/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2006 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #ifdef TRAPTRACE int mach_htraptrace_enable = 1; #else int mach_htraptrace_enable = 0; #endif int htrap_tr0_inuse = 0; extern char htrap_tr0[]; /* prealloc buf for boot cpu */ caddr_t mmu_fault_status_area; extern void sfmmu_set_tsbs(void); /* * CPU IDLE optimization variables/routines */ static int enable_halt_idle_cpus = 1; void setup_trap_table(void) { caddr_t mmfsa_va; extern caddr_t mmu_fault_status_area; mmfsa_va = mmu_fault_status_area + (MMFSA_SIZE * CPU->cpu_id); intr_init(CPU); /* init interrupt request free list */ setwstate(WSTATE_KERN); set_mmfsa_scratchpad(mmfsa_va); prom_set_mmfsa_traptable(&trap_table, va_to_pa(mmfsa_va)); sfmmu_set_tsbs(); } void phys_install_has_changed(void) { } /* * Halt the present CPU until awoken via an interrupt */ static void cpu_halt(void) { cpu_t *cpup = CPU; processorid_t cpun = cpup->cpu_id; cpupart_t *cp = cpup->cpu_part; int hset_update = 1; uint_t s; /* * If this CPU is online, and there's multiple CPUs * in the system, then we should notate our halting * by adding ourselves to the partition's halted CPU * bitmap. This allows other CPUs to find/awaken us when * work becomes available. */ if (CPU->cpu_flags & CPU_OFFLINE || ncpus == 1) hset_update = 0; /* * Add ourselves to the partition's halted CPUs bitmask * and set our HALTED flag, if necessary. * * When a thread becomes runnable, it is placed on the queue * and then the halted cpuset is checked to determine who * (if anyone) should be awoken. We therefore need to first * add ourselves to the halted cpuset, and then check if there * is any work available. */ if (hset_update) { cpup->cpu_disp_flags |= CPU_DISP_HALTED; membar_producer(); CPUSET_ATOMIC_ADD(cp->cp_haltset, cpun); } /* * Check to make sure there's really nothing to do. * Work destined for this CPU may become available after * this check. We'll be notified through the clearing of our * bit in the halted CPU bitmask, and a poke. */ if (disp_anywork()) { if (hset_update) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); } return; } /* * We're on our way to being halted. * * Disable interrupts now, so that we'll awaken immediately * after halting if someone tries to poke us between now and * the time we actually halt. * * We check for the presence of our bit after disabling interrupts. * If it's cleared, we'll return. If the bit is cleared after * we check then the poke will pop us out of the halted state. * * The ordering of the poke and the clearing of the bit by cpu_wakeup * is important. * cpu_wakeup() must clear, then poke. * cpu_halt() must disable interrupts, then check for the bit. */ s = disable_vec_intr(); if (hset_update && !CPU_IN_SET(cp->cp_haltset, cpun)) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; enable_vec_intr(s); return; } /* * The check for anything locally runnable is here for performance * and isn't needed for correctness. disp_nrunnable ought to be * in our cache still, so it's inexpensive to check, and if there * is anything runnable we won't have to wait for the poke. */ if (cpup->cpu_disp->disp_nrunnable != 0) { if (hset_update) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); } enable_vec_intr(s); return; } /* * Halt the strand */ (void) hv_cpu_yield(); /* * We're no longer halted */ enable_vec_intr(s); if (hset_update) { cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); } } /* * If "cpu" is halted, then wake it up clearing its halted bit in advance. * Otherwise, see if other CPUs in the cpu partition are halted and need to * be woken up so that they can steal the thread we placed on this CPU. * This function is only used on MP systems. */ static void cpu_wakeup(cpu_t *cpu, int bound) { uint_t cpu_found; int result; cpupart_t *cp; cp = cpu->cpu_part; if (CPU_IN_SET(cp->cp_haltset, cpu->cpu_id)) { /* * Clear the halted bit for that CPU since it will be * poked in a moment. */ CPUSET_ATOMIC_DEL(cp->cp_haltset, cpu->cpu_id); /* * We may find the current CPU present in the halted cpuset * if we're in the context of an interrupt that occurred * before we had a chance to clear our bit in cpu_halt(). * Poking ourself is obviously unnecessary, since if * we're here, we're not halted. */ if (cpu != CPU) poke_cpu(cpu->cpu_id); return; } else { /* * This cpu isn't halted, but it's idle or undergoing a * context switch. No need to awaken anyone else. */ if (cpu->cpu_thread == cpu->cpu_idle_thread || cpu->cpu_disp_flags & CPU_DISP_DONTSTEAL) return; } /* * No need to wake up other