/* * Copyright (C) 2004 Paul Mackerras , IBM * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ struct pt_regs; /* * We don't allow single-stepping an mtmsrd that would clear * MSR_RI, since that would make the exception unrecoverable. * Since we need to single-step to proceed from a breakpoint, * we don't allow putting a breakpoint on an mtmsrd instruction. * Similarly we don't allow breakpoints on rfid instructions. * These macros tell us if an instruction is a mtmsrd or rfid. * Note that IS_MTMSRD returns true for both an mtmsr (32-bit) * and an mtmsrd (64-bit). */ #define IS_MTMSRD(instr) (((instr) & 0xfc0007be) == 0x7c000124) #define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024) #define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064) enum instruction_type { COMPUTE, /* arith/logical/CR op, etc. */ LOAD, /* load and store types need to be contiguous */ LOAD_MULTI, LOAD_FP, LOAD_VMX, LOAD_VSX, STORE, STORE_MULTI, STORE_FP, STORE_VMX, STORE_VSX, LARX, STCX, BRANCH, MFSPR, MTSPR, CACHEOP, BARRIER, SYSCALL, MFMSR, MTMSR, RFI, INTERRUPT, UNKNOWN }; #define INSTR_TYPE_MASK 0x1f #define OP_IS_LOAD_STORE(type) (LOAD <= (type) && (type) <= STCX) /* Compute flags, ORed in with type */ #define SETREG 0x20 #define SETCC 0x40 #define SETXER 0x80 /* Branch flags, ORed in with type */ #define SETLK 0x20 #define BRTAKEN 0x40 #define DECCTR 0x80 /* Load/store flags, ORed in with type */ #define SIGNEXT 0x20 #define UPDATE 0x40 /* matches bit in opcode 31 instructions */ #define BYTEREV 0x80 /* Barrier type field, ORed in with type */ #define BARRIER_MASK 0xe0 #define BARRIER_SYNC 0x00 #define BARRIER_ISYNC 0x20 #define BARRIER_EIEIO 0x40 #define BARRIER_LWSYNC 0x60 #define BARRIER_PTESYNC 0x80 /* Cacheop values, ORed in with type */ #define CACHEOP_MASK 0x700 #define DCBST 0 #define DCBF 0x100 #define DCBTST 0x200 #define DCBT 0x300 #define ICBI 0x400 #define DCBZ 0x500 /* VSX flags values */ #define VSX_FPCONV 1 /* do floating point SP/DP conversion */ #define VSX_SPLAT 2 /* store loaded value into all elements */ #define VSX_LDLEFT 4 /* load VSX register from left */ #define VSX_CHECK_VEC 8 /* check MSR_VEC not MSR_VSX for reg >= 32 */ /* Size field in type word */ #define SIZE(n) ((n) << 8) #define GETSIZE(w) ((w) >> 8) #define MKOP(t, f, s) ((t) | (f) | SIZE(s)) struct instruction_op { int type; int reg; unsigned long val; /* For LOAD/STORE/LARX/STCX */ unsigned long ea; int update_reg; /* For MFSPR */ int spr; u32 ccval; u32 xerval; u8 element_size; /* for VSX/VMX loads/stores */ u8 vsx_flags; }; union vsx_reg { u8 b[16]; u16 h[8]; u32 w[4]; unsigned long d[2]; float fp[4]; double dp[2]; __vector128 v; }; /* * Decode an instruction, and return information about it in *op * without changing *regs. * * Return value is 1 if the instruction can be emulated just by * updating *regs with the information in *op, -1 if we need the * GPRs but *regs doesn't contain the full register set, or 0 * otherwise. */ extern int analyse_instr(struct instruction_op *op, const struct pt_regs *regs, unsigned int instr); /* * Emulate an instruction that can be executed just by updating * fields in *regs. */ void emulate_update_regs(struct pt_regs *reg, struct instruction_op *op); /* * Emulate instructions that cause a transfer of control, * arithmetic/logical instructions, loads and stores, * cache operations and barriers. * * Returns 1 if the instruction was emulated successfully, * 0 if it could not be emulated, or -1 for an instruction that * should not be emulated (rfid, mtmsrd clearing MSR_RI, etc.). */ extern int emulate_step(struct pt_regs *regs, unsigned int instr); extern void emulate_vsx_load(struct instruction_op *op, union vsx_reg *reg, const void *mem, bool cross_endian); extern void emulate_vsx_store(struct instruction_op *op, const union vsx_reg *reg, void *mem, bool cross_endian); extern int emulate_dcbz(unsigned long ea, struct pt_regs *regs);