// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
 *                          <angelogioacchino.delregno@collabora.com>
 * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
 * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
 */

#include <dt-bindings/clock/qcom,gcc-msm8976.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/qcom-rpmpd.h>

/ {
	interrupt-parent = <&intc>;
	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		CPU0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0>;
			enable-method = "psci";
			cpu-idle-states = <&little_cpu_sleep_0>;
			capacity-dmips-mhz = <573>;
			next-level-cache = <&l2_0>;
			#cooling-cells = <2>;
		};

		CPU1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x1>;
			enable-method = "psci";
			cpu-idle-states = <&little_cpu_sleep_0>;
			capacity-dmips-mhz = <573>;
			next-level-cache = <&l2_0>;
			#cooling-cells = <2>;
		};

		CPU2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x2>;
			enable-method = "psci";
			cpu-idle-states = <&little_cpu_sleep_0>;
			capacity-dmips-mhz = <573>;
			next-level-cache = <&l2_0>;
			#cooling-cells = <2>;
		};

		CPU3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x3>;
			enable-method = "psci";
			cpu-idle-states = <&little_cpu_sleep_0>;
			capacity-dmips-mhz = <573>;
			next-level-cache = <&l2_0>;
			#cooling-cells = <2>;
		};

		CPU4: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x100>;
			enable-method = "psci";
			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&l2_1>;
			#cooling-cells = <2>;
		};

		CPU5: cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x101>;
			enable-method = "psci";
			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&l2_1>;
			#cooling-cells = <2>;
		};

		CPU6: cpu@102 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x102>;
			enable-method = "psci";
			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&l2_1>;
			#cooling-cells = <2>;
		};

		CPU7: cpu@103 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x103>;
			enable-method = "psci";
			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
			capacity-dmips-mhz = <1024>;
			next-level-cache = <&l2_1>;
			#cooling-cells = <2>;
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU0>;
				};

				core1 {
					cpu = <&CPU1>;
				};

				core2 {
					cpu = <&CPU2>;
				};

				core3 {
					cpu = <&CPU3>;
				};
			};

			cluster1 {
				core0 {
					cpu = <&CPU4>;
				};

				core1 {
					cpu = <&CPU5>;
				};

				core2 {
					cpu = <&CPU6>;
				};

				core3 {
					cpu = <&CPU7>;
				};
			};
		};

		idle-states {
			entry-method = "psci";

			little_cpu_sleep_0: cpu-sleep-0-0 {
				compatible = "arm,idle-state";
				idle-state-name = "little-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <181>;
				exit-latency-us = <149>;
				min-residency-us = <703>;
				local-timer-stop;
			};

			big_cpu_sleep_0: cpu-sleep-1-0 {
				compatible = "arm,idle-state";
				idle-state-name = "big-retention";
				arm,psci-suspend-param = <0x00000002>;
				entry-latency-us = <142>;
				exit-latency-us = <99>;
				min-residency-us = <242>;
			};

			big_cpu_sleep_1: cpu-sleep-1-1 {
				compatible = "arm,idle-state";
				idle-state-name = "big-power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <158>;
				exit-latency-us = <144>;
				min-residency-us = <863>;
				local-timer-stop;
			};
		};

		l2_0: l2-cache0 {
			compatible = "cache";
			cache-level = <2>;
			cache-unified;
		};

		l2_1: l2-cache1 {
			compatible = "cache";
			cache-level = <2>;
			cache-unified;
		};
	};

	firmware {
		scm: scm {
			compatible = "qcom,scm-msm8976", "qcom,scm";
			clocks = <&gcc GCC_CRYPTO_CLK>,
				 <&gcc GCC_CRYPTO_AXI_CLK>,
				 <&gcc GCC_CRYPTO_AHB_CLK>;
			clock-names = "core", "bus", "iface";
			#reset-cells = <1>;

			qcom,dload-mode = <&tcsr 0x6100>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0x0 0x80000000 0x0 0x0>;
	};

	pmu-a53 {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	pmu_a72: pmu-a72 {
		compatible = "arm,cortex-a72-pmu";
		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0xf0) | IRQ_TYPE_LEVEL_HIGH)>;
	};


