// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Device Tree file for the AM62P5-SK * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ * * Schematics: https://www.ti.com/lit/zip/sprr487 */ /dts-v1/; #include #include #include #include "k3-am62p5.dtsi" / { compatible = "ti,am62p5-sk", "ti,am62p5"; model = "Texas Instruments AM62P5 SK"; aliases { serial0 = &wkup_uart0; serial2 = &main_uart0; serial3 = &main_uart1; mmc0 = &sdhci0; mmc1 = &sdhci1; mmc2 = &sdhci2; spi0 = &ospi0; ethernet0 = &cpsw_port1; ethernet1 = &cpsw_port2; usb0 = &usb0; usb1 = &usb1; }; chosen { stdout-path = &main_uart0; }; memory@80000000 { /* 8G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000001 0x80000000>; device_type = "memory"; bootph-pre-ram; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; no-map; }; secure_ddr: optee@9e800000 { reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ no-map; }; wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c900000 0x00 0x01e00000>; no-map; }; }; vmain_pd: regulator-0 { /* TPS65988 PD CONTROLLER OUTPUT */ compatible = "regulator-fixed"; regulator-name = "vmain_pd"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; bootph-all; }; vcc_5v0: regulator-1 { /* Output of TPS630702RNMR */ compatible = "regulator-fixed"; regulator-name = "vcc_5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vmain_pd>; regulator-always-on; regulator-boot-on; bootph-all; }; vdd_mmc1: regulator-2 { /* TPS22918DBVR */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; enable-active-high; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; bootph-all; }; vddshv_sdio: regulator-3 { compatible = "regulator-gpio"; regulator-name = "vddshv_sdio"; pinctrl-names = "default"; pinctrl-0 = <&vddshv_sdio_pins_default>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; bootph-all; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&usr_led_pins_default>; led-0 { label = "am62-sk:green:heartbeat"; gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; function = LED_FUNCTION_HEARTBEAT; default-state = "off"; }; }; tlv320_mclk: clk-0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <12288000>; }; codec_audio: sound { compatible = "simple-audio-card"; simple-audio-card,name = "AM62x-SKEVM"; simple-audio-card,widgets = "Headphone", "Headphone Jack", "Line", "Line In", "Microphone", "Microphone Jack"; simple-audio-card,routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", "LINE1L", "Line In", "LINE1R", "Line In", "MIC3R", "Microphone Jack", "Microphone Jack", "Mic Bias"; simple-audio-card,format = "dsp_b"; simple-audio-card,bitclock-master = <&sound_master>; simple-audio-card,frame-master = <&sound_master>; simple-audio-card,bitclock-inversion; simple-audio-card,cpu { sound-dai = <&mcasp1>; }; sound_master: simple-audio-card,codec { sound-dai = <&tlv320aic3106>; clocks = <&tlv320_mclk>; }; }; }; &main_gpio0 { bootph-all; }; &main_gpio1 { bootph-all; }; &main_pmx0 { bootph-all; main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */ AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */ >; }; main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */ AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */ >; bootph-all; }; main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */ AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */ >; }; main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C22) UART0_RTSn.GPIO1_23 */ >; }; main_mcasp1_pins_default: main-mcasp1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */ AM62PX_IOPAD(0x008c, PIN_OUTPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */ AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */ >; }; main_mdio1_pins_default: main-mdio1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */ AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */ >; }; main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */ AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */ AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */ AM62PX_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H23) MMC1_DAT1 */ AM62PX_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (H22) MMC1_DAT2 */ AM62PX_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */ >; bootph-all; }; main_mmc2_pins_default: main-mmc2-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0120, PIN_INPUT, 0) /* (K24) MMC2_CMD */ AM62PX_IOPAD(0x0118, PIN_OUTPUT, 0) /* (K21) MMC2_CLK */ AM62PX_IOPAD(0x011C, PIN_INPUT, 0) /* () MMC2_CLKLB */ AM62PX_IOPAD(0x0114, PIN_INPUT, 0) /* (K23) MMC2_DAT0 */ AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */ AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */ AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */ >; bootph-all; }; main_rgmii1_pins_default: main-rgmii1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */ AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */ AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */ AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */ AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */ AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */ AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */ AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */ AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */ AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */ AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */ AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */ >; bootph-all; }; main_rgmii2_pins_default: main-rgmii2-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */ AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */ AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */ AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */ AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */ AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */ AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */ AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */ AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */ AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */ AM62PX_IOPAD(0x0168, PIN_INPUT, 0) /* (D16) RGMII2_TXC */ AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */ >; bootph-all; }; main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ >; bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0194, PIN_INPUT, 2) /* (D25) MCASP0_AXR3.UART1_CTSn */ AM62PX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2.UART1_RTSn */ AM62PX_IOPAD(0x01ac, PIN_INPUT, 2) /* (G23) MCASP0_AFSR.UART1_RXD */ AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */ >; bootph-all; }; main_usb1_pins_default: main-usb1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0258, PIN_INPUT, 0) /* (G21) USB1_DRVVBUS */ >; }; main_wlirq_pins_default: main-wlirq-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0128, PIN_INPUT, 7) /* (K25) MMC2_SDWP.GPIO0_72 */ >; }; ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK */ AM62PX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */ AM62PX_IOPAD(0x000c, PIN_INPUT, 0) /* (L25) OSPI0_D0 */ AM62PX_IOPAD(0x0010, PIN_INPUT, 0) /* (N24) OSPI0_D1 */ AM62PX_IOPAD(0x0014, PIN_INPUT, 0) /* (N25) OSPI0_D2 */ AM62PX_IOPAD(0x0018, PIN_INPUT, 0) /* (M24) OSPI0_D3 */ AM62PX_IOPAD(0x001c, PIN_INPUT, 0) /* (N21) OSPI0_D4 */ AM62PX_IOPAD(0x0020, PIN_INPUT, 0) /* (N22) OSPI0_D5 */ AM62PX_IOPAD(0x0024, PIN_INPUT, 0) /* (P21) OSPI0_D6 */ AM62PX_IOPAD(0x0028, PIN_INPUT, 0) /* (N20) OSPI0_D7 */ AM62PX_IOPAD(0x0008, PIN_INPUT, 0) /* (P22) OSPI0_DQS */ >; bootph-all; }; usr_led_pins_default: usr-led-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0244, PIN_INPUT, 7) /* (D24) MMC1_SDWP.GPIO1_49 */ >; }; vddshv_sdio_pins_default: vddshvr-sdio-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x007c, PIN_INPUT, 7) /* (Y25) GPMC0_CLK.GPIO0_31 */ >; bootph-all; }; wlan_en_pins_default: wlan-en-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0124, PIN_INPUT, 7) /* (J25) MMC2_SDCD.GPIO0_71 */ >; }; }; &main_i2c0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; typec_pd0: usb-power-controller@3f { compatible = "ti,tps6598x"; reg = <0x3f>; connector { compatible = "usb-c-connector"; label = "USB-C"; self-powered; data-role = "dual"; power-role = "sink"; port { usb_con_hs: endpoint { remote-endpoint = <&usb0_hs_ep>; }; }; }; }; }; &main_i2c1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <100000>; bootph-all; tlv320aic3106: audio-codec@1b { #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; ai3x-micbias-vg = <1>; /* 2.0V */ }; exp1: gpio@22 { compatible = "ti,tca6424"; reg = <0x22>; gpio-controller; #gpio-cells = <2>; gpio-line-names = "OLDI_INT#", "x8_NAND_DETECT", "UART1_FET_SEL", "MMC1_SD_EN", "VPP_EN", "EXP_PS_3V3_EN", "UART1_FET_BUF_EN", "EXP_HAT_DETECT", "DSI_GPIO0", "DSI_GPIO1", "OLDI_EDID", "BT_UART_WAKE_SOC_3V3", "USB_TYPEA_OC_INDICATION", "CSI_GPIO0", "CSI_GPIO1", "WLAN_ALERTn", "HDMI_INTn", "TEST_GPIO2", "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", "MCASP1_FET_SEL", "DSI_EDID", "PD_I2C_IRQ", "IO_EXP_TEST_LED"; interrupt-parent = <&main_gpio1>; interrupts = <23 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; bootph-all; }; exp2: gpio@23 { compatible = "ti,tca6424"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; gpio-line-names = "BT_EN_SOC", "EXP_PS_5V0_EN", "", "", "", "", "", "", "WL_LT_EN", "", "TP3", "TP6", "TP4", "TP7", "TP5", "TP8", "SoC_I2C2_MCAN_SEL", "GPIO_HDMI_RSTn", "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", "GPIO_OLDI_RSTn", "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", "SoC_WLAN_SDIO_RST"; }; }; &main_i2c2 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c2_pins_default>; clock-frequency = <400000>; }; &sdhci0 { status = "okay"; ti,driver-strength-ohm = <50>; disable-wp; bootph-all; }; &sdhci1 { /* SD/MMC */ status = "okay"; vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vddshv_sdio>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; disable-wp; bootph-all; }; &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; status = "okay"; }; &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; status = "okay"; }; &cpsw_port2 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy1>; status = "okay"; }; &cpsw3g_mdio { pinctrl-names = "default"; pinctrl-0 = <&main_mdio1_pins_default>; status = "okay"; cpsw3g_phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; }; cpsw3g_phy1: ethernet-phy@1 { reg = <1>; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; }; }; &usbss0 { status = "okay"; ti,vbus-divider; }; &usbss1 { status = "okay"; ti,vbus-divider; }; &usb0 { usb-role-switch; port { usb0_hs_ep: endpoint { remote-endpoint = <&usb_con_hs>; }; }; }; &usb1 { dr_mode = "host"; pinctrl-names = "default"; pinctrl-0 = <&main_usb1_pins_default>; }; &mcasp1 { status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&main_mcasp1_pins_default>; op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 >; }; &fss { bootph-all; }; &ospi0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; bootph-all; flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; spi-max-frequency = <25000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; bootph-all; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; bootph-all; partition@0 { label = "ospi.tiboot3"; reg = <0x00 0x80000>; }; partition@80000 { label = "ospi.tispl"; reg = <0x80000 0x200000>; }; partition@280000 { label = "ospi.u-boot"; reg = <0x280000 0x400000>; }; partition@680000 { label = "ospi.env"; reg = <0x680000 0x40000>; }; partition@6c0000 { label = "ospi.env.backup"; reg = <0x6c0000 0x40000>; }; partition@800000 { label = "ospi.rootfs"; reg = <0x800000 0x37c0000>; }; partition@3fc0000 { label = "ospi.phypattern"; reg = <0x3fc0000 0x40000>; bootph-all; }; }; }; }; &mailbox0_cluster0 { mbox_r5_0: mbox-r5-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; }; &mailbox0_cluster1 { mbox_mcu_r5_0: mbox-mcu-r5-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; }; &main_uart0 { pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; status = "okay"; bootph-all; }; &main_uart1 { pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; /* Main UART1 is used by TIFS firmware */ status = "reserved"; bootph-all; }; &mcu_pmx0 { bootph-all; wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ >; bootph-all; }; }; &wkup_uart0 { /* WKUP UART0 is used by DM firmware */ pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; status = "reserved"; bootph-all; }; /* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; }; &mcu_gpio_intr { status = "reserved"; };