// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2023, Linaro Limited */ /dts-v1/; #include #include #include "sm8650.dtsi" #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" #define PMK8550VE_SID 8 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" #include "pmr735d_a.dtsi" / { model = "Qualcomm Technologies, Inc. SM8650 QRD"; compatible = "qcom,sm8650-qrd", "qcom,sm8650"; aliases { serial0 = &uart15; serial1 = &uart14; }; chosen { stdout-path = "serial0:115200n8"; }; gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&volume_up_n>; pinctrl-names = "default"; key-volume-up { label = "Volume Up"; linux,code = ; gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; wakeup-source; }; }; pmic-glink { compatible = "qcom,sm8650-pmic-glink", "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; reg = <0>; power-role = "dual"; data-role = "dual"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; pmic_glink_hs_in: endpoint { remote-endpoint = <&usb_1_dwc3_hs>; }; }; port@1 { reg = <1>; pmic_glink_ss_in: endpoint { remote-endpoint = <&redriver_ss_out>; }; }; port@2 { reg = <2>; pmic_glink_sbu: endpoint { remote-endpoint = <&wcd_usbss_sbu_mux>; }; }; }; }; }; sound { compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; model = "SM8650-QRD"; audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", "AMIC3", "MIC BIAS3", "AMIC4", "MIC BIAS3", "AMIC5", "MIC BIAS4", "TX SWR_INPUT0", "ADC1_OUTPUT", "TX SWR_INPUT1", "ADC2_OUTPUT", "TX SWR_INPUT2", "ADC3_OUTPUT", "TX SWR_INPUT3", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; cpu { sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; }; codec { sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wcd-capture-dai-link { link-name = "WCD Capture"; cpu { sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; }; codec { sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wsa-dai-link { link-name = "WSA Playback"; cpu { sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; }; codec { sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; }; platform { sound-dai = <&q6apm>; }; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; regulator-boot-on; }; wcd939x: audio-codec { compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; pinctrl-0 = <&wcd_default>; pinctrl-names = "default"; qcom,micbias1-microvolt = <1800000>; qcom,micbias2-microvolt = <1800000>; qcom,micbias3-microvolt = <1800000>; qcom,micbias4-microvolt = <1800000>; qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; qcom,rx-device = <&wcd_rx>; qcom,tx-device = <&wcd_tx>; reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; vdd-buck-supply = <&vreg_l15b_1p8>; vdd-rxtx-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l15b_1p8>; vdd-mic-bias-supply = <&vreg_bob1>; #sound-dai-cells = <1>; mode-switch; orientation-switch; port { wcd_codec_headset_in: endpoint { remote-endpoint = <&wcd_usbss_headset_out>; }; }; }; wcn7850-pmu { compatible = "qcom,wcn7850-pmu"; pinctrl-names = "default"; pinctrl-0 = <&wlan_en>, <&bt_default>; wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; vdd-supply = <&vreg_s4i_0p85>; vddio-supply = <&vreg_l15b_1p8>; vddio1p2-supply = <&vreg_l3c_1p2>; vddaon-supply = <&vreg_s2c_0p8>; vdddig-supply = <&vreg_s3c_0p9>; vddrfa1p2-supply = <&vreg_s1c_1p2>; vddrfa1p8-supply = <&vreg_s6c_1p8>; clocks = <&rpmhcc RPMH_RF_CLK1>; regulators { vreg_pmu_rfa_cmn: ldo0 { regulator-name = "vreg_pmu_rfa_cmn"; }; vreg_pmu_aon_0p59: ldo1 { regulator-name = "vreg_pmu_aon_0p59"; }; vreg_pmu_wlcx_0p8: ldo2 { regulator-name = "vreg_pmu_wlcx_0p8"; }; vreg_pmu_wlmx_0p85: ldo3 { regulator-name = "vreg_pmu_wlmx_0p85"; }; vreg_pmu_btcmx_0p85: ldo4 { regulator-name = "vreg_pmu_btcmx_0p85"; }; vreg_pmu_rfa_0p8: ldo5 { regulator-name = "vreg_pmu_rfa_0p8"; }; vreg_pmu_rfa_1p2: ldo6 { regulator-name = "vreg_pmu_rfa_1p2"; }; vreg_pmu_rfa_1p8: ldo7 { regulator-name = "vreg_pmu_rfa_1p8"; }; vreg_pmu_pcie_0p9: ldo8 { regulator-name = "vreg_pmu_pcie_0p9"; }; vreg_pmu_pcie_1p8: ldo9 { regulator-name = "vreg_pmu_pcie_1p8"; }; }; }; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8550-rpmh-regulators"; vdd-bob1-supply = <&vph_pwr>; vdd-bob2-supply = <&vph_pwr>; vdd-l2-l13-l14-supply = <&vreg_bob1>; vdd-l3-supply = <&vreg_s1c_1p2>; vdd-l5-l16-supply = <&vreg_bob1>; vdd-l6-l7-supply = <&vreg_bob1>; vdd-l8-l9-supply = <&vreg_bob1>; vdd-l11-supply = <&vreg_s1c_1p2>; vdd-l12-supply = <&vreg_s6c_1p8>; vdd-l15-supply = <&vreg_s6c_1p8>; vdd-l17-supply = <&vreg_bob2>; qcom,pmic-id = "b"; vreg_bob1: bob1 { regulator-name = "vreg_bob1"; regulator-min-microvolt = <3296000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = ; }; vreg_bob2: bob2 { regulator-name = "vreg_bob2"; regulator-min-microvolt = <2720000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l2b_3p0: ldo2 { regulator-name = "vreg_l2b_3p0"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l5b_3p1: ldo5 { regulator-name = "vreg_l5b_3p1"; regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3104000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l6b_1p8: ldo6 { regulator-name = "vreg_l6b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l7b_1p8: ldo7 { regulator-name = "vreg_l7b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l8b_1p8: ldo8 { regulator-name = "vreg_l8b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l11b_1p2: ldo11 { regulator-name = "vreg_l11b_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1504000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l12b_1p8: ldo12 { regulator-name = "vreg_l12b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l13b_3p0: ldo13 { regulator-name = "vreg_l13b_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l14b_3p2: ldo14 { regulator-name = "vreg_l14b_3p2"; regulator-min-microvolt = <3200000>; regulator-max-microvolt = <3200000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l15b_1p8: ldo15 { regulator-name = "vreg_l15b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l16b_2p8: ldo16 { regulator-name = "vreg_l16b_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l17b_2p5: ldo17 { regulator-name = "vreg_l17b_2p5"; regulator-min-microvolt = <2504000>; regulator-max-microvolt = <2504000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; }; regulators-1 { compatible = "qcom,pm8550vs-rpmh-regulators"; vdd-l1-supply = <&vreg_s1c_1p2>; vdd-l2-supply = <&vreg_s1c_1p2>; vdd-l3-supply = <&vreg_s1c_1p2>; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; qcom,pmic-id = "c"; vreg_s1c_1p2: smps1 { regulator-name = "vreg_s1c_1p2"; regulator-min-microvolt = <1256000>; regulator-max-microvolt = <1348000>; regulator-initial-mode = ; }; vreg_s2c_0p8: smps2 { regulator-name = "vreg_s2c_0p8"; regulator-min-microvolt = <852000>; regulator-max-microvolt = <1036000>; regulator-initial-mode = ; }; vreg_s3c_0p9: smps3 { regulator-name = "vreg_s3c_0p9"; regulator-min-microvolt = <976000>; regulator-max-microvolt = <1064000>; regulator-initial-mode = ; }; vreg_s4c_1p2: smps4 { regulator-name = "vreg_s4c_1p2"; regulator-min-microvolt = <1224000>; regulator-max-microvolt = <1280000>; regulator-initial-mode = ; }; vreg_s5c_0p7: smps5 { regulator-name = "vreg_s5c_0p7"; regulator-min-microvolt = <752000>; regulator-max-microvolt = <900000>; regulator-initial-mode = ; }; vreg_s6c_1p8: smps6 { regulator-name = "vreg_s6c_1p8"; regulator-min-microvolt = <1856000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = ; }; vreg_l1c_1p2: ldo1 { regulator-name = "vreg_l1c_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l3c_1p2: ldo3 { regulator-name = "vreg_l3c_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; }; regulators-2 { compatible = "qcom,pm8550vs-rpmh-regulators"; vdd-l1-supply = <&vreg_s3c_0p9>; qcom,pmic-id = "d"; vreg_l1d_0p88: ldo1 { regulator-name = "vreg_l1d_0p88"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <920000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; }; regulators-3 { compatible = "qcom,pm8550vs-rpmh-regulators"; vdd-l3-supply = <&vreg_s3c_0p9>; qcom,pmic-id = "e"; vreg_l3e_0p9: ldo3 { regulator-name = "vreg_l3e_0p9"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <920000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; }; regulators-4 { compatible = "qcom,pm8550vs-rpmh-regulators"; vdd-l1-supply = <&vreg_s3c_0p9>; vdd-l3-supply = <&vreg_s3c_0p9>; qcom,pmic-id = "g"; vreg_l1g_0p91: ldo1 { regulator-name = "vreg_l1g_0p91"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <920000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l3g_0p91: ldo3 { regulator-name = "vreg_l3g_0p91"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; }; regulators-5 { compatible = "qcom,pm8550ve-rpmh-regulators"; vdd-l1-supply = <&vreg_s3c_0p9>; vdd-l2-supply = <&vreg_s3c_0p9>; vdd-l3-supply = <&vreg_s1c_1p2>; vdd-s4-supply = <&vph_pwr>; qcom,pmic-id = "i"; vreg_s4i_0p85: smps4 { regulator-name = "vreg_s4i_0p85"; regulator-min-microvolt = <852000>; regulator-max-microvolt = <1004000>; regulator-initial-mode = ; }; vreg_l1i_0p88: ldo1 { regulator-name = "vreg_l1i_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l2i_0p88: ldo2 { regulator-name = "vreg_l2i_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l3i_1p2: ldo3 { regulator-name = "vreg_l3i_0p91"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; }; regulators-6 { compatible = "qcom,pm8010-rpmh-regulators"; qcom,pmic-id = "m"; vdd-l1-l2-supply = <&vreg_s1c_1p2>; vdd-l3-l4-supply = <&vreg_bob2>; vdd-l5-supply = <&vreg_s6c_1p8>; vdd-l6-supply = <&vreg_bob1>; vdd-l7-supply = <&vreg_bob1>; vreg_l1m_1p1: ldo1 { regulator-name = "vreg_l1m_1p1"; regulator-min-microvolt = <1104000>; regulator-max-microvolt = <1104000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l2m_1p056: ldo2 { regulator-name = "vreg_l2m_1p056"; regulator-min-microvolt = <1056000>; regulator-max-microvolt = <1056000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l3m_2p8: ldo3 { regulator-name = "vreg_l3m_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l4m_2p8: ldo4 { regulator-name = "vreg_l4m_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l5m_1p8: ldo5 { regulator-name = "vreg_l5m_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l6m_2p8: ldo6 { regulator-name = "vreg_l6m_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l7m_2p96: ldo7 { regulator-name = "vreg_l7m_2p96"; regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; }; regulators-7 { compatible = "qcom,pm8010-rpmh-regulators"; qcom,pmic-id = "n"; vdd-l1-l2-supply = <&vreg_s1c_1p2>; vdd-l3-l4-supply = <&vreg_s6c_1p8>; vdd-l5-supply = <&vreg_bob2>; vdd-l6-supply = <&vreg_bob2>; vdd-l7-supply = <&vreg_bob1>; vreg_l1n_1p1: ldo1 { regulator-name = "vreg_l1n_1p1"; regulator-min-microvolt = <1104000>; regulator-max-microvolt = <1104000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l2n_1p056: ldo2 { regulator-name = "vreg_l2n_1p056"; regulator-min-microvolt = <1056000>; regulator-max-microvolt = <1056000>; regulator-initial-mode = ; regulator-allow-set-load; regulator-allowed-modes = ; }; vreg_l3n_1p8: ldo3 { regulator-name = "vreg_l3n_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l4n_1p8: ldo4 { regulator-name = "vreg_l4n_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l5n_2p8: ldo5 { regulator-name = "vreg_l5n_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l6n_2p8: ldo6 { regulator-name = "vreg_l6n_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l7n_3p3: ldo7 { regulator-name = "vreg_l7n_3p3"; regulator-min-microvolt = <3304000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = ; }; }; }; &dispcc { status = "okay"; }; &gpi_dma1 { status = "okay"; }; &i2c3 { status = "okay"; wcd_usbss: typec-mux@e { compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; reg = <0xe>; vdd-supply = <&vreg_l15b_1p8>; reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; mode-switch; orientation-switch; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; wcd_usbss_sbu_mux: endpoint { remote-endpoint = <&pmic_glink_sbu>; }; }; port@1 { reg = <1>; wcd_usbss_headset_out: endpoint { remote-endpoint = <&wcd_codec_headset_in>; }; }; }; }; }; &i2c6 { status = "okay"; typec-mux@1c { compatible = "onnn,nb7vpq904m"; reg = <0x1c>; vcc-supply = <&vreg_l15b_1p8>; retimer-switch; orientation-switch; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; redriver_ss_out: endpoint { remote-endpoint = <&pmic_glink_ss_in>; }; }; port@1 { reg = <1>; redriver_ss_in: endpoint { data-lanes = <3 2 1 0>; remote-endpoint = <&usb_dp_qmpphy_out>; }; }; }; }; }; &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sm8650/ipa_fws.mbn"; status = "okay"; }; &gpu { status = "okay"; zap-shader { firmware-name = "qcom/sm8650/gen70900_zap.mbn"; }; }; &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio21"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; }; &mdss { status = "okay"; }; &mdss_dsi0 { vdda-supply = <&vreg_l3i_1p2>; status = "okay"; panel@0 { compatible = "visionox,vtdr6130"; reg = <0>; reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; vddio-supply = <&vreg_l12b_1p8>; vci-supply = <&vreg_l13b_3p0>; vdd-supply = <&vreg_l11b_1p2>; pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; pinctrl-names = "default", "sleep"; port { panel0_in: endpoint { remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; &mdss_dsi0_out { remote-endpoint = <&panel0_in>; data-lanes = <0 1 2 3>; }; &mdss_dsi0_phy { vdds-supply = <&vreg_l1i_0p88>; status = "okay"; }; &mdss_dp0 { status = "okay"; }; &mdss_dp0_out { data-lanes = <0 1>; }; &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; status = "okay"; }; &pcieport0 { wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; vddaon-supply = <&vreg_pmu_aon_0p59>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; }; }; &pcie0_phy { vdda-phy-supply = <&vreg_l1i_0p88>; vdda-pll-supply = <&vreg_l3i_1p2>; status = "okay"; }; &pon_pwrkey { status = "okay"; }; &pon_resin { linux,code = ; status = "okay"; }; &pm8550_flash { status = "okay"; led-0 { function = LED_FUNCTION_FLASH; color = ; led-sources = <1>, <4>; led-max-microamp = <500000>; flash-max-microamp = <2000000>; flash-max-timeout-us = <1280000>; function-enumerator = <0>; }; led-1 { function = LED_FUNCTION_FLASH; color = ; led-sources = <2>, <3>; led-max-microamp = <500000>; flash-max-microamp = <2000000>; flash-max-timeout-us = <1280000>; function-enumerator = <1>; }; }; &pm8550_gpios { volume_up_n: volume-up-n-state { pins = "gpio6"; function = "normal"; bias-pull-up; input-enable; power-source = <1>; }; }; &pm8550_pwm { status = "okay"; multi-led { color = ; function = LED_FUNCTION_STATUS; #address-cells = <1>; #size-cells = <0>; led@1 { reg = <1>; color = ; }; led@2 { reg = <2>; color = ; }; led@3 { reg = <3>; color = ; }; }; }; &pm8550b_eusb2_repeater { vdd18-supply = <&vreg_l15b_1p8>; vdd3-supply = <&vreg_l5b_3p1>; }; &pmk8550_rtc { status = "okay"; }; &qup_i2c3_data_clk { /* Use internal I2C pull-up */ bias-pull-up = <2200>; }; &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; &remoteproc_adsp { firmware-name = "qcom/sm8650/adsp.mbn", "qcom/sm8650/adsp_dtb.mbn"; status = "okay"; }; &remoteproc_cdsp { firmware-name = "qcom/sm8650/cdsp.mbn", "qcom/sm8650/cdsp_dtb.mbn"; status = "okay"; }; &remoteproc_mpss { firmware-name = "qcom/sm8650/modem.mbn", "qcom/sm8650/modem_dtb.mbn"; status = "okay"; }; &sleep_clk { clock-frequency = <32000>; }; &spi4 { status = "okay"; touchscreen@0 { compatible = "goodix,gt9916"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <162 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; avdd-supply = <&vreg_l14b_3p2>; spi-max-frequency = <1000000>; touchscreen-size-x = <1080>; touchscreen-size-y = <2400>; pinctrl-0 = <&ts_irq>, <&ts_reset>; pinctrl-names = "default"; }; }; &swr0 { status = "okay"; /* WSA8845, Speaker Left */ left_spkr: speaker@0,0 { compatible = "sdw20217020400"; reg = <0 0>; pinctrl-0 = <&spkr_1_sd_n_active>; pinctrl-names = "default"; powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; /* * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) */ qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker Right */ right_spkr: speaker@0,1 { compatible = "sdw20217020400"; reg = <0 1>; pinctrl-0 = <&spkr_2_sd_n_active>; pinctrl-names = "default"; powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; /* * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) */ qcom,port-mapping = <4 5 6 7 11 13>; }; }; &swr1 { status = "okay"; /* WCD9395 RX */ wcd_rx: codec@0,4 { compatible = "sdw20217010e00"; reg = <0 4>; /* * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) */ qcom,rx-port-mapping = <1 2 3 4 5 9>; }; }; &swr2 { status = "okay"; /* WCD9395 TX */ wcd_tx: codec@0,3 { compatible = "sdw20217010e00"; reg = <0 3>; /* * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) */ qcom,tx-port-mapping = <2 2 3 4>; }; }; &tlmm { /* Reserved I/Os for NFC */ gpio-reserved-ranges = <32 8>, <74 1>; bt_default: bt-default-state { bt-en-pins { pins = "gpio17"; function = "gpio"; drive-strength = <16>; bias-disable; }; sw-ctrl-pins { pins = "gpio18"; function = "gpio"; bias-pull-down; }; }; disp0_reset_n_active: disp0-reset-n-active-state { pins = "gpio133"; function = "gpio"; drive-strength = <8>; bias-disable; }; disp0_reset_n_suspend: disp0-reset-n-suspend-state { pins = "gpio133"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; mdp_vsync_active: mdp-vsync-active-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; mdp_vsync_suspend: mdp-vsync-suspend-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; spkr_2_sd_n_active: spkr-2-sd-n-active-state { pins = "gpio77"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; ts_irq: ts-irq-state { pins = "gpio161"; function = "gpio"; drive-strength = <8>; bias-pull-up; output-disable; }; ts_reset: ts-reset-state { pins = "gpio162"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; wcd_default: wcd-reset-n-active-state { pins = "gpio107"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; wlan_en: wlan-en-state { pins = "gpio16"; function = "gpio"; drive-strength = <8>; bias-pull-down; }; }; &uart14 { status = "okay"; bluetooth { compatible = "qcom,wcn7850-bt"; vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; vddaon-supply = <&vreg_pmu_aon_0p59>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; max-speed = <3200000>; }; }; &uart15 { status = "okay"; }; &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1c_1p2>; vccq-max-microamp = <1200000>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l1d_0p88>; vdda-pll-supply = <&vreg_l3i_1p2>; status = "okay"; }; /* * DPAUX -> WCD9395 -> USB_SBU -> USB-C * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C * USB SS -> NB7VPQ904MMUTWG -> USB-C */ &usb_1 { status = "okay"; }; &usb_1_dwc3 { dr_mode = "otg"; usb-role-switch; }; &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1i_0p88>; vdda12-supply = <&vreg_l3i_1p2>; phys = <&pm8550b_eusb2_repeater>; status = "okay"; }; &usb_dp_qmpphy { vdda-phy-supply = <&vreg_l3i_1p2>; vdda-pll-supply = <&vreg_l3g_0p91>; status = "okay"; }; &usb_dp_qmpphy_out { remote-endpoint = <&redriver_ss_in>; }; &xo_board { clock-frequency = <76800000>; };