	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	rpm: remoteproc {
		compatible = "qcom,msm8976-rpm-proc", "qcom,rpm-proc";

		smd-edge {
			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
			mboxes = <&apcs 0>;
			qcom,smd-edge = <15>;

			rpm_requests: rpm-requests {
				compatible = "qcom,rpm-msm8976";
				qcom,smd-channels = "rpm_requests";

				rpmcc: clock-controller {
					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
					clocks = <&xo_board>;
					clock-names = "xo";
					#clock-cells = <1>;
				};

				rpmpd: power-controller {
					compatible = "qcom,msm8976-rpmpd";
					#power-domain-cells = <1>;
					operating-points-v2 = <&rpmpd_opp_table>;

					rpmpd_opp_table: opp-table {
						compatible = "operating-points-v2";

						rpmpd_opp_ret: opp1 {
							opp-level = <RPM_SMD_LEVEL_RETENTION>;
						};

						rpmpd_opp_ret_plus: opp2 {
							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
						};

						rpmpd_opp_min_svs: opp3 {
							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
						};

						rpmpd_opp_low_svs: opp4 {
							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
						};

						rpmpd_opp_svs: opp5 {
							opp-level = <RPM_SMD_LEVEL_SVS>;
						};

						rpmpd_opp_svs_plus: opp6 {
							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
						};

						rpmpd_opp_nom: opp7 {
							opp-level = <RPM_SMD_LEVEL_NOM>;
						};

						rpmpd_opp_nom_plus: opp8 {
							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
						};

						rpmpd_opp_turbo: opp9 {
							opp-level = <RPM_SMD_LEVEL_TURBO>;
						};

						rpmpd_opp_turbo_no_cpr: opp10 {
							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
						};

						rpmpd_opp_turbo_high: opp111 {
							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
						};
					};
				};
			};
		};
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		ext-region@85b00000 {
			reg = <0x0 0x85b00000 0x0 0x500000>;
			no-map;
		};

		smem@86300000 {
			compatible = "qcom,smem";
			reg = <0x0 0x86300000 0x0 0x100000>;
			no-map;

			hwlocks = <&tcsr_mutex 3>;
			qcom,rpm-msg-ram = <&rpm_msg_ram>;
		};

		reserved@86400000 {
			reg = <0x0 0x86400000 0x0 0x800000>;
			no-map;
		};

		mpss_mem: mpss@86c00000 {
			reg = <0x0 0x86c00000 0x0 0x5600000>;
			no-map;
		};

		lpass_mem: lpass@8c200000 {
			reg = <0x0 0x8c200000 0x0 0x1000000>;
			no-map;
		};

		wcnss_fw_mem: wcnss@8d200000 {
			reg = <0x0 0x8d200000 0x0 0x800000>;
			no-map;
		};

		venus_mem: memory@8da00000 {
			reg = <0x0 0x8da00000 0x0 0x2600000>;
			no-map;
		};

		tz-apps@8dd00000 {
			reg = <0x0 0x8dd00000 0x0 0x1400000>;
			no-map;
		};
	};

	smp2p-hexagon {
		compatible = "qcom,smp2p";
		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs 10>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;
		qcom,smem = <443>, <429>;

		adsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";

			#qcom,smem-state-cells = <1>;
		};

		adsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-modem {
		compatible = "qcom,smp2p";
		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs 14>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;
		qcom,smem = <435>, <428>;

		modem_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";

			#qcom,smem-state-cells = <1>;
		};

		modem_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-wcnss {
		compatible = "qcom,smp2p";
		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
		mboxes = <&apcs 18>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <4>;
		qcom,smem = <451>, <431>;

		wcnss_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";

			#qcom,smem-state-cells = <1>;
		};

		wcnss_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smsm {
		compatible = "qcom,smsm";

		#address-cells = <1>;
		#size-cells = <0>;

		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;

		apps_smsm: apps@0 {
			reg = <0>;
			#qcom,smem-state-cells = <1>;
		};

		hexagon_smsm: hexagon@1 {
			reg = <1>;
			interrupts = <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		wcnss_smsm: wcnss@6 {
			reg = <6>;
			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	soc: soc@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;
		compatible = "simple-bus";

		rng@22000 {
			compatible = "qcom,prng";
			reg = <0x00022000 0x140>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
		};

		rpm_msg_ram: sram@60000 {
			compatible = "qcom,rpm-msg-ram";
			reg = <0x00060000 0x8000>;
		};

		usb_hs_phy: phy@6c000 {
			compatible = "qcom,usb-hs-28nm-femtophy";
			reg = <0x0006c000 0x200>;
			#phy-cells = <0>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
			clock-names = "ref", "ahb", "sleep";
			resets = <&gcc RST_QUSB2_PHY_BCR>,
				 <&gcc RST_USB2_HS_PHY_ONLY_BCR>;
			reset-names = "phy", "por";
			status = "disabled";
		};

		qfprom: qfprom@a4000 {
			compatible = "qcom,msm8976-qfprom", "qcom,qfprom";
			reg = <0x000a4000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;

			tsens_base1: base1@218 {
				reg = <0x218 1>;
				bits = <0 8>;
			};

			tsens_s0_p1: s0-p1@219 {
				reg = <0x219 0x1>;
				bits = <0 6>;
			};

