// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2017 Axis Communications AB * * Driver for Texas Instruments' ADC084S021 ADC chip. * Datasheets can be found here: * https://www.ti.com/lit/ds/symlink/adc084s021.pdf */ #include #include #include #include #include #include #include #include #include #include #define ADC084S021_DRIVER_NAME "adc084s021" struct adc084s021 { struct spi_device *spi; struct spi_message message; struct spi_transfer spi_trans; struct regulator *reg; struct mutex lock; /* Buffer used to align data */ struct { __be16 channels[4]; s64 ts __aligned(8); } scan; /* * DMA (thus cache coherency maintenance) may require the * transfer buffers to live in their own cache line. */ u16 tx_buf[4] __aligned(IIO_DMA_MINALIGN); __be16 rx_buf[5]; /* First 16-bits are trash */ }; #define ADC084S021_VOLTAGE_CHANNEL(num) \ { \ .type = IIO_VOLTAGE, \ .channel = (num), \ .indexed = 1, \ .scan_index = (num), \ .scan_type = { \ .sign = 'u', \ .realbits = 8, \ .storagebits = 16, \ .shift = 4, \ .endianness = IIO_BE, \ }, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ } static const struct iio_chan_spec adc084s021_channels[] = { ADC084S021_VOLTAGE_CHANNEL(0), ADC084S021_VOLTAGE_CHANNEL(1), ADC084S021_VOLTAGE_CHANNEL(2), ADC084S021_VOLTAGE_CHANNEL(3), IIO_CHAN_SOFT_TIMESTAMP(4), }; /** * adc084s021_adc_conversion() - Read an ADC channel and return its value. * * @adc: The ADC SPI data. * @data: Buffer for converted data. */ static int adc084s021_adc_conversion(struct adc084s021 *adc, __be16 *data) { int n_words = (adc->spi_trans.len >> 1) - 1; /* Discard first word */ int ret, i = 0; /* Do the transfer */ ret = spi_sync(adc->spi, &adc->message); if (ret < 0) return ret; for (; i < n_words; i++) *(data + i) = adc->rx_buf[i + 1]; return ret; } static int adc084s021_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *channel, int *val, int *val2, long mask) { struct adc084s021 *adc = iio_priv(indio_dev); int ret; __be16 be_val; switch (mask) { case IIO_CHAN_INFO_RAW: ret = iio_device_claim_direct_mode(indio_dev); if (ret < 0) return ret; ret = regulator_enable(adc->reg); if (ret) { iio_device_release_direct_mode(indio_dev); return ret; } adc->tx_buf[0] = channel->channel << 3; ret = adc084s021_adc_conversion(adc, &be_val); iio_device_release_direct_mode(indio_dev); regulator_disable(adc->reg); if (ret < 0) return ret; *val = be16_to_cpu(be_val); *val = (*val >> channel->scan_type.shift) & 0xff; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: ret = regulator_enable(adc->reg); if (ret) return ret; ret = regulator_get_voltage(adc->reg); regulator_disable(adc->reg); if (ret < 0) return ret; *val = ret / 1000; return IIO_VAL_INT; default: return -EINVAL; } } /** * adc084s021_buffer_trigger_handler() - Read ADC channels and push to buffer. * * @irq: The interrupt number (not used). * @pollfunc: Pointer to the poll func. */ static irqreturn_t adc084s021_buffer_trigger_handler(int irq, void *pollfunc) { struct iio_poll_func *pf = pollfunc; struct iio_dev *indio_dev = pf->indio_dev; struct adc084s021 *adc = iio_priv(indio_dev); mutex_lock(&adc->lock); if (adc084s021_adc_conversion(adc, adc->scan.channels) < 0) dev_err(&adc->spi->dev, "Failed to read data\n"); iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan, iio_get_time_ns(indio_dev)); mutex_unlock(&adc->lock); iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; } static int adc084s021_buffer_preenable(struct iio_dev *indio_dev) { struct adc084s021 *adc = iio_priv(indio_dev); int scan_index; int i = 0; iio_for_each_active_channel(indio_dev, scan_index) { const struct iio_chan_spec *channel = &indio_dev->channels[scan_index]; adc->tx_buf[i++] = channel->channel << 3; } adc->spi_trans.len = 2 + (i * sizeof(__be16)); /* Trash + channels */ return regulator_enable(adc->reg); } static int adc084s021_buffer_postdisable(struct iio_dev *indio_dev) { struct adc084s021 *adc = iio_priv(indio_dev); adc->spi_trans.len = 4; /* Trash + single channel */ return regulator_disable(adc->reg); } static const struct iio_info adc084s021_info = { .read_raw = adc084s021_read_raw, }; static const struct iio_buffer_setup_ops adc084s021_buffer_setup_ops = { .preenable = adc084s021_buffer_preenable, .postdisable = adc084s021_buffer_postdisable, }; static int adc084s021_probe(struct spi_device *spi) { struct iio_dev *indio_dev; struct adc084s021 *adc; int ret; indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); if (!indio_dev) { dev_err(&spi->dev, "Failed to allocate IIO device\n"); return -ENOMEM; } adc = iio_priv(indio_dev); adc->spi = spi; /* Initiate the Industrial I/O device */ indio_dev->name = spi_get_device_id(spi)->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &adc084s021_info; indio_dev->channels = adc084s021_channels; indio_dev->num_channels = ARRAY_SIZE(adc084s021_channels); /* Create SPI transfer for channel reads */ adc->spi_trans.tx_buf = adc->tx_buf; adc->spi_trans.rx_buf = adc->rx_buf; adc->spi_trans.len = 4; /* Trash + single channel */ spi_message_init_with_transfers(&adc->message, &adc->spi_trans, 1); adc->reg = devm_regulator_get(&spi->dev, "vref"); if (IS_ERR(adc->reg)) return PTR_ERR(adc->reg); mutex_init(&adc->lock); /* Setup triggered buffer with pollfunction */ ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL, adc084s021_buffer_trigger_handler, &adc084s021_buffer_setup_ops); if (ret) { dev_err(&spi->dev, "Failed to setup triggered buffer\n"); return ret; } return devm_iio_device_register(&spi->dev, indio_dev); } static const struct of_device_id adc084s021_of_match[] = { { .compatible = "ti,adc084s021", }, { } }; MODULE_DEVICE_TABLE(of, adc084s021_of_match); static const struct spi_device_id adc084s021_id[] = { { ADC084S021_DRIVER_NAME, 0 }, { } }; MODULE_DEVICE_TABLE(spi, adc084s021_id); static struct spi_driver adc084s021_driver = { .driver = { .name = ADC084S021_DRIVER_NAME, .of_match_table = adc084s021_of_match, }, .probe = adc084s021_probe, .id_table = adc084s021_id, }; module_spi_driver(adc084s021_driver); MODULE_AUTHOR("Mårten Lindahl "); MODULE_DESCRIPTION("Texas Instruments ADC084S021"); MODULE_LICENSE("GPL v2"); MODULE_VERSION("1.0");