// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (C) 2024 Arm Ltd.
 */

/dts-v1/;

#include "sun50i-h616.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "Tanix TX1";
	compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";

	aliases {
		serial0 = &uart0;
		ethernet0 = &sdio_wifi;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys";

		key {
			label = "hidden";
			linux,code = <BTN_0>;
			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
		};
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
			default-state = "on";
		};
	};

	wifi_pwrseq: pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rtc CLK_OSC32K_FANOUT>;
		clock-names = "ext_clock";
		pinctrl-0 = <&x32clk_fanout_pin>;
		pinctrl-names = "default";
		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
	};

	reg_vcc5v: vcc5v {
		/* board wide 5V supply directly from the DC input */
		compatible = "regulator-fixed";
		regulator-name = "vcc-5v";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};
};

&codec {
	allwinner,audio-routing = "Line Out", "LINEOUT";
	status = "okay";
};

&cpu0 {
	cpu-supply = <&reg_dcdc2>;
};

&ehci0 {
	status = "okay";
};

&ir {
	status = "okay";
};

&mmc1 {
	vmmc-supply = <&reg_dldo1>;
	vqmmc-supply = <&reg_aldo1>;
	mmc-pwrseq = <&wifi_pwrseq>;
	bus-width = <4>;
	non-removable;
	status = "okay";

	sdio_wifi: wifi@1 {
		reg = <1>;
	};
};

&mmc2 {
	vmmc-supply = <&reg_dldo1>;
	vqmmc-supply = <&reg_aldo1>;
	bus-width = <8>;
	non-removable;
	max-frequency = <100000000>;
	cap-mmc-hw-reset;
	mmc-ddr-1_8v;
	status = "okay";
};

&ohci0 {
	status = "okay";
};

&pio {
	vcc-pc-supply = <&reg_aldo1>;
	vcc-pf-supply = <&reg_dldo1>;
	vcc-pg-supply = <&reg_aldo1>;
	vcc-ph-supply = <&reg_dldo1>;
	vcc-pi-supply = <&reg_dldo1>;
};

&r_i2c {
	status = "okay";

	axp313: pmic@36 {
		compatible = "x-powers,axp313a";
		reg = <0x36>;
		#interrupt-cells = <1>;
		interrupt-controller;

		vin1-supply = <&reg_vcc5v>;
		vin2-supply = <&reg_vcc5v>;
		vin3-supply = <&reg_vcc5v>;

		regulators {
			/* Supplies VCC-PLL, so needs to be always on. */
			reg_aldo1: aldo1 {
				regulator-always-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc1v8";
			};

			/* Supplies VCC-IO, so needs to be always on. */
			reg_dldo1: dldo1 {
				regulator-always-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc3v3";
			};

			reg_dcdc1: dcdc1 {
				regulator-always-on;
				regulator-min-microvolt = <810000>;
				regulator-max-microvolt = <990000>;
				regulator-name = "vdd-gpu-sys";
			};

			reg_dcdc2: dcdc2 {
				regulator-always-on;
				regulator-min-microvolt = <810000>;
				regulator-max-microvolt = <1120000>;
				regulator-name = "vdd-cpu";
			};

			reg_dcdc3: dcdc3 {
				regulator-always-on;
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-name = "vdd-dram";
			};
		};
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_ph_pins>;
	status = "okay";
};

&usbotg {
	dr_mode = "host";       /* USB A type receptable */
	status = "okay";
};

&usbphy {
	status = "okay";
};