CPUs if the thread we just enqueued * is bound. */ if (bound) return; /* * See if there's any other halted CPUs. If there are, then * select one, and awaken it. * It's possible that after we find a CPU, somebody else * will awaken it before we get the chance. * In that case, look again. */ do { CPUSET_FIND(cp->cp_haltset, cpu_found); if (cpu_found == CPUSET_NOTINSET) return; ASSERT(cpu_found >= 0 && cpu_found < NCPU); CPUSET_ATOMIC_XDEL(cp->cp_haltset, cpu_found, result); } while (result < 0); if (cpu_found != CPU->cpu_id) poke_cpu(cpu_found); } void mach_cpu_halt_idle() { if (enable_halt_idle_cpus) { idle_cpu = cpu_halt; disp_enq_thread = cpu_wakeup; } } int ndata_alloc_mmfsa(struct memlist *ndata) { size_t size; size = MMFSA_SIZE * max_ncpus; mmu_fault_status_area = ndata_alloc(ndata, size, ecache_alignsize); if (mmu_fault_status_area == NULL) return (-1); return (0); } void mach_memscrub(void) { /* no memscrub support for sun4v for now */ } void mach_fpras() { /* no fpras support for sun4v for now */ } void mach_hw_copy_limit(void) { /* HW copy limits set by individual CPU module */ } /* * We need to enable soft ring functionality on Niagara platform since * one strand can't handle interrupts for a 1Gb NIC. Set the tunable * ip_squeue_soft_ring by default on this platform. We can also set * ip_threads_per_cpu to track number of threads per core. The variables * themselves are defined in space.c and used by IP module */ extern uint_t ip_threads_per_cpu; extern boolean_t ip_squeue_soft_ring; void startup_platform(void) { ip_squeue_soft_ring = B_TRUE; } /* * This function sets up hypervisor traptrace buffer * This routine is called by the boot cpu only */ void mach_htraptrace_setup(int cpuid) { TRAP_TRACE_CTL *ctlp; int bootcpuid = getprocessorid(); /* invoked on boot cpu only */ if (mach_htraptrace_enable && ((cpuid != bootcpuid) || !htrap_tr0_inuse)) { ctlp = &trap_trace_ctl[cpuid]; ctlp->d.hvaddr_base = (cpuid == bootcpuid) ? htrap_tr0 : contig_mem_alloc_align(HTRAP_TSIZE, HTRAP_TSIZE); if (ctlp->d.hvaddr_base == NULL) { ctlp->d.hlimit = 0; ctlp->d.hpaddr_base = NULL; cmn_err(CE_WARN, "!cpu%d: failed to allocate HV " "traptrace buffer", cpuid); } else { ctlp->d.hlimit = HTRAP_TSIZE; ctlp->d.hpaddr_base = va_to_pa(ctlp->d.hvaddr_base); } } } /* * This function enables or disables the hypervisor traptracing */ void mach_htraptrace_configure(int cpuid) { uint64_t ret; uint64_t prev_buf, prev_bufsize; uint64_t prev_enable; uint64_t size; TRAP_TRACE_CTL *ctlp; ctlp = &trap_trace_ctl[cpuid]; if (mach_htraptrace_enable) { if ((ctlp->d.hvaddr_base != NULL) && ((ctlp->d.hvaddr_base != htrap_tr0) || (!htrap_tr0_inuse))) { ret = hv_ttrace_buf_info(&prev_buf, &prev_bufsize); if ((ret == H_EOK) && (prev_bufsize != 0)) { cmn_err(CE_CONT, "!cpu%d: previous HV traptrace buffer of " "size 0x%lx at address 0x%lx", cpuid, prev_bufsize, prev_buf); } ret = hv_ttrace_buf_conf(ctlp->d.hpaddr_base, ctlp->d.hlimit / (sizeof (struct htrap_trace_record)), &size); if (ret == H_EOK) { ret = hv_ttrace_enable(\ (uint64_t)TRAP_TENABLE_ALL, &prev_enable); if (ret != H_EOK) { cmn_err(CE_WARN, "!cpu%d: HV traptracing not " "enabled, ta: 0x%x returned error: " "%ld", cpuid, TTRACE_ENABLE, ret); } else { if (ctlp->d.hvaddr_base == htrap_tr0) htrap_tr0_inuse = 1; } } else { cmn_err(CE_WARN, "!cpu%d: HV traptrace buffer not " "configured, ta: 0x%x returned error: %ld", cpuid, TTRACE_BUF_CONF, ret); } /* * set hvaddr_base to NULL when traptrace buffer * registration fails */ if (ret != H_EOK) { ctlp->d.hvaddr_base = NULL; ctlp->d.hlimit = 0; ctlp->d.hpaddr_base = NULL; } } } else { ret = hv_ttrace_buf_info(&prev_buf, &prev_bufsize); if ((ret == H_EOK) && (prev_bufsize != 0)) { ret = hv_ttrace_enable((uint64_t)TRAP_TDISABLE_ALL, &prev_enable); if (ret == H_EOK) { if (ctlp->d.hvaddr_base == htrap_tr0) htrap_tr0_inuse = 0; ctlp->d.hvaddr_base = NULL; ctlp->d.hlimit = 0; ctlp->d.hpaddr_base = NULL; } else cmn_err(CE_WARN, "!cpu%d: HV traptracing is not disabled, " "ta: 0x%x returned error: %ld", cpuid, TTRACE_ENABLE, ret); } } } /* * This function cleans up the hypervisor traptrace buffer */ void mach_htraptrace_cleanup(int cpuid) { if (mach_htraptrace_enable) { TRAP_TRACE_CTL *ctlp; caddr_t httrace_buf_va; ASSERT(cpuid < max_ncpus); ctlp = &trap_trace_ctl[cpuid]; httrace_buf_va = ctlp->d.hvaddr_base; if (httrace_buf_va == htrap_tr0) { bzero(httrace_buf_va, HTRAP_TSIZE); } else if (httrace_buf_va != NULL) { contig_mem_free(httrace_buf_va, HTRAP_TSIZE); } ctlp->d.hvaddr_base = NULL; ctlp->d.hlimit = 0; ctlp->d.hpaddr_base = NULL; } }