// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2023 Linaro Limited */ /dts-v1/; #include #include #include "sm8550.dtsi" #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" #define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" #include "pmr735d_a.dtsi" #include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 QRD"; compatible = "qcom,sm8550-qrd", "qcom,sm8550"; chassis-type = "handset"; aliases { serial0 = &uart7; serial1 = &uart14; }; wcd938x: audio-codec { compatible = "qcom,wcd9385-codec"; pinctrl-names = "default"; pinctrl-0 = <&wcd_default>; qcom,micbias1-microvolt = <1800000>; qcom,micbias2-microvolt = <1800000>; qcom,micbias3-microvolt = <1800000>; qcom,micbias4-microvolt = <1800000>; qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; qcom,rx-device = <&wcd_rx>; qcom,tx-device = <&wcd_tx>; reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; vdd-buck-supply = <&vreg_l15b_1p8>; vdd-rxtx-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l15b_1p8>; vdd-mic-bias-supply = <&vreg_bob1>; #sound-dai-cells = <1>; }; chosen { stdout-path = "serial0:115200n8"; }; gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&volume_up_n>; pinctrl-names = "default"; key-volume-up { label = "Volume Up"; linux,code = ; gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; wakeup-source; }; }; pmic-glink { compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; reg = <0>; power-role = "dual"; data-role = "dual"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; pmic_glink_hs_in: endpoint { remote-endpoint = <&usb_1_dwc3_hs>; }; }; port@1 { reg = <1>; pmic_glink_ss_in: endpoint { remote-endpoint = <&redriver_ss_out>; }; }; port@2 { reg = <2>; pmic_glink_sbu: endpoint { remote-endpoint = <&fsa4480_sbu_mux>; }; }; }; }; }; sound { compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; model = "SM8550-QRD"; audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", "AMIC1", "MIC BIAS1", "AMIC2", "MIC BIAS2", "AMIC3", "MIC BIAS3", "AMIC4", "MIC BIAS3", "AMIC5", "MIC BIAS4", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "TX DMIC0", "MIC BIAS1", "TX DMIC1", "MIC BIAS2", "TX DMIC2", "MIC BIAS3", "TX SWR_INPUT0", "ADC1_OUTPUT", "TX SWR_INPUT1", "ADC2_OUTPUT", "TX SWR_INPUT0", "ADC3_OUTPUT", "TX SWR_INPUT1", "ADC4_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; cpu { sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; }; codec { sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wcd-capture-dai-link { link-name = "WCD Capture"; cpu { sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; }; codec { sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wsa-dai-link { link-name = "WSA Playback"; cpu { sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; }; codec { sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; }; platform { sound-dai = <&q6apm>; }; }; va-dai-link { link-name = "VA Capture"; cpu { sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; }; codec { sound-dai = <&lpass_vamacro 0>; }; platform { sound-dai = <&q6apm>; }; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; regulator-boot-on; }; wcn7850-pmu { compatible = "qcom,wcn7850-pmu"; pinctrl-names = "default"; pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>; wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; vdd-supply = <&vreg_s5g_0p85>; vddio-supply = <&vreg_l15b_1p8>; vddaon-supply = <&vreg_s2g_0p85>; vdddig-supply = <&vreg_s4e_0p95>; vddrfa1p2-supply = <&vreg_s4g_1p25>; vddrfa1p8-supply = <&vreg_s6g_1p86>; regulators { vreg_pmu_rfa_cmn: ldo0 { regulator-name = "vreg_pmu_rfa_cmn"; }; vreg_pmu_aon_0p59: ldo1 { regulator-name = "vreg_pmu_aon_0p59"; }; vreg_pmu_wlcx_0p8: ldo2 { regulator-name = "vreg_pmu_wlcx_0p8"; }; vreg_pmu_wlmx_0p85: ldo3 { regulator-name = "vreg_pmu_wlmx_0p85"; }; vreg_pmu_btcmx_0p85: ldo4 { regulator-name = "vreg_pmu_btcmx_0p85"; }; vreg_pmu_rfa_0p8: ldo5 { regulator-name = "vreg_pmu_rfa_0p8"; }; vreg_pmu_rfa_1p2: ldo6 { regulator-name = "vreg_pmu_rfa_1p2"; }; vreg_pmu_rfa_1p8: ldo7 { regulator-name = "vreg_pmu_rfa_1p8"; }; vreg_pmu_pcie_0p9: ldo8 { regulator-name = "vreg_pmu_pcie_0p9"; }; vreg_pmu_pcie_1p8: ldo9 { regulator-name = "vreg_pmu_pcie_1p8"; }; }; }; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8550-rpmh-regulators"; qcom,pmic-id = "b"; vdd-bob1-supply = <&vph_pwr>; vdd-bob2-supply = <&vph_pwr>; vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; vdd-l2-l13-l14-supply = <&vreg_bob1>; vdd-l3-supply = <&vreg_s4g_1p25>; vdd-l5-l16-supply = <&vreg_bob1>; vdd-l6-l7-supply = <&vreg_bob1>; vdd-l8-l9-supply = <&vreg_bob1>; vdd-l11-supply = <&vreg_s4g_1p25>; vdd-l12-supply = <&vreg_s6g_1p86>; vdd-l15-supply = <&vreg_s6g_1p86>; vdd-l17-supply = <&vreg_bob2>; vreg_bob1: bob1 { regulator-name = "vreg_bob1"; regulator-min-microvolt = <3296000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = ; }; vreg_bob2: bob2 { regulator-name = "vreg_bob2"; regulator-min-microvolt = <2720000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = ; }; vreg_l1b_1p8: ldo1 { regulator-name = "vreg_l1b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l2b_3p0: ldo2 { regulator-name = "vreg_l2b_3p0"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l5b_3p1: ldo5 { regulator-name = "vreg_l5b_3p1"; regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3104000>; regulator-initial-mode = ; }; vreg_l6b_1p8: ldo6 { regulator-name = "vreg_l6b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l7b_1p8: ldo7 { regulator-name = "vreg_l7b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l8b_1p8: ldo8 { regulator-name = "vreg_l8b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l9b_2p9: ldo9 { regulator-name = "vreg_l9b_2p9"; regulator-min-microvolt = <2960000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l11b_1p2: ldo11 { regulator-name = "vreg_l11b_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1504000>; regulator-initial-mode = ; }; vreg_l12b_1p8: ldo12 { regulator-name = "vreg_l12b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l13b_3p0: ldo13 { regulator-name = "vreg_l13b_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = ; }; vreg_l14b_3p2: ldo14 { regulator-name = "vreg_l14b_3p2"; regulator-min-microvolt = <3200000>; regulator-max-microvolt = <3200000>; regulator-initial-mode = ; }; vreg_l15b_1p8: ldo15 { regulator-name = "vreg_l15b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l16b_2p8: ldo16 { regulator-name = "vreg_l16b_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l17b_2p5: ldo17 { regulator-name = "vreg_l17b_2p5"; regulator-min-microvolt = <2504000>; regulator-max-microvolt = <2504000>; regulator-initial-mode = ; }; }; regulators-1 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "c"; vdd-l1-supply = <&vreg_s4g_1p25>; vdd-l2-supply = <&vreg_s4e_0p95>; vdd-l3-supply = <&vreg_s4e_0p95>; vreg_l3c_0p9: ldo3 { regulator-name = "vreg_l3c_0p9"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; }; regulators-2 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "d"; vdd-l1-supply = <&vreg_s4e_0p95>; vdd-l2-supply = <&vreg_s4e_0p95>; vdd-l3-supply = <&vreg_s4e_0p95>; vreg_l1d_0p88: ldo1 { regulator-name = "vreg_l1d_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <920000>; regulator-initial-mode = ; }; /* ldo2 supplies SM8550 VDD_LPI_MX */ }; regulators-3 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "e"; vdd-l1-supply = <&vreg_s4e_0p95>; vdd-l2-supply = <&vreg_s4e_0p95>; vdd-l3-supply = <&vreg_s4g_1p25>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vreg_s4e_0p95: smps4 { regulator-name = "vreg_s4e_0p95"; regulator-min-microvolt = <904000>; regulator-max-microvolt = <984000>; regulator-initial-mode = ; }; vreg_s5e_1p08: smps5 { regulator-name = "vreg_s5e_1p08"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1120000>; regulator-initial-mode = ; }; vreg_l1e_0p88: ldo1 { regulator-name = "vreg_l1e_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; }; vreg_l2e_0p9: ldo2 { regulator-name = "vreg_l2e_0p9"; regulator-min-microvolt = <904000>; regulator-max-microvolt = <970000>; regulator-initial-mode = ; }; vreg_l3e_1p2: ldo3 { regulator-name = "vreg_l3e_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; }; regulators-4 { compatible = "qcom,pm8550ve-rpmh-regulators"; qcom,pmic-id = "f"; vdd-l1-supply = <&vreg_s4e_0p95>; vdd-l2-supply = <&vreg_s4e_0p95>; vdd-l3-supply = <&vreg_s4e_0p95>; vdd-s4-supply = <&vph_pwr>; vreg_s4f_0p5: smps4 { regulator-name = "vreg_s4f_0p5"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <700000>; regulator-initial-mode = ; }; vreg_l1f_0p9: ldo1 { regulator-name = "vreg_l1f_0p9"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l2f_0p88: ldo2 { regulator-name = "vreg_l2f_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l3f_0p88: ldo3 { regulator-name = "vreg_l3f_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; }; regulators-5 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "g"; vdd-l1-supply = <&vreg_s4g_1p25>; vdd-l2-supply = <&vreg_s4g_1p25>; vdd-l3-supply = <&vreg_s4g_1p25>; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vreg_s1g_1p25: smps1 { regulator-name = "vreg_s1g_1p25"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1300000>; regulator-initial-mode = ; }; vreg_s2g_0p85: smps2 { regulator-name = "vreg_s2g_0p85"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; regulator-initial-mode = ; }; vreg_s3g_0p8: smps3 { regulator-name = "vreg_s3g_0p8"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1004000>; regulator-initial-mode = ; }; vreg_s4g_1p25: smps4 { regulator-name = "vreg_s4g_1p25"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1352000>; regulator-initial-mode = ; }; vreg_s5g_0p85: smps5 { regulator-name = "vreg_s5g_0p85"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1004000>; regulator-initial-mode = ; }; vreg_s6g_1p86: smps6 { regulator-name = "vreg_s6g_1p86"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = ; }; vreg_l1g_1p2: ldo1 { regulator-name = "vreg_l1g_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l3g_1p2: ldo3 { regulator-name = "vreg_l3g_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; }; regulators-6 { compatible = "qcom,pm8010-rpmh-regulators"; qcom,pmic-id = "m"; vdd-l1-l2-supply = <&vreg_s4g_1p25>; vdd-l3-l4-supply = <&vreg_bob2>; vdd-l5-supply = <&vreg_s6g_1p86>; vdd-l6-supply = <&vreg_s6g_1p86>; vdd-l7-supply = <&vreg_bob1>; vreg_l1m_1p056: ldo1 { regulator-name = "vreg_l1m_1p056"; regulator-min-microvolt = <1056000>; regulator-max-microvolt = <1056000>; regulator-initial-mode = ; }; vreg_l2m_1p056: ldo2 { regulator-name = "vreg_l2m_1p056"; regulator-min-microvolt = <1056000>; regulator-max-microvolt = <1056000>; regulator-initial-mode = ; }; vreg_l3m_2p8: ldo3 { regulator-name = "vreg_l3m_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l4m_2p8: ldo4 { regulator-name = "vreg_l4m_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l5m_1p8: ldo5 { regulator-name = "vreg_l5m_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l6m_1p8: ldo6 { regulator-name = "vreg_l6m_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l7m_2p9: ldo7 { regulator-name = "vreg_l7m_2p9"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2904000>; regulator-initial-mode = ; }; }; regulators-7 { compatible = "qcom,pm8010-rpmh-regulators"; qcom,pmic-id = "n"; vdd-l1-l2-supply = <&vreg_s4g_1p25>; vdd-l3-l4-supply = <&vreg_bob2>; vdd-l5-supply = <&vreg_s6g_1p86>; vdd-l6-supply = <&vreg_bob1>; vdd-l7-supply = <&vreg_bob1>; vreg_l1n_1p1: ldo1 { regulator-name = "vreg_l1n_1p1"; regulator-min-microvolt = <1104000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l2n_1p1: ldo2 { regulator-name = "vreg_l2n_1p1"; regulator-min-microvolt = <1104000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l3n_2p8: ldo3 { regulator-name = "vreg_l3n_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = ; }; vreg_l4n_2p8: ldo4 { regulator-name = "vreg_l4n_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = ; }; vreg_l5n_1p8: ldo5 { regulator-name = "vreg_l5n_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l6n_3p3: ldo6 { regulator-name = "vreg_l6n_3p3"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = ; }; vreg_l7n_2p96: ldo7 { regulator-name = "vreg_l7n_2p96"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = ; }; }; }; &i2c_master_hub_0 { status = "okay"; }; &i2c_hub_2 { status = "okay"; typec-retimer@1c { compatible = "onnn,nb7vpq904m"; reg = <0x1c>; vcc-supply = <&vreg_l15b_1p8>; retimer-switch; orientation-switch; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; redriver_ss_out: endpoint { remote-endpoint = <&pmic_glink_ss_in>; }; }; port@1 { reg = <1>; redriver_ss_in: endpoint { data-lanes = <3 2 1 0>; remote-endpoint = <&usb_dp_qmpphy_out>; }; }; }; }; typec-mux@42 { compatible = "fcs,fsa4480"; reg = <0x42>; vcc-supply = <&vreg_bob1>; mode-switch; orientation-switch; port { fsa4480_sbu_mux: endpoint { remote-endpoint = <&pmic_glink_sbu>; }; }; }; }; &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sm8550/ipa_fws.mbn"; status = "okay"; }; &gpi_dma1 { status = "okay"; }; &gpu { status = "okay"; zap-shader { firmware-name = "qcom/sm8550/a740_zap.mbn"; }; }; &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio17"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; spkr_2_sd_n_active: spkr-2-sd-n-active-state { pins = "gpio18"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; }; &mdss { status = "okay"; }; &mdss_dsi0 { vdda-supply = <&vreg_l3e_1p2>; status = "okay"; panel@0 { compatible = "visionox,vtdr6130"; reg = <0>; pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; pinctrl-names = "default", "sleep"; vci-supply = <&vreg_l13b_3p0>; vdd-supply = <&vreg_l11b_1p2>; vddio-supply = <&vreg_l12b_1p8>; reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; port { panel0_in: endpoint { remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; &mdss_dsi0_out { remote-endpoint = <&panel0_in>; data-lanes = <0 1 2 3>; }; &mdss_dsi0_phy { vdds-supply = <&vreg_l1e_0p88>; status = "okay"; }; &mdss_dp0 { status = "okay"; }; &mdss_dp0_out { data-lanes = <0 1>; }; &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; status = "okay"; }; &pcieport0 { wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; vddaon-supply = <&vreg_pmu_aon_0p59>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; }; }; &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; status = "okay"; }; &pm8550_flash { status = "okay"; led-0 { function = LED_FUNCTION_FLASH; color = ; led-sources = <1>, <4>; led-max-microamp = <500000>; flash-max-microamp = <2000000>; flash-max-timeout-us = <1280000>; function-enumerator = <0>; }; led-1 { function = LED_FUNCTION_FLASH; color = ; led-sources = <2>, <3>; led-max-microamp = <500000>; flash-max-microamp = <2000000>; flash-max-timeout-us = <1280000>; function-enumerator = <1>; }; }; &pm8550_gpios { volume_up_n: volume-up-n-state { pins = "gpio6"; function = "normal"; power-source = <1>; bias-pull-up; input-enable; }; }; &pm8550_pwm { status = "okay"; multi-led { color = ; function = LED_FUNCTION_STATUS; #address-cells = <1>; #size-cells = <0>; led@1 { reg = <1>; color = ; }; led@2 { reg = <2>; color = ; }; led@3 { reg = <3>; color = ; }; }; }; &pm8550b_eusb2_repeater { vdd18-supply = <&vreg_l15b_1p8>; vdd3-supply = <&vreg_l5b_3p1>; }; &pon_pwrkey { status = "okay"; }; &pon_resin { linux,code = ; status = "okay"; }; &pmk8550_gpios { pmk8550_sleep_clk: sleep-clk-state { pins = "gpio3"; function = "func1"; input-disable; output-enable; bias-disable; power-source = <0>; }; }; &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; &remoteproc_adsp { firmware-name = "qcom/sm8550/adsp.mbn", "qcom/sm8550/adsp_dtb.mbn"; status = "okay"; }; &remoteproc_cdsp { firmware-name = "qcom/sm8550/cdsp.mbn", "qcom/sm8550/cdsp_dtb.mbn"; status = "okay"; }; &remoteproc_mpss { firmware-name = "qcom/sm8550/modem.mbn", "qcom/sm8550/modem_dtb.mbn"; status = "okay"; }; &sleep_clk { clock-frequency = <32000>; }; &swr0 { status = "okay"; /* WSA8845, Speaker North */ north_spkr: speaker@0,0 { compatible = "sdw20217020400"; reg = <0 0>; pinctrl-names = "default"; pinctrl-0 = <&spkr_1_sd_n_active>; powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker South */ south_spkr: speaker@0,1 { compatible = "sdw20217020400"; reg = <0 1>; pinctrl-names = "default"; pinctrl-0 = <&spkr_2_sd_n_active>; powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; qcom,port-mapping = <4 5 6 7 11 13>; }; }; &spi4 { status = "okay"; touchscreen@0 { compatible = "goodix,gt9916"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; avdd-supply = <&vreg_l14b_3p2>; spi-max-frequency = <1000000>; touchscreen-size-x = <1080>; touchscreen-size-y = <2400>; pinctrl-names = "default"; pinctrl-0 = <&ts_irq>, <&ts_reset>; }; }; &swr1 { status = "okay"; /* WCD9385 RX */ wcd_rx: codec@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; &swr2 { status = "okay"; /* WCD9385 TX */ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; qcom,tx-port-mapping = <2 2 3 4>; }; }; &tlmm { gpio-reserved-ranges = <32 8>; bt_default: bt-default-state { bt-en-pins { pins = "gpio81"; function = "gpio"; drive-strength = <16>; bias-disable; }; sw-ctrl-pins { pins = "gpio82"; function = "gpio"; bias-pull-down; }; }; sde_dsi_active: sde-dsi-active-state { pins = "gpio133"; function = "gpio"; drive-strength = <8>; bias-disable; }; sde_dsi_suspend: sde-dsi-suspend-state { pins = "gpio133"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; sde_te_active: sde-te-active-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; sde_te_suspend: sde-te-suspend-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; ts_irq: ts-irq-state { pins = "gpio25"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; ts_reset: ts-reset-state { pins = "gpio24"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; wcd_default: wcd-reset-n-active-state { pins = "gpio108"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; wlan_en: wlan-en-state { pins = "gpio80"; function = "gpio"; drive-strength = <8>; bias-pull-down; }; }; &uart7 { status = "okay"; }; &uart14 { status = "okay"; bluetooth { compatible = "qcom,wcn7850-bt"; vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; vddaon-supply = <&vreg_pmu_aon_0p59>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; max-speed = <3200000>; }; }; &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l1d_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; status = "okay"; }; &usb_1 { status = "okay"; }; &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; phys = <&pm8550b_eusb2_repeater>; status = "okay"; }; &usb_dp_qmpphy { vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p88>; status = "okay"; }; &usb_dp_qmpphy_out { remote-endpoint = <&redriver_ss_in>; }; &xo_board { clock-frequency = <76800000>; };