			tsens_s0_p2: s0-p2@219 {
				reg = <0x219 0x2>;
				bits = <6 6>;
			};

			tsens_s1_p1: s1-p1@21a {
				reg = <0x21a 0x2>;
				bits = <4 6>;
			};

			tsens_s1_p2: s1-p2@21b {
				reg = <0x21b 0x1>;
				bits = <2 6>;
			};

			tsens_s2_p1: s2-p1@21c {
				reg = <0x21c 0x1>;
				bits = <0 6>;
			};

			tsens_s2_p2: s2-p2@21c {
				reg = <0x21c 0x2>;
				bits = <6 6>;
			};

			tsens_s3_p1: s3-p1@21d {
				reg = <0x21d 0x2>;
				bits = <4 6>;
			};

			tsens_s3_p2: s3-p2@21e {
				reg = <0x21e 0x1>;
				bits = <2 6>;
			};

			tsens_base2: base2@220 {
				reg = <0x220 1>;
				bits = <0 8>;
			};

			tsens_s4_p1: s4-p1@221 {
				reg = <0x221 0x1>;
				bits = <0 6>;
			};

			tsens_s4_p2: s4-p2@221 {
				reg = <0x221 0x2>;
				bits = <6 6>;
			};

			tsens_s5_p1: s5-p1@222 {
				reg = <0x222 0x2>;
				bits = <4 6>;
			};

			tsens_s5_p2: s5-p2@223 {
				reg = <0x224 0x1>;
				bits = <2 6>;
			};

			tsens_s6_p1: s6-p1@224 {
				reg = <0x224 0x1>;
				bits = <0 6>;
			};

			tsens_s6_p2: s6-p2@224 {
				reg = <0x224 0x2>;
				bits = <6 6>;
			};

			tsens_s7_p1: s7-p1@225 {
				reg = <0x225 0x2>;
				bits = <4 6>;
			};

			tsens_s7_p2: s7-p2@226 {
				reg = <0x226 0x2>;
				bits = <2 6>;
			};

			tsens_mode: mode@228 {
				reg = <0x228 1>;
				bits = <0 3>;
			};

			tsens_s8_p1: s8-p1@228 {
				reg = <0x228 0x2>;
				bits = <3 6>;
			};

			tsens_s8_p2: s8-p2@229 {
				reg = <0x229 0x1>;
				bits = <1 6>;
			};

			tsens_s9_p1: s9-p1@229 {
				reg = <0x229 0x2>;
				bits = <7 6>;
			};

			tsens_s9_p2: s9-p2@22a {
				reg = <0x22a 0x2>;
				bits = <5 6>;
			};

			tsens_s10_p1: s10-p1@22b {
				reg = <0x22b 0x2>;
				bits = <3 6>;
			};

			tsens_s10_p2: s10-p2@22c {
				reg = <0x22c 0x1>;
				bits = <1 6>;
			};
		};

		tsens: thermal-sensor@4a9000 {
			compatible = "qcom,msm8976-tsens", "qcom,tsens-v1";
			reg = <0x004a9000 0x1000>, /* TM */
			      <0x004a8000 0x1000>; /* SROT */
			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow";
			nvmem-cells = <&tsens_mode>,
				      <&tsens_base1>, <&tsens_base2>,
				      <&tsens_s0_p1>, <&tsens_s0_p2>,
				      <&tsens_s1_p1>, <&tsens_s1_p2>,
				      <&tsens_s2_p1>, <&tsens_s2_p2>,
				      <&tsens_s3_p1>, <&tsens_s3_p2>,
				      <&tsens_s4_p1>, <&tsens_s4_p2>,
				      <&tsens_s5_p1>, <&tsens_s5_p2>,
				      <&tsens_s6_p1>, <&tsens_s6_p2>,
				      <&tsens_s7_p1>, <&tsens_s7_p2>,
				      <&tsens_s8_p1>, <&tsens_s8_p2>,
				      <&tsens_s9_p1>, <&tsens_s9_p2>,
				      <&tsens_s10_p1>, <&tsens_s10_p2>;
			nvmem-cell-names = "mode",
					   "base1", "base2",
					   "s0_p1", "s0_p2",
					   "s1_p1", "s1_p2",
					   "s2_p1", "s2_p2",
					   "s3_p1", "s3_p2",
					   "s4_p1", "s4_p2",
					   "s5_p1", "s5_p2",
					   "s6_p1", "s6_p2",
					   "s7_p1", "s7_p2",
					   "s8_p1", "s8_p2",
					   "s9_p1", "s9_p2",
					   "s10_p1", "s10_p2";
			#qcom,sensors = <11>;
			#thermal-sensor-cells = <1>;
		};

