// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree file for the J722S EVM * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ * * Schematics: https://www.ti.com/lit/zip/sprr495 */ /dts-v1/; #include #include #include "k3-j722s.dtsi" #include "k3-serdes.h" / { compatible = "ti,j722s-evm", "ti,j722s"; model = "Texas Instruments J722S EVM"; aliases { serial0 = &wkup_uart0; serial2 = &main_uart0; serial3 = &main_uart5; mmc0 = &sdhci0; mmc1 = &sdhci1; }; chosen { stdout-path = &main_uart0; }; memory@80000000 { /* 8G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000001 0x80000000>; device_type = "memory"; bootph-pre-ram; }; reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; no-map; }; secure_ddr: optee@9e800000 { reg = <0x00 0x9e800000 0x00 0x01800000>; no-map; }; wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0000000 0x00 0x100000>; no-map; }; wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1000000 0x00 0x100000>; no-map; }; mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa1100000 0x00 0xf00000>; no-map; }; main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2000000 0x00 0x100000>; no-map; }; main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa2100000 0x00 0xf00000>; no-map; }; c7x_0_dma_memory_region: c7x-dma-memory@a3000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3000000 0x00 0x100000>; no-map; }; c7x_0_memory_region: c7x-memory@a3100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa3100000 0x00 0xf00000>; no-map; }; c7x_1_dma_memory_region: c7x-dma-memory@a4000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4000000 0x00 0x100000>; no-map; }; c7x_1_memory_region: c7x-memory@a4100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; rtos_ipc_memory_region: ipc-memories@a5000000 { reg = <0x00 0xa5000000 0x00 0x1c00000>; alignment = <0x1000>; no-map; }; }; vmain_pd: regulator-0 { /* TPS65988 PD CONTROLLER OUTPUT */ compatible = "regulator-fixed"; regulator-name = "vmain_pd"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; bootph-all; }; vsys_5v0: regulator-vsys5v0 { /* Output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vmain_pd>; regulator-always-on; regulator-boot-on; }; vdd_mmc1: regulator-mmc1 { /* TPS22918DBVR */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; enable-active-high; gpio = <&exp1 15 GPIO_ACTIVE_HIGH>; bootph-all; }; vdd_sd_dv: regulator-TLV71033 { compatible = "regulator-gpio"; regulator-name = "tlv71033"; pinctrl-names = "default"; pinctrl-0 = <&vdd_sd_dv_pins_default>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; vin-supply = <&vsys_5v0>; gpios = <&main_gpio0 70 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; }; vsys_io_3v3: regulator-vsys-io-3v3 { compatible = "regulator-fixed"; regulator-name = "vsys_io_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; }; vsys_io_1v8: regulator-vsys-io-1v8 { compatible = "regulator-fixed"; regulator-name = "vsys_io_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; vsys_io_1v2: regulator-vsys-io-1v2 { compatible = "regulator-fixed"; regulator-name = "vsys_io_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; }; codec_audio: sound { compatible = "simple-audio-card"; simple-audio-card,name = "J722S-EVM"; simple-audio-card,widgets = "Headphone", "Headphone Jack", "Line", "Line In", "Microphone", "Microphone Jack"; simple-audio-card,routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", "LINE1L", "Line In", "LINE1R", "Line In", "MIC3R", "Microphone Jack", "Microphone Jack", "Mic Bias"; simple-audio-card,format = "dsp_b"; simple-audio-card,bitclock-master = <&sound_master>; simple-audio-card,frame-master = <&sound_master>; simple-audio-card,bitclock-inversion; simple-audio-card,cpu { sound-dai = <&mcasp1>; }; sound_master: simple-audio-card,codec { sound-dai = <&tlv320aic3106>; clocks = <&audio_refclk1>; }; }; transceiver0: can-phy0 { compatible = "ti,tcan1042"; #phy-cells = <0>; max-bitrate = <5000000>; pinctrl-names = "default"; pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; standby-gpios = <&mcu_gpio0 12 GPIO_ACTIVE_HIGH>; }; transceiver1: can-phy1 { compatible = "ti,tcan1042"; #phy-cells = <0>; max-bitrate = <5000000>; }; transceiver2: can-phy2 { compatible = "ti,tcan1042"; #phy-cells = <0>; max-bitrate = <5000000>; standby-gpios = <&exp1 17 GPIO_ACTIVE_HIGH>; }; }; &main_pmx0 { main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x1dc, PIN_INPUT, 