/* * Copyright (C) 2012 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Armada 510 (aka Dove) variant support */ #include #include #include #include #include "armada_crtc.h" #include "armada_drm.h" #include "armada_hw.h" static int armada510_crtc_init(struct armada_crtc *dcrtc, struct device *dev) { struct clk *clk; clk = devm_clk_get(dev, "ext_ref_clk_1"); if (IS_ERR(clk)) return PTR_ERR(clk) == -ENOENT ? -EPROBE_DEFER : PTR_ERR(clk); dcrtc->extclk[0] = clk; /* Lower the watermark so to eliminate jitter at higher bandwidths */ armada_updatel(0x20, (1 << 11) | 0xff, dcrtc->base + LCD_CFG_RDREG4F); return 0; } /* * Armada510 specific SCLK register selection. * This gets called with sclk = NULL to test whether the mode is * supportable, and again with sclk != NULL to set the clocks up for * that. The former can return an error, but the latter is expected * not to. * * We currently are pretty rudimentary here, always selecting * EXT_REF_CLK_1 for LCD0 and erroring LCD1. This needs improvement! */ static int armada510_crtc_compute_clock(struct armada_crtc *dcrtc, const struct drm_display_mode *mode, uint32_t *sclk) { struct clk *clk = dcrtc->extclk[0]; int ret; if (dcrtc->num == 1) return -EINVAL; if (IS_ERR(clk)) return PTR_ERR(clk); if (dcrtc->clk != clk) { ret = clk_prepare_enable(clk); if (ret) return ret; dcrtc->clk = clk; } if (sclk) { uint32_t rate, ref, div; rate = mode->clock * 1000; ref = clk_round_rate(clk, rate); div = DIV_ROUND_UP(ref, rate); if (div < 1) div = 1; clk_set_rate(clk, ref); *sclk = div | SCLK_510_EXTCLK1; } return 0; } const struct armada_variant armada510_ops = { .has_spu_adv_reg = true, .spu_adv_reg = ADV_HWC32ENABLE | ADV_HWC32ARGB | ADV_HWC32BLEND, .init = armada510_crtc_init, .compute_clock = armada510_crtc_compute_clock, };