For all of the nmem device attributes under ``nfit/*``, see the 'NVDIMM Firmware Interface Table (NFIT)' section in the ACPI specification (http://www.uefi.org/specifications) for more details. What: /sys/bus/nd/devices/nmemX/nfit/serial Date: Jun, 2015 KernelVersion: v4.2 Contact: linux-nvdimm@lists.01.org Description: (RO) Serial number of the NVDIMM (non-volatile dual in-line memory module), assigned by the module vendor. What: /sys/bus/nd/devices/nmemX/nfit/handle Date: Apr, 2015 KernelVersion: v4.2 Contact: linux-nvdimm@lists.01.org Description: (RO) The address (given by the _ADR object) of the device on its parent bus of the NVDIMM device containing the NVDIMM region. What: /sys/bus/nd/devices/nmemX/nfit/device Date: Apr, 2015 KernelVersion: v4.1 Contact: linux-nvdimm@lists.01.org Description: (RO) Device id for the NVDIMM, assigned by the module vendor. What: /sys/bus/nd/devices/nmemX/nfit/rev_id Date: Jun, 2015 KernelVersion: v4.2 Contact: linux-nvdimm@lists.01.org Description: (RO) Revision of the NVDIMM, assigned by the module vendor. What: /sys/bus/nd/devices/nmemX/nfit/phys_id Date: Apr, 2015 KernelVersion: v4.2 Contact: linux-nvdimm@lists.01.org Description: (RO) Handle (i.e., instance number) for the SMBIOS (system management BIOS) Memory Device structure describing the NVDIMM containing the NVDIMM region. What: /sys/bus/nd/devices/nmemX/nfit/flags Date: Jun, 2015 KernelVersion: v4.2 Contact: linux-nvdimm@lists.01.org Description: (RO) The flags in the NFIT memory device sub-structure indicate the state of the data on the nvdimm relative to its energy source or last "flush to persistence". The attribute is a translation of the 'NVDIMM State Flags' field in section 5.2.25.3 'NVDIMM Region Mapping' Structure of the ACPI specification 6.2. The health states are "save_fail", "restore_fail", "flush_fail", "not_armed", "smart_event", "map_fail" and "smart_notify". What: /sys/bus/nd/devices/nmemX/nfit/format What: /sys/bus/nd/devices/nmemX/nfit/format1 What: /sys/bus/nd/devices/nmemX/nfit/formats Date: Apr, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) The interface codes indicate support for persistent memory mapped directly into system physical address space and / or a block aperture access mechanism to the NVDIMM media. The 'formats' attribute displays the number of supported interfaces. This layout is compatible with existing libndctl binaries that only expect one code per-dimm as they will ignore nmemX/nfit/formats and nmemX/nfit/formatN. What: /sys/bus/nd/devices/nmemX/nfit/vendor Date: Apr, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) Vendor id of the NVDIMM. What: /sys/bus/nd/devices/nmemX/nfit/dsm_mask Date: May, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) The bitmask indicates the supported device specific control functions relative to the NVDIMM command family supported by the device What: /sys/bus/nd/devices/nmemX/nfit/family Date: Apr, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) Displays the NVDIMM family command sets. Values 0, 1, 2 and 3 correspond to NVDIMM_FAMILY_INTEL, NVDIMM_FAMILY_HPE1, NVDIMM_FAMILY_HPE2 and NVDIMM_FAMILY_MSFT respectively. See the specifications for these command families here: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf https://github.com/HewlettPackard/hpe-nvm/blob/master/Documentation/ https://msdn.microsoft.com/library/windows/hardware/mt604741" What: /sys/bus/nd/devices/nmemX/nfit/id Date: Apr, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) ACPI specification 6.2 section 5.2.25.9, defines an identifier for an NVDIMM, which refelects the id attribute. What: /sys/bus/nd/devices/nmemX/nfit/subsystem_vendor Date: Apr, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) Sub-system vendor id of the NVDIMM non-volatile memory subsystem controller. What: /sys/bus/nd/devices/nmemX/nfit/subsystem_rev_id Date: Apr, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) Sub-system revision id of the NVDIMM non-volatile memory subsystem controller, assigned by the non-volatile memory subsystem controller vendor. What: /sys/bus/nd/devices/nmemX/nfit/subsystem_device Date: Apr, 2016 KernelVersion: v4.7 Contact: linux-nvdimm@lists.01.org Description: (RO) Sub-system device id for the NVDIMM non-volatile memory subsystem controller, assigned by the non-volatile memory subsystem controller vendor. What: /sys/bus/nd/devices/ndbusX/nfit/revision Date: Jun, 2015 KernelVersion: v4.2 Contact: linux-nvdimm@lists.01.org Description: (RO) ACPI NFIT table revision number. What: /sys/bus/nd/devices/ndbusX/nfit/scrub Date: Sep, 2016 KernelVersion: v4.9 Contact: linux-nvdimm@lists.01.org Description: (RW) This shows the number of full Address Range Scrubs (ARS) that have been completed since driver load time. Userspace can wait on this using select/poll etc. A '+' at the end indicates an ARS is in progress Writing a value of 1 triggers an ARS scan. What: /sys/bus/nd/devices/ndbusX/nfit/hw_error_scrub Date: Sep, 2016 KernelVersion: v4.9 Contact: linux-nvdimm@lists.01.org Description: (RW) Provides a way to toggle the behavior between just adding the address (cache line) where the MCE happened to the poison list and doing a full scrub. The former (selective insertion of the address) is done unconditionally. This attribute can have the following values written to it: '0': Switch to the default mode where an exception will only insert the address of the memory error into the poison and badblocks lists. '1': Enable a full scrub to happen if an exception for a memory error is received. What: /sys/bus/nd/devices/ndbusX/nfit/dsm_mask Date: Jun, 2017 KernelVersion: v4.13 Contact: linux-nvdimm@lists.01.org Description: (RO) The bitmask indicates the supported bus specific control functions. See the section named 'NVDIMM Root Device _DSMs' in the ACPI specification. What: /sys/bus/nd/devices/ndbusX/nfit/firmware_activate_noidle Date: Apr, 2020 KernelVersion: v5.8 Contact: linux-nvdimm@lists.01.org Description: (RW) The Intel platform implementation of firmware activate support exposes an option let the platform force idle devices in the system over the activation event, or trust that the OS will do it. The safe default is to let the platform force idle devices since the kernel is already in a suspend state, and on the chance that a driver does not properly quiesce bus-mastering after a suspend callback the platform will handle it. However, the activation might abort if, for example, platform firmware determines that the activation time exceeds the max PCI-E completion timeout. Since the platform does not know whether the OS is running the activation from a suspend context it aborts, but if the system owner trusts driver suspend callback to be sufficient then 'firmware_activation_noidle' can be enabled to bypass the activation abort. What: /sys/bus/nd/devices/regionX/nfit/range_index Date: Jun, 2015 KernelVersion: v4.2 Contact: linux-nvdimm@lists.01.org Description: (RO) A unique number provided by the BIOS to identify an address range. Used by NVDIMM Region Mapping Structure to uniquely refer to this structure. Value of 0 is reserved and not used as an index.