# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: DesignWare based PCIe controller on Rockchip SoCs maintainers: - Shawn Lin - Simon Xue - Heiko Stuebner description: |+ RK3568 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in snps,dw-pcie.yaml. allOf: - $ref: /schemas/pci/snps,dw-pcie.yaml# properties: compatible: oneOf: - const: rockchip,rk3568-pcie - items: - enum: - rockchip,rk3588-pcie - const: rockchip,rk3568-pcie reg: items: - description: Data Bus Interface (DBI) registers - description: Rockchip designed configuration registers - description: Config registers reg-names: items: - const: dbi - const: apb - const: config clocks: minItems: 5 items: - description: AHB clock for PCIe master - description: AHB clock for PCIe slave - description: AHB clock for PCIe dbi - description: APB clock for PCIe - description: Auxiliary clock for PCIe - description: PIPE clock clock-names: minItems: 5 items: - const: aclk_mst - const: aclk_slv - const: aclk_dbi - const: pclk - const: aux - const: pipe msi-map: true num-lanes: true phys: maxItems: 1 phy-names: const: pcie-phy power-domains: maxItems: 1 ranges: minItems: 2 maxItems: 3 resets: minItems: 1 maxItems: 2 reset-names: oneOf: - const: pipe - items: - const: pwr - const: pipe vpcie3v3-supply: true required: - compatible - reg - reg-names - clocks - clock-names - msi-map - num-lanes - phys - phy-names - power-domains - resets - reset-names unevaluatedProperties: false examples: - | bus { #address-cells = <2>; #size-cells = <2>; pcie3x2: pcie@fe280000 { compatible = "rockchip,rk3568-pcie"; reg = <0x3 0xc0800000 0x0 0x390000>, <0x0 0xfe280000 0x0 0x10000>, <0x3 0x80000000 0x0 0x100000>; reg-names = "dbi", "apb", "config"; bus-range = <0x20 0x2f>; clocks = <&cru 143>, <&cru 144>, <&cru 145>, <&cru 146>, <&cru 147>; clock-names = "aclk_mst", "aclk_slv", "aclk_dbi", "pclk", "aux"; device_type = "pci"; linux,pci-domain = <2>; max-link-speed = <2>; msi-map = <0x2000 &its 0x2000 0x1000>; num-lanes = <2>; phys = <&pcie30phy>; phy-names = "pcie-phy"; power-domains = <&power 15>; ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>, <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>; resets = <&cru 193>; reset-names = "pipe"; #address-cells = <3>; #size-cells = <2>; }; }; ...