/* * Copyright 2017 Gateworks Corporation * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include #include #include / { /* these are used by bootloader for disabling nodes */ aliases { ethernet0 = &fec; ethernet1 = &lan1; ethernet2 = &lan2; ethernet3 = &lan3; ethernet4 = &lan4; led0 = &led0; led1 = &led1; led2 = &led2; usb0 = &usbh1; usb1 = &usbotg; }; chosen { stdout-path = &uart2; }; backlight { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; }; gpio-keys { compatible = "gpio-keys"; user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = ; }; user-pb1x { label = "user_pb1x"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <0>; }; key-erased { label = "key-erased"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <1>; }; eeprom-wp { label = "eeprom_wp"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <2>; }; tamper { label = "tamper"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <5>; }; switch-hold { label = "switch_hold"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <7>; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; led0: led-user1 { label = "user1"; gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: led-user2 { label = "user2"; gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: led-user3 { label = "user3"; gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; memory@10000000 { device_type = "memory"; reg = <0x10000000 0x40000000>; }; pps { compatible = "pps-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pps>; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; }; reg_1p0v: regulator-1p0v { compatible = "regulator-fixed"; regulator-name = "1P0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; status = "okay"; fixed-link { speed = <1000>; full-duplex; }; mdio { #address-cells = <1>; #size-cells = <0>; switch@0 { compatible = "marvell,mv88e6085"; reg = <0>; mdio { #address-cells = <1>; #size-cells = <0>; sw_phy0: ethernet-phy@0 { reg = <0x0>; }; sw_phy1: ethernet-phy@1 { reg = <0x1>; }; sw_phy2: ethernet-phy@2 { reg = <0x2>; }; sw_phy3: ethernet-phy@3 { reg = <0x3>; }; }; ports { #address-cells = <1>; #size-cells = <0>; lan4: port@0 { reg = <0>; label = "lan4"; phy-handle = <&sw_phy0>; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@1 { reg = <1>; label = "lan3"; phy-handle = <&sw_phy1>; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@2 { reg = <2>; label = "lan2"; phy-handle = <&sw_phy2>; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan1: port@3 { reg = <3>; label = "lan1"; phy-handle = <&sw_phy3>; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; port@5 { reg = <5>; ethernet = <&fec>; phy-mode = "rgmii-id"; fixed-link { speed = <1000>; full-duplex; }; }; }; }; }; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; gsc: gsc@20 { compatible = "gw,gsc"; reg = <0x20>; interrupt-parent = <&gpio1>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; #size-cells = <0>; adc { compatible = "gw,gsc-adc"; #address-cells = <1>; #size-cells = <0>; channel@0 { gw,mode = <0>; reg = <0x00>; label = "temp"; }; channel@2 { gw,mode = <1>; reg = <0x02>; label = "vdd_vin"; }; channel@5 { gw,mode = <1>; reg = <0x05>; label = "vdd_3p3"; }; channel@8 { gw,mode = <1>; reg = <0x08>; label = "vdd_bat"; }; channel@b { gw,mode = <1>; reg = <0x0b>; label = "vdd_5p0"; }; channel@e { gw,mode = <1>; reg = <0xe>; label = "vdd_arm"; }; channel@11 { gw,mode = <1>; reg = <0x11>; label = "vdd_soc"; }; channel@14 { gw,mode = <1>; reg = <0x14>; label = "vdd_3p0"; }; channel@17 { gw,mode = <1>; reg = <0x17>; label = "vdd_1p5"; }; channel@1d { gw,mode = <1>; reg = <0x1d>; label = "vdd_1p8"; }; channel@20 { gw,mode = <1>; reg = <0x20>; label = "vdd_an1"; }; channel@23 { gw,mode = <1>; reg = <0x23>; label = "vdd_2p5"; }; }; }; gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gsc>; interrupts = <4>; }; eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; eeprom2: eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; }; eeprom3: eeprom@52 { compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; }; eeprom4: eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; }; dts1672: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; magn@1c { compatible = "st,lsm9ds1-magn"; reg = <0x1c>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mag>; interrupt-parent = <&gpio5>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; ltc3676: pmic@3c { compatible = "lltc,ltc3676"; reg = <0x3c>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; regulators { /* VDD_SOC (1+R1/R2 = 1.635) */ reg_vdd_soc: sw1 { regulator-name = "vddsoc"; regulator-min-microvolt = <674400>; regulator-max-microvolt = <1308000>; lltc,fb-voltage-divider = <127000 200000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; /* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */ reg_1p8v: sw2 { regulator-name = "vdd1p8"; regulator-min-microvolt = <1033310>; regulator-max-microvolt = <2004000>; lltc,fb-voltage-divider = <301000 200000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; /* VDD_ARM (1+R1/R2 = 1.635) */ reg_vdd_arm: sw3 { regulator-name = "vddarm"; regulator-min-microvolt = <674400>; regulator-max-microvolt = <1308000>; lltc,fb-voltage-divider = <127000 200000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; /* VDD_DDR (1+R1/R2 = 2.105) */ reg_vdd_ddr: sw4 { regulator-name = "vddddr"; regulator-min-microvolt = <868310>; regulator-max-microvolt = <1684000>; lltc,fb-voltage-divider = <221000 200000>; regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; }; /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ reg_2p5v: ldo2 { regulator-name = "vdd2p5"; regulator-min-microvolt = <2490375>; regulator-max-microvolt = <2490375>; lltc,fb-voltage-divider = <487000 200000>; regulator-boot-on; regulator-always-on; }; /* VDD_HIGH (1+R1/R2 = 4.17) */ reg_3p0v: ldo4 { regulator-name = "vdd3p0"; regulator-min-microvolt = <3023250>; regulator-max-microvolt = <3023250>; lltc,fb-voltage-divider = <634000 200000>; regulator-boot-on; regulator-always-on; }; }; }; crypto@60 { compatible = "atmel,atecc508a"; reg = <0x60>; }; imu@6a { compatible = "st,lsm9ds1-imu"; reg = <0x6a>; st,drdy-int-pin = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_imu>; interrupt-parent = <&gpio4>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; egalax_ts: touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; interrupts = <11 IRQ_TYPE_EDGE_FALLING>; wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; &ldb { status = "okay"; lvds-channel@0 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; status = "okay"; display-timings { native-mode = <&timing0>; timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; hback-porch = <220>; hfront-porch = <40>; vback-porch = <21>; vfront-porch = <7>; hsync-len = <60>; vsync-len = <10>; }; }; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ status = "disabled"; }; &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ status = "disabled"; }; &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; uart-has-rtscts; status = "okay"; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; uart-has-rtscts; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; non-removable; vmmc-supply = <®_3p3v>; keep-power-in-suspend; status = "okay"; }; &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; }; &iomuxc { pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ >; }; pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_imu: imugrp { fsl,pins = < MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 >; }; pinctrl_mag: maggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ >; }; pinctrl_pmic: pmicgrp { fsl,pins = < MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */ >; }; pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 >; }; pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 >; }; pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; pinctrl_usdhc3_100mhz: usdhc3grp100mhz { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 >; }; pinctrl_usdhc3_200mhz: usdhc3grp200mhz { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 >; }; };