// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. */ #include #include #include #include #include #include #include #include #include / { interrupt-parent = <&intc>; #address-cells = <2>; #size-cells = <2>; chosen { }; memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ reg = <0 0x80000000 0 0>; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; tz-apps@86000000 { reg = <0x0 0x86000000 0x0 0x300000>; no-map; }; smem@86300000 { compatible = "qcom,smem"; reg = <0x0 0x86300000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 3>; qcom,rpm-msg-ram = <&rpm_msg_ram>; }; hypervisor@86400000 { reg = <0x0 0x86400000 0x0 0x100000>; no-map; }; tz@86500000 { reg = <0x0 0x86500000 0x0 0x180000>; no-map; }; reserved@86680000 { reg = <0x0 0x86680000 0x0 0x80000>; no-map; }; rmtfs@86700000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x86700000 0x0 0xe0000>; no-map; qcom,client-id = <1>; }; rfsa@867e0000 { reg = <0x0 0x867e0000 0x0 0x20000>; no-map; }; mpss_mem: mpss@86800000 { /* * The memory region for the mpss firmware is generally * relocatable and could be allocated dynamically. * However, many firmware versions tend to fail when * loaded to some special addresses, so it is hard to * define reliable alloc-ranges. * * alignment = <0x0 0x400000>; * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; */ reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ no-map; status = "disabled"; }; wcnss_mem: wcnss { size = <0x0 0x600000>; alignment = <0x0 0x100000>; alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; status = "disabled"; }; venus_mem: venus { size = <0x0 0x500000>; alignment = <0x0 0x100000>; alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; status = "disabled"; }; mba_mem: mba { size = <0x0 0x100000>; alignment = <0x0 0x100000>; alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; no-map; status = "disabled"; }; }; clocks { xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; }; sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; }; cpus { #address-cells = <1>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; qcom,acc = <&cpu0_acc>; qcom,saw = <&cpu0_saw>; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; qcom,acc = <&cpu1_acc>; qcom,saw = <&cpu1_saw>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; qcom,acc = <&cpu2_acc>; qcom,saw = <&cpu2_saw>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; qcom,acc = <&cpu3_acc>; qcom,saw = <&cpu3_saw>; }; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; }; idle-states { entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; idle-state-name = "standalone-power-collapse"; arm,psci-suspend-param = <0x40000002>; entry-latency-us = <130>; exit-latency-us = <150>; min-residency-us = <2000>; local-timer-stop; }; }; domain-idle-states { CLUSTER_RET: cluster-retention { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x41000012>; entry-latency-us = <500>; exit-latency-us = <500>; min-residency-us = <2000>; }; CLUSTER_PWRDN: cluster-gdhs { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x41000032>; entry-latency-us = <2000>; exit-latency-us = <2000>; min-residency-us = <6000>; }; }; }; cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; opp-800000000 { opp-hz = /bits/ 64 <800000000>; }; opp-998400000 { opp-hz = /bits/ 64 <998400000>; }; }; firmware { scm: scm { compatible = "qcom,scm-msm8916", "qcom,scm"; clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; clock-names = "core", "bus", "iface"; #reset-cells = <1>; qcom,dload-mode = <&tcsr 0x6100>; }; }; pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; }; psci { compatible = "arm,psci-1.0"; method = "smc"; CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP_0>; }; CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP_0>; }; CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP_0>; }; CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP_0>; }; CLUSTER_PD: power-domain-cluster { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; }; }; rpm: remoteproc { compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; smd-edge { interrupts = ; mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8916", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; #clock-cells = <1>; clocks = <&xo_board>; clock-names = "xo"; }; rpmpd: power-controller { compatible = "qcom,msm8916-rpmpd"; #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; rpmpd_opp_ret: opp1 { opp-level = <1>; }; rpmpd_opp_svs_krait: opp2 { opp-level = <2>; }; rpmpd_opp_svs_soc: opp3 { opp-level = <3>; }; rpmpd_opp_nom: opp4 { opp-level = <4>; }; rpmpd_opp_turbo: opp5 { opp-level = <5>; }; rpmpd_opp_super_turbo: opp6 { opp-level = <6>; }; }; }; }; }; }; smp2p-hexagon { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; interrupts = ; mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; hexagon_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; hexagon_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; smp2p-wcnss { compatible = "qcom,smp2p"; qcom,smem = <451>, <431>; interrupts = ; mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; wcnss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; wcnss_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; smsm { compatible = "qcom,smsm"; #address-cells = <1>; #size-cells = <0>; mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; #qcom,smem-state-cells = <1>; }; hexagon_smsm: hexagon@1 { reg = <1>; interrupts = ; interrupt-controller; #interrupt-cells = <2>; }; wcnss_smsm: wcnss@6 { reg = <6>; interrupts = ; interrupt-controller; #interrupt-cells = <2>; }; }; soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; rng@22000 { compatible = "qcom,prng"; reg = <0x00022000 0x200>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; restart@4ab000 { compatible = "qcom,pshold"; reg = <0x004ab000 0x4>; }; qfprom: qfprom@5c000 { compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; reg = <0x0005c000 0x1000>; #address-cells = <1>; #size-cells = <1>; tsens_base1: base1@d0 { reg = <0xd0 0x1>; bits = <0 7>; }; tsens_s0_p1: s0-p1@d0 { reg = <0xd0 0x2>; bits = <7 5>; }; tsens_s0_p2: s0-p2@d1 { reg = <0xd1 0x2>; bits = <4 5>; }; tsens_s1_p1: s1-p1@d2 { reg = <0xd2 0x1>; bits = <1 5>; }; tsens_s1_p2: s1-p2@d2 { reg = <0xd2 0x2>; bits = <6 5>; }; tsens_s2_p1: s2-p1@d3 { reg = <0xd3 0x1>; bits = <3 5>; }; tsens_s2_p2: s2-p2@d4 { reg = <0xd4 0x1>; bits = <0 5>; }; // no tsens with hw_id 3 tsens_s4_p1: s4-p1@d4 { reg = <0xd4 0x2>; bits = <5 5>; }; tsens_s4_p2: s4-p2@d5 { reg = <0xd5 0x1>; bits = <2 5>; }; tsens_s5_p1: s5-p1@d5 { reg = <0xd5 0x2>; bits = <7 5>; }; tsens_s5_p2: s5-p2@d6 { reg = <0xd6 0x2>; bits = <4 5>; }; tsens_base2: base2@d7 { reg = <0xd7 0x1>; bits = <1 7>; }; tsens_mode: mode@ef { reg = <0xef 0x1>; bits = <5 3>; }; }; rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x8000>; }; sram@290000 { compatible = "qcom,msm8916-rpm-stats"; reg = <0x00290000 0x10000>; }; bimc: interconnect@400000 { compatible = "qcom,msm8916-bimc"; reg = <0x00400000 0x62000>; #interconnect-cells = <1>; }; tsens: thermal-sensor@4a9000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; reg = <0x004a9000 0x1000>, /* TM */ <0x004a8000 0x1000>; /* SROT */ // no hw_id 3 nvmem-cells = <&tsens_mode>, <&tsens_base1>, <&tsens_base2>, <&tsens_s0_p1>, <&tsens_s0_p2>, <&tsens_s1_p1>, <&tsens_s1_p2>, <&tsens_s2_p1>, <&tsens_s2_p2>, <&tsens_s4_p1>, <&tsens_s4_p2>, <&tsens_s5_p1>, <&tsens_s5_p2>; nvmem-cell-names = "mode", "base1", "base2", "s0_p1", "s0_p2", "s1_p1", "s1_p2", "s2_p1", "s2_p2", "s4_p1", "s4_p2", "s5_p1", "s5_p2"; #qcom,sensors = <5>; interrupts = ; interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; pcnoc: interconnect@500000 { compatible = "qcom,msm8916-pcnoc"; reg = <0x00500000 0x11000>; #interconnect-cells = <1>; }; snoc: interconnect@580000 { compatible = "qcom,msm8916-snoc"; reg = <0x00580000 0x14000>; #interconnect-cells = <1>; }; stm: stm@802000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x00802000 0x1000>, <0x09280000 0x180000>; reg-names = "stm-base", "stm-stimulus-base"; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; status = "disabled"; out-ports { port { stm_out: endpoint { remote-endpoint = <&funnel0_in7>; }; }; }; }; /* System CTIs */ /* CTI 0 - TMC connections */ cti0: cti@810000 { compatible = "arm,coresight-cti", "arm,primecell"; reg = <0x00810000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; status = "disabled"; }; /* CTI 1 - TPIU connections */ cti1: cti@811000 { compatible = "arm,coresight-cti", "arm,primecell"; reg = <0x00811000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; status = "disabled"; }; /* CTIs 2-11 - no information - not instantiated */ tpiu: tpiu@820000 { compatible = "arm,coresight-tpiu", "arm,primecell"; reg = <0x00820000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; status = "disabled"; in-ports { port { tpiu_in: endpoint { remote-endpoint = <&replicator_out1>; }; }; }; }; funnel0: funnel@821000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x00821000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; status = "disabled"; in-ports { #address-cells = <1>; #size-cells = <0>; /* * Not described input ports: * 0 - connected to Resource and Power Manger CPU ETM * 1 - not-connected * 2 - connected to Modem CPU ETM * 3 - not-connected * 5 - not-connected * 6 - connected trought funnel to Wireless CPU ETM * 7 - connected to STM component */ port@4 { reg = <4>; funnel0_in4: endpoint { remote-endpoint = <&funnel1_out>; }; }; port@7 { reg = <7>; funnel0_in7: endpoint { remote-endpoint = <&stm_out>; }; }; }; out-ports { port { funnel0_out: endpoint { remote-endpoint = <&etf_in>; }; }; }; }; replicator: replicator@824000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0x00824000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; status = "disabled"; out-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; replicator_out0: endpoint { remote-endpoint = <&etr_in>; }; }; port@1 { reg = <1>; replicator_out1: endpoint { remote-endpoint = <&tpiu_in>; }; }; }; in-ports { port { replicator_in: endpoint { remote-endpoint = <&etf_out>; }; }; }; }; etf: etf@825000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x00825000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; status = "disabled"; in-ports { port { etf_in: endpoint { remote-endpoint = <&funnel0_out>; }; }; }; out-ports { port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; }; }; etr: etr@826000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x00826000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; status = "disabled"; in-ports { port { etr_in: endpoint { remote-endpoint = <&replicator_out0>; }; }; }; }; funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x00841000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; status = "disabled"; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; funnel1_in0: endpoint { remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel1_in1: endpoint { remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; funnel1_in2: endpoint { remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; funnel1_in3: endpoint { remote-endpoint = <&etm3_out>; }; }; }; out-ports { port { funnel1_out: endpoint { remote-endpoint = <&funnel0_in4>; }; }; }; }; debug0: debug@850000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x00850000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU0>; status = "disabled"; }; debug1: debug@852000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x00852000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU1>; status = "disabled"; }; debug2: debug@854000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x00854000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU2>; status = "disabled"; }; debug3: debug@856000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x00856000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU3>; status = "disabled"; }; /* Core CTIs; CTIs 12-15 */ /* CTI - CPU-0 */ cti12: cti@858000 { compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", "arm,primecell"; reg = <0x00858000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU0>; arm,cs-dev-assoc = <&etm0>; status = "disabled"; }; /* CTI - CPU-1 */ cti13: cti@859000 { compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", "arm,primecell"; reg = <0x00859000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU1>; arm,cs-dev-assoc = <&etm1>; status = "disabled"; }; /* CTI - CPU-2 */ cti14: cti@85a000 { compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", "arm,primecell"; reg = <0x0085a000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU2>; arm,cs-dev-assoc = <&etm2>; status = "disabled"; }; /* CTI - CPU-3 */ cti15: cti@85b000 { compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", "arm,primecell"; reg = <0x0085b000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; cpu = <&CPU3>; arm,cs-dev-assoc = <&etm3>; status = "disabled"; }; etm0: etm@85c000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x0085c000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; arm,coresight-loses-context-with-cpu; cpu = <&CPU0>; status = "disabled"; out-ports { port { etm0_out: endpoint { remote-endpoint = <&funnel1_in0>; }; }; }; }; etm1: etm@85d000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x0085d000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; arm,coresight-loses-context-with-cpu; cpu = <&CPU1>; status = "disabled"; out-ports { port { etm1_out: endpoint { remote-endpoint = <&funnel1_in1>; }; }; }; }; etm2: etm@85e000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x0085e000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; arm,coresight-loses-context-with-cpu; cpu = <&CPU2>; status = "disabled"; out-ports { port { etm2_out: endpoint { remote-endpoint = <&funnel1_in2>; }; }; }; }; etm3: etm@85f000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x0085f000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; arm,coresight-loses-context-with-cpu; cpu = <&CPU3>; status = "disabled"; out-ports { port { etm3_out: endpoint { remote-endpoint = <&funnel1_in3>; }; }; }; }; tlmm: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x01000000 0x300000>; interrupts = ; gpio-controller; gpio-ranges = <&tlmm 0 0 122>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; blsp_i2c1_default: blsp-i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; blsp_i2c1_sleep: blsp-i2c1-sleep-state { pins = "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp_i2c2_default: blsp-i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; blsp_i2c2_sleep: blsp-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp_i2c3_default: blsp-i2c3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; blsp_i2c3_sleep: blsp-i2c3-sleep-state { pins = "gpio10", "gpio11"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp_i2c4_default: blsp-i2c4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; blsp_i2c4_sleep: blsp-i2c4-sleep-state { pins = "gpio14", "gpio15"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp_i2c5_default: blsp-i2c5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; blsp_i2c5_sleep: blsp-i2c5-sleep-state { pins = "gpio18", "gpio19"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp_i2c6_default: blsp-i2c6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; blsp_i2c6_sleep: blsp-i2c6-sleep-state { pins = "gpio22", "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; }; blsp_spi1_default: blsp-spi1-default-state { spi-pins { pins = "gpio0", "gpio1", "gpio3"; function = "blsp_spi1"; drive-strength = <12>; bias-disable; }; cs-pins { pins = "gpio2"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp_spi1_sleep: blsp-spi1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp_spi2_default: blsp-spi2-default-state { spi-pins { pins = "gpio4", "gpio5", "gpio7"; function = "blsp_spi2"; drive-strength = <12>; bias-disable; }; cs-pins { pins = "gpio6"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp_spi2_sleep: blsp-spi2-sleep-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp_spi3_default: blsp-spi3-default-state { spi-pins { pins = "gpio8", "gpio9", "gpio11"; function = "blsp_spi3"; drive-strength = <12>; bias-disable; }; cs-pins { pins = "gpio10"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp_spi3_sleep: blsp-spi3-sleep-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp_spi4_default: blsp-spi4-default-state { spi-pins { pins = "gpio12", "gpio13", "gpio15"; function = "blsp_spi4"; drive-strength = <12>; bias-disable; }; cs-pins { pins = "gpio14"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp_spi4_sleep: blsp-spi4-sleep-state { pins = "gpio12", "gpio13", "gpio14", "gpio15"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp_spi5_default: blsp-spi5-default-state { spi-pins { pins = "gpio16", "gpio17", "gpio19"; function = "blsp_spi5"; drive-strength = <12>; bias-disable; }; cs-pins { pins = "gpio18"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp_spi5_sleep: blsp-spi5-sleep-state { pins = "gpio16", "gpio17", "gpio18", "gpio19"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp_spi6_default: blsp-spi6-default-state { spi-pins { pins = "gpio20", "gpio21", "gpio23"; function = "blsp_spi6"; drive-strength = <12>; bias-disable; }; cs-pins { pins = "gpio22"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; blsp_spi6_sleep: blsp-spi6-sleep-state { pins = "gpio20", "gpio21", "gpio22", "gpio23"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp_uart1_default: blsp-uart1-default-state { /* TX, RX, CTS_N, RTS_N */ pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "blsp_uart1"; drive-strength = <16>; bias-disable; }; blsp_uart1_sleep: blsp-uart1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; blsp_uart2_default: blsp-uart2-default-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; drive-strength = <16>; bias-disable; }; blsp_uart2_sleep: blsp-uart2-sleep-state { pins = "gpio4", "gpio5"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; camera_front_default: camera-front-default-state { pwdn-pins { pins = "gpio33"; function = "gpio"; drive-strength = <16>; bias-disable; }; rst-pins { pins = "gpio28"; function = "gpio"; drive-strength = <16>; bias-disable; }; mclk1-pins { pins = "gpio27"; function = "cam_mclk1"; drive-strength = <16>; bias-disable; }; }; camera_rear_default: camera-rear-default-state { pwdn-pins { pins = "gpio34"; function = "gpio"; drive-strength = <16>; bias-disable; }; rst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <16>; bias-disable; }; mclk0-pins { pins = "gpio26"; function = "cam_mclk0"; drive-strength = <16>; bias-disable; }; }; cci0_default: cci0-default-state { pins = "gpio29", "gpio30"; function = "cci_i2c"; drive-strength = <16>; bias-disable; }; cdc_dmic_default: cdc-dmic-default-state { clk-pins { pins = "gpio0"; function = "dmic0_clk"; drive-strength = <8>; }; data-pins { pins = "gpio1"; function = "dmic0_data"; drive-strength = <8>; }; }; cdc_dmic_sleep: cdc-dmic-sleep-state { clk-pins { pins = "gpio0"; function = "dmic0_clk"; drive-strength = <2>; bias-disable; }; data-pins { pins = "gpio1"; function = "dmic0_data"; drive-strength = <2>; bias-disable; }; }; cdc_pdm_default: cdc-pdm-default-state { pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "cdc_pdm0"; drive-strength = <8>; bias-disable; }; cdc_pdm_sleep: cdc-pdm-sleep-state { pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "cdc_pdm0"; drive-strength = <2>; bias-pull-down; }; pri_mi2s_default: mi2s-pri-default-state { pins = "gpio113", "gpio114", "gpio115", "gpio116"; function = "pri_mi2s"; drive-strength = <8>; bias-disable; }; pri_mi2s_sleep: mi2s-pri-sleep-state { pins = "gpio113", "gpio114", "gpio115", "gpio116"; function = "pri_mi2s"; drive-strength = <2>; bias-disable; }; pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { pins = "gpio116"; function = "pri_mi2s"; drive-strength = <8>; bias-disable; }; pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { pins = "gpio116"; function = "pri_mi2s"; drive-strength = <2>; bias-disable; }; pri_mi2s_ws_default: mi2s-pri-ws-default-state { pins = "gpio110"; function = "pri_mi2s_ws"; drive-strength = <8>; bias-disable; }; pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { pins = "gpio110"; function = "pri_mi2s_ws"; drive-strength = <2>; bias-disable; }; sec_mi2s_default: mi2s-sec-default-state { pins = "gpio112", "gpio117", "gpio118", "gpio119"; function = "sec_mi2s"; drive-strength = <8>; bias-disable; }; sec_mi2s_sleep: mi2s-sec-sleep-state { pins = "gpio112", "gpio117", "gpio118", "gpio119"; function = "sec_mi2s"; drive-strength = <2>; bias-disable; }; sdc1_default: sdc1-default-state { clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; }; sdc1_sleep: sdc1-sleep-state { clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; }; sdc2_default: sdc2-default-state { clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; sdc2_sleep: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; }; wcss_wlan_default: wcss-wlan-default-state { pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; function = "wcss_wlan"; drive-strength = <6>; bias-pull-up; }; }; gcc: clock-controller@1800000 { compatible = "qcom,gcc-msm8916"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x01800000 0x80000>; clocks = <&xo_board>, <&sleep_clk>, <&mdss_dsi0_phy 1>, <&mdss_dsi0_phy 0>, <0>, <0>, <0>; clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte", "ext_mclk", "ext_pri_i2s", "ext_sec_i2s"; }; tcsr_mutex: hwlock@1905000 { compatible = "qcom,tcsr-mutex"; reg = <0x01905000 0x20000>; #hwlock-cells = <1>; }; tcsr: syscon@1937000 { compatible = "qcom,tcsr-msm8916", "syscon"; reg = <0x01937000 0x30000>; }; mdss: display-subsystem@1a00000 { status = "disabled"; compatible = "qcom,mdss"; reg = <0x01a00000 0x1000>, <0x01ac8000 0x3000>; reg-names = "mdss_phys", "vbif_phys"; power-domains = <&gcc MDSS_GDSC>; clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; clock-names = "iface", "bus", "vsync"; interrupts = ; interrupt-controller; #interrupt-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; mdss_mdp: display-controller@1a01000 { compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; interrupts = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; clock-names = "iface", "bus", "core", "vsync"; iommus = <&apps_iommu 4>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mdss_mdp_intf1_out: endpoint { remote-endpoint = <&mdss_dsi0_in>; }; }; }; }; mdss_dsi0: dsi@1a98000 { compatible = "qcom,msm8916-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a98000 0x25c>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; interrupts = <4>; assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_BYTE0_CLK>, <&gcc GCC_MDSS_PCLK0_CLK>, <&gcc GCC_MDSS_ESC0_CLK>; clock-names = "mdp_core", "iface", "bus", "byte", "pixel", "core"; phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mdss_dsi0_in: endpoint { remote-endpoint = <&mdss_mdp_intf1_out>; }; }; port@1 { reg = <1>; mdss_dsi0_out: endpoint { }; }; }; }; mdss_dsi0_phy: phy@1a98300 { compatible = "qcom,dsi-phy-28nm-lp"; reg = <0x01a98300 0xd4>, <0x01a98500 0x280>, <0x01a98780 0x30>; reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; #clock-cells = <1>; #phy-cells = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; }; }; camss: camss@1b0ac00 { compatible = "qcom,msm8916-camss"; reg = <0x01b0ac00 0x200>, <0x01b00030 0x4>, <0x01b0b000 0x200>, <0x01b00038 0x4>, <0x01b08000 0x100>, <0x01b08400 0x100>, <0x01b0a000 0x500>, <0x01b00020 0x10>, <0x01b10000 0x1000>; reg-names = "csiphy0", "csiphy0_clk_mux", "csiphy1", "csiphy1_clk_mux", "csid0", "csid1", "ispif", "csi_clk_mux", "vfe0"; interrupts = , , , , , ; interrupt-names = "csiphy0", "csiphy1", "csid0", "csid1", "ispif", "vfe0"; power-domains = <&gcc VFE_GDSC>; clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, <&gcc GCC_CAMSS_CSI0_AHB_CLK>, <&gcc GCC_CAMSS_CSI0_CLK>, <&gcc GCC_CAMSS_CSI0PHY_CLK>, <&gcc GCC_CAMSS_CSI0PIX_CLK>, <&gcc GCC_CAMSS_CSI0RDI_CLK>, <&gcc GCC_CAMSS_CSI1_AHB_CLK>, <&gcc GCC_CAMSS_CSI1_CLK>, <&gcc GCC_CAMSS_CSI1PHY_CLK>, <&gcc GCC_CAMSS_CSI1PIX_CLK>, <&gcc GCC_CAMSS_CSI1RDI_CLK>, <&gcc GCC_CAMSS_AHB_CLK>, <&gcc GCC_CAMSS_VFE0_CLK>, <&gcc GCC_CAMSS_CSI_VFE0_CLK>, <&gcc GCC_CAMSS_VFE_AHB_CLK>, <&gcc GCC_CAMSS_VFE_AXI_CLK>; clock-names = "top_ahb", "ispif_ahb", "csiphy0_timer", "csiphy1_timer", "csi0_ahb", "csi0", "csi0_phy", "csi0_pix", "csi0_rdi", "csi1_ahb", "csi1", "csi1_phy", "csi1_pix", "csi1_rdi", "ahb", "vfe0", "csi_vfe0", "vfe_ahb", "vfe_axi"; iommus = <&apps_iommu 3>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; }; port@1 { reg = <1>; }; }; }; cci: cci@1b0c000 { compatible = "qcom,msm8916-cci", "qcom,msm8226-cci"; #address-cells = <1>; #size-cells = <0>; reg = <0x01b0c000 0x1000>; interrupts = ; clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_AHB_CLK>, <&gcc GCC_CAMSS_CCI_CLK>, <&gcc GCC_CAMSS_AHB_CLK>; clock-names = "camss_top_ahb", "cci_ahb", "cci", "camss_ahb"; assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, <&gcc GCC_CAMSS_CCI_CLK>; assigned-clock-rates = <80000000>, <19200000>; pinctrl-names = "default"; pinctrl-0 = <&cci0_default>; status = "disabled"; cci_i2c0: i2c-bus@0 { reg = <0>; clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; }; }; gpu: gpu@1c00000 { compatible = "qcom,adreno-306.0", "qcom,adreno"; reg = <0x01c00000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = ; interrupt-names = "kgsl_3d0_irq"; clock-names = "core", "iface", "mem", "mem_iface", "alt_mem_iface", "gfx3d"; clocks = <&gcc GCC_OXILI_GFX3D_CLK>, <&gcc GCC_OXILI_AHB_CLK>, <&gcc GCC_OXILI_GMEM_CLK>, <&gcc GCC_BIMC_GFX_CLK>, <&gcc GCC_BIMC_GPU_CLK>, <&gcc GFX3D_CLK_SRC>; power-domains = <&gcc OXILI_GDSC>; operating-points-v2 = <&gpu_opp_table>; iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; #cooling-cells = <2>; status = "disabled"; gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; opp-19200000 { opp-hz = /bits/ 64 <19200000>; }; }; }; venus: video-codec@1d00000 { compatible = "qcom,msm8916-venus"; reg = <0x01d00000 0xff000>; interrupts = ; power-domains = <&gcc VENUS_GDSC>; clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, <&gcc GCC_VENUS0_AHB_CLK>, <&gcc GCC_VENUS0_AXI_CLK>; clock-names = "core", "iface", "bus"; iommus = <&apps_iommu 5>; memory-region = <&venus_mem>; status = "disabled"; video-decoder { compatible = "venus-decoder"; }; video-encoder { compatible = "venus-encoder"; }; }; apps_iommu: iommu@1ef0000 { #address-cells = <1>; #size-cells = <1>; #iommu-cells = <1>; compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01e20000 0x20000>; reg = <0x01ef0000 0x3000>; clocks = <&gcc GCC_SMMU_CFG_CLK>, <&gcc GCC_APSS_TCU_CLK>; clock-names = "iface", "bus"; qcom,iommu-secure-id = <17>; /* VFE */ iommu-ctx@3000 { compatible = "qcom,msm-iommu-v1-sec"; reg = <0x3000 0x1000>; interrupts = ; }; /* MDP_0 */ iommu-ctx@4000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x4000 0x1000>; interrupts = ; }; /* VENUS_NS */ iommu-ctx@5000 { compatible = "qcom,msm-iommu-v1-sec"; reg = <0x5000 0x1000>; interrupts = ; }; }; gpu_iommu: iommu@1f08000 { #address-cells = <1>; #size-cells = <1>; #iommu-cells = <1>; compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01f08000 0x10000>; clocks = <&gcc GCC_SMMU_CFG_CLK>, <&gcc GCC_GFX_TCU_CLK>; clock-names = "iface", "bus"; qcom,iommu-secure-id = <18>; /* GFX3D_USER */ iommu-ctx@1000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x1000 0x1000>; interrupts = ; }; /* GFX3D_PRIV */ iommu-ctx@2000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x2000 0x1000>; interrupts = ; }; }; spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, <0x02400000 0x400000>, <0x02c00000 0x400000>, <0x03800000 0x200000>, <0x0200a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = ; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; bam_dmux_dma: dma-controller@4044000 { compatible = "qcom,bam-v1.7.0"; reg = <0x04044000 0x19000>; interrupts = ; #dma-cells = <1>; qcom,ee = <0>; num-channels = <6>; qcom,num-ees = <1>; qcom,powered-remotely; status = "disabled"; }; mpss: remoteproc@4080000 { compatible = "qcom,msm8916-mss-pil"; reg = <0x04080000 0x100>, <0x04020000 0x040>; reg-names = "qdsp6", "rmb"; interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>; power-domain-names = "cx", "mx"; clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, <&gcc GCC_BOOT_ROM_AHB_CLK>, <&xo_board>; clock-names = "iface", "bus", "mem", "xo"; qcom,smem-states = <&hexagon_smp2p_out 0>; qcom,smem-state-names = "stop"; resets = <&scm 0>; reset-names = "mss_restart"; qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; status = "disabled"; mba { memory-region = <&mba_mem>; }; mpss { memory-region = <&mpss_mem>; }; bam_dmux: bam-dmux { compatible = "qcom,bam-dmux"; interrupt-parent = <&hexagon_smsm>; interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "pc", "pc-ack"; qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; qcom,smem-state-names = "pc", "pc-ack"; dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; dma-names = "tx", "rx"; status = "disabled"; }; smd-edge { interrupts = ; qcom,smd-edge = <0>; mboxes = <&apcs 12>; qcom,remote-pid = <1>; label = "hexagon"; apr: apr { compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; qcom,domain = ; #address-cells = <1>; #size-cells = <0>; status = "disabled"; q6core: service@3 { compatible = "qcom,q6core"; reg = ; }; q6afe: service@4 { compatible = "qcom,q6afe"; reg = ; q6afedai: dais { compatible = "qcom,q6afe-dais"; #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; }; }; q6asm: service@7 { compatible = "qcom,q6asm"; reg = ; q6asmdai: dais { compatible = "qcom,q6asm-dais"; #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; }; }; q6adm: service@8 { compatible = "qcom,q6adm"; reg = ; q6routing: routing { compatible = "qcom,q6adm-routing"; #sound-dai-cells = <0>; }; }; }; fastrpc { compatible = "qcom,fastrpc"; qcom,smd-channels = "fastrpcsmd-apps-dsp"; label = "adsp"; qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; cb@1 { compatible = "qcom,fastrpc-compute-cb"; reg = <1>; }; }; }; }; sound: sound@7702000 { status = "disabled"; compatible = "qcom,apq8016-sbc-sndcard"; reg = <0x07702000 0x4>, <0x07702004 0x4>; reg-names = "mic-iomux", "spkr-iomux"; }; lpass: audio-controller@7708000 { status = "disabled"; compatible = "qcom,apq8016-lpass-cpu"; /* * Note: Unlike the name would suggest, the SEC_I2S_CLK * is actually only used by Tertiary MI2S while * Primary/Secondary MI2S both use the PRI_I2S_CLK. */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; clock-names = "ahbix-clk", "mi2s-bit-clk0", "mi2s-bit-clk1", "mi2s-bit-clk2", "mi2s-bit-clk3", "pcnoc-mport-clk", "pcnoc-sway-clk"; #sound-dai-cells = <1>; interrupts = ; interrupt-names = "lpass-irq-lpaif"; reg = <0x07708000 0x10000>; reg-names = "lpass-lpaif"; #address-cells = <1>; #size-cells = <0>; }; lpass_codec: audio-codec@771c000 { compatible = "qcom,msm8916-wcd-digital-codec"; reg = <0x0771c000 0x400>; clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "ahbix-clk", "mclk"; #sound-dai-cells = <1>; status = "disabled"; }; sdhc_1: mmc@7824900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc1_default>; pinctrl-1 = <&sdc1_sleep>; pinctrl-names = "default", "sleep"; mmc-ddr-1_8v; bus-width = <8>; non-removable; status = "disabled"; }; sdhc_2: mmc@7864900 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc", "core"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc2_default>; pinctrl-1 = <&sdc2_sleep>; pinctrl-names = "default", "sleep"; bus-width = <4>; status = "disabled"; }; blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = ; clocks = <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; }; blsp_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; interrupts = ; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 0>, <&blsp_dma 1>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_uart1_default>; pinctrl-1 = <&blsp_uart1_sleep>; status = "disabled"; }; blsp_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b0000 0x200>; interrupts = ; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 2>, <&blsp_dma 3>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_uart2_default>; pinctrl-1 = <&blsp_uart2_sleep>; status = "disabled"; }; blsp_i2c1: i2c@78b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b5000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_i2c1_default>; pinctrl-1 = <&blsp_i2c1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b5000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 4>, <&blsp_dma 5>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_spi1_default>; pinctrl-1 = <&blsp_spi1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_i2c2_default>; pinctrl-1 = <&blsp_i2c2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_spi2: spi@78b6000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b6000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 6>, <&blsp_dma 7>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_spi2_default>; pinctrl-1 = <&blsp_spi2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_i2c3: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b7000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_i2c3_default>; pinctrl-1 = <&blsp_i2c3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_spi3: spi@78b7000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b7000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 8>, <&blsp_dma 9>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_spi3_default>; pinctrl-1 = <&blsp_spi3_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_i2c4_default>; pinctrl-1 = <&blsp_i2c4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_spi4: spi@78b8000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b8000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 10>, <&blsp_dma 11>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_spi4_default>; pinctrl-1 = <&blsp_spi4_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_i2c5: i2c@78b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b9000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_i2c5_default>; pinctrl-1 = <&blsp_i2c5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_spi5: spi@78b9000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b9000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_spi5_default>; pinctrl-1 = <&blsp_spi5_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078ba000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_i2c6_default>; pinctrl-1 = <&blsp_i2c6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; blsp_spi6: spi@78ba000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078ba000 0x500>; interrupts = ; clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp_spi6_default>; pinctrl-1 = <&blsp_spi6_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; usb: usb@78d9000 { compatible = "qcom,ci-hdrc"; reg = <0x078d9000 0x200>, <0x078d9200 0x200>; interrupts = , ; clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>; clock-names = "iface", "core"; assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; assigned-clock-rates = <80000000>; resets = <&gcc GCC_USB_HS_BCR>; reset-names = "core"; phy_type = "ulpi"; dr_mode = "otg"; hnp-disable; srp-disable; adp-disable; ahb-burst-config = <0>; phy-names = "usb-phy"; phys = <&usb_hs_phy>; status = "disabled"; #reset-cells = <1>; ulpi { usb_hs_phy: phy { compatible = "qcom,usb-hs-phy-msm8916", "qcom,usb-hs-phy"; #phy-cells = <0>; clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; clock-names = "ref", "sleep"; resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; reset-names = "phy", "por"; qcom,init-seq = /bits/ 8 <0x0 0x44>, <0x1 0x6b>, <0x2 0x24>, <0x3 0x13>; }; }; }; wcnss: remoteproc@a204000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; memory-region = <&wcnss_mem>; interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>; power-domain-names = "cx", "mx"; qcom,smem-states = <&wcnss_smp2p_out 0>; qcom,smem-state-names = "stop"; pinctrl-names = "default"; pinctrl-0 = <&wcss_wlan_default>; status = "disabled"; wcnss_iris: iris { /* Separate chip, compatible is board-specific */ clocks = <&rpmcc RPM_SMD_RF_CLK2>; clock-names = "xo"; }; smd-edge { interrupts = ; mboxes = <&apcs 17>; qcom,smd-edge = <6>; qcom,remote-pid = <4>; label = "pronto"; wcnss_ctrl: wcnss { compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; qcom,mmio = <&wcnss>; wcnss_bt: bluetooth { compatible = "qcom,wcnss-bt"; }; wcnss_wifi: wifi { compatible = "qcom,wcnss-wlan"; interrupts = , ; interrupt-names = "tx", "rx"; qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; qcom,smem-state-names = "tx-enable", "tx-rings-empty"; }; }; }; }; intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; #interrupt-cells = <3>; reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, <0x0b001000 0x1000>, <0x0b004000 0x2000>; interrupts = ; }; apcs: mailbox@b011000 { compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; clocks = <&a53pll>, <&gcc GPLL0_VOTE>; clock-names = "pll", "aux"; #clock-cells = <0>; }; a53pll: clock@b016000 { compatible = "qcom,msm8916-a53pll"; reg = <0x0b016000 0x40>; #clock-cells = <0>; clocks = <&xo_board>; clock-names = "xo"; }; timer@b020000 { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "arm,armv7-timer-mem"; reg = <0x0b020000 0x1000>; clock-frequency = <19200000>; frame@b021000 { frame-number = <0>; interrupts = , ; reg = <0x0b021000 0x1000>, <0x0b022000 0x1000>; }; frame@b023000 { frame-number = <1>; interrupts = ; reg = <0x0b023000 0x1000>; status = "disabled"; }; frame@b024000 { frame-number = <2>; interrupts = ; reg = <0x0b024000 0x1000>; status = "disabled"; }; frame@b025000 { frame-number = <3>; interrupts = ; reg = <0x0b025000 0x1000>; status = "disabled"; }; frame@b026000 { frame-number = <4>; interrupts = ; reg = <0x0b026000 0x1000>; status = "disabled"; }; frame@b027000 { frame-number = <5>; interrupts = ; reg = <0x0b027000 0x1000>; status = "disabled"; }; frame@b028000 { frame-number = <6>; interrupts = ; reg = <0x0b028000 0x1000>; status = "disabled"; }; }; cpu0_acc: power-manager@b088000 { compatible = "qcom,msm8916-acc"; reg = <0x0b088000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; cpu0_saw: power-manager@b089000 { compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; reg = <0x0b089000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; cpu1_acc: power-manager@b098000 { compatible = "qcom,msm8916-acc"; reg = <0x0b098000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; cpu1_saw: power-manager@b099000 { compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; reg = <0x0b099000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; cpu2_acc: power-manager@b0a8000 { compatible = "qcom,msm8916-acc"; reg = <0x0b0a8000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; cpu2_saw: power-manager@b0a9000 { compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; reg = <0x0b0a9000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; cpu3_acc: power-manager@b0b8000 { compatible = "qcom,msm8916-acc"; reg = <0x0b0b8000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; cpu3_saw: power-manager@b0b9000 { compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; reg = <0x0b0b9000 0x1000>; status = "reserved"; /* Controlled by PSCI firmware */ }; }; thermal-zones { cpu0-1-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens 5>; trips { cpu0_1_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; cpu0_1_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu0_1_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu2-3-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens 4>; trips { cpu2_3_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; cpu2_3_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu2_3_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; gpu-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens 2>; cooling-maps { map0 { trip = <&gpu_alert0>; cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; trips { gpu_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; gpu_crit: gpu-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; }; }; }; camera-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens 1>; trips { cam_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "hot"; }; }; }; modem-thermal { polling-delay-passive = <250>; thermal-sensors = <&tsens 0>; trips { modem_alert0: trip-point0 { temperature = <85000>; hysteresis = <2000>; type = "hot"; }; }; }; }; timer { compatible = "arm,armv8-timer"; interrupts = , , , ; }; };