		tlmm: pinctrl@1000000 {
			compatible = "qcom,msm8976-pinctrl";
			reg = <0x01000000 0x300000>;
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			#gpio-cells = <2>;
			gpio-controller;
			gpio-ranges = <&tlmm 0 0 145>;
			interrupt-controller;
			#interrupt-cells = <2>;

			spi1_default: spi0-default-state {
				spi-pins {
					pins = "gpio0", "gpio1", "gpio3";
					function = "blsp_spi1";
					drive-strength = <12>;
					bias-disable;
				};

				cs-pins {
					pins = "gpio2";
					function = "blsp_spi1";
					drive-strength = <2>;
					bias-disable;
				};
			};

			spi1_sleep: spi0-sleep-state {
				spi-pins {
					pins = "gpio0", "gpio1", "gpio3";
					function = "gpio";
					drive-strength = <2>;
					bias-pull-down;
				};

				cs-pins {
					pins = "gpio2";
					function = "gpio";
					drive-strength = <2>;
					bias-disable;
				};
			};

			blsp1_i2c2_default: blsp1-i2c2-default-state {
				pins = "gpio6", "gpio7";
				function = "blsp_i2c2";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
				pins = "gpio6", "gpio7";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c4_default: blsp1-i2c4-default-state {
				pins = "gpio14", "gpio15";
				function = "blsp_i2c4";
				drive-strength = <2>;
				bias-disable;
			};

			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
				pins = "gpio14", "gpio15";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_uart2_active: blsp2-uart2-active-state {
				pins = "gpio20", "gpio21";
				function = "blsp_uart6";
				drive-strength = <4>;
				bias-disable;
			};

			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
				pins = "gpio20", "gpio21";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			/* 4 (not 6!) interfaces per QUP, BLSP2 indexes are numbered (n)+4 */
			blsp2_i2c2_default: blsp2-i2c2-default-state {
				pins = "gpio22", "gpio23";
				function = "blsp_i2c6";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
				pins = "gpio22", "gpio23";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_i2c4_default: blsp2-i2c4-default-state {
				pins = "gpio18", "gpio19";
				function = "blsp_i2c8";
				drive-strength = <2>;
				bias-disable;
			};

			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
				pins = "gpio18", "gpio19";
				function = "gpio";
				drive-strength = <2>;
				bias-disable;
			};

			wcss_wlan_default: wcss-wlan-default-state  {
				wcss-wlan2-pins {
					pins = "gpio40";
					function = "wcss_wlan2";
					drive-strength = <6>;
					bias-pull-up;
				};

				wcss-wlan1-pins {
					pins = "gpio41";
					function = "wcss_wlan1";
					drive-strength = <6>;
					bias-pull-up;
				};

				wcss-wlan0-pins {
					pins = "gpio42";
					function = "wcss_wlan0";
					drive-strength = <6>;
					bias-pull-up;
				};

				wcss-wlan-pins {
					pins = "gpio43", "gpio44";
					function = "wcss_wlan";
					drive-strength = <6>;
					bias-pull-up;
				};
			};
		};

		gcc: clock-controller@1800000 {
			compatible = "qcom,gcc-msm8976";
			reg = <0x01800000 0x80000>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;

			assigned-clocks = <&gcc GPLL3>;
			assigned-clock-rates = <1100000000>;

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
				 <&mdss_dsi0_phy 1>,
				 <&mdss_dsi0_phy 0>,
				 <&mdss_dsi1_phy 1>,
				 <&mdss_dsi1_phy 0>;
			clock-names = "xo",
				      "xo_a",
				      "dsi0pll",
				      "dsi0pllbyte",
				      "dsi1pll",
				      "dsi1pllbyte";
		};

		tcsr_mutex: hwlock@1905000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0x01905000 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr: syscon@1937000 {
			compatible = "qcom,msm8976-tcsr", "syscon";
			reg = <0x01937000 0x30000>;
		};

		mdss: display-subsystem@1a00000 {
			compatible = "qcom,mdss";

			reg = <0x01a00000 0x1000>,
			      <0x01ab0000 0x3000>;
			reg-names = "mdss_phys", "vbif_phys";

			power-domains = <&gcc MDSS_GDSC>;
			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;

			interrupt-controller;
			#interrupt-cells = <1>;

			clocks = <&gcc GCC_MDSS_AHB_CLK>,
				 <&gcc GCC_MDSS_AXI_CLK>,
				 <&gcc GCC_MDSS_VSYNC_CLK>,
				 <&gcc GCC_MDSS_MDP_CLK>;
			clock-names = "iface",
				      "bus",
				      "vsync",
				      "core";