0) /* (C22) MCAN0_RX */ J722S_IOPAD(0x1d8, PIN_OUTPUT, 0) /*(D22) MCAN0_TX */ >; }; main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ >; bootph-all; }; main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ >; bootph-all; }; main_uart5_pins_default: main-uart5-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0108, PIN_INPUT, 3) /* (J27) UART5_RXD */ J722S_IOPAD(0x010c, PIN_OUTPUT, 3) /* (H27) UART5_TXD */ >; }; vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */ >; bootph-all; }; main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ >; bootph-all; }; mdio_pins_default: mdio-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ >; }; ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */ J722S_IOPAD(0x002c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */ J722S_IOPAD(0x000c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */ J722S_IOPAD(0x0010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */ J722S_IOPAD(0x0014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */ J722S_IOPAD(0x0018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */ J722S_IOPAD(0x001c, PIN_INPUT, 0) /* (L21) OSPI0_D4 */ J722S_IOPAD(0x0020, PIN_INPUT, 0) /* (M26) OSPI0_D5 */ J722S_IOPAD(0x0024, PIN_INPUT, 0) /* (N27) OSPI0_D6 */ J722S_IOPAD(0x0028, PIN_INPUT, 0) /* (M27) OSPI0_D7 */ J722S_IOPAD(0x0008, PIN_INPUT, 0) /* (L22) OSPI0_DQS */ >; bootph-all; }; rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ >; }; main_usb1_pins_default: main-usb1-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0258, PIN_INPUT, 0) /* (B27) USB1_DRVVBUS */ >; }; main_mcasp1_pins_default: main-mcasp1-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0090, PIN_INPUT, 2) /* (P27) GPMC0_BE0n_CLE.MCASP1_ACLKX */ J722S_IOPAD(0x0098, PIN_INPUT, 2) /* (V21) GPMC0_WAIT0.MCASP1_AFSX */ J722S_IOPAD(0x008c, PIN_OUTPUT, 2) /* (N23) GPMC0_WEn.MCASP1_AXR0 */ J722S_IOPAD(0x0084, PIN_INPUT, 2) /* (N21) GPMC0_ADVn_ALE.MCASP1_AXR2 */ >; }; audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ >; }; }; &cpsw3g { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins_default>; }; &cpsw3g_mdio { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio_pins_default>; cpsw3g_phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; }; }; &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; status = "okay"; }; &main_gpio1 { status = "okay"; }; &main_uart0 { pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; status = "okay"; bootph-all; }; &main_uart5 { /* MAIN UART 5 is used by System firmware */ pinctrl-names = "default"; pinctrl-0 = <&main_uart5_pins_default>; status = "reserved"; }; &mcu_pmx0 { mcu_mcan0_pins_default: mcu-mcan0-default-pins { pinctrl-single,pins = < J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */ J722S_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (B2) MCU_MCAN0_TX */ >; }; mcu_mcan1_pins_default: mcu-mcan1-default-pins { pinctrl-single,pins = < J722S_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (B1) MCU_MCAN1_RX */ J722S_MCU_IOPAD(0x03C, PIN_OUTPUT, 0) /*(C1) MCU_MCAN1_TX */ >; }; mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { pinctrl-single,pins = < J722S_MCU_IOPAD(0x0030, PIN_OUTPUT, 7) /* (C3) MCU_GPIO0_12 */ >; }; wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ >; bootph-all; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ >; bootph-all; }; }; &wkup_uart0 { /* WKUP UART0 is used by Device Manager firmware */ pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; status = "reserved"; bootph-all; }; &wkup_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; status = "okay"; bootph-all; }; &k3_clks { /* Configure AUDIO_EXT_REFCLK1 pin as output */ pinctrl-names = "default"; pinctrl-0 = <&audio_ext_refclk1_pins_default>; }; &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; status = "okay"; bootph-all; exp1: gpio@23 { compatible = "ti,tca6424"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; gpio-line-names = "TRC_MUX_SEL", "OSPI/ONAND_MUX_SEL", "MCASP1_FET_SEL", "CTRL_PM_I2C_OE#", "CSI_VIO_SEL", "USB2.0_MUX_SEL", "CSI01_MUX_SEL_2", "CSI23_MUX_SEL_2", "LMK1_OE1", "LMK1_OE0", "LMK2_OE0", "LMK2_OE1", "GPIO_RGMII1_RST#", "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", "GPIO_uSD_PWR_EN", "USER_LED2", "MCAN0_STB", "PCIe0_1L_RC_RSTz", "PCIe0_1L_PRSNT#", "ENET1_EXP_SPARE2", "ENET1_EXP_PWRDN", "PD_I2ENET1_I2CMUX_SELC_IRQ", "ENET1_EXP_RESETZ"; p05-hog { /* P05 - USB2.0_MUX_SEL */ gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; output-high; }; p01_hog: p01-hog { /* P01 - TRC_MUX_SEL */ gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; output-low; line-name = "TRC_MUX_SEL"; }; p02_hog: p02-hog { /* P02 - MCASP1_FET_SEL */ gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-high; line-name = "MCASP1_FET_SEL"; }; p13_hog: p13-hog { /* P13 - GPIO_AUD_RSTn */ gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; output-high; line-name = "GPIO_AUD_RSTn"; }; }; tlv320aic3106: audio-codec@1b { #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; ai3x-micbias-vg = <1>; /* 2.0V */ AVDD-supply = <&vsys_io_3v3>; IOVDD-supply = <&vsys_io_3v3>; DRVDD-supply = <&vsys_io_3v3>; DVDD-supply = <&vsys_io_1v8>; }; }; &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; spi-max-frequency = <25000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; bootph-all; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "ospi.tiboot3"; reg = <0x00 0x80000>; }; partition@80000 { label = "ospi.tispl"; reg = <0x80000 0x200000>; }; partition@280000 { label = "ospi.u-boot"; reg = <0x280000 0x400000>; }; partition@680000 { label = "ospi.env"; reg = <0x680000 0x40000>; }; partition@6c0000 { label = "ospi.env.backup"; reg = <0x6c0000 0x40000>; }; partition@800000 { label = "ospi.rootfs"; reg = <0x800000 0x37c0000>; }; partition@3fc0000 { label = "ospi.phypattern"; reg = <0x3fc0000 0x40000>; }; }; }; }; &sdhci0 { disable-wp; bootph-all; ti,driver-strength-ohm = <50>; status = "okay"; }; &sdhci1 { /* SD/MMC */ vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; status = "okay"; bootph-all; }; &mailbox0_cluster0 { status = "okay"; mbox_wkup_r5_0: mbox-wkup-r5-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; }; &mailbox0_cluster1 { status = "okay"; mbox_mcu_r5_0: mbox-mcu-r5-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; }; &mailbox0_cluster2 { status = "okay"; mbox_c7x_0: mbox-c7x-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; }; &mailbox0_cluster3 { status = "okay"; mbox_main_r5_0: mbox-main-r5-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; mbox_c7x_1: mbox-c7x-1 { ti,mbox-rx = <2 0 0>; ti,mbox-tx = <3 0 0>; }; }; /* Timers are used by Remoteproc firmware */ &main_timer0 { status = "reserved"; }; &main_timer1 { status = "reserved"; }; &main_timer2 { status = "reserved"; }; &wkup_r5fss0 { status = "okay"; }; &wkup_r5fss0_core0 { mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>; memory-region = <&wkup_r5fss0_core0_dma_memory_region>, <&wkup_r5fss0_core0_memory_region>; }; &mcu_r5fss0 { status = "okay"; }; &mcu_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &main_r5fss0 { status = "okay"; }; &main_r5fss0_core0 { mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &c7x_0 { mboxes = <&mailbox0_cluster2 &mbox_c7x_0>; memory-region = <&c7x_0_dma_memory_region>, <&c7x_0_memory_region>; status = "okay"; }; &c7x_1 { mboxes = <&mailbox0_cluster3 &mbox_c7x_1>; memory-region = <&c7x_1_dma_memory_region>, <&c7x_1_memory_region>; status = "okay"; }; &serdes_ln_ctrl { idle-states = , ; }; &serdes0 { status = "okay"; serdes0_usb_link: phy@0 { reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>; cdns,phy-type = ; resets = <&serdes_wiz0 1>; }; }; &serdes1 { status = "okay"; serdes1_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>; cdns,phy-type = ; resets = <&serdes_wiz1 1>; }; }; &pcie0_rc { reset-gpios = <&exp1 18 GPIO_ACTIVE_HIGH>; phys = <&serdes1_pcie_link>; phy-names = "pcie-phy"; status = "okay"; }; &usbss0 { ti,vbus-divider; status = "okay"; }; &usb0 { dr_mode = "otg"; usb-role-switch; }; &usbss1 { pinctrl-names = "default"; pinctrl-0 = <&main_usb1_pins_default>; ti,vbus-divider; status = "okay"; }; &usb1 { dr_mode = "host"; maximum-speed = "super-speed"; phys = <&serdes0_usb_link>; phy-names = "cdns3,usb3-phy"; }; &mcasp1 { status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&main_mcasp1_pins_default>; op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 >; }; &mcu_mcan0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_mcan0_pins_default>; phys = <&transceiver0>; status = "okay"; }; &mcu_mcan1 { pinctrl-names = "default"; pinctrl-0 = <&mcu_mcan1_pins_default>; phys = <&transceiver1>; status = "okay"; }; &main_mcan0 { pinctrl-names = "default"; pinctrl-0 = <&main_mcan0_pins_default>; phys = <&transceiver2>; status = "okay"; }; &mcu_gpio0 { status = "okay"; };