// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2022, Linaro Limited */ #include #include #include #include #include #include / { thermal-zones { pm8280_1_thermal: pm8280-1-thermal { polling-delay-passive = <100>; thermal-sensors = <&pm8280_1_temp_alarm>; trips { trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; }; trip1 { temperature = <115000>; hysteresis = <0>; type = "critical"; }; }; }; pm8280_2_thermal: pm8280-2-thermal { polling-delay-passive = <100>; thermal-sensors = <&pm8280_2_temp_alarm>; trips { trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; }; trip1 { temperature = <115000>; hysteresis = <0>; type = "critical"; }; }; }; }; }; &spmi_bus { pmk8280: pmic@0 { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pmk8280_pon: pon@1300 { compatible = "qcom,pmk8350-pon"; reg = <0x1300>, <0x800>; reg-names = "hlos", "pbs"; pmk8280_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; linux,code = ; status = "disabled"; }; pmk8280_pon_resin: resin { compatible = "qcom,pmk8350-resin"; interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; status = "disabled"; }; }; pmk8280_vadc: adc@3100 { compatible = "qcom,spmi-adc7"; reg = <0x3100>; interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; channel@3 { reg = ; qcom,pre-scaling = <1 1>; label = "pmk8350_die_temp"; }; channel@44 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "pmk8350_xo_therm"; }; channel@103 { reg = ; qcom,pre-scaling = <1 1>; label = "pmc8280_1_die_temp"; }; channel@303 { reg = ; qcom,pre-scaling = <1 1>; label = "pmc8280_2_die_temp"; }; channel@403 { reg = ; qcom,pre-scaling = <1 1>; label = "pmr735a_die_temp"; }; }; pmk8280_adc_tm: adc-tm@3400 { compatible = "qcom,spmi-adc-tm5-gen2"; reg = <0x3400>; interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; #thermal-sensor-cells = <1>; status = "disabled"; }; pmk8280_rtc: rtc@6100 { compatible = "qcom,pmk8350-rtc"; reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; wakeup-source; status = "disabled"; }; pmk8280_sdam_6: nvram@8500 { compatible = "qcom,spmi-sdam"; reg = <0x8500>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8500 0x100>; status = "disabled"; }; }; pmc8280_1: pmic@1 { compatible = "qcom,pm8350", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pm8280_1_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>; io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; pmc8280_1_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; gpio-ranges = <&pmc8280_1_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; pmc8280c: pmic@2 { compatible = "qcom,pm8350c", "qcom,spmi-pmic"; reg = <0x2 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pmc8280c_gpios: gpio@8800 { compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; gpio-ranges = <&pmc8280c_gpios 0 0 9>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; pmc8280c_lpg: pwm { compatible = "qcom,pm8350c-pwm"; #address-cells = <1>; #size-cells = <0>; #pwm-cells = <2>; status = "disabled"; }; }; pmc8280_2: pmic@3 { compatible = "qcom,pm8350", "qcom,spmi-pmic"; reg = <0x3 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pm8280_2_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>; io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; pmc8280_2_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; gpio-ranges = <&pmc8280_2_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; pmr735a: pmic@4 { compatible = "qcom,pmr735a", "qcom,spmi-pmic"; reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pmr735a_gpios: gpio@8800 { compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; gpio-ranges = <&pmr735a_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; };