			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			status = "disabled";

			mdss_mdp: display-controller@1a01000 {
				compatible = "qcom,msm8976-mdp5", "qcom,mdp5";
				reg = <0x01a01000 0x89000>;
				reg-names = "mdp_phys";

				interrupt-parent = <&mdss>;
				interrupts = <0>;

				clocks = <&gcc GCC_MDSS_AHB_CLK>,
					 <&gcc GCC_MDSS_AXI_CLK>,
					 <&gcc GCC_MDSS_MDP_CLK>,
					 <&gcc GCC_MDSS_VSYNC_CLK>,
					 <&gcc GCC_MDP_TBU_CLK>,
					 <&gcc GCC_MDP_RT_TBU_CLK>;
				clock-names = "iface",
					      "bus",
					      "core",
					      "vsync",
					      "tbu",
					      "tbu_rt";

				operating-points-v2 = <&mdp_opp_table>;
				power-domains = <&gcc MDSS_GDSC>;

				iommus = <&apps_iommu 22>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_mdp5_intf1_out: endpoint {
							remote-endpoint = <&mdss_dsi0_in>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_mdp5_intf2_out: endpoint {
							remote-endpoint = <&mdss_dsi1_in>;
						};
					};
				};

				mdp_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-177780000 {
						opp-hz = /bits/ 64 <177780000>;
						required-opps = <&rpmpd_opp_svs>;
					};

					opp-270000000 {
						opp-hz = /bits/ 64 <270000000>;
						required-opps = <&rpmpd_opp_svs_plus>;
					};

					opp-320000000 {
						opp-hz = /bits/ 64 <320000000>;
						required-opps = <&rpmpd_opp_nom>;
					};

					opp-360000000 {
						opp-hz = /bits/ 64 <360000000>;
						required-opps = <&rpmpd_opp_turbo>;
					};
				};
			};

			mdss_dsi0: dsi@1a94000 {
				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
				reg = <0x01a94000 0x300>;
				reg-names = "dsi_ctrl";

				interrupt-parent = <&mdss>;
				interrupts = <4>;

				clocks = <&gcc GCC_MDSS_MDP_CLK>,
					 <&gcc GCC_MDSS_AHB_CLK>,
					 <&gcc GCC_MDSS_AXI_CLK>,
					 <&gcc GCC_MDSS_BYTE0_CLK>,
					 <&gcc GCC_MDSS_PCLK0_CLK>,
					 <&gcc GCC_MDSS_ESC0_CLK>;
				clock-names = "mdp_core",
					      "iface",
					      "bus",
					      "byte",
					      "pixel",
					      "core";

				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
				assigned-clock-parents = <&mdss_dsi0_phy 0>,
							 <&mdss_dsi0_phy 1>;

				phys = <&mdss_dsi0_phy>;

				operating-points-v2 = <&dsi0_opp_table>;
				power-domains = <&gcc MDSS_GDSC>;

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_dsi0_in: endpoint {
							remote-endpoint = <&mdss_mdp5_intf1_out>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_dsi0_out: endpoint {
						};
					};
				};

				dsi0_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-125000000 {
						opp-hz = /bits/ 64 <125000000>;
						required-opps = <&rpmpd_opp_svs>;
					};

					opp-161250000 {
						opp-hz = /bits/ 64 <161250000>;
						required-opps = <&rpmpd_opp_svs_plus>;
					};

					opp-187500000 {
						opp-hz = /bits/ 64 <187500000>;
						required-opps = <&rpmpd_opp_nom>;
					};
				};
			};

			mdss_dsi1: dsi@1a96000 {
				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
				reg = <0x01a96000 0x300>;
				reg-names = "dsi_ctrl";

				interrupt-parent = <&mdss>;
				interrupts = <5>;

				clocks = <&gcc GCC_MDSS_MDP_CLK>,
					 <&gcc GCC_MDSS_AHB_CLK>,
					 <&gcc GCC_MDSS_AXI_CLK>,
					 <&gcc GCC_MDSS_BYTE1_CLK>,
					 <&gcc GCC_MDSS_PCLK1_CLK>,
					 <&gcc GCC_MDSS_ESC1_CLK>;
				clock-names = "mdp_core",
					      "iface",
					      "bus",
					      "byte",
					      "pixel",
					      "core";

				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
				assigned-clock-parents = <&mdss_dsi1_phy 0>,
							 <&mdss_dsi1_phy 1>;

				phys = <&mdss_dsi1_phy>;

				operating-points-v2 = <&dsi0_opp_table>;
				power-domains = <&gcc MDSS_GDSC>;

