// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2023 Ondřej Jirman */ /dts-v1/; #include #include #include #include #include #include "rk3588.dtsi" / { model = "Xunlong Orange Pi 5 Plus"; compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588"; aliases { mmc0 = &sdhci; mmc1 = &sdmmc; }; chosen { stdout-path = "serial2:1500000n8"; }; adc-keys-0 { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; button-maskrom { label = "Mask Rom"; linux,code = ; press-threshold-microvolt = <2000>; }; }; adc-keys-1 { compatible = "adc-keys"; io-channels = <&saradc 1>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; button-recovery { label = "Recovery"; linux,code = ; press-threshold-microvolt = <2000>; }; }; speaker_amp: speaker-audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Speaker Amp"; }; headphone_amp: headphones-audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Headphones Amp"; }; ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_receiver_pin>; }; gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&blue_led_pin>; led { color = ; function = LED_FUNCTION_INDICATOR; function-enumerator = <1>; gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; }; }; fan: pwm-fan { compatible = "pwm-fan"; cooling-levels = <0 70 75 80 100>; fan-supply = <&vcc5v0_sys>; pwms = <&pwm3 0 50000 0>; #cooling-cells = <2>; }; pwm-leds { compatible = "pwm-leds"; led { color = ; function = LED_FUNCTION_INDICATOR; function-enumerator = <2>; max-brightness = <255>; pwms = <&pwm2 0 25000 0>; }; }; rfkill { compatible = "rfkill-gpio"; label = "rfkill-pcie-wlan"; radio-type = "wlan"; shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; }; sound { compatible = "simple-audio-card"; pinctrl-names = "default"; pinctrl-0 = <&hp_detect>; simple-audio-card,name = "Analog"; simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; simple-audio-card,hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; simple-audio-card,bitclock-master = <&daicpu>; simple-audio-card,frame-master = <&daicpu>; /*TODO: SARADC_IN3 is used as MIC detection / key input */ simple-audio-card,widgets = "Microphone", "Onboard Microphone", "Microphone", "Microphone Jack", "Speaker", "Speaker", "Headphone", "Headphones"; simple-audio-card,routing = "Headphones", "LOUT1", "Headphones", "ROUT1", "Speaker", "LOUT2", "Speaker", "ROUT2", "Headphones", "Headphones Amp OUTL", "Headphones", "Headphones Amp OUTR", "Headphones Amp INL", "LOUT1", "Headphones Amp INR", "ROUT1", "Speaker", "Speaker Amp OUTL", "Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "LOUT2", "Speaker Amp INR", "ROUT2", /* single ended signal to LINPUT1 */ "LINPUT1", "Microphone Jack", "RINPUT1", "Microphone Jack", /* differential signal */ "LINPUT2", "Onboard Microphone", "RINPUT2", "Onboard Microphone"; daicpu: simple-audio-card,cpu { sound-dai = <&i2s0_8ch>; system-clock-frequency = <12288000>; }; daicodec: simple-audio-card,codec { sound-dai = <&es8388>; system-clock-frequency = <12288000>; }; }; vcc3v3_pcie30: vcc3v3-pcie30-regulator { compatible = "regulator-fixed"; enable-active-high; gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; regulator-name = "vcc3v3_pcie30"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <5000>; vin-supply = <&vcc5v0_sys>; }; vcc3v3_pcie_eth: vcc3v3-pcie-eth-regulator { compatible = "regulator-fixed"; gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; regulator-name = "vcc3v3_pcie_eth"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; vin-supply = <&vcc5v0_sys>; }; vcc3v3_wf: vcc3v3-wf-regulator { compatible = "regulator-fixed"; enable-active-high; gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; regulator-name = "vcc3v3_wf"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; vin-supply = <&vcc5v0_sys>; }; vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; vcc5v0_usb20: vcc5v0-usb20-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_usb20_en>; regulator-name = "vcc5v0_usb20"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_sys>; }; }; &combphy0_ps { status = "okay"; }; &combphy1_ps { status = "okay"; }; &combphy2_psu { status = "okay"; }; &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; &cpu_b1 { cpu-supply = <&vdd_cpu_big0_s0>; }; &cpu_b2 { cpu-supply = <&vdd_cpu_big1_s0>; }; &cpu_b3 { cpu-supply = <&vdd_cpu_big1_s0>; }; &cpu_l0 { cpu-supply = <&vdd_cpu_lit_s0>; }; &cpu_l1 { cpu-supply = <&vdd_cpu_lit_s0>; }; &cpu_l2 { cpu-supply = <&vdd_cpu_lit_s0>; }; &cpu_l3 { cpu-supply = <&vdd_cpu_lit_s0>; }; &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; status = "okay"; vdd_cpu_big0_s0: regulator@42 { compatible = "rockchip,rk8602"; reg = <0x42>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu_big0_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <2300>; vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_big1_s0: regulator@43 { compatible = "rockchip,rk8603", "rockchip,rk8602"; reg = <0x43>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu_big1_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <2300>; vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; }; &i2c6 { clock-frequency = <400000>; status = "okay"; hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; interrupts = ; #clock-cells = <0>; clock-output-names = "hym8563"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; wakeup-source; }; }; &i2c7 { status = "okay"; /* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */ es8388: audio-codec@11 { compatible = "everest,es8388"; reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; clock-names = "mclk"; AVDD-supply = <&vcc_1v8_s0>; DVDD-supply = <&vcc_1v8_s0>; HPVDD-supply = <&vcc_3v3_s0>; PVDD-supply = <&vcc_3v3_s0>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-rates = <12288000>; #sound-dai-cells = <0>; }; }; &i2s0_8ch { pinctrl-names = "default"; pinctrl-0 = <&i2s0_lrck &i2s0_mclk &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; status = "okay"; }; &i2s2_2ch { pinctrl-names = "default"; pinctrl-0 = <&i2s2m0_lrck &i2s2m0_sclk &i2s2m0_sdi &i2s2m0_sdo>; status = "okay"; }; /* phy1 - M.KEY socket */ &pcie2x1l0 { reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_wf>; status = "okay"; }; /* phy2 - right ethernet port */ &pcie2x1l1 { reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie_eth>; status = "okay"; }; /* phy0 - left ethernet port */ &pcie2x1l2 { reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie_eth>; status = "okay"; }; &pcie30phy { status = "okay"; }; &pcie3x4 { reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie30>; status = "okay"; }; &pinctrl { hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; leds { blue_led_pin: blue-led { rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; ir-receiver { ir_receiver_pin: ir-receiver-pin { rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sound { hp_detect: hp-detect { rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { vcc5v0_usb20_en: vcc5v0-usb20-en { rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pwm2 { pinctrl-0 = <&pwm2m1_pins>; pinctrl-names = "default"; status = "okay"; }; &pwm3 { pinctrl-0 = <&pwm3m1_pins>; status = "okay"; }; &saradc { vref-supply = <&vcc_1v8_s0>; status = "okay"; }; &sdhci { bus-width = <8>; no-sdio; no-sd; non-removable; max-frequency = <200000000>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; status = "okay"; }; &sdmmc { bus-width = <4>; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; max-frequency = <150000000>; no-sdio; no-mmc; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vccio_sd_s0>; status = "okay"; }; &sfc { pinctrl-names = "default"; pinctrl-0 = <&fspim1_pins>; status = "okay"; spi_flash: flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <100000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; }; }; &spi2 { assigned-clocks = <&cru CLK_SPI2>; assigned-clock-rates = <200000000>; num-cs = <1>; pinctrl-names = "default"; pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; status = "okay"; pmic@0 { compatible = "rockchip,rk806"; reg = <0x0>; interrupt-parent = <&gpio0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; spi-max-frequency = <1000000>; system-power-controller; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; vcc3-supply = <&vcc5v0_sys>; vcc4-supply = <&vcc5v0_sys>; vcc5-supply = <&vcc5v0_sys>; vcc6-supply = <&vcc5v0_sys>; vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc5v0_sys>; vcc9-supply = <&vcc5v0_sys>; vcc10-supply = <&vcc5v0_sys>; vcc11-supply = <&vcc_2v0_pldo_s3>; vcc12-supply = <&vcc5v0_sys>; vcc13-supply = <&vdd2_ddr_s3>; vcc14-supply = <&vdd2_ddr_s3>; vcca-supply = <&vcc5v0_sys>; gpio-controller; #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; rk806_dvs2_null: dvs2-null-pins { pins = "gpio_pwrctrl2"; function = "pin_fun0"; }; rk806_dvs3_null: dvs3-null-pins { pins = "gpio_pwrctrl3"; function = "pin_fun0"; }; regulators { vdd_gpu_s0: dcdc-reg1 { regulator-name = "vdd_gpu_s0"; regulator-boot-on; regulator-enable-ramp-delay = <400>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_lit_s0: dcdc-reg2 { regulator-name = "vdd_cpu_lit_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_log_s0: dcdc-reg3 { regulator-name = "vdd_log_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <675000>; regulator-max-microvolt = <825000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <750000>; }; }; vdd_vdenc_s0: dcdc-reg4 { regulator-name = "vdd_vdenc_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <825000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_ddr_s0: dcdc-reg5 { regulator-name = "vdd_ddr_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <675000>; regulator-max-microvolt = <900000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <850000>; }; }; vdd2_ddr_s3: dcdc-reg6 { regulator-name = "vdd2_ddr_s3"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_2v0_pldo_s3: dcdc-reg7 { regulator-name = "vdd_2v0_pldo_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <2000000>; }; }; vcc_3v3_s3: dcdc-reg8 { regulator-name = "vcc_3v3_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vddq_ddr_s0: dcdc-reg9 { regulator-name = "vddq_ddr_s0"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v8_s3: dcdc-reg10 { regulator-name = "vcc_1v8_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; avcc_1v8_s0: pldo-reg1 { regulator-name = "avcc_1v8_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; /* shorted to avcc_1v8_s0 on the board */ vcc_1v8_s0: pldo-reg2 { regulator-name = "vcc_1v8_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; avdd_1v2_s0: pldo-reg3 { regulator-name = "avdd_1v2_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3_s0: pldo-reg4 { regulator-name = "vcc_3v3_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd_s0: pldo-reg5 { regulator-name = "vccio_sd_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; }; }; pldo6_s3: pldo-reg6 { regulator-name = "pldo6_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vdd_0v75_s3: nldo-reg1 { regulator-name = "vdd_0v75_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <750000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <750000>; }; }; vdd_ddr_pll_s0: nldo-reg2 { regulator-name = "vdd_ddr_pll_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <850000>; regulator-max-microvolt = <850000>; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <850000>; }; }; avdd_0v75_s0: nldo-reg3 { regulator-name = "avdd_0v75_s0"; regulator-always-on; regulator-boot-on; /* * The schematic mentions that actual setting * should be 0.8375V. RK3588 datasheet specifies * maximum as 0.825V. So we set datasheet max * here. */ regulator-min-microvolt = <825000>; regulator-max-microvolt = <825000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_0v85_s0: nldo-reg4 { regulator-name = "vdd_0v85_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <850000>; regulator-max-microvolt = <850000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_0v75_s0: nldo-reg5 { regulator-name = "vdd_0v75_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <750000>; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; &tsadc { status = "okay"; }; &u2phy2 { status = "okay"; }; &u2phy3 { status = "okay"; }; &u2phy2_host { phy-supply = <&vcc5v0_usb20>; status = "okay"; }; &u2phy3_host { phy-supply = <&vcc5v0_usb20>; status = "okay"; }; &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; &uart9 { pinctrl-0 = <&uart9m0_xfer>; status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; };