compile this driver as a module, choose M here: the module will be called icp10100. config MPL115 tristate config MPL115_I2C tristate "Freescale MPL115A2 pressure sensor driver" depends on I2C select MPL115 help Say yes here to build support for the Freescale MPL115A2 pressure sensor connected via I2C. To compile this driver as a module, choose M here: the module will be called mpl115_i2c. config MPL115_SPI tristate "Freescale MPL115A1 pressure sensor driver" depends on SPI_MASTER select MPL115 help Say yes here to build support for the Freescale MPL115A1 pressure sensor connected via SPI. To compile this driver as a module, choose M here: the module will be called mpl115_spi. config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for the Freescale MPL3115A2 pressure sensor / altimeter. To compile this driver as a module, choose M here: the module will be called mpl3115. config MPRLS0025PA tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)" depends on (I2C || SPI_MASTER) select MPRLS0025PA_I2C if I2C select MPRLS0025PA_SPI if SPI_MASTER select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Honeywell MicroPressure pressure sensor series. There are many different types with different pressure range. These ranges can be set up in the device tree. To compile this driver as a module, choose M here: the module will be called mprls0025pa. config MPRLS0025PA_I2C tristate depends on MPRLS0025PA depends on I2C config MPRLS0025PA_SPI tristate depends on MPRLS0025PA depends on SPI_MASTER config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Measurement Specialties MS5611, MS5607 pressure and temperature sensors. To compile this driver as a module, choose M here: the module will be called ms5611_core. config MS5611_I2C tristate "support I2C bus connection" depends on I2C && MS5611 help Say Y here to build I2C bus support for MS5611. To compile this driver as a module, choose M here: the module will be called ms5611_i2c. config MS5611_SPI tristate "support SPI bus connection" depends on SPI_MASTER && MS5611 help Say Y here to build SPI bus support for MS5611. To compile this driver as a module, choose M here: the module will be called ms5611_spi. config MS5637 tristate "Measurement Specialties MS5637 pressure & temperature sensor" depends on I2C select IIO_MS_SENSORS_I2C help If you say yes here you get support for the Measurement Specialties MS5637 pressure and temperature sensor. This driver is also used for MS8607 temperature, pressure & humidity sensor This driver can also be built as a module. If so, the module will be called ms5637. config SDP500 tristate "Sensirion SDP500 differential pressure sensor I2C driver" depends on I2C select CRC8 help Say Y here to build support for Sensirion SDP500 differential pressure sensor I2C driver. To compile this driver as a module, choose M here: the core module will be called sdp500. config IIO_ST_PRESS tristate "STMicroelectronics pressure sensor Driver" depends on (I2C || SPI_MASTER) && SYSFS select IIO_ST_SENSORS_CORE select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics pressure sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. Also need to enable at least one of I2C and SPI interface drivers below. config IIO_ST_PRESS_I2C tristate "STMicroelectronics pressure sensor I2C Interface" depends on I2C && IIO_ST_PRESS default I2C && IIO_ST_PRESS select IIO_ST_SENSORS_I2C help Build support for STMicroelectronics pressure sensor I2C interface. To compile this driver as a module, choose M here. The module will be called st_pressure_i2c. config IIO_ST_PRESS_SPI tristate "STMicroelectronics pressure sensor SPI Interface" depends on SPI_MASTER && IIO_ST_PRESS default SPI_MASTER && IIO_ST_PRESS select IIO_ST_SENSORS_SPI help Build support for STMicroelectronics pressure sensor SPI interface. To compile this driver as a module, choose M here. The module will be called st_pressure_spi. config T5403 tristate "EPCOS T5403 digital barometric pressure sensor driver" depends on I2C help Say yes here to build support for the EPCOS T5403 pressure sensor connected via I2C. To compile this driver as a module, choose M here: the module will be called t5403. config HP206C tristate "HOPERF HP206C precision barometer and altimeter sensor" depends on I2C help Say yes here to build support for the HOPREF HP206C precision barometer and altimeter sensor. This driver can also be built as a module. If so, the module will be called hp206c. config ZPA2326 tristate "Murata ZPA2326 pressure sensor driver" select IIO_BUFFER select IIO_TRIGGERED_BUFFER select REGMAP select ZPA2326_I2C if I2C select ZPA2326_SPI if SPI_MASTER help Say Y here to build support for the Murata ZPA2326 pressure and temperature sensor. To compile this driver as a module, choose M here: the module will be called zpa2326. config ZPA2326_I2C tristate select REGMAP_I2C config ZPA2326_SPI tristate select REGMAP_SPI endmenu