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_dsi1_in: endpoint {
							remote-endpoint = <&mdss_mdp5_intf2_out>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_dsi1_out: endpoint {
						};
					};
				};
			};

			mdss_dsi0_phy: phy@1a94a00 {
				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
				reg = <0x01a94a00 0xd4>,
				      <0x01a94400 0x280>,
				      <0x01a94b80 0x30>;
				reg-names = "dsi_pll",
					    "dsi_phy",
					    "dsi_phy_regulator";

				#clock-cells = <1>;
				#phy-cells = <0>;

				clocks = <&gcc GCC_MDSS_AHB_CLK>,
					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
				clock-names = "iface", "ref";

				status = "disabled";
			};

			mdss_dsi1_phy: phy@1a96a00 {
				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
				reg = <0x01a96a00 0xd4>,
				      <0x01a96400 0x280>,
				      <0x01a96b80 0x30>;
				reg-names = "dsi_pll",
					    "dsi_phy",
					    "dsi_phy_regulator";

				#clock-cells = <1>;
				#phy-cells = <0>;

				clocks = <&gcc GCC_MDSS_AHB_CLK>,
					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
				clock-names = "iface", "ref";

				status = "disabled";
			};
		};

		adreno_gpu: gpu@1c00000 {
			compatible = "qcom,adreno-510.0", "qcom,adreno";

			reg = <0x01c00000 0x40000>;
			reg-names = "kgsl_3d0_reg_memory";

			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "kgsl_3d0_irq";

			clocks = <&gcc GCC_GFX3D_OXILI_CLK>,
				 <&gcc GCC_GFX3D_OXILI_AHB_CLK>,
				 <&gcc GCC_GFX3D_OXILI_GMEM_CLK>,
				 <&gcc GCC_GFX3D_BIMC_CLK>,
				 <&gcc GCC_GFX3D_OXILI_TIMER_CLK>,
				 <&gcc GCC_GFX3D_OXILI_AON_CLK>;
			clock-names = "core",
				      "iface",
				      "mem",
				      "mem_iface",
				      "rbbmtimer",
				      "alwayson";

			power-domains = <&gcc OXILI_GX_GDSC>;

			iommus = <&gpu_iommu 0>;

			operating-points-v2 = <&gpu_opp_table>;

			status = "disabled";

			gpu_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-200000000 {
					opp-hz = /bits/ 64 <200000000>;
					required-opps = <&rpmpd_opp_low_svs>;
					opp-supported-hw = <0xff>;
				};

				opp-300000000 {
					opp-hz = /bits/ 64 <300000000>;
					required-opps = <&rpmpd_opp_svs>;
					opp-supported-hw = <0xff>;
				};

				opp-400000000 {
					opp-hz = /bits/ 64 <400000000>;
					required-opps = <&rpmpd_opp_nom>;
					opp-supported-hw = <0xff>;
				};

				opp-480000000 {
					opp-hz = /bits/ 64 <480000000>;
					required-opps = <&rpmpd_opp_nom_plus>;
					opp-supported-hw = <0xff>;
				};

				opp-540000000 {
					opp-hz = /bits/ 64 <540000000>;
					required-opps = <&rpmpd_opp_turbo>;
					opp-supported-hw = <0xff>;
				};

				opp-600000000 {
					opp-hz = /bits/ 64 <600000000>;
					required-opps = <&rpmpd_opp_turbo>;
					opp-supported-hw = <0xff>;
				};
			};
		};

		apps_iommu: iommu@1ee0000 {
			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
			reg = <0x01ee0000 0x3000>;
			ranges  = <0 0x01e20000 0x20000>;

			clocks = <&gcc GCC_SMMU_CFG_CLK>,
				 <&gcc GCC_APSS_TCU_CLK>;
			clock-names = "iface", "bus";

			qcom,iommu-secure-id = <17>;

			#address-cells = <1>;
			#size-cells = <1>;
			#iommu-cells = <1>;

			/* VFE */
			iommu-ctx@15000 {
				compatible = "qcom,msm-iommu-v2-ns";
				reg = <0x15000 0x1000>;
				qcom,ctx-asid = <20>;
				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
			};

			/* VENUS NS */
			iommu-ctx@16000 {
				compatible = "qcom,msm-iommu-v2-ns";
				reg = <0x16000 0x1000>;
				qcom,ctx-asid = <21>;
				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
			};

			/* MDP0 */
			iommu-ctx@17000 {
				compatible = "qcom,msm-iommu-v2-ns";
				reg = <0x17000 0x1000>;
				qcom,ctx-asid = <22>;
				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		gpu_iommu: iommu@1f08000 {
			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
			ranges = <0 0x01f08000 0x8000>;

			clocks = <&gcc GCC_SMMU_CFG_CLK>,
				 <&gcc GCC_GFX3D_TCU_CLK>;
			clock-names = "iface", "bus";

			power-domains = <&gcc OXILI_CX_GDSC>;

			qcom,iommu-secure-id = <18>;

