# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale Layerscape External Interrupt Controller

maintainers:
  - Shawn Guo <shawnguo@kernel.org>

description: |
  Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
  LX216xA) support inverting the polarity of certain external interrupt
  lines.

properties:
  compatible:
    oneOf:
      - enum:
          - fsl,ls1021a-extirq
          - fsl,ls1043a-extirq
          - fsl,ls1088a-extirq
      - items:
          - enum:
              - fsl,ls1046a-extirq
          - const: fsl,ls1043a-extirq
      - items:
          - enum:
              - fsl,ls2080a-extirq
              - fsl,lx2160a-extirq
          - const: fsl,ls1088a-extirq

  '#interrupt-cells':
    const: 2

  '#address-cells':
    const: 0

  interrupt-controller: true

  reg:
    maxItems: 1
    description:
      Specifies the Interrupt Polarity Control Register (INTPCR) in the
      SCFG or the External Interrupt Control Register (IRQCR) in the ISC.

  interrupt-map:
    description: Specifies the mapping from external interrupts to GIC interrupts.

  interrupt-map-mask: true

required:
  - compatible
  - '#interrupt-cells'
  - '#address-cells'
  - interrupt-controller
  - reg
  - interrupt-map
  - interrupt-map-mask

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - fsl,ls1021a-extirq
    then:
      properties:
        interrupt-map:
          minItems: 6
          maxItems: 6
        interrupt-map-mask:
          items:
            - const: 0x7
            - const: 0
  - if:
      properties:
        compatible:
          contains:
            enum:
              - fsl,ls1043a-extirq
              - fsl,ls1046a-extirq
    then:
      properties:
        interrupt-map:
          minItems: 12
          maxItems: 12
        interrupt-map-mask:
          items:
            - const: 0xf
            - const: 0

  - if:
      properties:
        compatible:
          contains:
            enum:
              - fsl,ls1088a-extirq
              - fsl,ls2080a-extirq
              - fsl,lx2160a-extirq
# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
# function to parser interrupt-map. So it doesn't consider '#address-size'
# in parent interrupt controller, such as GIC.
#
# When dt-binding verify interrupt-map, item data matrix is spitted at
# incorrect position. Remove interrupt-map restriction because it always
# wrong.

    then:
      properties:
        interrupt-map-mask:
          items:
            - const: 0xf
            - const: 0

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    interrupt-controller@1ac {
            compatible = "fsl,ls1021a-extirq";
            #interrupt-cells = <2>;
            #address-cells = <0>;
            interrupt-controller;
            reg = <0x1ac 4>;
            interrupt-map =
                    <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
                    <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
                    <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
                    <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
                    <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
                    <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-map-mask = <0x7 0x0>;
    };