// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2020, The Linux Foundation. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include / { interrupt-parent = <&intc>; #address-cells = <2>; #size-cells = <2>; aliases { i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; i2c7 = &i2c7; i2c8 = &i2c8; i2c9 = &i2c9; i2c10 = &i2c10; i2c11 = &i2c11; i2c12 = &i2c12; i2c13 = &i2c13; i2c14 = &i2c14; i2c15 = &i2c15; i2c16 = &i2c16; i2c17 = &i2c17; i2c18 = &i2c18; i2c19 = &i2c19; spi0 = &spi0; spi1 = &spi1; spi2 = &spi2; spi3 = &spi3; spi4 = &spi4; spi5 = &spi5; spi6 = &spi6; spi7 = &spi7; spi8 = &spi8; spi9 = &spi9; spi10 = &spi10; spi11 = &spi11; spi12 = &spi12; spi13 = &spi13; spi14 = &spi14; spi15 = &spi15; spi16 = &spi16; spi17 = &spi17; spi18 = &spi18; spi19 = &spi19; }; chosen { }; clocks { xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <38400000>; clock-output-names = "xo_board"; }; sleep_clk: sleep-clk { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>; }; }; cpus { #address-cells = <2>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <105>; next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x20000>; cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; cache-level = <3>; cache-size = <0x400000>; cache-unified; }; }; }; CPU1: cpu@100 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <105>; next-level-cache = <&L2_100>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x20000>; cache-unified; next-level-cache = <&L3_0>; }; }; CPU2: cpu@200 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <105>; next-level-cache = <&L2_200>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x20000>; cache-unified; next-level-cache = <&L3_0>; }; }; CPU3: cpu@300 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <105>; next-level-cache = <&L2_300>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x20000>; cache-unified; next-level-cache = <&L3_0>; }; }; CPU4: cpu@400 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; next-level-cache = <&L2_400>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x40000>; cache-unified; next-level-cache = <&L3_0>; }; }; CPU5: cpu@500 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; next-level-cache = <&L2_500>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x40000>; cache-unified; next-level-cache = <&L3_0>; }; }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; next-level-cache = <&L2_600>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x40000>; cache-unified; next-level-cache = <&L3_0>; }; }; CPU7: cpu@700 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <444>; next-level-cache = <&L2_700>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x80000>; cache-unified; next-level-cache = <&L3_0>; }; }; cpu-map { cluster0 { core0 { cpu = <&CPU0>; }; core1 { cpu = <&CPU1>; }; core2 { cpu = <&CPU2>; }; core3 { cpu = <&CPU3>; }; core4 { cpu = <&CPU4>; }; core5 { cpu = <&CPU5>; }; core6 { cpu = <&CPU6>; }; core7 { cpu = <&CPU7>; }; }; }; idle-states { entry-method = "psci"; LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; idle-state-name = "silver-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; entry-latency-us = <360>; exit-latency-us = <531>; min-residency-us = <3934>; local-timer-stop; }; BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; idle-state-name = "gold-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; entry-latency-us = <702>; exit-latency-us = <1061>; min-residency-us = <4488>; local-timer-stop; }; }; domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3264>; exit-latency-us = <6562>; min-residency-us = <9987>; }; }; }; qup_virt: interconnect-qup-virt { compatible = "qcom,sm8250-qup-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; cpu0_opp1: opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-peak-kBps = <800000 9600000>; }; cpu0_opp2: opp-403200000 { opp-hz = /bits/ 64 <403200000>; opp-peak-kBps = <800000 9600000>; }; cpu0_opp3: opp-518400000 { opp-hz = /bits/ 64 <518400000>; opp-peak-kBps = <800000 16588800>; }; cpu0_opp4: opp-614400000 { opp-hz = /bits/ 64 <614400000>; opp-peak-kBps = <800000 16588800>; }; cpu0_opp5: opp-691200000 { opp-hz = /bits/ 64 <691200000>; opp-peak-kBps = <800000 19660800>; }; cpu0_opp6: opp-787200000 { opp-hz = /bits/ 64 <787200000>; opp-peak-kBps = <1804000 19660800>; }; cpu0_opp7: opp-883200000 { opp-hz = /bits/ 64 <883200000>; opp-peak-kBps = <1804000 23347200>; }; cpu0_opp8: opp-979200000 { opp-hz = /bits/ 64 <979200000>; opp-peak-kBps = <1804000 26419200>; }; cpu0_opp9: opp-1075200000 { opp-hz = /bits/ 64 <1075200000>; opp-peak-kBps = <1804000 29491200>; }; cpu0_opp10: opp-1171200000 { opp-hz = /bits/ 64 <1171200000>; opp-peak-kBps = <1804000 32563200>; }; cpu0_opp11: opp-1248000000 { opp-hz = /bits/ 64 <1248000000>; opp-peak-kBps = <1804000 36249600>; }; cpu0_opp12: opp-1344000000 { opp-hz = /bits/ 64 <1344000000>; opp-peak-kBps = <2188000 36249600>; }; cpu0_opp13: opp-1420800000 { opp-hz = /bits/ 64 <1420800000>; opp-peak-kBps = <2188000 39321600>; }; cpu0_opp14: opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-peak-kBps = <3072000 42393600>; }; cpu0_opp15: opp-1612800000 { opp-hz = /bits/ 64 <1612800000>; opp-peak-kBps = <3072000 42393600>; }; cpu0_opp16: opp-1708800000 { opp-hz = /bits/ 64 <1708800000>; opp-peak-kBps = <4068000 42393600>; }; cpu0_opp17: opp-1804800000 { opp-hz = /bits/ 64 <1804800000>; opp-peak-kBps = <4068000 42393600>; }; }; cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; cpu4_opp1: opp-710400000 { opp-hz = /bits/ 64 <710400000>; opp-peak-kBps = <1804000 19660800>; }; cpu4_opp2: opp-825600000 { opp-hz = /bits/ 64 <825600000>; opp-peak-kBps = <2188000 23347200>; }; cpu4_opp3: opp-940800000 { opp-hz = /bits/ 64 <940800000>; opp-peak-kBps = <2188000 26419200>; }; cpu4_opp4: opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-peak-kBps = <3072000 26419200>; }; cpu4_opp5: opp-1171200000 { opp-hz = /bits/ 64 <1171200000>; opp-peak-kBps = <3072000 29491200>; }; cpu4_opp6: opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; opp-peak-kBps = <4068000 29491200>; }; cpu4_opp7: opp-1382400000 { opp-hz = /bits/ 64 <1382400000>; opp-peak-kBps = <4068000 32563200>; }; cpu4_opp8: opp-1478400000 { opp-hz = /bits/ 64 <1478400000>; opp-peak-kBps = <4068000 32563200>; }; cpu4_opp9: opp-1574400000 { opp-hz = /bits/ 64 <1574400000>; opp-peak-kBps = <5412000 39321600>; }; cpu4_opp10: opp-1670400000 { opp-hz = /bits/ 64 <1670400000>; opp-peak-kBps = <5412000 42393600>; }; cpu4_opp11: opp-1766400000 { opp-hz = /bits/ 64 <1766400000>; opp-peak-kBps = <5412000 45465600>; }; cpu4_opp12: opp-1862400000 { opp-hz = /bits/ 64 <1862400000>; opp-peak-kBps = <6220000 45465600>; }; cpu4_opp13: opp-1958400000 { opp-hz = /bits/ 64 <1958400000>; opp-peak-kBps = <6220000 48537600>; }; cpu4_opp14: opp-2054400000 { opp-hz = /bits/ 64 <2054400000>; opp-peak-kBps = <7216000 48537600>; }; cpu4_opp15: opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; opp-peak-kBps = <7216000 51609600>; }; cpu4_opp16: opp-2246400000 { opp-hz = /bits/ 64 <2246400000>; opp-peak-kBps = <7216000 51609600>; }; cpu4_opp17: opp-2342400000 { opp-hz = /bits/ 64 <2342400000>; opp-peak-kBps = <8368000 51609600>; }; cpu4_opp18: opp-2419200000 { opp-hz = /bits/ 64 <2419200000>; opp-peak-kBps = <8368000 51609600>; }; }; cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; cpu7_opp1: opp-844800000 { opp-hz = /bits/ 64 <844800000>; opp-peak-kBps = <2188000 19660800>; }; cpu7_opp2: opp-960000000 { opp-hz = /bits/ 64 <960000000>; opp-peak-kBps = <2188000 26419200>; }; cpu7_opp3: opp-1075200000 { opp-hz = /bits/ 64 <1075200000>; opp-peak-kBps = <3072000 26419200>; }; cpu7_opp4: opp-1190400000 { opp-hz = /bits/ 64 <1190400000>; opp-peak-kBps = <3072000 29491200>; }; cpu7_opp5: opp-1305600000 { opp-hz = /bits/ 64 <1305600000>; opp-peak-kBps = <4068000 32563200>; }; cpu7_opp6: opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; opp-peak-kBps = <4068000 32563200>; }; cpu7_opp7: opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-peak-kBps = <4068000 36249600>; }; cpu7_opp8: opp-1632000000 { opp-hz = /bits/ 64 <1632000000>; opp-peak-kBps = <5412000 39321600>; }; cpu7_opp9: opp-1747200000 { opp-hz = /bits/ 64 <1708800000>; opp-peak-kBps = <5412000 42393600>; }; cpu7_opp10: opp-1862400000 { opp-hz = /bits/ 64 <1862400000>; opp-peak-kBps = <6220000 45465600>; }; cpu7_opp11: opp-1977600000 { opp-hz = /bits/ 64 <1977600000>; opp-peak-kBps = <6220000 48537600>; }; cpu7_opp12: opp-2073600000 { opp-hz = /bits/ 64 <2073600000>; opp-peak-kBps = <7216000 48537600>; }; cpu7_opp13: opp-2169600000 { opp-hz = /bits/ 64 <2169600000>; opp-peak-kBps = <7216000 51609600>; }; cpu7_opp14: opp-2265600000 { opp-hz = /bits/ 64 <2265600000>; opp-peak-kBps = <7216000 51609600>; }; cpu7_opp15: opp-2361600000 { opp-hz = /bits/ 64 <2361600000>; opp-peak-kBps = <8368000 51609600>; }; cpu7_opp16: opp-2457600000 { opp-hz = /bits/ 64 <2457600000>; opp-peak-kBps = <8368000 51609600>; }; cpu7_opp17: opp-2553600000 { opp-hz = /bits/ 64 <2553600000>; opp-peak-kBps = <8368000 51609600>; }; cpu7_opp18: opp-2649600000 { opp-hz = /bits/ 64 <2649600000>; opp-peak-kBps = <8368000 51609600>; }; cpu7_opp19: opp-2745600000 { opp-hz = /bits/ 64 <2745600000>; opp-peak-kBps = <8368000 51609600>; }; cpu7_opp20: opp-2841600000 { opp-hz = /bits/ 64 <2841600000>; opp-peak-kBps = <8368000 51609600>; }; }; firmware { scm: scm { compatible = "qcom,scm-sm8250", "qcom,scm"; qcom,dload-mode = <&tcsr 0x13000>; #reset-cells = <1>; }; }; memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ reg = <0x0 0x80000000 0x0 0x0>; }; pmu { compatible = "arm,armv8-pmuv3"; interrupts = ; }; psci { compatible = "arm,psci-1.0"; method = "smc"; CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; }; qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-50000000 { opp-hz = /bits/ 64 <50000000>; required-opps = <&rpmhpd_opp_min_svs>; }; opp-75000000 { opp-hz = /bits/ 64 <75000000>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-120000000 { opp-hz = /bits/ 64 <120000000>; required-opps = <&rpmhpd_opp_svs>; }; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; hyp_mem: memory@80000000 { reg = <0x0 0x80000000 0x0 0x600000>; no-map; }; xbl_aop_mem: memory@80700000 { reg = <0x0 0x80700000 0x0 0x160000>; no-map; }; cmd_db: memory@80860000 { compatible = "qcom,cmd-db"; reg = <0x0 0x80860000 0x0 0x20000>; no-map; }; smem_mem: memory@80900000 { reg = <0x0 0x80900000 0x0 0x200000>; no-map; }; removed_mem: memory@80b00000 { reg = <0x0 0x80b00000 0x0 0x5300000>; no-map; }; camera_mem: memory@86200000 { reg = <0x0 0x86200000 0x0 0x500000>; no-map; }; wlan_mem: memory@86700000 { reg = <0x0 0x86700000 0x0 0x100000>; no-map; }; ipa_fw_mem: memory@86800000 { reg = <0x0 0x86800000 0x0 0x10000>; no-map; }; ipa_gsi_mem: memory@86810000 { reg = <0x0 0x86810000 0x0 0xa000>; no-map; }; gpu_mem: memory@8681a000 { reg = <0x0 0x8681a000 0x0 0x2000>; no-map; }; npu_mem: memory@86900000 { reg = <0x0 0x86900000 0x0 0x500000>; no-map; }; video_mem: memory@86e00000 { reg = <0x0 0x86e00000 0x0 0x500000>; no-map; }; cvp_mem: memory@87300000 { reg = <0x0 0x87300000 0x0 0x500000>; no-map; }; cdsp_mem: memory@87800000 { reg = <0x0 0x87800000 0x0 0x1400000>; no-map; }; slpi_mem: memory@88c00000 { reg = <0x0 0x88c00000 0x0 0x1500000>; no-map; }; adsp_mem: memory@8a100000 { reg = <0x0 0x8a100000 0x0 0x1d00000>; no-map; }; spss_mem: memory@8be00000 { reg = <0x0 0x8be00000 0x0 0x100000>; no-map; }; cdsp_secure_heap: memory@8bf00000 { reg = <0x0 0x8bf00000 0x0 0x4600000>; no-map; }; }; smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; }; smp2p-adsp { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>; qcom,local-pid = <0>; qcom,remote-pid = <2>; smp2p_adsp_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; smp2p_adsp_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; interrupts-extended = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>; qcom,local-pid = <0>; qcom,remote-pid = <5>; smp2p_cdsp_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; smp2p_cdsp_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; smp2p-slpi { compatible = "qcom,smp2p"; qcom,smem = <481>, <430>; interrupts-extended = <&ipcc IPCC_CLIENT_SLPI IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_SLPI IPCC_MPROC_SIGNAL_SMP2P>; qcom,local-pid = <0>; qcom,remote-pid = <3>; smp2p_slpi_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; smp2p_slpi_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; gcc: clock-controller@100000 { compatible = "qcom,gcc-sm8250"; reg = <0x0 0x00100000 0x0 0x1f0000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; }; ipcc: mailbox@408000 { compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; reg = <0 0x00408000 0 0x1000>; interrupts = ; interrupt-controller; #interrupt-cells = <3>; #mbox-cells = <2>; }; qfprom: efuse@784000 { compatible = "qcom,sm8250-qfprom", "qcom,qfprom"; reg = <0 0x00784000 0 0x8ff>; #address-cells = <1>; #size-cells = <1>; gpu_speed_bin: gpu-speed-bin@19b { reg = <0x19b 0x1>; bits = <5 3>; }; }; rng: rng@793000 { compatible = "qcom,prng-ee"; reg = <0 0x00793000 0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00800000 0 0x70000>; interrupts = , , , , , , , , , ; dma-channels = <10>; dma-channel-mask = <0x3f>; iommus = <&apps_smmu 0x76 0x0>; #dma-cells = <3>; status = "disabled"; }; qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; iommus = <&apps_smmu 0x63 0x0>; ranges; status = "disabled"; i2c14: i2c@880000 { compatible = "qcom,geni-i2c"; reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_default>; interrupts = ; dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi14: spi@880000 { compatible = "qcom,geni-spi"; reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; interrupts = ; dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, <&gpi_dma2 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c15: i2c@884000 { compatible = "qcom,geni-i2c"; reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c15_default>; interrupts = ; dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi15: spi@884000 { compatible = "qcom,geni-spi"; reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; interrupts = ; dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, <&gpi_dma2 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c16: i2c@888000 { compatible = "qcom,geni-i2c"; reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c16_default>; interrupts = ; dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi16: spi@888000 { compatible = "qcom,geni-spi"; reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; interrupts = ; dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, <&gpi_dma2 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c17: i2c@88c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c17_default>; interrupts = ; dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi17: spi@88c000 { compatible = "qcom,geni-spi"; reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; interrupts = ; dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, <&gpi_dma2 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; uart17: serial@88c000 { compatible = "qcom,geni-uart"; reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart17_default>; interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; i2c18: i2c@890000 { compatible = "qcom,geni-i2c"; reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c18_default>; interrupts = ; dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi18: spi@890000 { compatible = "qcom,geni-spi"; reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; interrupts = ; dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, <&gpi_dma2 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; uart18: serial@890000 { compatible = "qcom,geni-uart"; reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart18_default>; interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; i2c19: i2c@894000 { compatible = "qcom,geni-i2c"; reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c19_default>; interrupts = ; dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, <&gpi_dma2 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi19: spi@894000 { compatible = "qcom,geni-spi"; reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; interrupts = ; dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, <&gpi_dma2 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>, <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; gpi_dma0: dma-controller@900000 { compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00900000 0 0x70000>; interrupts = , , , , , , , , , , , , ; dma-channels = <15>; dma-channel-mask = <0x7ff>; iommus = <&apps_smmu 0x5b6 0x0>; #dma-cells = <3>; status = "disabled"; }; qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; iommus = <&apps_smmu 0x5a3 0x0>; ranges; status = "disabled"; i2c0: i2c@980000 { compatible = "qcom,geni-i2c"; reg = <0 0x00980000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = ; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi0: spi@980000 { compatible = "qcom,geni-spi"; reg = <0 0x00980000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; interrupts = ; dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c1: i2c@984000 { compatible = "qcom,geni-i2c"; reg = <0 0x00984000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c1_default>; interrupts = ; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi1: spi@984000 { compatible = "qcom,geni-spi"; reg = <0 0x00984000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; interrupts = ; dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c2: i2c@988000 { compatible = "qcom,geni-i2c"; reg = <0 0x00988000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = ; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi2: spi@988000 { compatible = "qcom,geni-spi"; reg = <0 0x00988000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; interrupts = ; dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; uart2: serial@988000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x00988000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; i2c3: i2c@98c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0098c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c3_default>; interrupts = ; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi3: spi@98c000 { compatible = "qcom,geni-spi"; reg = <0 0x0098c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; interrupts = ; dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c4: i2c@990000 { compatible = "qcom,geni-i2c"; reg = <0 0x00990000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c4_default>; interrupts = ; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi4: spi@990000 { compatible = "qcom,geni-spi"; reg = <0 0x00990000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; interrupts = ; dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c5: i2c@994000 { compatible = "qcom,geni-i2c"; reg = <0 0x00994000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c5_default>; interrupts = ; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi5: spi@994000 { compatible = "qcom,geni-spi"; reg = <0 0x00994000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; interrupts = ; dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c6: i2c@998000 { compatible = "qcom,geni-i2c"; reg = <0 0x00998000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = ; dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi6: spi@998000 { compatible = "qcom,geni-spi"; reg = <0 0x00998000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; interrupts = ; dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, <&gpi_dma0 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; uart6: serial@998000 { compatible = "qcom,geni-uart"; reg = <0 0x00998000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; i2c7: i2c@99c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0099c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = ; dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi7: spi@99c000 { compatible = "qcom,geni-spi"; reg = <0 0x0099c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; interrupts = ; dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, <&gpi_dma0 1 7 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; gpi_dma1: dma-controller@a00000 { compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00a00000 0 0x70000>; interrupts = , , , , , , , , , ; dma-channels = <10>; dma-channel-mask = <0x3f>; iommus = <&apps_smmu 0x56 0x0>; #dma-cells = <3>; status = "disabled"; }; qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; iommus = <&apps_smmu 0x43 0x0>; ranges; status = "disabled"; i2c8: i2c@a80000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = ; dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi8: spi@a80000 { compatible = "qcom,geni-spi"; reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; interrupts = ; dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, <&gpi_dma1 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c9: i2c@a84000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c9_default>; interrupts = ; dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi9: spi@a84000 { compatible = "qcom,geni-spi"; reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; interrupts = ; dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, <&gpi_dma1 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = ; dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi10: spi@a88000 { compatible = "qcom,geni-spi"; reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; interrupts = ; dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, <&gpi_dma1 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c11: i2c@a8c000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c11_default>; interrupts = ; dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi11: spi@a8c000 { compatible = "qcom,geni-spi"; reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; interrupts = ; dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, <&gpi_dma1 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c12: i2c@a90000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c12_default>; interrupts = ; dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi12: spi@a90000 { compatible = "qcom,geni-spi"; reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; interrupts = ; dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, <&gpi_dma1 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; uart12: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart12_default>; interrupts = ; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_default>; interrupts = ; dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; power-domains = <&rpmhpd SM8250_CX>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi13: spi@a94000 { compatible = "qcom,geni-spi"; reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; interrupts = ; dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, <&gpi_dma1 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; config_noc: interconnect@1500000 { compatible = "qcom,sm8250-config-noc"; reg = <0 0x01500000 0 0xa580>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8250-system-noc"; reg = <0 0x01620000 0 0x1c200>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163d000 { compatible = "qcom,sm8250-mc-virt"; reg = <0 0x0163d000 0 0x1000>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8250-aggre1-noc"; reg = <0 0x016e0000 0 0x1f180>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8250-aggre2-noc"; reg = <0 0x01700000 0 0x33000>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1733000 { compatible = "qcom,sm8250-compute-noc"; reg = <0 0x01733000 0 0xa180>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8250-mmss-noc"; reg = <0 0x01740000 0 0x1f080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, <0 0x60001000 0 0x1000>, <0 0x60100000 0 0x100000>, <0 0x01c03000 0 0x1000>; reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; num-lanes = <1>; #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = , , , , , , , ; interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "tbu", "ddrss_sf_tbu"; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; resets = <&gcc GCC_PCIE_0_BCR>; reset-names = "pci"; power-domains = <&gcc PCIE_0_GDSC>; phys = <&pcie0_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; dma-coherent; status = "disabled"; pcieport0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; #address-cells = <3>; #size-cells = <2>; ranges; }; }; pcie0_phy: phy@1c06000 { compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; reg = <0 0x01c06000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_WIFI_CLKREF_EN>, <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", "refgen", "pipe"; clock-output-names = "pcie_0_pipe_clk"; #clock-cells = <0>; #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; assigned-clock-rates = <100000000>; status = "disabled"; }; pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, <0 0x40001000 0 0x1000>, <0 0x40100000 0 0x100000>, <0 0x01c0b000 0 0x1000>; reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; num-lanes = <2>; #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = , , , , , , , ; interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ref", "tbu", "ddrss_sf_tbu"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; resets = <&gcc GCC_PCIE_1_BCR>; reset-names = "pci"; power-domains = <&gcc PCIE_1_GDSC>; phys = <&pcie1_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; dma-coherent; status = "disabled"; pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; #address-cells = <3>; #size-cells = <2>; ranges; }; }; pcie1_phy: phy@1c0e000 { compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; reg = <0 0x01c0e000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", "refgen", "pipe"; clock-output-names = "pcie_1_pipe_clk"; #clock-cells = <0>; #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; assigned-clock-rates = <100000000>; status = "disabled"; }; pcie2: pcie@1c10000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c10000 0 0x3000>, <0 0x64000000 0 0xf1d>, <0 0x64000f20 0 0xa8>, <0 0x64001000 0 0x1000>, <0 0x64100000 0 0x100000>, <0 0x01c13000 0 0x1000>; reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <2>; bus-range = <0x00 0xff>; num-lanes = <2>; #address-cells = <3>; #size-cells = <2>; ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; interrupts = , , , , , , , ; interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, <&gcc GCC_PCIE_2_AUX_CLK>, <&gcc GCC_PCIE_2_CFG_AHB_CLK>, <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, <&gcc GCC_PCIE_MDM_CLKREF_EN>, <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ref", "tbu", "ddrss_sf_tbu"; assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, <0x100 &apps_smmu 0x1d01 0x1>; resets = <&gcc GCC_PCIE_2_BCR>; reset-names = "pci"; power-domains = <&gcc PCIE_2_GDSC>; phys = <&pcie2_phy>; phy-names = "pciephy"; perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie2_default_state>; dma-coherent; status = "disabled"; pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; #address-cells = <3>; #size-cells = <2>; ranges; }; }; pcie2_phy: phy@1c16000 { compatible = "qcom,sm8250-qmp-modem-pcie-phy"; reg = <0 0x01c16000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_2_CFG_AHB_CLK>, <&gcc GCC_PCIE_MDM_CLKREF_EN>, <&gcc GCC_PCIE2_PHY_REFGEN_CLK>, <&gcc GCC_PCIE_2_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", "refgen", "pipe"; clock-output-names = "pcie_2_pipe_clk"; #clock-cells = <0>; #phy-cells = <0>; resets = <&gcc GCC_PCIE_2_PHY_BCR>; reset-names = "phy"; assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; assigned-clock-rates = <100000000>; status = "disabled"; }; ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = ; phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; resets = <&gcc GCC_UFS_PHY_BCR>; reset-names = "rst"; power-domains = <&gcc UFS_PHY_GDSC>; iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>; clock-names = "core_clk", "bus_aggr_clk", "iface_clk", "core_clk_unipro", "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", "rx_lane1_sync_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_UFS_PHY_AHB_CLK>, <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>; interconnect-names = "ufs-ddr", "cpu-ufs"; status = "disabled"; ufs_opp_table: opp-table { compatible = "operating-points-v2"; opp-37500000 { opp-hz = /bits/ 64 <37500000>, /bits/ 64 <0>, /bits/ 64 <0>, /bits/ 64 <37500000>, /bits/ 64 <0>, /bits/ 64 <0>, /bits/ 64 <0>, /bits/ 64 <0>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-300000000 { opp-hz = /bits/ 64 <300000000>, /bits/ 64 <0>, /bits/ 64 <0>, /bits/ 64 <300000000>, /bits/ 64 <0>, /bits/ 64 <0>, /bits/ 64 <0>, /bits/ 64 <0>; required-opps = <&rpmhpd_opp_nom>; }; }; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8250-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, <&gcc GCC_UFS_1X_CLKREF_EN>; clock-names = "ref", "ref_aux", "qref"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; power-domains = <&gcc UFS_PHY_GDSC>; #phy-cells = <0>; status = "disabled"; }; cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = ; #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; num-channels = <8>; qcom,num-ees = <2>; iommus = <&apps_smmu 0x592 0x0000>, <&apps_smmu 0x598 0x0000>, <&apps_smmu 0x599 0x0000>, <&apps_smmu 0x59f 0x0000>, <&apps_smmu 0x586 0x0011>, <&apps_smmu 0x596 0x0011>; }; crypto: crypto@1dfa000 { compatible = "qcom,sm8250-qce", "qcom,sm8150-qce", "qcom,qce"; reg = <0 0x01dfa000 0 0x6000>; dmas = <&cryptobam 4>, <&cryptobam 5>; dma-names = "rx", "tx"; iommus = <&apps_smmu 0x592 0x0000>, <&apps_smmu 0x598 0x0000>, <&apps_smmu 0x599 0x0000>, <&apps_smmu 0x59f 0x0000>, <&apps_smmu 0x586 0x0011>, <&apps_smmu 0x596 0x0011>; interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "memory"; }; tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; #hwlock-cells = <1>; }; tcsr: syscon@1fc0000 { compatible = "qcom,sm8250-tcsr", "syscon"; reg = <0x0 0x1fc0000 0x0 0x30000>; }; wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; clocks = <&audiocc LPASS_CDC_WSA_MCLK>, <&audiocc LPASS_CDC_WSA_NPL>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; #clock-cells = <0>; clock-output-names = "mclk"; #sound-dai-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&wsa_swr_active>; status = "disabled"; }; swr0: soundwire@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = ; clocks = <&wsamacro>; clock-names = "iface"; qcom,din-ports = <2>; qcom,dout-ports = <6>; qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>; #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; status = "disabled"; }; audiocc: clock-controller@3300000 { compatible = "qcom,sm8250-lpass-audiocc"; reg = <0 0x03300000 0 0x30000>; #clock-cells = <1>; clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio", "bus"; }; vamacro: codec@3370000 { compatible = "qcom,sm8250-lpass-va-macro"; reg = <0 0x03370000 0 0x1000>; clocks = <&aoncc LPASS_CDC_VA_MCLK>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "mclk", "macro", "dcodec"; #clock-cells = <0>; clock-output-names = "fsgen"; #sound-dai-cells = <1>; }; rxmacro: rxmacro@3200000 { pinctrl-names = "default"; pinctrl-0 = <&rx_swr_active>; compatible = "qcom,sm8250-lpass-rx-macro"; reg = <0 0x03200000 0 0x1000>; status = "disabled"; clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; #clock-cells = <0>; clock-output-names = "mclk"; #sound-dai-cells = <1>; }; swr1: soundwire@3210000 { reg = <0 0x03210000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; status = "disabled"; interrupts = ; clocks = <&rxmacro>; clock-names = "iface"; label = "RX"; qcom,din-ports = <0>; qcom,dout-ports = <5>; qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; }; txmacro: txmacro@3220000 { pinctrl-names = "default"; pinctrl-0 = <&tx_swr_active>; compatible = "qcom,sm8250-lpass-tx-macro"; reg = <0 0x03220000 0 0x1000>; status = "disabled"; clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; #clock-cells = <0>; clock-output-names = "mclk"; #sound-dai-cells = <1>; }; /* tx macro */ swr2: soundwire@3230000 { reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = ; interrupt-names = "core"; status = "disabled"; clocks = <&txmacro>; clock-names = "iface"; label = "TX"; qcom,din-ports = <5>; qcom,dout-ports = <0>; qcom,ports-sinterval-low = /bits/ 8 <0xff 0x01 0x01 0x03 0x03>; qcom,ports-offset1 = /bits/ 8 <0xff 0x01 0x00 0x02 0x00>; qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x00 0x00 0x00>; qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0xff 0x00 0x01 0x00 0x01>; #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; }; aoncc: clock-controller@3380000 { compatible = "qcom,sm8250-lpass-aoncc"; reg = <0 0x03380000 0 0x40000>; #clock-cells = <1>; clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio", "bus"; }; lpass_tlmm: pinctrl@33c0000 { compatible = "qcom,sm8250-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0x0 0x20000>, <0 0x03550000 0x0 0x10000>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 14>; clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio"; wsa_swr_active: wsa-swr-active-state { clk-pins { pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; slew-rate = <1>; bias-disable; }; data-pins { pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; slew-rate = <1>; bias-bus-hold; }; }; wsa_swr_sleep: wsa-swr-sleep-state { clk-pins { pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; bias-pull-down; }; data-pins { pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; bias-pull-down; }; }; dmic01_active: dmic01-active-state { clk-pins { pins = "gpio6"; function = "dmic1_clk"; drive-strength = <8>; output-high; }; data-pins { pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; }; }; dmic01_sleep: dmic01-sleep-state { clk-pins { pins = "gpio6"; function = "dmic1_clk"; drive-strength = <2>; bias-disable; output-low; }; data-pins { pins = "gpio7"; function = "dmic1_data"; drive-strength = <2>; bias-pull-down; }; }; rx_swr_active: rx-swr-active-state { clk-pins { pins = "gpio3"; function = "swr_rx_clk"; drive-strength = <2>; slew-rate = <1>; bias-disable; }; data-pins { pins = "gpio4", "gpio5"; function = "swr_rx_data"; drive-strength = <2>; slew-rate = <1>; bias-bus-hold; }; }; tx_swr_active: tx-swr-active-state { clk-pins { pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; slew-rate = <1>; bias-disable; }; data-pins { pins = "gpio1", "gpio2"; function = "swr_tx_data"; drive-strength = <2>; slew-rate = <1>; bias-bus-hold; }; }; tx_swr_sleep: tx-swr-sleep-state { clk-pins { pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; bias-pull-down; }; data1-pins { pins = "gpio1"; function = "swr_tx_data"; drive-strength = <2>; bias-bus-hold; }; data2-pins { pins = "gpio2"; function = "swr_tx_data"; drive-strength = <2>; bias-pull-down; }; }; }; gpu: gpu@3d00000 { compatible = "qcom,adreno-650.2", "qcom,adreno"; reg = <0 0x03d00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = ; iommus = <&adreno_smmu 0 0x401>; operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; #cooling-cells = <2>; status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-670000000 { opp-hz = /bits/ 64 <670000000>; opp-level = ; opp-supported-hw = <0xa>; }; opp-587000000 { opp-hz = /bits/ 64 <587000000>; opp-level = ; opp-supported-hw = <0xb>; }; opp-525000000 { opp-hz = /bits/ 64 <525000000>; opp-level = ; opp-supported-hw = <0xf>; }; opp-490000000 { opp-hz = /bits/ 64 <490000000>; opp-level = ; opp-supported-hw = <0xf>; }; opp-441600000 { opp-hz = /bits/ 64 <441600000>; opp-level = ; opp-supported-hw = <0xf>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-level = ; opp-supported-hw = <0xf>; }; opp-305000000 { opp-hz = /bits/ 64 <305000000>; opp-level = ; opp-supported-hw = <0xf>; }; }; }; gmu: gmu@3d6a000 { compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; reg = <0 0x03d6a000 0 0x30000>, <0 0x3de0000 0 0x10000>, <0 0xb290000 0 0x10000>, <0 0xb490000 0 0x10000>; reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq"; interrupts = , ; interrupt-names = "hfi", "gmu"; clocks = <&gpucc GPU_CC_AHB_CLK>, <&gpucc GPU_CC_CX_GMU_CLK>, <&gpucc GPU_CC_CXO_CLK>, <&gcc GCC_DDRSS_GPU_AXI_CLK>, <&gcc GCC_GPU_MEMNOC_GFX_CLK>; clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; power-domains = <&gpucc GPU_CX_GDSC>, <&gpucc GPU_GX_GDSC>; power-domain-names = "cx", "gx"; iommus = <&adreno_smmu 5 0x400>; operating-points-v2 = <&gmu_opp_table>; status = "disabled"; gmu_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-level = ; }; }; }; gpucc: clock-controller@3d90000 { compatible = "qcom,sm8250-gpucc"; reg = <0 0x03d90000 0 0x9000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; clock-names = "bi_tcxo", "gcc_gpu_gpll0_clk_src", "gcc_gpu_gpll0_div_clk_src"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; adreno_smmu: iommu@3da0000 { compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; interrupts = , , , , , , , , , ; clocks = <&gpucc GPU_CC_AHB_CLK>, <&gcc GCC_GPU_MEMNOC_GFX_CLK>, <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; clock-names = "ahb", "bus", "iface"; power-domains = <&gpucc GPU_CX_GDSC>; dma-coherent; }; slpi: remoteproc@5c00000 { compatible = "qcom,sm8250-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; power-domains = <&rpmhpd RPMHPD_LCX>, <&rpmhpd RPMHPD_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; qcom,qmp = <&aoss_qmp>; qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; status = "disabled"; glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_SLPI IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_SLPI IPCC_MPROC_SIGNAL_GLINK_QMP>; label = "slpi"; qcom,remote-pid = <3>; fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "sdsp"; qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; compute-cb@1 { compatible = "qcom,fastrpc-compute-cb"; reg = <1>; iommus = <&apps_smmu 0x0541 0x0>; }; compute-cb@2 { compatible = "qcom,fastrpc-compute-cb"; reg = <2>; iommus = <&apps_smmu 0x0542 0x0>; }; compute-cb@3 { compatible = "qcom,fastrpc-compute-cb"; reg = <3>; iommus = <&apps_smmu 0x0543 0x0>; /* note: shared-cb = <4> in downstream */ }; }; }; }; stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, <0 0x16280000 0 0x180000>; reg-names = "stm-base", "stm-stimulus-base"; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { stm_out: endpoint { remote-endpoint = <&funnel0_in7>; }; }; }; }; tpda@6004000 { compatible = "qcom,coresight-tpda", "arm,primecell"; reg = <0 0x06004000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { tpda_out_funnel_qatb: endpoint { remote-endpoint = <&funnel_qatb_in_tpda>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@9 { reg = <9>; tpda_9_in_tpdm_mm: endpoint { remote-endpoint = <&tpdm_mm_out_tpda9>; }; }; port@17 { reg = <23>; tpda_23_in_tpdm_prng: endpoint { remote-endpoint = <&tpdm_prng_out_tpda_23>; }; }; }; }; funnel@6005000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06005000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_qatb_out_funnel_in0: endpoint { remote-endpoint = <&funnel_in0_in_funnel_qatb>; }; }; }; in-ports { port { funnel_qatb_in_tpda: endpoint { remote-endpoint = <&tpda_out_funnel_qatb>; }; }; }; }; funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06041000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_in0_out_funnel_merg: endpoint { remote-endpoint = <&funnel_merg_in_funnel_in0>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@6 { reg = <6>; funnel_in0_in_funnel_qatb: endpoint { remote-endpoint = <&funnel_qatb_out_funnel_in0>; }; }; port@7 { reg = <7>; funnel0_in7: endpoint { remote-endpoint = <&stm_out>; }; }; }; }; funnel@6042000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06042000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_in1_out_funnel_merg: endpoint { remote-endpoint = <&funnel_merg_in_funnel_in1>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@4 { reg = <4>; funnel_in1_in_funnel_apss_merg: endpoint { remote-endpoint = <&funnel_apss_merg_out_funnel_in1>; }; }; }; }; funnel@6045000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06045000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_merg_out_funnel_swao: endpoint { remote-endpoint = <&funnel_swao_in_funnel_merg>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; funnel_merg_in_funnel_in0: endpoint { remote-endpoint = <&funnel_in0_out_funnel_merg>; }; }; port@1 { reg = <1>; funnel_merg_in_funnel_in1: endpoint { remote-endpoint = <&funnel_in1_out_funnel_merg>; }; }; }; }; replicator@6046000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0 0x06046000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { replicator_out: endpoint { remote-endpoint = <&etr_in>; }; }; }; in-ports { port { replicator_cx_in_swao_out: endpoint { remote-endpoint = <&replicator_swao_out_cx_in>; }; }; }; }; etr@6048000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x06048000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,scatter-gather; in-ports { port { etr_in: endpoint { remote-endpoint = <&replicator_out>; }; }; }; }; tpdm@684c000 { compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0 0x0684c000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { tpdm_prng_out_tpda_23: endpoint { remote-endpoint = <&tpda_23_in_tpdm_prng>; }; }; }; }; funnel@6b04000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; arm,primecell-periphid = <0x000bb908>; reg = <0 0x06b04000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_swao_out_etf: endpoint { remote-endpoint = <&etf_in_funnel_swao_out>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@7 { reg = <7>; funnel_swao_in_funnel_merg: endpoint { remote-endpoint = <&funnel_merg_out_funnel_swao>; }; }; }; }; etf@6b05000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x06b05000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; }; in-ports { port { etf_in_funnel_swao_out: endpoint { remote-endpoint = <&funnel_swao_out_etf>; }; }; }; }; replicator@6b06000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0 0x06b06000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { replicator_swao_out_cx_in: endpoint { remote-endpoint = <&replicator_cx_in_swao_out>; }; }; }; in-ports { port { replicator_in: endpoint { remote-endpoint = <&etf_out>; }; }; }; }; tpdm@6c08000 { compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0 0x06c08000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { tpdm_mm_out_funnel_dl_mm: endpoint { remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>; }; }; }; }; funnel@6c0b000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06c0b000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_dl_mm_out_funnel_dl_center: endpoint { remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@3 { reg = <3>; funnel_dl_mm_in_tpdm_mm: endpoint { remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>; }; }; }; }; funnel@6c2d000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06c2d000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { tpdm_mm_out_tpda9: endpoint { remote-endpoint = <&tpda_9_in_tpdm_mm>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@2 { reg = <2>; funnel_dl_center_in_funnel_dl_mm: endpoint { remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>; }; }; }; }; etm@7040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07040000 0 0x1000>; cpu = <&CPU0>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm0_out: endpoint { remote-endpoint = <&apss_funnel_in0>; }; }; }; }; etm@7140000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07140000 0 0x1000>; cpu = <&CPU1>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm1_out: endpoint { remote-endpoint = <&apss_funnel_in1>; }; }; }; }; etm@7240000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07240000 0 0x1000>; cpu = <&CPU2>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm2_out: endpoint { remote-endpoint = <&apss_funnel_in2>; }; }; }; }; etm@7340000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07340000 0 0x1000>; cpu = <&CPU3>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm3_out: endpoint { remote-endpoint = <&apss_funnel_in3>; }; }; }; }; etm@7440000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07440000 0 0x1000>; cpu = <&CPU4>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm4_out: endpoint { remote-endpoint = <&apss_funnel_in4>; }; }; }; }; etm@7540000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07540000 0 0x1000>; cpu = <&CPU5>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm5_out: endpoint { remote-endpoint = <&apss_funnel_in5>; }; }; }; }; etm@7640000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07640000 0 0x1000>; cpu = <&CPU6>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm6_out: endpoint { remote-endpoint = <&apss_funnel_in6>; }; }; }; }; etm@7740000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07740000 0 0x1000>; cpu = <&CPU7>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; out-ports { port { etm7_out: endpoint { remote-endpoint = <&apss_funnel_in7>; }; }; }; }; funnel@7800000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x07800000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_apss_out_funnel_apss_merg: endpoint { remote-endpoint = <&funnel_apss_merg_in_funnel_apss>; }; }; }; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; apss_funnel_in0: endpoint { remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; apss_funnel_in1: endpoint { remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; apss_funnel_in2: endpoint { remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; apss_funnel_in3: endpoint { remote-endpoint = <&etm3_out>; }; }; port@4 { reg = <4>; apss_funnel_in4: endpoint { remote-endpoint = <&etm4_out>; }; }; port@5 { reg = <5>; apss_funnel_in5: endpoint { remote-endpoint = <&etm5_out>; }; }; port@6 { reg = <6>; apss_funnel_in6: endpoint { remote-endpoint = <&etm6_out>; }; }; port@7 { reg = <7>; apss_funnel_in7: endpoint { remote-endpoint = <&etm7_out>; }; }; }; }; funnel@7810000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x07810000 0 0x1000>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; out-ports { port { funnel_apss_merg_out_funnel_in1: endpoint { remote-endpoint = <&funnel_in1_in_funnel_apss_merg>; }; }; }; in-ports { port { funnel_apss_merg_in_funnel_apss: endpoint { remote-endpoint = <&funnel_apss_out_funnel_apss_merg>; }; }; }; }; cdsp: remoteproc@8300000 { compatible = "qcom,sm8250-cdsp-pas"; reg = <0 0x08300000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; power-domains = <&rpmhpd RPMHPD_CX>; memory-region = <&cdsp_mem>; qcom,qmp = <&aoss_qmp>; qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; status = "disabled"; glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_GLINK_QMP>; label = "cdsp"; qcom,remote-pid = <5>; fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "cdsp"; qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; compute-cb@1 { compatible = "qcom,fastrpc-compute-cb"; reg = <1>; iommus = <&apps_smmu 0x1001 0x0460>; }; compute-cb@2 { compatible = "qcom,fastrpc-compute-cb"; reg = <2>; iommus = <&apps_smmu 0x1002 0x0460>; }; compute-cb@3 { compatible = "qcom,fastrpc-compute-cb"; reg = <3>; iommus = <&apps_smmu 0x1003 0x0460>; }; compute-cb@4 { compatible = "qcom,fastrpc-compute-cb"; reg = <4>; iommus = <&apps_smmu 0x1004 0x0460>; }; compute-cb@5 { compatible = "qcom,fastrpc-compute-cb"; reg = <5>; iommus = <&apps_smmu 0x1005 0x0460>; }; compute-cb@6 { compatible = "qcom,fastrpc-compute-cb"; reg = <6>; iommus = <&apps_smmu 0x1006 0x0460>; }; compute-cb@7 { compatible = "qcom,fastrpc-compute-cb"; reg = <7>; iommus = <&apps_smmu 0x1007 0x0460>; }; compute-cb@8 { compatible = "qcom,fastrpc-compute-cb"; reg = <8>; iommus = <&apps_smmu 0x1008 0x0460>; }; /* note: secure cb9 in downstream */ }; }; }; usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8250-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; reg = <0 0x088e3000 0 0x400>; status = "disabled"; #phy-cells = <0>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; usb_2_hsphy: phy@88e4000 { compatible = "qcom,sm8250-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; reg = <0 0x088e4000 0 0x400>; status = "disabled"; #phy-cells = <0>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "ref"; resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8250-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; status = "disabled"; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; #clock-cells = <1>; #phy-cells = <1>; orientation-switch; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usb_1_qmpphy_out: endpoint {}; }; port@1 { reg = <1>; usb_1_qmpphy_usb_ss_in: endpoint { remote-endpoint = <&usb_1_dwc3_ss_out>; }; }; port@2 { reg = <2>; usb_1_qmpphy_dp_in: endpoint {}; }; }; }; usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8250-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>, <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "aux", "ref", "com_aux", "pipe"; clock-output-names = "usb3_uni_phy_pipe_clk_src"; #clock-cells = <0>; #phy-cells = <0>; resets = <&gcc GCC_USB3_PHY_SEC_BCR>, <&gcc GCC_USB3PHY_PHY_SEC_BCR>; reset-names = "phy", "phy_phy"; status = "disabled"; }; sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x4a0 0x0>; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&sdhc2_opp_table>; status = "disabled"; sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { opp-hz = /bits/ 64 <19200000>; required-opps = <&rpmhpd_opp_min_svs>; }; opp-50000000 { opp-hz = /bits/ 64 <50000000>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmhpd_opp_svs>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmhpd_opp_svs_l1>; }; }; }; pmu@9091000 { compatible = "qcom,sm8250-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; reg = <0 0x09091000 0 0x1000>; interrupts = ; interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI_CH0 3>; operating-points-v2 = <&llcc_bwmon_opp_table>; llcc_bwmon_opp_table: opp-table { compatible = "operating-points-v2"; opp-800000 { opp-peak-kBps = <(200 * 4 * 1000)>; }; opp-1200000 { opp-peak-kBps = <(300 * 4 * 1000)>; }; opp-1804000 { opp-peak-kBps = <(451 * 4 * 1000)>; }; opp-2188000 { opp-peak-kBps = <(547 * 4 * 1000)>; }; opp-2724000 { opp-peak-kBps = <(681 * 4 * 1000)>; }; opp-3072000 { opp-peak-kBps = <(768 * 4 * 1000)>; }; opp-4068000 { opp-peak-kBps = <(1017 * 4 * 1000)>; }; /* 1353 MHz, LPDDR4X */ opp-6220000 { opp-peak-kBps = <(1555 * 4 * 1000)>; }; opp-7216000 { opp-peak-kBps = <(1804 * 4 * 1000)>; }; opp-8368000 { opp-peak-kBps = <(2092 * 4 * 1000)>; }; /* LPDDR5 */ opp-10944000 { opp-peak-kBps = <(2736 * 4 * 1000)>; }; }; }; pmu@90b6400 { compatible = "qcom,sm8250-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x090b6400 0 0x600>; interrupts = ; interconnects = <&gem_noc MASTER_AMPSS_M0 3 &gem_noc SLAVE_LLCC 3>; operating-points-v2 = <&cpu_bwmon_opp_table>; cpu_bwmon_opp_table: opp-table { compatible = "operating-points-v2"; opp-800000 { opp-peak-kBps = <(200 * 4 * 1000)>; }; opp-1804000 { opp-peak-kBps = <(451 * 4 * 1000)>; }; opp-2188000 { opp-peak-kBps = <(547 * 4 * 1000)>; }; opp-2724000 { opp-peak-kBps = <(681 * 4 * 1000)>; }; opp-3072000 { opp-peak-kBps = <(768 * 4 * 1000)>; }; /* 1017MHz, 1353 MHz, LPDDR4X */ opp-6220000 { opp-peak-kBps = <(1555 * 4 * 1000)>; }; opp-6832000 { opp-peak-kBps = <(1708 * 4 * 1000)>; }; opp-8368000 { opp-peak-kBps = <(2092 * 4 * 1000)>; }; /* 2133MHz, LPDDR4X */ /* LPDDR5 */ opp-10944000 { opp-peak-kBps = <(2736 * 4 * 1000)>; }; /* LPDDR5 */ opp-12784000 { opp-peak-kBps = <(3196 * 4 * 1000)>; }; }; }; dc_noc: interconnect@90c0000 { compatible = "qcom,sm8250-dc-noc"; reg = <0 0x090c0000 0 0x4200>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9100000 { compatible = "qcom,sm8250-gem-noc"; reg = <0 0x09100000 0 0xb4000>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sm8250-npu-noc"; reg = <0 0x09990000 0 0x1600>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; usb_1: usb@a6f8800 { compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; ranges; dma-ranges; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; wakeup-source; resets = <&gcc GCC_USB30_PRIM_BCR>; interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = ; iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usb_1_dwc3_hs_out: endpoint { }; }; port@1 { reg = <1>; usb_1_dwc3_ss_out: endpoint { remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; }; }; }; }; system-cache-controller@9200000 { compatible = "qcom,sm8250-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, <0 0x09600000 0 0x50000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", "llcc3_base", "llcc_broadcast_base"; }; usb_2: usb@a8f8800 { compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; reg = <0 0x0a8f8800 0 0x400>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; ranges; dma-ranges; clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; wakeup-source; resets = <&gcc GCC_USB30_SEC_BCR>; interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = ; iommus = <&apps_smmu 0x20 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; venus: video-codec@aa00000 { compatible = "qcom,sm8250-venus"; reg = <0 0x0aa00000 0 0x100000>; interrupts = ; power-domains = <&videocc MVS0C_GDSC>, <&videocc MVS0_GDSC>, <&rpmhpd RPMHPD_MX>; power-domain-names = "venus", "vcodec0", "mx"; operating-points-v2 = <&venus_opp_table>; clocks = <&gcc GCC_VIDEO_AXI0_CLK>, <&videocc VIDEO_CC_MVS0C_CLK>, <&videocc VIDEO_CC_MVS0_CLK>; clock-names = "iface", "core", "vcodec0_core"; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>, <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cpu-cfg", "video-mem"; iommus = <&apps_smmu 0x2100 0x0400>; memory-region = <&video_mem>; resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, <&videocc VIDEO_CC_MVS0C_CLK_ARES>; reset-names = "bus", "core"; status = "disabled"; video-decoder { compatible = "venus-decoder"; }; video-encoder { compatible = "venus-encoder"; }; venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-720000000 { opp-hz = /bits/ 64 <720000000>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-1014000000 { opp-hz = /bits/ 64 <1014000000>; required-opps = <&rpmhpd_opp_svs>; }; opp-1098000000 { opp-hz = /bits/ 64 <1098000000>; required-opps = <&rpmhpd_opp_svs_l1>; }; opp-1332000000 { opp-hz = /bits/ 64 <1332000000>; required-opps = <&rpmhpd_opp_nom>; }; }; }; videocc: clock-controller@abf0000 { compatible = "qcom,sm8250-videocc"; reg = <0 0x0abf0000 0 0x10000>; clocks = <&gcc GCC_VIDEO_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>; power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; cci0: cci@ac4f000 { compatible = "qcom,sm8250-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; reg = <0 0x0ac4f000 0 0x1000>; interrupts = ; power-domains = <&camcc TITAN_TOP_GDSC>; clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, <&camcc CAM_CC_CPAS_AHB_CLK>, <&camcc CAM_CC_CCI_0_CLK>, <&camcc CAM_CC_CCI_0_CLK_SRC>; clock-names = "camnoc_axi", "slow_ahb_src", "cpas_ahb", "cci", "cci_src"; pinctrl-0 = <&cci0_default>; pinctrl-1 = <&cci0_sleep>; pinctrl-names = "default", "sleep"; status = "disabled"; cci0_i2c0: i2c-bus@0 { reg = <0>; clock-frequency = <1000000>; #address-cells = <1>; #size-cells = <0>; }; cci0_i2c1: i2c-bus@1 { reg = <1>; clock-frequency = <1000000>; #address-cells = <1>; #size-cells = <0>; }; }; cci1: cci@ac50000 { compatible = "qcom,sm8250-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; reg = <0 0x0ac50000 0 0x1000>; interrupts = ; power-domains = <&camcc TITAN_TOP_GDSC>; clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, <&camcc CAM_CC_CPAS_AHB_CLK>, <&camcc CAM_CC_CCI_1_CLK>, <&camcc CAM_CC_CCI_1_CLK_SRC>; clock-names = "camnoc_axi", "slow_ahb_src", "cpas_ahb", "cci", "cci_src"; pinctrl-0 = <&cci1_default>; pinctrl-1 = <&cci1_sleep>; pinctrl-names = "default", "sleep"; status = "disabled"; cci1_i2c0: i2c-bus@0 { reg = <0>; clock-frequency = <1000000>; #address-cells = <1>; #size-cells = <0>; }; cci1_i2c1: i2c-bus@1 { reg = <1>; clock-frequency = <1000000>; #address-cells = <1>; #size-cells = <0>; }; }; camss: camss@ac6a000 { compatible = "qcom,sm8250-camss"; status = "disabled"; reg = <0 0x0ac6a000 0 0x2000>, <0 0x0ac6c000 0 0x2000>, <0 0x0ac6e000 0 0x1000>, <0 0x0ac70000 0 0x1000>, <0 0x0ac72000 0 0x1000>, <0 0x0ac74000 0 0x1000>, <0 0x0acb4000 0 0xd000>, <0 0x0acc3000 0 0xd000>, <0 0x0acd9000 0 0x2200>, <0 0x0acdb200 0 0x2200>; reg-names = "csiphy0", "csiphy1", "csiphy2", "csiphy3", "csiphy4", "csiphy5", "vfe0", "vfe1", "vfe_lite0", "vfe_lite1"; interrupts = , , , , , , , , , , , , , ; interrupt-names = "csiphy0", "csiphy1", "csiphy2", "csiphy3", "csiphy4", "csiphy5", "csid0", "csid1", "csid2", "csid3", "vfe0", "vfe1", "vfe_lite0", "vfe_lite1"; power-domains = <&camcc IFE_0_GDSC>, <&camcc IFE_1_GDSC>, <&camcc TITAN_TOP_GDSC>; clocks = <&gcc GCC_CAMERA_AHB_CLK>, <&gcc GCC_CAMERA_HF_AXI_CLK>, <&gcc GCC_CAMERA_SF_AXI_CLK>, <&camcc CAM_CC_CAMNOC_AXI_CLK>, <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, <&camcc CAM_CC_CORE_AHB_CLK>, <&camcc CAM_CC_CPAS_AHB_CLK>, <&camcc CAM_CC_CSIPHY0_CLK>, <&camcc CAM_CC_CSI0PHYTIMER_CLK>, <&camcc CAM_CC_CSIPHY1_CLK>, <&camcc CAM_CC_CSI1PHYTIMER_CLK>, <&camcc CAM_CC_CSIPHY2_CLK>, <&camcc CAM_CC_CSI2PHYTIMER_CLK>, <&camcc CAM_CC_CSIPHY3_CLK>, <&camcc CAM_CC_CSI3PHYTIMER_CLK>, <&camcc CAM_CC_CSIPHY4_CLK>, <&camcc CAM_CC_CSI4PHYTIMER_CLK>, <&camcc CAM_CC_CSIPHY5_CLK>, <&camcc CAM_CC_CSI5PHYTIMER_CLK>, <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, <&camcc CAM_CC_IFE_0_AHB_CLK>, <&camcc CAM_CC_IFE_0_AXI_CLK>, <&camcc CAM_CC_IFE_0_CLK>, <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, <&camcc CAM_CC_IFE_0_CSID_CLK>, <&camcc CAM_CC_IFE_0_AREG_CLK>, <&camcc CAM_CC_IFE_1_AHB_CLK>, <&camcc CAM_CC_IFE_1_AXI_CLK>, <&camcc CAM_CC_IFE_1_CLK>, <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, <&camcc CAM_CC_IFE_1_CSID_CLK>, <&camcc CAM_CC_IFE_1_AREG_CLK>, <&camcc CAM_CC_IFE_LITE_AHB_CLK>, <&camcc CAM_CC_IFE_LITE_AXI_CLK>, <&camcc CAM_CC_IFE_LITE_CLK>, <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, <&camcc CAM_CC_IFE_LITE_CSID_CLK>; clock-names = "cam_ahb_clk", "cam_hf_axi", "cam_sf_axi", "camnoc_axi", "camnoc_axi_src", "core_ahb", "cpas_ahb", "csiphy0", "csiphy0_timer", "csiphy1", "csiphy1_timer", "csiphy2", "csiphy2_timer", "csiphy3", "csiphy3_timer", "csiphy4", "csiphy4_timer", "csiphy5", "csiphy5_timer", "slow_ahb_src", "vfe0_ahb", "vfe0_axi", "vfe0", "vfe0_cphy_rx", "vfe0_csid", "vfe0_areg", "vfe1_ahb", "vfe1_axi", "vfe1", "vfe1_cphy_rx", "vfe1_csid", "vfe1_areg", "vfe_lite_ahb", "vfe_lite_axi", "vfe_lite", "vfe_lite_cphy_rx", "vfe_lite_csid"; iommus = <&apps_smmu 0x800 0x400>, <&apps_smmu 0x801 0x400>, <&apps_smmu 0x840 0x400>, <&apps_smmu 0x841 0x400>, <&apps_smmu 0xc00 0x400>, <&apps_smmu 0xc01 0x400>, <&apps_smmu 0xc40 0x400>, <&apps_smmu 0xc41 0x400>; interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>, <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>, <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>, <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cam_ahb", "cam_hf_0_mnoc", "cam_sf_0_mnoc", "cam_sf_icp_mnoc"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; }; port@1 { reg = <1>; }; port@2 { reg = <2>; }; port@3 { reg = <3>; }; port@4 { reg = <4>; }; port@5 { reg = <5>; }; }; }; camcc: clock-controller@ad00000 { compatible = "qcom,sm8250-camcc"; reg = <0 0x0ad00000 0 0x10000>; clocks = <&gcc GCC_CAMERA_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; status = "disabled"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; mdss: display-subsystem@ae00000 { compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>, <&gcc GCC_DISP_SF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "bus", "nrt_bus", "core"; interrupts = ; interrupt-controller; #interrupt-cells = <1>; iommus = <&apps_smmu 0x820 0x402>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; ranges; mdss_mdp: display-controller@ae01000 { compatible = "qcom,sm8250-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; reg-names = "mdp", "vbif"; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "iface", "bus", "core", "vsync"; assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; interrupt-parent = <&mdss>; interrupts = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dpu_intf1_out: endpoint { remote-endpoint = <&mdss_dsi0_in>; }; }; port@1 { reg = <1>; dpu_intf2_out: endpoint { remote-endpoint = <&mdss_dsi1_in>; }; }; port@2 { reg = <2>; dpu_intf0_out: endpoint { remote-endpoint = <&mdss_dp_in>; }; }; }; mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { opp-hz = /bits/ 64 <200000000>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-300000000 { opp-hz = /bits/ 64 <300000000>; required-opps = <&rpmhpd_opp_svs>; }; opp-345000000 { opp-hz = /bits/ 64 <345000000>; required-opps = <&rpmhpd_opp_svs_l1>; }; opp-460000000 { opp-hz = /bits/ 64 <460000000>; required-opps = <&rpmhpd_opp_nom>; }; }; }; mdss_dp: displayport-controller@ae90000 { compatible = "qcom,sm8250-dp", "qcom,sm8350-dp"; reg = <0 0xae90000 0 0x200>, <0 0xae90200 0 0x200>, <0 0xae90400 0 0x600>, <0 0xae91000 0 0x400>, <0 0xae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; #sound-dai-cells = <0>; operating-points-v2 = <&dp_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mdss_dp_in: endpoint { remote-endpoint = <&dpu_intf0_out>; }; }; port@1 { reg = <1>; mdss_dp_out: endpoint { }; }; }; dp_opp_table: opp-table { compatible = "operating-points-v2"; opp-160000000 { opp-hz = /bits/ 64 <160000000>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-270000000 { opp-hz = /bits/ 64 <270000000>; required-opps = <&rpmhpd_opp_svs>; }; opp-540000000 { opp-hz = /bits/ 64 <540000000>; required-opps = <&rpmhpd_opp_svs_l1>; }; opp-810000000 { opp-hz = /bits/ 64 <810000000>; required-opps = <&rpmhpd_opp_nom>; }; }; }; mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, <&dispcc DISP_CC_MDSS_PCLK0_CLK>, <&dispcc DISP_CC_MDSS_ESC0_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>; clock-names = "byte", "byte_intf", "pixel", "core", "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&mdss_dsi0_phy>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; mdss_dsi0_out: endpoint { }; }; }; dsi_opp_table: opp-table { compatible = "operating-points-v2"; opp-187500000 { opp-hz = /bits/ 64 <187500000>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-300000000 { opp-hz = /bits/ 64 <300000000>; required-opps = <&rpmhpd_opp_svs>; }; opp-358000000 { opp-hz = /bits/ 64 <358000000>; required-opps = <&rpmhpd_opp_svs_l1>; }; }; }; mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, <0 0x0ae94900 0 0x260>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; #clock-cells = <1>; #phy-cells = <0>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "ref"; status = "disabled"; }; mdss_dsi1: dsi@ae96000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, <&dispcc DISP_CC_MDSS_PCLK1_CLK>, <&dispcc DISP_CC_MDSS_ESC1_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>; clock-names = "byte", "byte_intf", "pixel", "core", "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; phys = <&mdss_dsi1_phy>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; mdss_dsi1_out: endpoint { }; }; }; }; mdss_dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, <0 0x0ae96900 0 0x260>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; #clock-cells = <1>; #phy-cells = <0>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "ref"; status = "disabled"; }; }; dispcc: clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; reg = <0 0x0af00000 0 0x10000>; power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", "dsi1_phy_pll_out_byteclk", "dsi1_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", "dp_phy_pll_vco_div_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; pdc: interrupt-controller@b220000 { compatible = "qcom,sm8250-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>, <126 716 12>; #interrupt-cells = <2>; interrupt-parent = <&intc>; interrupt-controller; }; tsens0: thermal-sensor@c263000 { compatible = "qcom,sm8250-tsens", "qcom,tsens-v2"; reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <16>; interrupts = , ; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@c265000 { compatible = "qcom,sm8250-tsens", "qcom,tsens-v2"; reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <9>; interrupts = , ; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; aoss_qmp: power-management@c300000 { compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; }; sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, <0x0 0x0c600000 0x0 0x2000000>, <0x0 0x0e600000 0x0 0x0100000>, <0x0 0x0e700000 0x0 0x00a0000>, <0x0 0x0c40a000 0x0 0x0026000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; tlmm: pinctrl@f100000 { compatible = "qcom,sm8250-pinctrl"; reg = <0 0x0f100000 0 0x300000>, <0 0x0f500000 0 0x300000>, <0 0x0f900000 0 0x300000>; reg-names = "west", "south", "north"; interrupts = ; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; cam2_default: cam2-default-state { rst-pins { pins = "gpio78"; function = "gpio"; drive-strength = <2>; bias-disable; }; mclk-pins { pins = "gpio96"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; }; cam2_suspend: cam2-suspend-state { rst-pins { pins = "gpio78"; function = "gpio"; drive-strength = <2>; bias-pull-down; output-low; }; mclk-pins { pins = "gpio96"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; }; cci0_default: cci0-default-state { cci0_i2c0_default: cci0-i2c0-default-pins { /* SDA, SCL */ pins = "gpio101", "gpio102"; function = "cci_i2c"; bias-pull-up; drive-strength = <2>; /* 2 mA */ }; cci0_i2c1_default: cci0-i2c1-default-pins { /* SDA, SCL */ pins = "gpio103", "gpio104"; function = "cci_i2c"; bias-pull-up; drive-strength = <2>; /* 2 mA */ }; }; cci0_sleep: cci0-sleep-state { cci0_i2c0_sleep: cci0-i2c0-sleep-pins { /* SDA, SCL */ pins = "gpio101", "gpio102"; function = "cci_i2c"; drive-strength = <2>; /* 2 mA */ bias-pull-down; }; cci0_i2c1_sleep: cci0-i2c1-sleep-pins { /* SDA, SCL */ pins = "gpio103", "gpio104"; function = "cci_i2c"; drive-strength = <2>; /* 2 mA */ bias-pull-down; }; }; cci1_default: cci1-default-state { cci1_i2c0_default: cci1-i2c0-default-pins { /* SDA, SCL */ pins = "gpio105","gpio106"; function = "cci_i2c"; bias-pull-up; drive-strength = <2>; /* 2 mA */ }; cci1_i2c1_default: cci1-i2c1-default-pins { /* SDA, SCL */ pins = "gpio107","gpio108"; function = "cci_i2c"; bias-pull-up; drive-strength = <2>; /* 2 mA */ }; }; cci1_sleep: cci1-sleep-state { cci1_i2c0_sleep: cci1-i2c0-sleep-pins { /* SDA, SCL */ pins = "gpio105","gpio106"; function = "cci_i2c"; bias-pull-down; drive-strength = <2>; /* 2 mA */ }; cci1_i2c1_sleep: cci1-i2c1-sleep-pins { /* SDA, SCL */ pins = "gpio107","gpio108"; function = "cci_i2c"; bias-pull-down; drive-strength = <2>; /* 2 mA */ }; }; pri_mi2s_active: pri-mi2s-active-state { sclk-pins { pins = "gpio138"; function = "mi2s0_sck"; drive-strength = <8>; bias-disable; }; ws-pins { pins = "gpio141"; function = "mi2s0_ws"; drive-strength = <8>; output-high; }; data0-pins { pins = "gpio139"; function = "mi2s0_data0"; drive-strength = <8>; bias-disable; output-high; }; data1-pins { pins = "gpio140"; function = "mi2s0_data1"; drive-strength = <8>; output-high; }; }; qup_i2c0_default: qup-i2c0-default-state { pins = "gpio28", "gpio29"; function = "qup0"; drive-strength = <2>; bias-disable; }; qup_i2c1_default: qup-i2c1-default-state { pins = "gpio4", "gpio5"; function = "qup1"; drive-strength = <2>; bias-disable; }; qup_i2c2_default: qup-i2c2-default-state { pins = "gpio115", "gpio116"; function = "qup2"; drive-strength = <2>; bias-disable; }; qup_i2c3_default: qup-i2c3-default-state { pins = "gpio119", "gpio120"; function = "qup3"; drive-strength = <2>; bias-disable; }; qup_i2c4_default: qup-i2c4-default-state { pins = "gpio8", "gpio9"; function = "qup4"; drive-strength = <2>; bias-disable; }; qup_i2c5_default: qup-i2c5-default-state { pins = "gpio12", "gpio13"; function = "qup5"; drive-strength = <2>; bias-disable; }; qup_i2c6_default: qup-i2c6-default-state { pins = "gpio16", "gpio17"; function = "qup6"; drive-strength = <2>; bias-disable; }; qup_i2c7_default: qup-i2c7-default-state { pins = "gpio20", "gpio21"; function = "qup7"; drive-strength = <2>; bias-disable; }; qup_i2c8_default: qup-i2c8-default-state { pins = "gpio24", "gpio25"; function = "qup8"; drive-strength = <2>; bias-disable; }; qup_i2c9_default: qup-i2c9-default-state { pins = "gpio125", "gpio126"; function = "qup9"; drive-strength = <2>; bias-disable; }; qup_i2c10_default: qup-i2c10-default-state { pins = "gpio129", "gpio130"; function = "qup10"; drive-strength = <2>; bias-disable; }; qup_i2c11_default: qup-i2c11-default-state { pins = "gpio60", "gpio61"; function = "qup11"; drive-strength = <2>; bias-disable; }; qup_i2c12_default: qup-i2c12-default-state { pins = "gpio32", "gpio33"; function = "qup12"; drive-strength = <2>; bias-disable; }; qup_i2c13_default: qup-i2c13-default-state { pins = "gpio36", "gpio37"; function = "qup13"; drive-strength = <2>; bias-disable; }; qup_i2c14_default: qup-i2c14-default-state { pins = "gpio40", "gpio41"; function = "qup14"; drive-strength = <2>; bias-disable; }; qup_i2c15_default: qup-i2c15-default-state { pins = "gpio44", "gpio45"; function = "qup15"; drive-strength = <2>; bias-disable; }; qup_i2c16_default: qup-i2c16-default-state { pins = "gpio48", "gpio49"; function = "qup16"; drive-strength = <2>; bias-disable; }; qup_i2c17_default: qup-i2c17-default-state { pins = "gpio52", "gpio53"; function = "qup17"; drive-strength = <2>; bias-disable; }; qup_i2c18_default: qup-i2c18-default-state { pins = "gpio56", "gpio57"; function = "qup18"; drive-strength = <2>; bias-disable; }; qup_i2c19_default: qup-i2c19-default-state { pins = "gpio0", "gpio1"; function = "qup19"; drive-strength = <2>; bias-disable; }; qup_spi0_cs: qup-spi0-cs-state { pins = "gpio31"; function = "qup0"; }; qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { pins = "gpio31"; function = "gpio"; }; qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup0"; }; qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup1"; }; qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { pins = "gpio7"; function = "gpio"; }; qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup1"; }; qup_spi2_cs: qup-spi2-cs-state { pins = "gpio118"; function = "qup2"; }; qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { pins = "gpio118"; function = "gpio"; }; qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio115", "gpio116", "gpio117"; function = "qup2"; }; qup_spi3_cs: qup-spi3-cs-state { pins = "gpio122"; function = "qup3"; }; qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { pins = "gpio122"; function = "gpio"; }; qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio119", "gpio120", "gpio121"; function = "qup3"; }; qup_spi4_cs: qup-spi4-cs-state { pins = "gpio11"; function = "qup4"; }; qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { pins = "gpio11"; function = "gpio"; }; qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup4"; }; qup_spi5_cs: qup-spi5-cs-state { pins = "gpio15"; function = "qup5"; }; qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { pins = "gpio15"; function = "gpio"; }; qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup5"; }; qup_spi6_cs: qup-spi6-cs-state { pins = "gpio19"; function = "qup6"; }; qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { pins = "gpio19"; function = "gpio"; }; qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup6"; }; qup_spi7_cs: qup-spi7-cs-state { pins = "gpio23"; function = "qup7"; }; qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { pins = "gpio23"; function = "gpio"; }; qup_spi7_data_clk: qup-spi7-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup7"; }; qup_spi8_cs: qup-spi8-cs-state { pins = "gpio27"; function = "qup8"; }; qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { pins = "gpio27"; function = "gpio"; }; qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio24", "gpio25", "gpio26"; function = "qup8"; }; qup_spi9_cs: qup-spi9-cs-state { pins = "gpio128"; function = "qup9"; }; qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { pins = "gpio128"; function = "gpio"; }; qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio125", "gpio126", "gpio127"; function = "qup9"; }; qup_spi10_cs: qup-spi10-cs-state { pins = "gpio132"; function = "qup10"; }; qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { pins = "gpio132"; function = "gpio"; }; qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio129", "gpio130", "gpio131"; function = "qup10"; }; qup_spi11_cs: qup-spi11-cs-state { pins = "gpio63"; function = "qup11"; }; qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { pins = "gpio63"; function = "gpio"; }; qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup11"; }; qup_spi12_cs: qup-spi12-cs-state { pins = "gpio35"; function = "qup12"; }; qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { pins = "gpio35"; function = "gpio"; }; qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup12"; }; qup_spi13_cs: qup-spi13-cs-state { pins = "gpio39"; function = "qup13"; }; qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { pins = "gpio39"; function = "gpio"; }; qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup13"; }; qup_spi14_cs: qup-spi14-cs-state { pins = "gpio43"; function = "qup14"; }; qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { pins = "gpio43"; function = "gpio"; }; qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup14"; }; qup_spi15_cs: qup-spi15-cs-state { pins = "gpio47"; function = "qup15"; }; qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { pins = "gpio47"; function = "gpio"; }; qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup15"; }; qup_spi16_cs: qup-spi16-cs-state { pins = "gpio51"; function = "qup16"; }; qup_spi16_cs_gpio: qup-spi16-cs-gpio-state { pins = "gpio51"; function = "gpio"; }; qup_spi16_data_clk: qup-spi16-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup16"; }; qup_spi17_cs: qup-spi17-cs-state { pins = "gpio55"; function = "qup17"; }; qup_spi17_cs_gpio: qup-spi17-cs-gpio-state { pins = "gpio55"; function = "gpio"; }; qup_spi17_data_clk: qup-spi17-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup17"; }; qup_spi18_cs: qup-spi18-cs-state { pins = "gpio59"; function = "qup18"; }; qup_spi18_cs_gpio: qup-spi18-cs-gpio-state { pins = "gpio59"; function = "gpio"; }; qup_spi18_data_clk: qup-spi18-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup18"; }; qup_spi19_cs: qup-spi19-cs-state { pins = "gpio3"; function = "qup19"; }; qup_spi19_cs_gpio: qup-spi19-cs-gpio-state { pins = "gpio3"; function = "gpio"; }; qup_spi19_data_clk: qup-spi19-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup19"; }; qup_uart2_default: qup-uart2-default-state { pins = "gpio117", "gpio118"; function = "qup2"; }; qup_uart6_default: qup-uart6-default-state { pins = "gpio16", "gpio17", "gpio18", "gpio19"; function = "qup6"; }; qup_uart12_default: qup-uart12-default-state { pins = "gpio34", "gpio35"; function = "qup12"; }; qup_uart17_default: qup-uart17-default-state { pins = "gpio52", "gpio53", "gpio54", "gpio55"; function = "qup17"; }; qup_uart18_default: qup-uart18-default-state { pins = "gpio58", "gpio59"; function = "qup18"; }; tert_mi2s_active: tert-mi2s-active-state { sck-pins { pins = "gpio133"; function = "mi2s2_sck"; drive-strength = <8>; bias-disable; }; data0-pins { pins = "gpio134"; function = "mi2s2_data0"; drive-strength = <8>; bias-disable; output-high; }; ws-pins { pins = "gpio135"; function = "mi2s2_ws"; drive-strength = <8>; output-high; }; }; sdc2_sleep_state: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; pcie0_default_state: pcie0-default-state { perst-pins { pins = "gpio79"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq-pins { pins = "gpio80"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; wake-pins { pins = "gpio81"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; pcie1_default_state: pcie1-default-state { perst-pins { pins = "gpio82"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq-pins { pins = "gpio83"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; wake-pins { pins = "gpio84"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; pcie2_default_state: pcie2-default-state { perst-pins { pins = "gpio85"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; clkreq-pins { pins = "gpio86"; function = "pci_e2"; drive-strength = <2>; bias-pull-up; }; wake-pins { pins = "gpio87"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; }; apps_smmu: iommu@15000000 { compatible = "qcom,sm8250-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; interrupts = , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ; dma-coherent; }; adsp: remoteproc@17300000 { compatible = "qcom,sm8250-adsp-pas"; reg = <0 0x17300000 0 0x100>; interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; power-domains = <&rpmhpd RPMHPD_LCX>, <&rpmhpd RPMHPD_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&adsp_mem>; qcom,qmp = <&aoss_qmp>; qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; status = "disabled"; glink-edge { interrupts-extended = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>; label = "lpass"; qcom,remote-pid = <2>; apr { compatible = "qcom,apr-v2"; qcom,glink-channels = "apr_audio_svc"; qcom,domain = ; #address-cells = <1>; #size-cells = <0>; service@3 { reg = ; compatible = "qcom,q6core"; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; }; q6afe: service@4 { compatible = "qcom,q6afe"; reg = ; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; q6afedai: dais { compatible = "qcom,q6afe-dais"; #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; }; q6afecc: clock-controller { compatible = "qcom,q6afe-clocks"; #clock-cells = <2>; }; }; q6asm: service@7 { compatible = "qcom,q6asm"; reg = ; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; q6asmdai: dais { compatible = "qcom,q6asm-dais"; #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; iommus = <&apps_smmu 0x1801 0x0>; }; }; q6adm: service@8 { compatible = "qcom,q6adm"; reg = ; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; q6routing: routing { compatible = "qcom,q6adm-routing"; #sound-dai-cells = <0>; }; }; }; fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; compute-cb@3 { compatible = "qcom,fastrpc-compute-cb"; reg = <3>; iommus = <&apps_smmu 0x1803 0x0>; }; compute-cb@4 { compatible = "qcom,fastrpc-compute-cb"; reg = <4>; iommus = <&apps_smmu 0x1804 0x0>; }; compute-cb@5 { compatible = "qcom,fastrpc-compute-cb"; reg = <5>; iommus = <&apps_smmu 0x1805 0x0>; }; }; }; }; intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ interrupts = ; }; watchdog@17c10000 { compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; interrupts = ; }; timer@17c20000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; frame@17c21000 { frame-number = <0>; interrupts = , ; reg = <0x17c21000 0x1000>, <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = ; reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = ; reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = ; reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = ; reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = ; reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = ; reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; apps_rsc: rsc@18200000 { label = "apps_rsc"; compatible = "qcom,rpmh-rsc"; reg = <0x0 0x18200000 0x0 0x10000>, <0x0 0x18210000 0x0 0x10000>, <0x0 0x18220000 0x0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; interrupts = , , ; qcom,tcs-offset = <0xd00>; qcom,drv-id = <2>; qcom,tcs-config = , , , ; power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm8250-rpmh-clk"; #clock-cells = <1>; clock-names = "xo"; clocks = <&xo_board>; }; rpmhpd: power-controller { compatible = "qcom,sm8250-rpmhpd"; #power-domain-cells = <1>; operating-points-v2 = <&rpmhpd_opp_table>; rpmhpd_opp_table: opp-table { compatible = "operating-points-v2"; rpmhpd_opp_ret: opp1 { opp-level = ; }; rpmhpd_opp_min_svs: opp2 { opp-level = ; }; rpmhpd_opp_low_svs: opp3 { opp-level = ; }; rpmhpd_opp_svs: opp4 { opp-level = ; }; rpmhpd_opp_svs_l1: opp5 { opp-level = ; }; rpmhpd_opp_nom: opp6 { opp-level = ; }; rpmhpd_opp_nom_l1: opp7 { opp-level = ; }; rpmhpd_opp_nom_l2: opp8 { opp-level = ; }; rpmhpd_opp_turbo: opp9 { opp-level = ; }; rpmhpd_opp_turbo_l1: opp10 { opp-level = ; }; }; }; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; epss_l3: interconnect@18590000 { compatible = "qcom,sm8250-epss-l3", "qcom,epss-l3"; reg = <0 0x18590000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; #interconnect-cells = <1>; }; cpufreq_hw: cpufreq@18591000 { compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss"; reg = <0 0x18591000 0 0x1000>, <0 0x18592000 0 0x1000>, <0 0x18593000 0 0x1000>; reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; interrupts = , , ; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; #clock-cells = <1>; }; }; sound: sound { }; timer { compatible = "arm,armv8-timer"; interrupts = , , , ; }; thermal-zones { cpu0-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 1>; trips { cpu0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu0_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu0_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu0_alert1>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu1-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 2>; trips { cpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu1_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu1_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu1_alert1>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu2-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 3>; trips { cpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu2_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu2_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu2_alert1>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu3-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 4>; trips { cpu3_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu3_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu3_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu3_alert1>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu4-top-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 7>; trips { cpu4_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu4_top_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu4_top_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu4_top_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu5-top-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 8>; trips { cpu5_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu5_top_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu5_top_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu5_top_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu6-top-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 9>; trips { cpu6_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu6_top_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu6_top_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu6_top_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu7-top-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 10>; trips { cpu7_top_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu7_top_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu7_top_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu7_top_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu4-bottom-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 11>; trips { cpu4_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu4_bottom_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu4_bottom_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu4_bottom_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu5-bottom-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 12>; trips { cpu5_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu5_bottom_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu5_bottom_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu5_bottom_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu6-bottom-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 13>; trips { cpu6_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu6_bottom_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu6_bottom_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu6_bottom_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu7-bottom-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 14>; trips { cpu7_bottom_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpu7_bottom_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu7_bottom_alert0>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu7_bottom_alert1>; cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; aoss0-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 0>; trips { aoss0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; cluster0-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 5>; trips { cluster0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; cluster0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; }; cluster1-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 6>; trips { cluster1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; cluster1_crit: cluster1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; }; gpu-top-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens0 15>; cooling-maps { map0 { trip = <&gpu_top_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { gpu_top_alert0: trip-point0 { temperature = <85000>; hysteresis = <1000>; type = "passive"; }; trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; trip-point2 { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; aoss1-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 0>; trips { aoss1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; wlan-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 1>; trips { wlan_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; video-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 2>; trips { video_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; mem-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 3>; trips { mem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; q6-hvx-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 4>; trips { q6_hvx_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; camera-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 5>; trips { camera_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; compute-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 6>; trips { compute_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; npu-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 7>; trips { npu_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; }; }; }; gpu-bottom-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens1 8>; cooling-maps { map0 { trip = <&gpu_bottom_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { gpu_bottom_alert0: trip-point0 { temperature = <85000>; hysteresis = <1000>; type = "passive"; }; trip-point1 { temperature = <90000>; hysteresis = <1000>; type = "hot"; }; trip-point2 { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; }; };