			#address-cells = <1>;
			#size-cells = <1>;
			#iommu-cells = <1>;

			/* gfx3d user */
			iommu-ctx@0 {
				compatible = "qcom,msm-iommu-v2-ns";
				reg = <0x0 0x1000>;
				qcom,ctx-asid = <0>;
				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
			};

			/* gfx3d secure */
			iommu-ctx@1000 {
				compatible = "qcom,msm-iommu-v2-sec";
				reg = <0x1000 0x1000>;
				qcom,ctx-asid = <2>;
				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
			};

			/* gfx3d priv */
			iommu-ctx@2000 {
				compatible = "qcom,msm-iommu-v2-sec";
				reg = <0x2000 0x1000>;
				qcom,ctx-asid = <1>;
				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		spmi_bus: spmi@200f000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0x0200f000 0x1000>,
			      <0x02400000 0x800000>,
			      <0x02c00000 0x800000>,
			      <0x03800000 0x200000>,
			      <0x0200a000 0x2100>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "periph_irq";
			qcom,channel = <0>;
			qcom,ee = <0>;

			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};

		sdhc_1: mmc@7824900 {
			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
			reg = <0x07824900 0x500>, <0x07824000 0x800>;
			reg-names = "hc", "core";

			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "iface", "core", "xo";
			status = "disabled";
		};

		sdhc_2: mmc@7864900 {
			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
			reg-names = "hc", "core";

			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
				 <&gcc GCC_SDCC2_APPS_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "iface", "core", "xo";
			status = "disabled";
		};

		blsp1_dma: dma-controller@7884000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07884000 0x1f000>;
			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
		};

		blsp1_uart1: serial@78af000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078af000 0x200>;
			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		blsp1_uart2: serial@78b0000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b0000 0x200>;
			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		blsp1_spi1: spi@78b5000 {
			compatible = "qcom,spi-qup-v2.2.1";
			reg = <0x078b5000 0x500>;
			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&spi1_default>;
			pinctrl-1 = <&spi1_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c2: i2c@78b6000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b6000 0x500>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp1_i2c2_default>;
			pinctrl-1 = <&blsp1_i2c2_default>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp1_i2c4: i2c@78b8000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x078b8000 0x500>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp1_i2c4_default>;
			pinctrl-1 = <&blsp1_i2c4_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		otg: usb@78db000 {
			compatible = "qcom,ci-hdrc";
			reg = <0x078db000 0x200>,
			      <0x078db200 0x200>;
			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>;
			clock-names = "iface", "core";
			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
			assigned-clock-rates = <80000000>;
			resets = <&gcc RST_USB_HS_BCR>;
			reset-names = "core";
			ahb-burst-config = <0>;
			dr_mode = "peripheral";
			phy_type = "ulpi";
			phy-names = "usb-phy";
			phys = <&usb_hs_phy>;
			status = "disabled";
			#reset-cells = <1>;
		};

		sdhc_3: mmc@7a24900 {
			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
			reg = <0x07a24900 0x11c>, <0x07a24000 0x800>;
			reg-names = "hc", "core";

			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
				 <&gcc GCC_SDCC3_APPS_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "iface", "core", "xo";

			status = "disabled";
		};

		blsp2_dma: dma-controller@7ac4000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07ac4000 0x1f000>;
			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
		};

		blsp2_uart2: serial@7af0000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x07af0000 0x200>;
			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		blsp2_i2c2: i2c@7af6000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x07af6000 0x600>;
			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp2_i2c2_default>;
			pinctrl-1 = <&blsp2_i2c2_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		blsp2_i2c4: i2c@7af8000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			reg = <0x07af8000 0x600>;
			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
			dma-names = "tx", "rx";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&blsp2_i2c4_default>;
			pinctrl-1 = <&blsp2_i2c4_sleep>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		wcnss: remoteproc@a204000 {
			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
			reg = <0x0a204000 0x2000>,
			      <0x0a202000 0x1000>,
			      <0x0a21b000 0x3000>;
			reg-names = "ccu",
				    "dxe",
				    "pmu";

			memory-region = <&wcnss_fw_mem>;

			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack";

			power-domains = <&rpmpd MSM8976_VDDCX>,
					<&rpmpd MSM8976_VDDMX>;
			power-domain-names = "cx", "mx";

			qcom,smem-states = <&wcnss_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			pinctrl-0 = <&wcss_wlan_default>;
			pinctrl-names = "default";

			status = "disabled";

			wcnss_iris: iris {
				/* Separate chip, compatible is board-specific */
				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
				clock-names = "xo";
			};

			smd-edge {
				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;

				mboxes = <&apcs 17>;
				qcom,smd-edge = <6>;
				qcom,remote-pid = <4>;

				label = "pronto";

				wcnss_ctrl: wcnss {
					compatible = "qcom,wcnss";
					qcom,smd-channels = "WCNSS_CTRL";

					qcom,mmio = <&wcnss>;

					wcnss_bt: bluetooth {
						compatible = "qcom,wcnss-bt";
					};

					wcnss_wifi: wifi {
						compatible = "qcom,wcnss-wlan";

