// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* * Device Tree Source for the RZ/G2UL SoC * * Copyright (C) 2022 Renesas Electronics Corp. */ #include #define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr #include "r9a07g043.dtsi" / { cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { compatible = "arm,cortex-a55"; reg = <0>; device_type = "cpu"; #cooling-cells = <2>; next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A07G043_CLK_I>; operating-points-v2 = <&cluster0_opp>; }; L3_CA55: cache-controller-0 { compatible = "cache"; cache-unified; cache-size = <0x40000>; cache-level = <3>; }; }; psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; }; timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; }; &soc { interrupt-parent = <&gic>; irqc: interrupt-controller@110a0000 { compatible = "renesas,r9a07g043u-irqc", "renesas,rzg2l-irqc"; reg = <0 0x110a0000 0 0x10000>; #interrupt-cells = <2>; #address-cells = <0>; interrupt-controller; interrupts = , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ; interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", "irq4", "irq5", "irq6", "irq7", "tint0", "tint1", "tint2", "tint3", "tint4", "tint5", "tint6", "tint7", "tint8", "tint9", "tint10", "tint11", "tint12", "tint13", "tint14", "tint15", "tint16", "tint17", "tint18", "tint19", "tint20", "tint21", "tint22", "tint23", "tint24", "tint25", "tint26", "tint27", "tint28", "tint29", "tint30", "tint31", "bus-err"; clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>, <&cpg CPG_MOD R9A07G043_IA55_PCLK>; clock-names = "clk", "pclk"; power-domains = <&cpg>; resets = <&cpg R9A07G043_IA55_RESETN>; }; gic: interrupt-controller@11900000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; reg = <0x0 0x11900000 0 0x40000>, <0x0 0x11940000 0 0x60000>; interrupts = ; }; }; &sysc { interrupts = , , , ; interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", "ca55_deny"; };