/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright IBM Corp. 1999, 2010 * * Author(s): Hartmut Penner * Martin Schwidefsky * Rob van der Heij * * There are 5 different IPL methods * 1) load the image directly into ram at address 0 and do an PSW restart * 2) linload will load the image from address 0x10000 to memory 0x10000 * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated) * 3) generate the tape ipl header, store the generated image on a tape * and ipl from it * In case of SL tape you need to IPL 5 times to get past VOL1 etc * 4) generate the vm reader ipl header, move the generated image to the * VM reader (use option NOH!) and do a ipl from reader (VM only) * 5) direct call of start by the SALIPL loader * We use the cpuid to distinguish between VM and native ipl * params for kernel are pushed to 0x10400 (see setup.h) * */ #include #include #include #include #include #include #include "boot.h" #define EP_OFFSET 0x10008 #define EP_STRING "S390EP" #define IPL_BS 0x730 __HEAD ipl_start: mvi __LC_AR_MODE_ID,1 # set esame flag slr %r0,%r0 # set cpuid to zero lhi %r1,2 # mode 2 = esame (dump) sigp %r1,%r0,0x12 # switch to esame mode sam64 # switch to 64 bit addressing mode lgh %r1,__LC_SUBCHANNEL_ID # test if subchannel number brctg %r1,.Lnoload # is valid llgf %r1,__LC_SUBCHANNEL_ID # load ipl subchannel number lghi %r2,IPL_BS # load start address bras %r14,.Lloader # load rest of ipl image larl %r12,parmarea # pointer to parameter area stg %r1,IPL_DEVICE-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: larl %r2,_end # ramdisk loc. is temp bras %r14,.Lloader # load parameter file ltgr %r2,%r2 # got anything ? jz .Lnopf lg %r3,MAX_COMMAND_LINE_SIZE-PARMAREA(%r12) aghi %r3,-1 clgr %r2,%r3 jl .Lnotrunc lgr %r2,%r3 .Lnotrunc: larl %r4,_end larl %r13,.L_hdr clc 0(3,%r4),0(%r13) # if it is HDRx jz .Lagain1 # skip dataset header larl %r13,.L_eof clc 0(3,%r4),0(%r13) # if it is EOFx jz .Lagain1 # skip data set trailer lgr %r5,%r2 la %r6,COMMAND_LINE-PARMAREA(%r12) lgr %r7,%r2 aghi %r7,1 mvcl %r6,%r4 .Lnopf: # # load ramdisk from ipl device # .Lagain2: larl %r2,_end # addr of ramdisk stg %r2,INITRD_START-PARMAREA(%r12) bras %r14,.Lloader # load ramdisk stg %r2,INITRD_SIZE-PARMAREA(%r12) # store size of rd ltgr %r2,%r2 jnz .Lrdcont stg %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found .Lrdcont: larl %r2,_end larl %r13,.L_hdr # skip HDRx and EOFx clc 0(3,%r2),0(%r13) jz .Lagain2 larl %r13,.L_eof clc 0(3,%r2),0(%r13) jz .Lagain2 # # reset files in VM reader # larl %r13,.Lcpuid stidp 0(%r13) # store cpuid tm 0(%r13),0xff # running VM ? jno .Lnoreset larl %r2,.Lreset lghi %r3,26 diag %r2,%r3,8 larl %r5,.Lirb stsch 0(%r5) # check if irq is pending tm 30(%r5),0x0f # by verifying if any of the jnz .Lwaitforirq # activity or status control tm 31(%r5),0xff # bits is set in the schib jz .Lnoreset .Lwaitforirq: bras %r14,.Lirqwait # wait for IO interrupt c %r1,__LC_SUBCHANNEL_ID # compare subchannel number jne .Lwaitforirq larl %r5,.Lirb tsch 0(%r5) .Lnoreset: j .Lnoload # # everything loaded, go for it # .Lnoload: jg startup # # subroutine to wait for end I/O # .Lirqwait: larl %r13,.Lnewpswmask # set up IO interrupt psw mvc __LC_IO_NEW_PSW(8),0(%r13) stg %r14,__LC_IO_NEW_PSW+8 larl %r13,.Lwaitpsw lpswe 0(%r13) .Lioint: # # subroutine for loading cards from the reader # .Lloader: lgr %r4,%r14 larl %r3,.Lorb # r2 = address of orb into r2 larl %r5,.Lirb # r4 = address of irb larl %r6,.Lccws lghi %r7,20 .Linit: st %r2,4(%r6) # initialize CCW data addresses la %r2,0x50(%r2) la %r6,8(%r6) brctg %r7,.Linit larl %r13,.Lcr6 lctlg %c6,%c6,0(%r13) xgr %r2,%r2 .Lldlp: ssch 0(%r3) # load chunk of 1600 bytes jnz .Llderr .Lwait4irq: bras %r14,.Lirqwait c %r1,__LC_SUBCHANNEL_ID # compare subchannel number jne .Lwait4irq tsch 0(%r5) xgr %r0,%r0 ic %r0,8(%r5) # get device status cghi %r0,8 # channel end ? je .Lcont cghi %r0,12 # channel end + device end ? je .Lcont llgf %r0,4(%r5) sgf %r0,8(%r3) # r0/8 = number of ccws executed mghi %r0,10 # *10 = number of bytes in ccws llgh %r3,10(%r5) # get residual count sgr %r0,%r3 # #ccws*80-residual=#bytes read agr %r2,%r0 br %r4 # r2 contains the total size .Lcont: aghi %r2,0x640 # add 0x640 to total size larl %r6,.Lccws lghi %r7,20 .Lincr: l %r0,4(%r6) # update CCW data addresses aghi %r0,0x640 st %r0,4(%r6) aghi %r6,8 brctg %r7,.Lincr j .Lldlp .Llderr: larl %r13,.Lcrash lpsw 0(%r13) .balign 8 .Lwaitpsw: .quad 0x0202000180000000,.Lioint .Lnewpswmask: .quad 0x0000000180000000 .balign 8 .Lorb: .long 0x00000000,0x0080ff00,.Lccws .Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 .balign 8 .Lcr6: .quad 0x00000000ff000000 .balign 8 .Lcrash:.long 0x000a0000,0x00000000 .balign 8 .Lccws: .rept 19 .long 0x02600050,0x00000000 .endr .long 0x02200050,0x00000000 .Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" .L_eof: .long 0xc5d6c600 /* C'EOF' */ .L_hdr: .long 0xc8c4d900 /* C'HDR' */ .balign 8 .Lcpuid:.fill 8,1,0 # # normal startup-code, running in absolute addressing mode # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # .org STARTUP_NORMAL_OFFSET - IPL_START SYM_CODE_START(startup) j startup_normal .org EP_OFFSET - IPL_START # # This is a list of s390 kernel entry points. At address 0x1000f the number of # valid entry points is stored. # # IMPORTANT: Do not change this table, it is s390 kernel ABI! # .ascii EP_STRING .byte 0x00,0x01 # # kdump startup-code, running in 64 bit absolute addressing mode # .org STARTUP_KDUMP_OFFSET - IPL_START j startup_kdump SYM_CODE_END(startup) SYM_CODE_START_LOCAL(startup_normal) mvi __LC_AR_MODE_ID,1 # set esame flag slr %r0,%r0 # set cpuid to zero lhi %r1,2 # mode 2 = esame (dump) sigp %r1,%r0,0x12 # switch to esame mode bras %r13,0f .fill 16,4,0x0 0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs sam64 # switch to 64 bit addressing mode larl %r13,.Lext_new_psw mvc __LC_EXT_NEW_PSW(16),0(%r13) larl %r13,.Lpgm_new_psw mvc __LC_PGM_NEW_PSW(16),0(%r13) larl %r13,.Lio_new_psw mvc __LC_IO_NEW_PSW(16),0(%r13) xc 0x200(256),0x200 # partially clear lowcore xc 0x300(256),0x300 xc 0xe00(256),0xe00 xc 0xf00(256),0xf00 larl %r13,.Lctl lctlg %c0,%c15,0(%r13) # load control registers stcke __LC_BOOT_CLOCK mvc __LC_LAST_UPDATE_CLOCK(8),__LC_BOOT_CLOCK+1 larl %r13,6f spt 0(%r13) mvc __LC_LAST_UPDATE_TIMER(8),0(%r13) larl %r15,_stack_end-STACK_FRAME_OVERHEAD brasl %r14,sclp_early_setup_buffer brasl %r14,verify_facilities brasl %r14,startup_kernel SYM_CODE_END(startup_normal) .balign 8 6: .long 0x7fffffff,0xffffffff .Lext_new_psw: .quad 0x0002000180000000,0x1b0 # disabled wait .Lpgm_new_psw: .quad 0x0000000180000000,startup_pgm_check_handler .Lio_new_psw: .quad 0x0002000180000000,0x1f0 # disabled wait .Lctl: .quad 0x04040000 # cr0: AFP registers & secondary space .quad 0 # cr1: primary space segment table .quad 0 # cr2: dispatchable unit control table .quad 0 # cr3: instruction authorization .quad 0xffff # cr4: instruction authorization .quad 0 # cr5: primary-aste origin .quad 0 # cr6: I/O interrupts .quad 0 # cr7: secondary space segment table .quad 0x0000000000008000 # cr8: access registers translation .quad 0 # cr9: tracing off .quad 0 # cr10: tracing off .quad 0 # cr11: tracing off .quad 0 # cr12: tracing off .quad 0 # cr13: home space segment table .quad 0xc0000000 # cr14: machine check handling off .quad 0 # cr15: linkage stack operations #include "head_kdump.S" # # This program check is active immediately after kernel start # and until early_pgm_check_handler is set in kernel/early.c # It simply saves general/control registers and psw in # the save area and does disabled wait with a faulty address. # SYM_CODE_START_LOCAL(startup_pgm_check_handler) stmg %r8,%r15,__LC_SAVE_AREA la %r8,4095 stctg %c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r8) stmg %r0,%r7,__LC_GPREGS_SAVE_AREA-4095(%r8) mvc __LC_GPREGS_SAVE_AREA-4095+64(64,%r8),__LC_SAVE_AREA mvc __LC_PSW_SAVE_AREA-4095(16,%r8),__LC_PGM_OLD_PSW mvc __LC_RETURN_PSW(16),__LC_PGM_OLD_PSW ni __LC_RETURN_PSW,0xfc # remove IO and EX bits ni __LC_RETURN_PSW+1,0xfb # remove MCHK bit oi __LC_RETURN_PSW+1,0x2 # set wait state bit larl %r9,.Lold_psw_disabled_wait stg %r9,__LC_PGM_NEW_PSW+8 larl %r15,_dump_info_stack_end-STACK_FRAME_OVERHEAD brasl %r14,print_pgm_check_info .Lold_psw_disabled_wait: la %r8,4095 lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r8) lpswe __LC_RETURN_PSW # disabled wait SYM_CODE_END(startup_pgm_check_handler)