# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/fsl/fsl,qman.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: QorIQ DPAA Queue Manager

maintainers:
  - Frank Li <Frank.Li@nxp.com>

description:
  The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
  supports queuing and QoS scheduling of frames to CPUs, network interfaces and
  DPAA logic modules, maintains packet ordering within flows. Besides providing
  flow-level queuing, is also responsible for congestion management functions such
  as RED/WRED, congestion notifications and tail discards. This binding covers the
  CCSR space programming model

properties:
  compatible:
    oneOf:
      - const: fsl,qman
      - items:
          - enum:
              - fsl,ls1043a-qman
              - fsl,ls1046a-qman
          - const: fsl,qman
  reg:
    items:
      - description: |
          Registers region within the CCSR address space

          The QMan revision information is located in the QMAN_IP_REV_1/2
          registers which are located at offsets 0xbf8 and 0xbfc

  interrupts:
    items:
      - description: The error interrupt

  fsl,qman-portals:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: ref fsl,qman-port.yaml

  fsl,liodn:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    description:
      See pamu.txt, PAMU property used for static LIODN assignment

  fsl,iommu-parent:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      See pamu.txt, PAMU property used for dynamic LIODN assignment

  clocks:
    maxItems: 1
    description:
      Reference input clock. Its frequency is half of the platform clock

  memory-region:
    maxItems: 2
    description:
      List of phandles referencing the QMan private memory nodes (described
      below). The qman-fqd node must be first followed by qman-pfdr node.
      Only used on ARM Devices connected to a QMan instance via Direct Connect
      Portals (DCP) must link to the respective QMan instance.

  fsl,qman:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    description:
      List of phandle and DCP index pairs, to the QMan instance
      to which this device is connected via the DCP

required:
  - compatible
  - reg
  - interrupts

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    qman: qman@318000 {
        compatible = "fsl,qman";
        reg = <0x318000 0x1000>;
        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 3>;
        fsl,liodn = <0x16>;
        fsl,qman-portals = <&qportals>;
        memory-region = <&qman_fqd &qman_pfdr>;
        clocks = <&platform_pll 1>;
    };