# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Socionext UniPhier PCIe PHY description: | This describes the devicetree bindings for PHY interface built into PCIe controller implemented on Socionext UniPhier SoCs. maintainers: - Kunihiko Hayashi properties: compatible: enum: - socionext,uniphier-pro5-pcie-phy - socionext,uniphier-ld20-pcie-phy - socionext,uniphier-pxs3-pcie-phy - socionext,uniphier-nx1-pcie-phy reg: maxItems: 1 "#phy-cells": const: 0 clocks: minItems: 1 maxItems: 2 clock-names: minItems: 1 maxItems: 2 resets: minItems: 1 maxItems: 2 reset-names: minItems: 1 maxItems: 2 socionext,syscon: $ref: /schemas/types.yaml#/definitions/phandle description: A phandle to system control to set configurations for phy allOf: - if: properties: compatible: contains: const: socionext,uniphier-pro5-pcie-phy then: properties: clocks: minItems: 2 maxItems: 2 clock-names: items: - const: gio - const: link resets: minItems: 2 maxItems: 2 reset-names: items: - const: gio - const: link else: properties: clocks: maxItems: 1 clock-names: const: link resets: maxItems: 1 reset-names: const: link required: - compatible - reg - "#phy-cells" - clocks - clock-names - resets - reset-names additionalProperties: false examples: - | pcie_phy: phy@66038000 { compatible = "socionext,uniphier-ld20-pcie-phy"; reg = <0x66038000 0x4000>; #phy-cells = <0>; clock-names = "link"; clocks = <&sys_clk 24>; reset-names = "link"; resets = <&sys_rst 24>; socionext,syscon = <&soc_glue>; };