# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/soc/fsl/fsl,qman-fqd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: QMan Private Memory Nodes maintainers: - Frank Li description: | QMan requires two contiguous range of physical memory used for the backing store for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). This memory is reserved/allocated as a node under the /reserved-memory node. BMan requires a contiguous range of physical memory used for the backing store for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a node under the /reserved-memory node. The QMan FQD memory node must be named "qman-fqd" The QMan PFDR memory node must be named "qman-pfdr" The BMan FBPR memory node must be named "bman-fbpr" The following constraints are relevant to the FQD and PFDR private memory: - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to 1 GiB - The alignment must be a muliptle of the memory size The size of the FQD and PFDP must be chosen by observing the hardware features configured via the Reset Configuration Word (RCW) and that are relevant to a specific board (e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports, etc.). The size configured in the DT must reflect the hardware capabilities and not the specific needs of an application For additional details about reserved memory regions see reserved-memory/reserved-memory.yaml in dtschema project. properties: $nodename: pattern: '^(qman-fqd|qman-pfdr|bman-fbpr)+$' compatible: enum: - fsl,qman-fqd - fsl,qman-pfdr - fsl,bman-fbpr required: - compatible allOf: - $ref: reserved-memory.yaml unevaluatedProperties: false examples: - | reserved-memory { #address-cells = <2>; #size-cells = <2>; qman-fqd { compatible = "shared-dma-pool"; size = <0 0x400000>; alignment = <0 0x400000>; no-map; }; };