// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2013 Marek Vasut */ /dts-v1/; #include "imx53-m53.dtsi" / { model = "Aries/DENX M53EVK"; compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53"; display1: disp1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1>; display-timings { native-mode = <&timing0>; timing0: timing-800x480p60 { clock-frequency = <31500000>; hactive = <800>; vactive = <480>; hfront-porch = <40>; hback-porch = <88>; hsync-len = <128>; vback-porch = <33>; vfront-porch = <9>; vsync-len = <3>; vsync-active = <1>; }; }; port { display1_in: endpoint { remote-endpoint = <&ipu_di1_disp1>; }; }; }; backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 3000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_backlight>; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pin_gpio>; led-user1 { label = "user1"; gpios = <&gpio2 8 0>; linux,default-trigger = "heartbeat"; }; led-user2 { label = "user2"; gpios = <&gpio2 9 0>; linux,default-trigger = "heartbeat"; }; }; reg_usbh1_vbus: regulator-usbh1-vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 2 0>; }; reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 4 0>; }; sound { compatible = "fsl,imx53-m53evk-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx53-m53evk-sgtl5000"; ssi-controller = <&ssi2>; audio-codec = <&sgtl5000>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "LINE_IN", "Line In Jack", "Headphone Jack", "HP_OUT", "Ext Spk", "LINE_OUT"; mux-int-port = <2>; mux-ext-port = <4>; }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1>; status = "okay"; }; &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can2>; status = "okay"; }; &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; status = "okay"; }; &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; }; }; &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx53-m53evk { pinctrl_usb: usbgrp { fsl,pins = < MX53_PAD_GPIO_2__GPIO1_2 0x80000000 MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX53_PAD_GPIO_4__GPIO1_4 0x000b0 >; }; led_pin_gpio: led_gpio { fsl,pins = < MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 >; }; pinctrl_audmux: audmuxgrp { fsl,pins = < MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 >; }; pinctrl_can1: can1grp { fsl,pins = < MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 >; }; pinctrl_can2: can2grp { fsl,pins = < MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 >; }; pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 >; }; pinctrl_fec: fecgrp { fsl,pins = < MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 >; }; pinctrl_ipu_disp1: ipudisp1grp { fsl,pins = < MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5 MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5 MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5 MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5 MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5 MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5 MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5 MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5 MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5 MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5 MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5 MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5 MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5 MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5 MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5 MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5 MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5 MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5 MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5 MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5 MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5 MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5 MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5 MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5 MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5 MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5 MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5 MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5 MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5 MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5 MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5 MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; }; }; &ipu_di1_disp1 { remote-endpoint = <&display1_in>; }; &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &sata { status = "okay"; }; &ssi2 { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; status = "okay"; }; &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; dr_mode = "otg"; vbus-supply = <®_usb_otg_vbus>; disable-over-current; status = "okay"; };