						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
						interrupt-names = "tx", "rx";

						qcom,smem-states = <&apps_smsm 10>,
								   <&apps_smsm 9>;
						qcom,smem-state-names = "tx-enable",
									"tx-rings-empty";
					};
				};
			};
		};

		intc: interrupt-controller@b000000 {
			compatible = "qcom,msm-qgic2";
			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
			interrupt-controller;
			#interrupt-cells = <3>;
		};

		apcs: mailbox@b011000 {
			compatible = "qcom,msm8976-apcs-kpss-global",
				     "qcom,msm8994-apcs-kpss-global", "syscon";
			reg = <0x0b011000 0x1000>;
			#mbox-cells = <1>;
		};

		timer@b120000 {
			compatible = "arm,armv7-timer-mem";
			reg = <0x0b120000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			clock-frequency = <19200000>;

			frame@b121000 {
				reg = <0x0b121000 0x1000>, <0x0b122000 0x1000>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <0>;
			};

			frame@b123000 {
				reg = <0x0b123000 0x1000>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <1>;
				status = "disabled";
			};

			frame@b124000 {
				reg = <0x0b124000 0x1000>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <2>;
				status = "disabled";
			};

			frame@b125000 {
				reg = <0x0b125000 0x1000>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <3>;
				status = "disabled";
			};

			frame@b126000 {
				reg = <0x0b126000 0x1000>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <4>;
				status = "disabled";
			};

			frame@b127000 {
				reg = <0x0b127000 0x1000>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <5>;
				status = "disabled";
			};

			frame@b128000 {
				reg = <0x0b128000 0x1000>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <6>;
				status = "disabled";
			};
		};

		imem: sram@8600000 {
			compatible = "qcom,msm8976-imem", "syscon", "simple-mfd";
			reg = <0x08600000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;

			ranges = <0 0x08600000 0x1000>;

			pil-reloc@94c {
				compatible = "qcom,pil-reloc-info";
				reg = <0x94c 0xc8>;
			};
		};
	};

	thermal-zones {
		aoss0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 0>;

			trips {
				aoss0_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		modem-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 1>;
			trips {
				modem_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		qdsp-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 2>;
			trips {
				qdsp_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		cam-isp-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 3>;
			trips {
				cam_isp_alert0: trip-point0 {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "hot";
				};
			};
		};

		cpu4-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 4>;

			trips {
				cpu4_alert0: trip-point0 {
					temperature = <50000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu4_alert1: trip-point1 {
					temperature = <55000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu4_crit: cpu-crit {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu5-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 5>;

			trips {
				cpu5_alert0: trip-point0 {
					temperature = <50000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu5_alert1: trip-point1 {
					temperature = <55000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu5_crit: cpu-crit {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu6-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 6>;

			trips {
				cpu6_alert0: trip-point0 {
					temperature = <50000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu6_alert1: trip-point1 {
					temperature = <55000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu6_crit: cpu-crit {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu7-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 7>;

			trips {
				cpu7_alert0: trip-point0 {
					temperature = <50000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu7_alert1: trip-point1 {
					temperature = <55000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu7_crit: cpu-crit {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		big-l2-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 8>;

			trips {
				l2_alert0: trip-point0 {
					temperature = <50000>;
					hysteresis = <2000>;
					type = "hot";
				};
				l2_alert1: trip-point1 {
					temperature = <55000>;
					hysteresis = <2000>;
					type = "passive";
				};
				l2_crit: l2-crit {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		cpu0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 9>;

			trips {
				cpu0_alert0: trip-point0 {
					temperature = <50000>;
					hysteresis = <2000>;
					type = "hot";
				};
				cpu0_alert1: trip-point1 {
					temperature = <55000>;
					hysteresis = <2000>;
					type = "passive";
				};
				cpu0_crit: cpu-crit {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		gpu-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 10>;

			trips {
				gpu_alert0: trip-point0 {
					temperature = <50000>;
					hysteresis = <2000>;
					type = "hot";
				};
				gpu_alert1: trip-point1 {
					temperature = <55000>;
					hysteresis = <2000>;
					type = "passive";
				};
				gpu_crit: gpu-crit {
					temperature = <75000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
		clock-frequency = <19200000>;
	};
};