# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/sprd,sdhci-r11.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Spreadtrum SDHCI controller

maintainers:
  - Orson Zhai <orsonzhai@gmail.com>
  - Baolin Wang <baolin.wang7@gmail.com>
  - Chunyan Zhang <zhang.lyra@gmail.com>

properties:
  compatible:
    const: sprd,sdhci-r11

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    minItems: 2
    items:
      - description: SDIO source clock
      - description: gate clock for enabling/disabling the device
      - description: gate clock controlling the device for some special platforms (optional)

  clock-names:
    minItems: 2
    items:
      - const: sdio
      - const: enable
      - const: 2x_enable

  pinctrl-0:
    description: default/high speed pin control
    maxItems: 1

  pinctrl-1:
    description: UHS mode pin control
    maxItems: 1

  pinctrl-names:
    minItems: 1
    items:
      - const: default
      - const: state_uhs

patternProperties:
  "^sprd,phy-delay-(legacy|mmc-(ddr52|highspeed|hs[24]00|hs400es)|sd-(highspeed|uhs-sdr(50|104)))$":
    $ref: /schemas/types.yaml#/definitions/uint32-array
    items:
      - description: clock data write line delay value
      - description: clock read command line delay value
      - description: clock read data positive edge delay value
      - description: clock read data negative edge delay value
    description:
      PHY DLL delays are used to delay the data valid window, and align
      the window to the sampling clock. Each cell's delay value unit is
      cycle of the PHY clock.

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names

allOf:
  - $ref: sdhci-common.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/sprd,sc9860-clk.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>

    mmc@50430000 {
      compatible = "sprd,sdhci-r11";
      reg = <0x50430000 0x1000>;
      interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;

      clocks = <&aon_prediv CLK_EMMC_2X>,
               <&apahb_gate CLK_EMMC_EB>,
               <&aon_gate CLK_EMMC_2X_EN>;
      clock-names = "sdio", "enable", "2x_enable";

      pinctrl-0 = <&sd0_pins_default>;
      pinctrl-1 = <&sd0_pins_uhs>;
      pinctrl-names = "default", "state_uhs";

      bus-width = <8>;
      cap-mmc-hw-reset;
      mmc-hs400-enhanced-strobe;
      mmc-hs400-1_8v;
      mmc-hs200-1_8v;
      mmc-ddr-1_8v;
      non-removable;
      no-sdio;
      no-sd;

      sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
      sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
      sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
      sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
    };
...