// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause // Copyright 2021 Jonathan Neuschäfer /dts-v1/; /* The last 16 MiB are dedicated to the GPU */ /memreserve/ 0x07000000 0x01000000; #include "nuvoton-wpcm450.dtsi" #include #include / { model = "Supermicro X9SCi-LN4F BMC"; compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450"; aliases { serial0 = &serial0; serial1 = &serial1; }; chosen { stdout-path = "serial0:115200n8"; }; memory@0 { device_type = "memory"; reg = <0 0x08000000>; /* 128 MiB */ }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&key_pins>; button-uid { label = "UID button"; linux,code = ; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; }; gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; led-uid { label = "UID"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led-heartbeat { label = "heartbeat"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; }; }; &fiu { status = "okay"; flash@0 { reg = <0>; compatible = "jedec,spi-nor"; }; }; &gpio0 { gpio-line-names = /* 0 */ "", "host-reset-control-n", "", "", "", "", "", "", /* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", ""; }; &gpio1 { gpio-line-names = /* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid", /* 8 */ "", "", "", "", "", "", "", ""; }; &gpio4 { gpio-line-names = /* 0 */ "", "", "", "", "", "", "", "", /* 8 */ "", "", "", "", "", "", "", "power-chassis-good"; }; &pinctrl { key_pins: mux-keys { groups = "gspi", "sspi"; function = "gpio"; }; led_pins: mux-leds { groups = "hg3", "hg0", "pwm4"; function = "gpio"; }; }; &serial0 { /* * Debug serial port. TX is exposed on the right pad of unpopulated * resistor R1247, RX on the right pad of R1162. */ status = "okay"; }; &serial1 { /* "Serial over LAN" port. Connected to ttyS2 of the host system. */ status = "okay"; };